CADS*: Computer-Aided Development of self-* systems

We present the prototype tool CADS* for the computer-aided development of an important class of self-* systems, namely systems whose components can be modelled as Markov chains. Given a Markov chain representation of the IT components to be included into a self-* system, CADS* automates or aids (a) the development of the artifacts necessary to build the self-* system; and (b) their integration into a fully-operational self-* solution. This is achieved through a combination of formal software development techniques including model transformation, model-driven code generation and dynamic software reconfiguration.

Data analysis methods in optometry: is there a difference between two samples? Part 2.

In this second article, statistical ideas are extended to the problem of testing whether there is a true difference between two samples of measurements. First, it will be shown that the difference between the means of two samples comes from a population of such differences which is normally distributed. Second, the 't' distribution, one of the most important in statistics, will be applied to a test of the difference between two means using a simple data set drawn from a clinical experiment in optometry. Third, in making a t-test, a statistical judgement is made as to whether there is a significant difference between the means of two samples. Before the widespread use of statistical software, this judgement was made with reference to a statistical table. Even if such tables are not used, it is useful to understand their logical structure and how to use them. Finally, the analysis of data, which are known to depart significantly from the normal distribution, will be described.

Data analysis methods in optometry Part 7: multiple linear regression

Multiple regression analysis is a complex statistical method with many potential uses. It has also become one of the most abused of all statistical procedures since anyone with a data base and suitable software can carry it out. An investigator should always have a clear hypothesis in mind before carrying out such a procedure and knowledge of the limitations of each aspect of the analysis. In addition, multiple regression is probably best used in an exploratory context, identifying variables that might profitably be examined by more detailed studies. Where there are many variables potentially influencing Y, they are likely to be intercorrelated and to account for relatively small amounts of the variance. Any analysis in which R squared is less than 50% should be suspect as probably not indicating the presence of significant variables. A further problem relates to sample size. It is often stated that the number of subjects or patients must be at least 5-10 times the number of variables included in the study.5 This advice should be taken only as a rough guide but it does indicate that the variables included should be selected with great care as inclusion of an obviously unimportant variable may have a significant impact on the sample size required.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

Computer aided design and manufacture of form-rolls

Cold roll forming of thin-walled sections is a very useful process in the sheet metal industry. However, the conventional method for the design and manufacture of form-rolls, the special tooling used in the cold roll forming process, is a very time consuming and skill demanding exercise. This thesis describes the establishment of a stand-alone minicomputer based CAD/CAM system for assisting the design and manufacture of form-rolls. The work was undertaken in collaboration with a leading manufacturer of thin-walled sections. A package of computer programs have been developed to provide computer aids for every aspect of work in form-roll design and manufacture. The programs have been successfully implemented, as an integrated CAD/CAM software system, on the ICL PERQ minicomputer with graphics facilities. Thus, the developed CAD/CAM system is a single-user workstation, with software facilities to help the user to perform the conventional roll design activities including the design of the finished section, the flower pattern, and the form-rolls. A roll editor program can then be used to modify, if required, the computer generated roll profiles. As far as manufacturing is concerned, a special-purpose roll machining program and postprocessor can be used in conjunction to generate the NC control part-programs for the production of form-rolls by NC turning. Graphics facilities have been incorporated into the CAD/CAM software programs to display drawings interactively on the computer screen throughout all stages of execution of the CAD/CAM software. It has been found that computerisation can shorten the lead time in all activities dealing with the design and manufacture of form-rolls, and small or medium size manufacturing companies can gain benefits from the CAD/CM! technology by developing, according to its own specification, a tailor-made CAD/CAM software system on a low cost minicomputer.

A tale of two analyses: the use of archived qualitative data

This article provides a unique contribution to the debates about archived qualitative data by drawing on two uses of the same data - British Migrants in Spain: the Extent and Nature of Social Integration, 2003-2005 - by Jones (2009) and Oliver and O'Reilly (2010), both of which utilise Bourdieu's concepts analytically and produce broadly similar findings. We argue that whilst the insights and experiences of those researchers directly involved in data collection are important resources for developing contextual knowledge used in data analysis, other kinds of critical distance can also facilitate credible data use. We therefore challenge the assumption that the idiosyncratic relationship between context, reflexivity and interpretation limits the future use of data. Moreover, regardless of the complex genealogy of the data itself, given the number of contingencies shaping the qualitative research process and thus the potential for partial or inaccurate interpretation, contextual familiarity need not be privileged over other aspects of qualitative praxis such as sustained theoretical insight, sociological imagination and methodological rigour. © Sociological Research Online, 1996-2012.

The Use of Situation Representation when Searching for Solutions in Computer Aided Design Systems

Projects solutions reuse methodology is offered for software development. The main idea consists in connection of the system objective with the situation using the entities which describe the condition of the system in the process of the objective statement. Every situation is associated with one or several design solutions, which can be used at the development. Based on this connection the situation representing language has been created, it lets to express a problem situation using a natural language describe. The similarity measure has been built to compare situations, it is based on the similarity coefficients with adding the absent part weight.

On the Feasibility of Steering Swallowable Microsystem Capsules Using Computer-Aided Magnetic Levitation

Swallowable capsule endoscopy is used for non-invasive diagnosis of some gastrointestinal (GI) organs. However, control over the position of the capsule is a major unresolved issue. This study presents a design for steering the capsule based on magnetic levitation. The levitation is stabilized with the aid of a computer-aided feedback control system and diamagnetism. Peristaltic and gravitational forces to be overcome were calculated. A levitation setup was built to analyze the feasibility of using Hall Effect sensors to locate the in- vivo capsule. CAD software Maxwell 3D (Ansoft, Pittsburgh, PA) was used to determine the dimensions of the resistive electromagnets required for levitation and the feasibility of building them was examined. Comparison based on design complexity was made between positioning the patient supinely and upright.

Identifying the configurational paths to innovation in SMEs:a fuzzy-set qualitative comparative analysis

Using fuzzy-set qualitative comparative analysis (fsQCA), this study investigates the conditions leading to a higher level of innovation. More specifically, the study explores the impact of inter-organisational knowledge transfer networks and organisations' internal capabilities on different types of innovation in Small to Medium size Enterprises (SMEs) in the high-tech sector. A survey instrument was used to collect data from a sample of UK SMEs. The findings show that although individual factors are important, there is no need for a company to perform well in all the areas. The fsQCA, which enables the examination of the impacts of different combinations of factors, reveals that there are a number of paths to achieve better incremental and radical innovation performance. Companies need to choose the one that is closest to their abilities and fits best with their resources.

Alternative service organizations: Funding environment, strategies, and patterns of adaptation

This study explored the strategies that community-based, consumer-focused advocacy, alternative service organizations (ASOs), implemented to adapt to the changes in the nonprofit funding environment (Oliver & McShane, 1979; Perlmutter, 1988a, 1994). It is not clear as to the extent to which current funding trends have influenced ASOs as little empirical research has been conducted in this area (Magnus, 2001; Marquez, 2003; Powell, 1986). ^ This study used a qualitative research design to investigate strategies implemented by these organizations to adapt to changes such as decreasing government, foundation, and corporate funding and an increasing number of nonprofit organizations. More than 20 community informants helped to identify, locate, and provide information about ASOs. Semi-structured interviews were conducted with a sample of 30 ASO executive directors from diverse organizations in Miami-bade and Broward Counties, in South Florida. ^ Data analysis was facilitated by the use of ATLAS.ti, version 5, a qualitative data analysis computer software program designed for grounded theory research. This process generated five major themes: Funding Environment; Internal Structure; Strategies for Survival; Sustainability; and Committing to the Cause, Mission, and Vision. ^ The results indicate that ASOs are struggling to survive financially by cutting programs, decreasing staff, and limiting service to consumers. They are also exploring ways to develop fundraising strategies; for example, increasing the number of proposals written for grants, focusing on fund development, and establishing for-profit ventures. Even organizations that state that they are currently financially stable are concerned about their financial vulnerability. There is little flexibility or cushioning to adjust to "funding jolts." The fear of losing current funding levels and being placed in a tenuous financial situation is a constant concern for these ASOs. ^ Further data collected from the self-administered Funding Checklist and demographic forms were coded and analyzed using Statistical Package for the Social Sciences (SPSS). Descriptive information and frequencies generated findings regarding the revenue, staff compliment, use of volunteers and fundraising consultants, and fundraising practices. The study proposes a model of funding relationships and presents implications for social work practice, and policy, along with recommendations for future research. ^

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

Content-aware compression for big textual data analysis

A substantial amount of information on the Internet is present in the form of text. The value of this semi-structured and unstructured data has been widely acknowledged, with consequent scientific and commercial exploitation. The ever-increasing data production, however, pushes data analytic platforms to their limit. This thesis proposes techniques for more efficient textual big data analysis suitable for the Hadoop analytic platform. This research explores the direct processing of compressed textual data. The focus is on developing novel compression methods with a number of desirable properties to support text-based big data analysis in distributed environments. The novel contributions of this work include the following. Firstly, a Content-aware Partial Compression (CaPC) scheme is developed. CaPC makes a distinction between informational and functional content in which only the informational content is compressed. Thus, the compressed data is made transparent to existing software libraries which often rely on functional content to work. Secondly, a context-free bit-oriented compression scheme (Approximated Huffman Compression) based on the Huffman algorithm is developed. This uses a hybrid data structure that allows pattern searching in compressed data in linear time. Thirdly, several modern compression schemes have been extended so that the compressed data can be safely split with respect to logical data records in distributed file systems. Furthermore, an innovative two layer compression architecture is used, in which each compression layer is appropriate for the corresponding stage of data processing. Peripheral libraries are developed that seamlessly link the proposed compression schemes to existing analytic platforms and computational frameworks, and also make the use of the compressed data transparent to developers. The compression schemes have been evaluated for a number of standard MapReduce analysis tasks using a collection of real-world datasets. In comparison with existing solutions, they have shown substantial improvement in performance and significant reduction in system resource requirements.

Organizing and Interpreting Unstructured Qualitative Data

In the last several years there has been an increase in the amount of qualitative research using in-depth interviews and comprehensive content analyses in sport psychology. However, no explicit method has been provided to deal with the large amount of unstructured data. This article provides common guidelines for organizing and interpreting unstructured data. Two main operations are suggested and discussed: first, coding meaningful text segments, or creating tags, and second, regrouping similar text segments,or creating categories. Furthermore, software programs for the microcomputer are presented as away to facilitate the organization and interpretation of qualitative data

Barriers to working with people affected by cancer: Preliminary qualitative data from a mixed methods exploration of practitioner perspectives in nutritional therapy

Introduction: Cancer is a leading cause of death worldwide. Nutrition may affect occurrence, recurrence and survival rates and many cancer patients and survivors seek individualized nutrition advice. Appropriately skilled nutritional therapy (NT) practitioners may be well-placed to safely provide this advice, but little is known of their perspectives on working with people affected by cancer. This mixed-methods study seeks to explore their views on training, barriers to practice, use of evidence, and other resources, to support the development of safe evidence-based practice. Preliminary data on barriers to practice are reported here. Methods: Two cohorts of NT practitioners were recruited from all UK registered NT practitioners, by an on-line anonymous survey. 84 cancer practitioners (CP) and 165 non-cancer practitioners (NCP) were recruited. Mixed quantitative and qualitative data was collected by the survey. Content analysis was used to analyze qualitative data on the use of evidence, barriers to practice and perceived needs for working with clients with cancer, for further exploration using interviews and focus groups. Preliminary results: For the NCP cohort, exploring themes of perceived barriers to working with people affected by cancer suggested that perceived complexity, risk and need for caution in this area of practice were important barriers. Insufficient specialist knowledge and skills also emerged as barriers. Some NCPs perceived opposition from medical practitioners and other mainstream healthcare professions as an obstacle to starting cancer practice. To overcome these barriers, specialist training emerged as most important. For the CP cohort, in exploring the skills they considered enabled them to undertake cancer work, specialist clinical and technical knowledge emerged strongly. Only 10% CP participants did not want more work with people affected by cancer. 10% CPs reported some NHS referrals, whereas most received clients by self-referral or from other practitioners. When considering barriers that impede their cancer practice, the dominant categories for CPs were hostility or opposition by mainstream oncology professionals, and lack of dialogue and engagement with them. To overcome these barriers, CPs desired engagement with oncology professionals and recognized specialist cancer NT training. For both NCPs and CPs, evidence resources, practice guidelines and practitioner support networks also emerged as potential enablers to cancer practice. Conclusions: This is the first detailed exploration of NT practitioners’ perceived barriers to working with people affected by cancer. Acquiring specialist skills and knowledge appears important to enable NCPs to start cancer work, and for CPs with these skills, the perceived barriers appear foremost in the relationship with mainstream cancer professionals. Further exploration of these themes, and other NT practitioner perspectives on working with people affected by cancer, is underway. This work will inform and support the development of professional practice, training and other resources.

Big Data Analysis in Social Networks : Extracting Food Preferences of Vegans from Twitter

Market research is often conducted through conventional methods such as surveys, focus groups and interviews. But the drawbacks of these methods are that they can be costly and timeconsuming. This study develops a new method, based on a combination of standard techniques like sentiment analysis and normalisation, to conduct market research in a manner that is free and quick. The method can be used in many application-areas, but this study focuses mainly on the veganism market to identify vegan food preferences in the form of a profile. Several food words are identified, along with their distribution between positive and negative sentiments in the profile. Surprisingly, non-vegan foods such as cheese, cake, milk, pizza and chicken dominate the profile, indicating that there is a significant market for vegan-suitable alternatives for such foods. Meanwhile, vegan-suitable foods such as coconut, potato, blueberries, kale and tofu also make strong appearances in the profile. Validation is performed by using the method on Volkswagen vehicle data to identify positive and negative sentiment across five car models. Some results were found to be consistent with sales figures and expert reviews, while others were inconsistent. The reliability of the method is therefore questionable, so the results should be used with caution.