Chemical element contents and speciations in bottom sediments from the Transpacific profile

The paper deals with regularities of distribution of iron, manganese, copper, nickel, and vanadium in interstitial waters from different lithofacies types of bottom sediments on the profile from the coast of Mexico to the Wake Atoll in the Pacific Ocean. With increasing distance from the shore and with transition from reduced coastal sediments to oxidized deep-sea red clays concentration of iron and manganese in the interstitial waters greatly decreases. Elevated concentration of dissolved iron (0.34 mg/l) was observed only in highly reduced terrigenous sediments from the shelf and continental slope of Mexico. The highest concentrations of manganese (13.2 mg/l) were measured in hemipelagic carbonate-siliceous-clayey sediments. Compared to Pacific seawater interstitial waters are enriched in Fe, Mn, Cu, Ni, V. Interstitial waters contain only from 0.000004 to 1.2% of total contents of these elements in bottom sediments.

Análisis comparativo de series temporales de precio de diferentes metales : obtención de una serie -resumen

El objetivo de este proyecto de investigación es analizar el conjunto de las diez series temporales, relativas a los precios de diez metales (plata, aluminio, oro, cobre, níquel, paladio, plomo, platino, estaño y zinc), comprendidos en el periodo de enero de 2008 a septiembre de 2013, con el objetivo de reducir la dimensionalidad del conjunto de datos y facilitar la comparación de los mismos y la predicción de valores futuros. Para ello pretendemos aplicar una metodología, que nos permitirá deducir, a partir de una serie resumen y de unos coeficientes multiplicativos, la evolución del comportamiento de cualquier otro metal. Pese a la escasísima documentación existente al respecto, se valorará e intentará aplicarse una reciente metodología denominada “Metodología del haz de rectas” Como herramienta de trabajo para los programas informáticos desarrollados y para representar las gráficas asociadas al proyecto, se utilizó Matlab®, habida cuenta de su enorme potencia y por disponer de un lenguaje de programación sencillo y lo suficientemente versátil para las tareas que necesitamos. Abstract. The objective of this research project is to analyze the set of ten time series on prices of the ten metals (silver, aluminum, gold, copper, nickel, palladium, lead, platinum, tin and zinc), included in the period January 2008 to September 2013, with the aim of reducing the dimensionality of the data set and to facilitate comparison of the data and the prediction of future values To apply this methodology, allowing us to predict, from a series summarizes the evolution of the behavior of any other metal. This methodology is called "straight beam Methodology" As a tool for developing computer software and associated graphs to represent the project, Matlab® was used in view of its enormous power and have a simple programming language and versatile enough for the tasks we need

Estudo do comportamento eletroquímico da liga UNS N07090 em diferentes concentrações de ácido sulfúrico.

Ligas de níquel têm atualmente uma vasta gama de aplicações, sendo a agressividade do meio e as elevadas temperaturas que estas ligas suportam, um diferencial excepcional. A liga UNS N07090, objeto deste trabalho, encontra aplicações muito diversas, entre elas turbocompressores, sistemas de exaustão e de pós-tratamento de motores a diesel. Nestas aplicações a liga está exposta a gases, que ao condensarem formam ácido sulfúrico (H2SO4). Torna-se, assim, importante, o conhecimento da resistência à corrosão da liga nesse meio. O presente trabalho tem como objetivo caracterizar o comportamento eletroquímico da liga através de curvas de polarização potenciodinâmica em diferentes concentrações de ácido sulfúrico. Observou-se que quanto maior a concentração de ácido, maior é a corrosão da liga. Este fato pode ser discutido pela adsorção do íon sulfato (SO42-), que prejudica tanto a formação quanto a cinética de crescimento da película passiva do níquel. Em contrapartida, a presença de Cr na liga UNS N07090 apresentou um benefício sobre a resistência à corrosão desta muito acima do esperado, influenciando de forma direta as curvas de polarização da liga e mantendo-a em condição de elevada resistência à corrosão em detrimento do pior desempenho observado em outros elementos pertecentes à liga, como Co, Al e Ti. Tempos de imersão de 24h em ácido sulfúrico elevam discretamente os parâmetros de corrosão da liga, mantendo-os, no entanto em patamares bastante baixos, permitindo finalmente concluir que a liga UNS N07090, quando exposta a concentrações que variam de 1M a 4M H2SO4, a 25°C, apresenta boa resistência à corrosão e que esta não se altera com o tempo de exposição. A análise dos resultados mostrou que o processo corrosivo é controlado por reações catódicas de sulfato e hidrogênio, as quais podem ter diferentes contribuições dependendo da concentração do ácido e do tempo de imersão da liga UNS N07090 no meio corrosivo.

Fatores de bioconcentração e disponibilidade de bário, cádmio, cobre, níquel e zinco em solos e em culturas de interesse agronômico

Os elementos potencialmente tóxicos (EPTs) estão presentes nos solos em concentrações dependentes do material de origem e das ações antrópicas. A adição de EPTs ao solo pelas atividades antrópicas pode ocasionar risco à saúde humana, já que estes elementos podem ser acumulados no organismo por meio do contato dérmico com o solo, da inalação de partículas em suspensão, de ingestão de solo e de alimentos contaminados. A contaminação dos alimentos ocorre pelo cultivo em áreas com alta biodisponibilidade de EPTs, e nessa condição ocorre absorção e translocação para a parte aérea, com possível acúmulo dos metais nas porções comestíveis, como raízes, frutos e grãos. A biodisponibilidade dos EPTs é regulada pelas características químicas dos elementos e por atributos do solo, como a CTC, o pH e a matéria orgânica (MO). Sintomas de toxicidade e alterações morfológicas e fisiológicas podem aparecer dependendo da absorção e da movimentação dos EPTs nas plantas. Objetivou-se neste trabalho avaliar o efeito da adição de bário (Ba), de cádmio (Cd), de cobre (Cu), de níquel (Ni) e de zinco (Zn) em amostras de um Neossolo Quartzarênico e um Latossolo Vermelho distrófico, sob duas condições de saturação por bases (30% e 50 ou 70%, dependendo da cultura), no cultivo de arroz (Oryza sativa), alface (Lactuca sativa), girassol (Helianthus annuus) e tomate (Solanum lycopersicum). Os EPTs nos solos foram extraídos com EPA 3051a, Água Régia, DTPA, Mehlich 1, Mehlich 3, HNO3 (0,43 mol L-1) e CaCl2 (0,01 mol L-1), e seus teores correlacionados com os presentes nas raízes, na parte aérea, nos frutos e com a quantidade acumulada pelas plantas. Os fatores de bioconcentração (FBC) e de transferência (FT) foram calculados para as culturas. O índice SPAD (Soil Plant Analysis Development - Chlorophyll Meter) foi determinado na fase vegetativa da alface, do arroz e do girassol, enquanto a atividade fotossintética foi determinada pelo IRGA (Infrared gas analyzer). Os maiores teores de EPTs foram observados nas plantas cultivadas no Neossolo. As quantidades de Cu, Ni e Zn acumuladas nas plantas apresentaram correlação positiva com os teores extraídos pelo EPA 3051a e pela Água Régia. Os teores extraídos com HNO3 (0,43 mol L-1) apresentaram elevada correlação positiva com os teores reativos extraídos com DTPA e com Mehlich 3, e também com as quantidades de EPTs acumuladas pelas plantas. Os FBCs foram mais altos nos solos com baixa CTC, baixos teores de MO e baixos valores de pH. O arroz apresentou a menor translocação de Cd do sistema radicular para os grãos. O Cu, o Ni e o Zn causaram alterações no desenvolvimento da alface e do girassol, e diminuíram a transpiração e a condutância estomática da alface. O arroz apresentou a menor absorção de EPTs e a maior tolerância ao Ba, ao Cd, ao Ni e ao Zn, no entanto, as plantas apresentaram maiores condutividade estomática e transpiração.

The corrosion of monel and 70-30 cupronickel in hydrofluoric acid /

"Contract No. W-7405-eng-92."

The processing and properties of Hastelloy C /

"May 1964."

The Nicrosil versus Nisil thermocouple : properties and thermoelectric reference data /

Mode of access: Internet.

Fundamental mechanisms affecting service performance of electroplated plastics

Ten grades of ABS and four grades of polypropylene have been plated with various copper + nickel + chromium coatings and subjected to a variety of tests. In corrosion studies the pre-electroplating sequence and plastics type have been shown to influence performance. One ABS pre-electroplating sequence was consistently associated with better corrosion performance; two factors were responsible for this, namely the more severe nature of the etch and the relatively more noble electroless nickel. Statistical analysis has indicated that order of severity of the corrosion tests was static-mobile-CASS, the latter being the least severe. In mechanical tests two properties of ABS and polypropJylene, ductility and impact strength, have been shown to be adversely affected when electrodeposited layers were applied. The cause of this is due to a complex of factors, the most important of which is the notch sensitivity of the plastics. Peel adhesion has been studied on flat panels and also on ones which had a ridge and a valley moulded into one face. High adhesion peaks occurred on the flat face at regions associated with the ridge and valley. The local moulding conditions induced by the features were responsible for this phenonemon. In the main programme the thermal cycling test was shown to be more likely than the peel adhesion test to give an indication of the service performance of electroplated plastics.

Redução in situ de NIO durante a sinterização de misturas NI/NIO produzidas por metalurgia do pó

The nickel alloys are widely used in the production of various materials, especially those that require mechanical strength characteristics associated with resistance to corrosion, for example, the stainless steel. Another use is the production of nickel alloy sintered from powder of metallic nickel. A promising alternative for the production of sintered components of nickel with an important reduction in costs of starting material is the use of mixtures of powders of Ni-NiO. This work aimed to study in situ reduction of NiO during sintering mixtures of Ni / NiO produced by powder metallurgy. The nickel mixtures have been processed by the technique of powder metallurgy and were pre-sintered in an oven under plasma reducing atmosphere of hydrogen. Mixtures Ni +15%NiO, Ni +25%NiO and Ni +35%NiO were studied and compared with samples consisting only of metallic Ni. Dilatometric tests were performed to study the sintering conditions of the mixtures. The consolidated material was analyzed for their microstructure and microhardness. Dilatometry graphs showed that the addition of nickel oxide in all compositions the active sintering the mixtures studied. In tests of microhardness indentations were made at different points of the sample surface. All compositions showed microhardness values close to the consolidated material from metallic nickel. However, sample containing Ni+35% NiO, showed a large dispersion of the values of microhardness tests performed at different points of the sample surface. Microstructural analysis of the material showed a higher concentration of voids and the presence of oxides in the waste composition of the mixtures Ni 35% NiO. The samples containing Ni+15%NiO showed microstructural characteristics and mechanical properties similar to metallic nickel consolidated under the same conditions of the compositions studied in this work and therefore had great potential for production of sintered nickel alloys

Geochemistry of tetrapyrrole, carotenoid, and perylene pigments in sediments at DSDP Holes 63-467 and 63-471

Twenty-one core samples from DSDP/IPOD Leg 63 were analyzed for products of chlorophyll diagenesis. In addition to the tetrapyrrole pigments, perylene and carotenoid pigments were isolated and identified. The 16 core samples from the San Miguel Gap site (467) and the five from the Baja California borderland location (471) afforded the unique opportunity of examining tetrapyrrole diagenesis in clay-rich marine sediments that are very high in total organic matter. The chelation reaction, whereby free-base porphyrins give rise to metalloporphyrins (viz., nickel), is well documented within the downhole sequence of sediments from the San Miguel Gap (Site 467). Recognition of unique arrays of highly dealkylated copper and nickel ETIO-porphyrins, exhibiting nearly identical carbonnumber homologies (viz., C-23 to C-30; mode = C-26), enabled subtraction of this component (thought to be derived from an allochthonous source) and thus permitted description of the actual in situ diagenesis of autochthonous chlorophyll derivatives.

Annotated record of the detailed examination of Mn deposits from R/V Moana Wave Cruise Mn-74-01 stations

Cruise MN-74-01 of the R/V Moana Wave was the first part of the field work of the NSF-IDOE Inter-University Ferromanganese Research Program in 1974. This program was designed to investigate the origin, growth, and distribution of copper/nickel-rich manganese nodules in the Pacific Ocean. The field effort was designed to satisfy sample requirements of the 15 principal investigators, while increasing general knowledge of the copper/nickel-rich nodule deposits of the equatorial Pacific. This report is the first of a series of cruise reports designed to assist sample requests for documented nodules, sediment, and water samples so the laboratory results can be realistically compared and related to the environment of nodule growth.

Annotated record and chemical analysis of manganese nodules from R/V Moana Wave Cruise Mn-74-01 and Mn-74-02 stations

Cruise Mn-74-02 of the R/V MOANA WAVE was the second part of the field work of the NSF/IDOE Inter-University Ferromanganese Research Program in 1974, and we gratefully acknowledge the support of the office for the International Decade of Ocean Exploration and the Office of Oceanographic Facilities and Support. This program was designed to investigate the origin, growth, and distribution of copper/nickel-rich manganese nodules in the Pacific Ocean. The field effort was designed to satisfy sample requirements of the fifteen principal investigators, while increasing general knowledge of the copper/nickel-rich nodule deposits of the equatorial Pacific. This report is the second of a series of cruise reports designed to assist sample requests for documented nodules, sediment, and water samples so that laboratory results can be realistically compared and related to the environment of nodule growth. Nodule samples and bathymetric and navigational data are archived at the Hawaii Institute of Geophysics, University of Hawaii. Bulk chemical analyses of nodules and reduction of survey data were carried out at Hawaii. Sediment cores were stored at the University of Hawaii and at Scripps Institution of Oceanography. The SIO analytical facility provided stratigraphic data on sediment chemistry.