Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium

Investigations on texture evolution and through-thickness texture heterogeneity during equal channel angular pressing (ECAP) of pure magnesium at 200 degrees C, 150 degrees C and room temperature (RT) was carried out by neutron, high energy synchrotron X-ray and electron back-scatter diffraction. Irrespective of the ECAP temperature, a distinctive basal (B) and pyramidal (C-2) II type of fibers forms. The texture differs in the bottom 1 mm portion, where the B-fiber is shifted similar to 55 degrees due to negative shear attributed to friction. (C) 2015 Elsevier Inc. All rights reserved.

Probing complex heterostructures using hard X-ray photoelectron spectroscopy (HAXPES)

X-ray Photoelectron Spectroscopy (XPS) plays a central role in the investigation of electronic properties as well as compositional analysis of almost every conceivable material. However, a very short inelastic mean free path (IMFP) and the limited photon flux in standard laboratory conditions render this technique very much surface sensitive. Thus, the electronic structure buried below several layers of a heterogeneous sample is not accessible with usual photoemission techniques. An obvious way to overcome this limitation is to use a considerably higher energy photon source, as this increases the IMFP of the photo-ejected electron, thereby making the technique more depth and bulk sensitive. Due to this obvious advantage, Hard X-ray Photo Electron Spectroscopy (HAXPES) is rapidly becoming an extremely powerful tool for chemical, elemental, compositional and electronic characterization of bulk systems, more so with reference to systems characterized by the presence of buried interfaces and other types of chemical heterogeneity. The relevance of such an investigative tool becomes evident when we specifically note the ever-increasing importance of heterostructures and interfaces in the context of a wide range of device applications, spanning electronic, magnetic, optical and energy applications. The interest in this nondestructive, element specific HAXPES technique has grown rapidly in the past few years; we discuss critically its extensive use in the study of depth resolved electronic properties of nanocrystals, multilayer superlattices and buried interfaces, revealing their internal structures. We specifically present a comparative discussion, with examples, on two most commonly used methods to determine internal structures of heterostructured systems using XPS. (C) 2015 Elsevier B.V. All rights reserved.

Nanoparticle induced miscibility in LCST polymer blends: critically assessing the enthalpic and entropic effects

The use of copolymer and polymer blends widened the possibility of creating materials with multilayered architectures. Hierarchical polymer systems with a wide array of micro and nanostructures are generated by thermally induced phase separation (TIPS) in partially miscible polymer blends. Various parameters like the interaction between the polymers, concentration, solvent/non-solvent ratio, and quenching temperature have to be optimized to obtain these micro/nanophase structures. Alternatively, the addition of nanoparticles is another strategy to design materials with desired hetero-phase structures. The dynamics of the polymer nanocomposite depends on the statistical ordering of polymers around the nanoparticle, which is dependent on the shape of the nanoparticle. The entropic loss due to deformation of polymer chains, like the repulsive interactions due to coiling and the attractive interactions in the case of swelling has been highlighted in this perspective article. The dissipative particle dynamics has been discussed and is correlated with the molecular dynamics simulation in the case of polymer blends. The Cahn Hillard Cook model on variedly shaped immobile fillers has shown difference in the propagation of the composition wave. The nanoparticle shape has a contributing effect on the polymer particle interaction, which can change the miscibility window in the case of these phase separating polymer blends. Quantitative information on the effect of spherical particles on the demixing temperature is well established and further modified to explain the percolation of rod shaped particles in the polymer blends. These models correlate well with the experimental observations in context to the dynamics induced by the nanoparticle in the demixing behavior of the polymer blend. The miscibility of the LCST polymer blend depends on the enthalpic factors like the specific interaction between the components, and the solubility product and the entropic losses occurring due to the formation of any favorable interactions. Hence, it is essential to assess the entropic and enthalpic interactions induced by the nanoparticles independently. The addition of nanoparticles creates heterogeneity in the polymer phase it is localized. This can be observed as an alteration in the relaxation behavior of the polymer. This changes the demixing behavior and the interaction parameter between the polymers. The compositional changes induced due to the incorporation of nanoparticles are also attributed as a reason for the altered demixing temperature. The particle shape anisotropy causes a direction dependent depletion, which changes the phase behavior of the blend. The polymer-grafted nanoparticles with varying grafting density show tremendous variation in the miscibility of the blend. The stretching of the polymer chains grafted on the nanoparticles causes an entropy penalty in the polymer blend. A comparative study on the different shaped particles is not available up to date for understanding these aspects. Hence, we have juxtaposed the various computational studies on nanoparticle dynamics, the shape effect of NPs on homopolymers and also the cases of various polymer blends without nanoparticles to sketch a complete picture on the effect of various particles on the miscibility of LCST blends.

Effects of Microstructural Heterogeneity on the Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Coupling effects of heterogeneity and stress fluctuation on rupture

The coupling of mesoscopic strength distribution and stress fluctuation on damage evolution and rupture are examined. The numerical simulations show that there is only weak stress fluctuation at the initial damage stage when the mean field approximation is in effect. As the damage fraction becomes larger than the threshold value, the fluctuation is amplified significantly, and damage localization appears. The coupling between stress fluctuation, disordered heterogeneity and the damage localization may play an essential role in catastrophic rupture. (C) 2003 Elsevier Ltd. All rights reserved.

Prosocial norms and degree heterogeneity in social networks

We provide empirical evidence to support the claims that social diversity promotes prosocial behavior. We elicit a real-life social network and its members’ adherence to a social norm, namely inequity aversion. The data reveal a positive relationship between subjects’ prosociality and several measures of centrality. This result is in line with the theoretical literature that relates the evolution of social norms to the structure of social interactions and argues that central individuals are crucial for the emergence of prosocial behavior.

Effects of Microstructural Heterogeneity on The Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Intersexual and spatial heterogeneity in trophic attributes of the sleeper, Bostrychus africanus (Eleotridae) in the Qua Iboe Estuary, Nigeria

There was variation in the ingestion of the food objects by the sexes. Despite the similarity in rank-order of the food objects, the ingestion of the objects vary significantly (rg=0.320, P>0.05). Dipterans adult and Hymenoptera were the only food objects not eaten by the males whereas insect remains and unidentified bivalves were absent from the trophics spectrum of the females. There was significant increase in feeding intensity by females than males. There was significant increase in GRI by specimens from Nipa Creek whereas individuals from mangrove creek recorded higher MGF and vice-versa. Dipterans adult. Hymenoptera, insect remains, Neritina glabrata and unid bivalves were absent from dietaries for nipa creek whereas a complete array of the food objects were eaten in the mangrove creek. The present findings highlights the importance of the mangrove ecosystem as the native vegetation encompassing great diversity of food resources and living conditions than the succeeding alien nipa vegetation

Snail heterogeneity in clear cell renal cell carcinoma

Background: Intratumor heterogeneity may be responsible of the unpredictable aggressive clinical behavior that some clear cell renal cell carcinomas display. This clinical uncertainty may be caused by insufficient sampling, leaving out of histological analysis foci of high grade tumor areas. Although molecular approaches are providing important information on renal intratumor heterogeneity, a focus on this topic from the practicing pathologist' perspective is still pending. Methods: Four distant tumor areas of 40 organ-confined clear cell renal cell carcinomas were selected for histopathological and immunohistochemical evaluation. Tumor size, cell type (clear/granular), Fuhrman's grade, Staging, as well as immunostaining with Snail, ZEB1, Twist, Vimentin, E-cadherin, beta-catenin, PTEN, p-Akt, p110 alpha, and SETD2, were analyzed for intratumor heterogeneity using a classification and regression tree algorithm. Results: Cell type and Fuhrman's grade were heterogeneous in 12.5 and 60 % of the tumors, respectively. If cell type was homogeneous (clear cell) then the tumors were low-grade in 88.57 % of cases. Immunostaining heterogeneity was significant in the series and oscillated between 15 % for p110a and 80 % for Snail. When Snail immunostaining was homogeneous the tumor was histologically homogeneous in 100 % of cases. If Snail was heterogeneous, the tumor was heterogeneous in 75 % of the cases. Average tumor diameter was 4.3 cm. Tumors larger than 3.7 cm were heterogeneous for Vimentin immunostaining in 72.5 % of cases. Tumors displaying negative immunostaining for both ZEB1 and Twist were low grade in 100 % of the cases. Conclusions: Intratumor heterogeneity is a common event in clear cell renal cell carcinoma, which can be monitored by immunohistochemistry in routine practice. Snail seems to be particularly useful in the identification of intratumor heterogeneity. The suitability of current sampling protocols in renal cancer is discussed.