Reflexos da clarificação do caldo de cana com moringa sobre compostos inorgânicos do açúcar VHP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e caracterização de novos híbridos orgânicos-inorgânicos baseados em carboximetilcelulose/polifosfato de sódio dopados com 'Eu'Cl IND.3

Organic- inorganic hybrid (HOI) are materials prepared with the combination of inorganic and organic components. The properties of a hybrid material are unique, not being the sum of each individual component added. This occurs because there is a synergism that depends of the chemical nature of organic and inorganic components, of the size and morphology of their domains. The sodium carboxymethylcellulose (CMC) it's an anionic polymer obtained of the cellulose, very soluble in water in which forms both solutions themselves and gels. The sodium polyphosphate (NaPO3)n, known commercially as Graham Salt is the only polyphosphate soluble in water, and it's the polyphosphate with the longest chain. At the present work it was prepared and characterized new phosphate organic- inorganic hybrids films of carboxymethylcellulose / sodium phosphate and luminescent films of CMC/NaPO3 doped with europium chloride (EuCl3). The films where prepared in several proportions. At first, it was set the amount of water to be used and the amount of carboxymethylcellulose, changing the concentrations of sodium polyphosphate and europium chloride. After pre-establishing concentrations, for each film, the components were submitted to constant agitation and subsequent drying. The inorganic-organic hybrid films were characterized by, TG, DR-X, DMA, FT-IR, UV-Vis-NIR, RMN 31P e 13C and at last, a study of luminescence was made. The hybrid films obtained are transparent and macroscopically homogeneous, however, the MET measures showed the formation of micro-islands of polyphosphate along the material, this fact indicates a bigger fragmentation of the films and this is verified by DMA analysis which shows a smaller resistance of the film with the increase of the concentration of phosphate. Both spectrum FT-IR and RMN analysis of the films, don't show the formation of new bands of their precursors, CMC e NaPO3,....

Estrutura e funcionamento da alça microbiana nos sedimentos da Baía do Araçá, São Sebastião - SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Emprego de carvão ativado e resinas de troca ionica na remoção de substâncias orgânicas contaminantes do alcool etílico

This work had with objective to characterize and evaluate the performance of the combined system, involving activated charcoal and ionic exchange resins in the removal of substances organic contaminating of the ethyl alcohol from the fermentation of the cassava starch. To testing was used ethyl alcohol PA 96 oGL, conductivity of 0.90 μS/cm at 25 oC, acidity of 60 mg/L and Barbet test of 43 minutes at 15 oC. The contaminated alcohol was composed of ethyl alcohol additive of higher alcohols, organic acids, ester, diol, aldehydes, ketone and ether. Contaminated alcohol was added 2% activated charcoal and after the adsorption isotherm in ionic exchange resins was tested. The adsorption with activated charcoal was performed in a Water Bath at 30 oC for one hour and a half and shaking. Already adsorption ionic exchange columns occurred at room temperature on columns of 93,4 cm in filling height and diameter of 2.29 cm, for flows of 180 mL/min and 90 mL/min. Samples were collected in the tests with charcoal and with each one of the resins and the following analyses were performed: conductivity, acidity and Barbet test. The medium values for conductivity, acidity and Barbet test after the adsorption in charcoal and cation and anion resins were respectively: conductivity was 240; 354 and 465 μS/cm to 25 oC; acidity of 1.081; 1.103 and 1.062 mg/L and the Barbet test was 21; 20 and 9 minutes to 15 oC. It was observed that the addition of 2% of activated charcoal and the permanence in the columns of adsorption was not sufficient to remove the organic substances contaminating of the ethyl alcohol.

Efeito de fungos contaminantes na produtividade de dois isolados de Agaricus blazei em duas formulações de composto

The effect of the contaminant fungi Trichoderma sp. and Chaetomium olivacearum on the cultivation of the ABL 99/30 and ABL 04/49 isolates of A. blazei in two compost formulations made up with tyfton (Cynodom dactylon) and oat (Avena sativa) was evaluated. The experimental design was a totally randomized 2 x 2 x 3 factorial design with 6 repetitions. The experimental unit consisted of 12-12.5 kg of wet compost. During the spawning, 150 g of Trichoderma sp. and C. olivacearum were added to the compost. The experiment was carried out in a climatized room, with humidity between 75-90% and temperature of 28º C. The productivity averages of the ABL 99/30 isolate of A. blazei were higher than those of ABL 04/49 and Trichoderma sp. and C. olivacearum negatively influenced the production of A. blazei. The different composts (based on tyfton and oat straw) did not influence the production of basidiomata.

Efeito de compostos inorgânicos, herbicidas e extratos foliares no desenvolvimento de microcystis aeruginosa e produção de microcistina

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Preparação e caracterização de híbridos orgânico-inorgânicos à base de epoxí-silica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito de compostos inorgânicos, herbicidas e extratos foliares no desenvolvimento de microcystis aeruginosa e produção de microcistina

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Preparação e caracterização de híbridos orgânico-inorgânicos à base de epoxí-silica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contaminantes tóxicos persistentes: nivel de exposición de la población canaria a través del consumo de productos lácteos

Programa de doctorado: Clínica e investigación terapéutica.

Estudio de contaminantes orgánicos y metales pesados en las costas de Gran Canaria

Programa de doctorado: Ingeniería ambiental y desalinización.

Acondicionador de cargas contaminantes y desequilibradas para su integración en redes eléctricas de baja tensión

Eliminadas las páginas en blanco

Plan de vigilancia y control ambiental de incidentes contaminantes en el Océano Atlántico con influencia en la zona marítima canaria con uso de simulación numérica y métodos de optimización

[ES] El proyecto resumido en el presente artículo muestra la necesidad de implantar planes de prevención y actuación frente a incidentes contaminantes en la zona marítima canaria utilizando modelos de predicción y optimización que aseguren el éxito de aplicación de los mismos. Gracias al desarrollo de las nuevas tecnologías y avances científicos, podemos simular en tiempo real cómo evolucionará un vertido de hidrocarburo que se desplace en la zona marítima canaria. De esta manera, se optimizan las decisiones y los recursos, se minimiza el impacto ambiental en las costas canarias y se mitigan los perjuicios a la sociedad y economía canaria