Gestió de pressupostos per a la construcció

En els últims anys el sector de la construcció ha experimentat un creixement exponencial. Aquest creixement ha repercutit sobre molts aspectes: des de la necessitat de tenir més personal a les obres, la implantació d’unes oficines per a poder gestionar la compatibilitat i portar un control sobre les obres fins a la necessitat d’haver de disposar de programes informàtics específics que ajudin a realitzar la feina de la manera més còmode i àgil possible. El projecte que s’ha dut a terme consisteix a cobrir una d’aquestes necessitats, que és la de la gestió dels pressupostos en les diferents obres que els constructors realitzen. Utilitza la base de dades de l’ITEC (institut de Tecnologia de la Construcció de Catalunya) sobre la qual treballen la immensa majoria dels arquitectes quan dissenyen les obres, però també permet entrar les pròpies dades que el constructor vulgui. L’usuari de l’aplicació podrà fer pressupostos per obres de nova construcció, reformes ... agrupant cada una d’elles per capítols. Aquests capítols els podem entendre com les diferents fases a dur a terme, per exemple: la construcció dels fonaments, l’aixecament de les parets o fer la teulada. Dins dels capítols hi trobem les partides, que és un conjunt de materials i hores de feina i maquinària per a dur a terme una part de l’obra, com per exemple seria fer un envà de separació entre habitacions. En aquest cas hi tindríem els diferents materials que necessitaríem, totxanes, morter; les hores de manobre necessàries per aixecar-la, el transport de tot el material fins a l’obra... Tots aquests paràmetres (materials, hores, transport...) s’anomenen articles i van inclosos a dins de les partides. Aquesta aplicació està dissenyada per funcionar en un entorn client/servidor, utilitzant com a servidor un Linux OpenSuse 10.2 i com a clients estacions de treball amb Windows XP, tot i que també podríem utilitzar d’altres versions dels sistemes operatius de Microsoft. L’entorn de desenvolupament utilitzat és el del llenguatge FDS , el qual ja porta integrat un gestor de fitxers que és el que es farà servir.

Von der Hol- zur Bring-Bibliothek

Ausgehend von langfristigen Veränderungen im wissenschaftlichen Publikationswesen und in der Informationsvermittlung werden die Bedingungen und möglichen Folgen dieser Entwicklung beleuchtet. Je nach Standpunkt haben Bibliothekare, Verleger oder Wissenschaftsautoren unterschiedliche Wahrnehmungen von dem, was eine (digitale) Bibliothek ausmacht. Bespielhaft wird die Funtionalität des hessischen Digibib-Projektes beschrieben, in dem Standard Such- und Retrieval-Protokolle (Z39.50, HTTP) für den Anschluß von OPAC und Client-Server-Datenbanken mit Volltextsammlungen sorgen.

Entwurf und Betrieb von Regelungs- und Monitoringsystemen für dezentrale Energiesysteme auf der Basis von verteilten Embedded Systems

Nach einem einleitenden ersten Kapitel wird im zweiten Kapitel der Stand der Technik für Regelungs- und Monitoringsysteme mit vernetzten Systemen dargestellt. Daraus wird die Motivation zur Entwicklung neuer, kostengünstiger Systeme abgeleitet. Im dritten Kapitel folgt eine Darstellung der verschiedenen Arten marktverfügbarer Embedded Systems und dafür geeigneter Betriebs­systeme. Anforderungen an verteilte Regelungssysteme, unterschiedliche Strukturen dieser Systeme und deren Vor- und Nachteile sind Gegenstand des vierten Kapitels. Anhand von Beispielen aus den Bereichen Erzeugungsmanagement für den Betrieb von KWK-Anlagen, Energieverbrauchsmonitoring und Smart-Metering wird der Einsatz von verteilten Regelungs- und Monitoringsystemen im fünften Kapitel dargestellt. Im folgenden sechsten Kapitel wird die Bedeutung normierter Kommunikation für den Einsatz in verteilten Systemen sowie dafür vorhandene Standards aus der elektrischen Energieversorgungstechnik und der Automatisierungstechnik behandelt. Der Stand der Internet-Technik für verteilte Systeme ist Gegenstand des siebten Kapitels. Dabei werden zunächst die verschiedenen drahtlosen und drahtgebundenen Kommunikationsmedien vorgestellt und ihre Eigenschaften und die Rand­bedingungen für ihren Einsatz erörtert. Ebenso werden technische Probleme beim Einsatz der Internet-Technik aufgezeigt und Lösungsmöglichkeiten für diese Probleme dargestellt. Es folgt eine Übersicht von Netzwerkdiensten, die für den Betrieb von verteilten Systemen notwendig sind. Außerdem werden Techniken zur Überwachung von verteilten Systemen behandelt. Kapitel acht zeigt Sicherheitsrisiken bei der Nutzung des Internets auf und bewertet verschiedene Techniken zur Absicherung des Netzwerkverkehrs. Kapitel neun stellt ein Internet-basiertes Client-Server-System zur Online-Visualisierung von Anlagendaten im Webbrowser mit Hilfe von Java-Applets und XML-RPC vor. Die Visualisierung von Anlagendaten auf Mobiltelefonen mit Hilfe des Wireless Application Protocol sowie die dafür notwendige Software und Infrastruktur ist Gegenstand des zehnten Kapitels. Im elften Kapitel wird eine neuartige Software für die Simulation von dezentralen Energiesystemen und deren Regelungs­systemen auf Basis von virtuellen Maschinen, virtuellen Netzwerken und einer thermischen Simulationsumgebung vorgestellt sowie deren Anwendung für die Reglerentwicklung erklärt. Verschiedene Techniken für die Installation von Betriebssystemen und Software für die Embedded Systems eines verteilten Systems werden im Kapitel zwölf untersucht. Im Kapitel 13 werden verschiedene Technologien zur Konfiguration und Parametrierung von Regelungssystemen in der industriellen Prozess- und Fertigungs­automatisierung hinsichtlich ihrer Eignung für dezentrale Energiesysteme analysiert. Anschließend wird eine Software zur Installation und Parametrierung von Monitoringsystemen sowie der dazugehörigen Infrastruktur vorgestellt. Kapitel 14 beschäftigt sich mit Anforderungen an die Hardware für verteilte Systeme und mit Maßnahmen zur Erhöhung der Betriebs- und der Datensicherheit. Im 15. Kapitel werden die in den bisherigen Kapiteln vorgestellten Techniken anhand eines großen verteilten Monitoringsystems und anhand eines Power Flow and Power Quality Management Systems auf Basis von verteilten Embedded Systems evaluiert. Kapitel 16 fasst die Ergebnisse der Arbeit zusammen und enthält einen Ausblick auf zukünftige Entwicklungen.

The Audiomomma Music Recommendation System

We design and implement a system that recommends musicians to listeners. The basic idea is to keep track of what artists a user listens to, to find other users with similar tastes, and to recommend other artists that these similar listeners enjoy. The system utilizes a client-server architecture, a web-based interface, and an SQL database to store and process information. We describe Audiomomma-0.3, a proof-of-concept implementation of the above ideas.

JQuery, JSON & AJAX

The traditional web model requires each user interaction to trigger an HTTP client-server interaction that creates a new browser page. AJAX and other techniques allow the Web developer to interact with the server without the expense of recreating a new DOM.

A peer-to-peer approach to content dissemination and search in collaborative networks

There are three key driving forces behind the development of Internet Content Management Systems (CMS) - a desire to manage the explosion of content, a desire to provide structure and meaning to content in order to make it accessible, and a desire to work collaboratively to manipulate content in some meaningful way. Yet the traditional CMS has been unable to meet the latter of these requirements, often failing to provide sufficient tools for collaboration in a distributed context. Peer-to-Peer (P2P) systems are networks in which every node is an equal participant (whether transmitting data, exchanging content, or invoking services) and there is an absence of any centralised administrative or coordinating authorities. P2P systems are inherently more scalable than equivalent client-server implementations as they tend to use resources at the edge of the network much more effectively. This paper details the rationale and design of a P2P middleware for collaborative content management.

Paged similarity queries

An important feature of a database management systems (DBMS) is its client/server architecture, where managing shared memory among the clients and the server is always an tough issue. However, similarity queries are specially sensitive to this kind of architecture, since the answer sizes vary widely. Usually, the answers of similarity query are fully processed to be sent in full to the user, who often is interested in just parts of the answer, e.g. just few elements closer or farther to the query reference. Compelling the DBMS to retrieve the full answer, further ignoring its majority is at least a waste of server processing power. Paging the answer is a technique that splits the answer onto several pages, following client requests. Despite the success of paging on traditional queries, little work has been done to support it in similarity queries. In this work, we present a technique that not only provides paging in similarity range or k-nearest neighbor queries, but also supports them in two variations: the forward similarity query and the backward similarity query. They return elements either increasingly farther of increasingly closer to the query reference. The reported experiments show that, depending on the proportion of the interesting part over the full answer, both techniques allow answering queries much faster than it is obtained in the non-paged way. (C) 2010 Elsevier Inc. All rights reserved.

Open and Standardized Resources for Smart Transducer Networking

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uma arquitetura de referência para o desenvolvimento de sistemas interativos multiplataformas

It is increasingly common use of a single computer system using different devices - personal computers, telephones cellular and others - and software platforms - systems graphical user interfaces, Web and other systems. Depending on the technologies involved, different software architectures may be employed. For example, in Web systems, it utilizes architecture client-server - usually extended in three layers. In systems with graphical interfaces, it is common architecture with the style MVC. The use of architectures with different styles hinders the interoperability of systems with multiple platforms. Another aggravating is that often the user interface in each of the devices have structure, appearance and behaviour different on each device, which leads to a low usability. Finally, the user interfaces specific to each of the devices involved, with distinct features and technologies is a job that needs to be done individually and not allow scalability. This study sought to address some of these problems by presenting a reference architecture platform-independent and that allows the user interface can be built from an abstract specification described in the language in the specification of the user interface, the MML. This solution is designed to offer greater interoperability between different platforms, greater consistency between the user interfaces and greater flexibility and scalability for the incorporation of new devices

Tvoice :um sistema de manipulação de linguagens para auxiliar portadores de necessidades especiais através da web

This work presents the tVoice, software that manipulates tags languages, extracting information and, being integral part of the VoiceProxy system, it aids bearers of special needs in the access to the Web. This system is responsible for the search and treatment of the documents in the Web, extracting the textual information contained in those documents and preceding the capability of generating eventually through translation techniques, an audio script, used by the of interface subsystem of VoiceProxy, the iVoice, in the process of voice synthesis. In this stage the tVoice, besides the treatment of the tag language HTML, processes other two formats of documents, PDF and XHTML. Additionally to allow that, besides the iVoice, other interface subsystems can make use of the tVoice through remote access, we propose distribution systems techniques based in the model Client-Server providers operations of the fashion of a proxy server treatment of documents

Open and standardized tools for smart transducer networking

IEEE 1451 Standard is intended to address the smart transducer interfacing problematic in network environments. Usually, proprietary hardware and software is a very efficient solution to in planent the IEEE 1451 normative, although can be expensive and inflexible. In contrast, the use of open and standardized tools for implementing the IEEE 1451 normative is proposed in this paper. Tools such as Java and Phyton programming languages, Linux, programmable logic technology, Personal Computer resources and Ethernet architecture were integrated in order to constructa network node based on the IEEE 1451 standards. The node can be applied in systems based on the client-server communication model The evaluation of the employed tools and expermental results are presented. © 2005 IEEE.

A medical information system to manage a cancer database

Cancer is the second main cause of death in Brazil, and according to statistics disclosed by INCA - National Cancer Institute 466,730 new cases of the disease are forecast for 2008. The storage and analysis of tumour tissues of various types and patients' clinical data, genetic profiles, characteristics of diseases and epidemiological data may provide more precise diagnoses, providing more effective treatments with higher chances for the cure of cancer. In this paper we present a Web system with a client-server architecture, which manages a relational database containing all information relating to the tumour tissue and their location in freezers, patients, medical forms, physicians, users, and others. Furthermore, it is also discussed the software engineering used to developing the system.

Firewall Dinâmico: uma implementação cliente/servidor

Pós-graduação em Ciência da Computação - IBILCE

Desenvolvimento de Pipelines para análise de EST, bibliotecas ITS e 16S para estudos genômicos em formigas Attini

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelagem numérica de dados MCSEM 3D usando computação paralela

Desenvolvemos a modelagem numérica de dados sintéticos Marine Controlled Source Electromagnetic (MCSEM) usada na exploração de hidrocarbonetos para simples modelos tridimensionais usando computação paralela. Os modelos são constituidos de duas camadas estrati cadas: o mar e o sedimentos encaixantes de um delgado reservatório tridimensional, sobrepostas pelo semi-espaço correspondente ao ar. Neste Trabalho apresentamos uma abordagem tridimensional da técnica dos elementos nitos aplicada ao método MCSEM, usando a formulação da decomposição primária e secundária dos potenciais acoplados magnético e elétrico. Num pós-processamento, os campos eletromagnéticos são calculados a partir dos potenciais espalhados via diferenciação numérica. Exploramos o paralelismo dos dados MCSEM 3D em um levantamento multitransmissor, em que para cada posição do transmissor temos o mesmo processo de cálculos com dados diferentes. Para isso, usamos a biblioteca Message Passing Interface (MPI) e o modelo servidor cliente, onde o processador administrador envia os dados de entradas para os processadores clientes computar a modelagem. Os dados de entrada são formados pelos parâmetros da malha de elementos nitos, dos transmissores e do modelo geoelétrico do reservatório. Esse possui geometria prismática que representa lentes de reservatórios de hidrocarbonetos em águas profundas. Observamos que quando a largura e o comprimento horizontais desses reservatório têm a mesma ordem de grandeza, as resposta in-line são muito semelhantes e conseqüentemente o efeito tridimensional não é detectado. Por sua vez, quando a diferença nos tamanhos da largura e do comprimento do reservatório é signi cativa o efeito 3D é facilmente detectado em medidas in-line na maior dimensão horizontal do reservatório. Para medidas na menor dimensão esse efeito não é detectável, pois, nesse caso o modelo 3D se aproxima de um modelo bidimensional. O paralelismo dos dados é de rápida implementação e processamento. O tempo de execução para a modelagem multitransmissor em ambiente paralelo é equivalente ao tempo de processamento da modelagem para um único transmissor em uma máquina seqüêncial, com o acréscimo do tempo de latência na transmissão de dados entre os nós do cluster, o que justi ca o uso desta metodologia na modelagem e interpretação de dados MCSEM. Devido a reduzida memória (2 Gbytes) em cada processador do cluster do departamento de geofísica da UFPA, apenas modelos muito simples foram executados.