Molhabilidade de material reembasador: efeito dos agentes químicos de limpeza

Risk of mechanical injuries contraindicate brushing and elect chemical agents as appropriate for daily cleaning of dentures relined with resilient materials. It was evaluated the effect of denture cleansers on the wettability of denture relining material (Dentusoft, Dental Medrano). We used 20 discs of acrylic resin thermoactivated VipiCril ® with 30mm diameter and 4mm thick, covered by 2mm Dentusoft ®. Divided into 4grupos were stored in artificial saliva at 37 +1 º C for 30 days, immersed daily for 15minutes in distilled water (GI), Corega ® Tabs (GII), a solution of sodium bicarbonate (GIII) or solution of sodium hypochlorite (GIV) after which, on the soft liner were poured 2 ml of type IV gypsum (Durone IV, Dentsply). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to analysis, showed non-normal distribution, opting for non-parametric test. Kruskal Wallis test performed at 5% significance, there was statistical difference between the groups with lower average contact angle for GII. It was concluded that the chemical cleaning Corega Tabs ® allowed a better adaptation of relining the gypsum studied.

Tecnologia para produção de extrato aquoso de amendoim

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geoquímica de perfis lateríticos na chapada sedimentar do Triângulo Mineiro

The ferruginous sandstone (Serra da Galga member) from Marilia formation present in sedimentary mining triangle plateaus - MG (southeast Brazil) is still not properly characterized, as well as the presence of a rich layer Fe nodules which is not properly understood, as are the alteration products of this material that may be linked to the presence of refractory clays which are characterized by intimate relationship between Fe and Al. Aluminum is widely present on top of these plateaus. This course conclusion paper characterized the mineralogy and distribution of smaller elements both rust sandstone evolved as soil above this sandstone. The characterization has been done by using X-ray fluorescence techniques (XRF), the iron was removed by using the CBD method (dithionito-citratebicarbonate), and X-ray diffraction (XRD) and analysis of the products extracted by the CBD method by ICP- OES were made to characterize the material. The results of the XRF show great variation of Al and Si, Fe with almost constant behavior in the average depth of 110 cm, where it has the highest concentration levels. Fe appear associated with the V and Ce. CDB results show a clear relation of Fe with Al. Al does not have in this case compared with Cr or any other item. The concentration of extracted Al was always below the concentration of Fe. In the region, the formation of this Latosols- Gleysols system is subject to topography and its influence on local water regime, a regime that has direct influence on the formation of supergene accumulations as in the area and results in aluminum accumulation in refractory clays exploited by IBAR mining

Acidose láctica ruminal aguda induzida experimentalmente em ovinos: estudo clínico e laboratorial

Pós-graduação em Medicina Veterinária - FCAV

Fibra, metabolismo ácido-básico e balanço de macroelementos em gatos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Oxidación de Cu(I) en agua de mar

La cinética de oxidación de Cu(I) con oxígeno, a concentración nanomolar, se ha estudiado en función de la concentración de cobre (I), pH, concentración de bicarbonato y de la temperatura, al objeto de obtener las ecuaciones de dependencia de la constante de velocidad con cada variable, en NaCl (0.7M) con bicarbonato (2mM) y en agua de mar. Los estudios a escala nanomolar se han comparado con los estudios realizados por otros autores a escala micromolar. El tiempo de vida medio a nivel nanomolar es superior en ambos medios, lo que justifica la presencia de concentraciones medibles de Cu(I) en aguas superficiales. La constante de velocidad de segundo orden (k) es independiente de la concentración de Cu(I), en el rango de 20 a 200 nM, con lo que los resultados permiten una visión más realista de lo que ocurre en el océano. En los estudios del efecto del pH en la cinética de oxidación se obtienen rectas próximas para disolución de NaCl (0.7M) con bicarbonato (2mM) y en agua de mar, por lo que las interacciones específicas pueden despreciarse o quedar compensadas entre sí. La ecuación obtenida para cada caso es: Logk(NaCl) = −2.453(±0.341) + 0.611(±0.044)pH (para NaCl) Logk(sw) = −1.484(±0.266) + 0.489(±0.034) pH (para agua de mar) La concentración de bicarbonato produce un aumento en la constante de segundo orden (k) hasta 5mM, comportándose de acuerdo con la ecuación siguiente: [ ] [ ]2 3 2 3 3 2 2 ( ) 1.54 10 ( 3.518 10 ) 3.963( 58.17 10 ) 0.212( 3.242 10 ) 3 NaHCO Logk NaHCO NaHCO − − − ⋅ ± ⋅ = − ± ⋅ + ± ⋅ − El aumento de la temperatura produce un aumento en la constante de velocidad relacionándose este efecto con la entalpía y entropía de activación del proceso. Oxidación de Cu(I) en agua de mar 8 El trabajo realizado supone un mejor conocimiento de los procesos que controlan la cinética de oxidación del Cu(I) en medios naturales y servirán de base para futuros experimentos.

Eliminación de microcontaminantes orgánicos mediante tratamientos avanzados para un uso potable indirecto de aguas regeneradas

[ES]En este trabajo se ha evaluado la utilización de procesos avanzados en la obtención de agua regenerada para un uso potable indirecto. Se ha investigado la eficacia de procesos de oxidación avanzada (UV/H2O2) y (UV/TiO2), así como de adsorción sobre carbón activado, en la eliminación de 23 fármacos presentes habitualmente en aguas tratadas por tratamientos convencionales en EDAR urbanas, en concentraciones del orden de ng/L. El tratamiento con UVC y H2O2 resultó ser más eficiente que la fotocatálisis con TiO 2, ya que elimina el 100% de los fármacos estudiados. La presencia de materia orgánica y bicarbonato en agua microfiltrada procedente de un tratamient o de lodos activados, limitan la aplicación de la fotocatálisis heterogénea debido al envenenamiento de la superficie del catalizador así como a una competencia de los componentes del agua y los contaminantes en las reacciones con las especies oxidantes generada.

Chemistry of Fe(II) in the presence of organic exudates from phytoplankton and of copper in seawater

Programa de doctorado de Oceanografía ; 2006-2008

Evoluzione della qualita delle carni avicole durante la conservazione refrigerata

Il presente lavoro di tesi ha avuto lo scopo di valutare l’influenza della marinatura su alcuni aspetti microbiologici e chimico-fisici correlati alla qualità della carne di petto di pollo confezionata sottovuoto durante un periodo di stoccaggio di 14 giorni in condizioni refrigerate. Dalle analisi microbiologiche, è emerso che, nonostante l’aumento di pH dovuto all’azione alcalinizzante del bicarbonato, la shelf-life del prodotto marinato è rimasta invariata rispetto al gruppo di controllo non-marinato ed è stata pari a circa 14 giorni. Dal punto di vista tecnologico, gli ingredienti funzionali aggiunti nella soluzione di marinatura hanno consentito di ottenere livelli di perdite di cottura nel prodotto finito simili a quelli delle carni non-marinate durante tutto il periodo di conservazione. Ciò è riconducibile al notevole aumento della solubilità delle proteine miofibrillari determinato dall’effetto sinergico di cloruro di sodio e bicarbonato. Tuttavia, i prodotti marinati hanno mostrato maggiori perdite di liquido nelle confezioni e questo aspetto può condizionare negativamente la propensione all’acquisto da parte del consumatore. Gli effetti rilevati sul colore non costituiscono invece un elemento determinante nella scelta dei prodotti avicoli confezionati sottovuoto. Infine, è stato escluso qualsiasi effetto negativo della marinatura nei confronti della stabilità ossidativa dei lipidi. I risultati ottenuti in questo lavoro di tesi hanno pertanto dimostrato che è possibile realizzare un prodotto marinato a base di carne di petto di pollo stabile durante la conservazione offrendo così al consumatore un alimento con caratteristiche sensoriali di succulenza e tenerezza superiori e con una maggiore facilità d’uso. Restano da ottimizzare alcuni aspetti legati alla presentazione del prodotto soprattutto in relazione alla presenza di liquido nelle confezioni.

Analisi ed ottimizzazione di sistemi multistadio di trattamento fumi: applicazione ad un termovalorizzatore di rifiuti urbani e speciali

Questo studio è mirato ad analizzare ed ottimizzare il consumo dei reagenti solidi impiegati da uno stabilimento di termovalorizzazione di rifiuti solidi urbani e speciali (Silea S.p.A, presso Valmadrera (LC)), per abbattere le correnti acide trattate nelle due linee fumi multistadio. Dopo aver scelto quale delle due linee prendere come riferimento, per poi riportare i risultati ottenuti anche sull’altra con opportune correzioni, il lavoro è stato condotto in diverse fasi, e affiancato da un costante confronto diretto con gli ingegneri e i tecnici dello stabilimento. Una volta preso atto delle normali condizioni di funzionamento dell’impianto, si è proceduto all’esecuzione di test, mirati a quantificare l’efficienza di rimozione dell’acido cloridrico, da parte del bicarbonato di sodio e dell’innovativo sorbente dolomitico, brevettato sotto il nome: Depurcal® MG. I test sono stati suddivisi in giornate differenti in base al tipo di reattivo da analizzare (e quindi lo stadio) e programmati in modo che permettessero di correlare la conversione dell’HCl alla portata di reagente solido introdotto. Una volta raccolti i dati, essi sono stati elaborati e filtrati in base a criteri oggettivi, per poi essere analizzati con senso critico, fornendo un quadro completo sulla reale potenzialità dell’impianto. Attraverso l’utilizzo di un opportuno modello è stato possibile caratterizzarlo e individuare la migliore condizione economico-operativa per ognuno dei possibili scenari individuati.

Cetoacidosis normoglucémica en una embarazada

La cetoacidosis normoglucémica se define como un cuadro de cetoacidosis diabética, con niveles de bicarbonato menores a 10 mEq/l, cetonemia o cetonuria y niveles de glucosa inferiores a 200 mg/dl. Representa hasta el 30% de las formas de presentación de cetoacidosis diabética. Se comunica un caso de cetoacidosis normoglucémica en una embarazada con el objeto de destacar esta inusual asociación y forma de presentación y realizar comentarios respecto a su fisiopatología y tratamiento. Los factores que predisponen a esta condición son los vómitos excesivos, la persistencia del uso de la insulina, una inadecuada ingesta de carbohidratos y el embarazo en algunos casos. El déficit relativo de insulina, la glucogenólisis acelerada con depleción de los depósitos hepáticos de glucosa y la acción del glucagón y hormonas contrainsulares sobre la gluconeogénesis y la lipólisis, son los principales mecanismos responsables del desarrollo de la cetoacidosis euglucémica. El manejo de esta condición es diferente por la necesidad de aporte de volumen con dextrosa al 5-10% en agua y elevado requerimiento de insulina para corregir la cetogénesis y la acidosis. Es importante conocer que aún con glucemias normales puede existir cetoacidosis en pacientes con las condiciones predisponentes mencionadas.

Sesquióxidos de hierro en bosques templado húmedos del estado de Hidalgo, México

Se estudian las formas de hierro extraídas con oxalato ácido de amonio, pirofosfato de sodio, ditionito-citrato-bicarbonato, así como el hierro total en disolución en suelos Alisoles en el municipio de Acaxochitlán, Hidalgo, México. Los suelos estudiados soportan distintos tipos de vegetación forestal: Pinus patula Schlecht and Cham (Pp), Pinus teocote, (Pt) y Quercus spp, (Q). El objetivo del trabajo fue determinar si la vegetación influye significativamente sobre las diferentes fracciones de hierro (Fe) en el suelo. Los contenidos de Fe total son significativamente mayores en suelos bajo vegetación de Pp (14,5% de Fe2O3), el mayor porcentaje de ferrihidrita (38,0% del Fe total en suelo) y de complejos organominerales de Fe y óxidos amorfos de Fe (20,9% y 16,3% respectivamente del Fe total en suelo, se dio en el bosque de Pt. En los suelos bajo bosques de Pp predominaron formas de Fe lábil (56,7% del Fe total en suelo) y formas cristalinas de Fe (goetita/hematita). La vegetación de Q mostró mayor alteración de los suelos y en el caso de Pt y Pp se presentó una mayor evolución en el proceso de organización estructural de los oxihidróxidos de Fe. El tipo de vegetación forestal influye en el grado de evolución del suelo, y en la distribución, contenido y formas de óxidos de Fe. En un orden de mayor a menor el contenido de Fe total en el suelo fue Pinus patula > Quercus spp > Pinus teocote.

Desarrollo de conglomerados con la incorporación de cenizas volantes procedentes de la incineración de residuos sólidos urbanos

Esta tesis presenta los resultados de la investigación realizada sobre la inertización de cenizas volantes procedentes de residuos sólidos urbanos y su posterior encapsulación en distintas matrices de mortero. Durante el proceso de inertización, se ha logrado la inertización de éste residuo tóxico y peligroso (RTP) y también su valorización como subproducto. De esta forma se dispone de nueva “materia prima” a bajo coste y la eliminación de un residuo tóxico y peligroso con la consiguiente conservación de recursos naturales alternativos. La caracterización química de las cenizas analizadas refleja que éstas presentan altas concentraciones de cloruros, Zn y Pb. Durante la investigación se ha desarrollado un proceso de inertización de las cenizas volantes con bicarbonato sódico (NaHCO3) que reduce en un 99% el contenido en cloruros y mantiene el pH en valores óptimos para que la concentración de los metales pesados en el lixiviado sea mínima debido a su estabilización en forma de carbonatos insolubles. Se han elaborado morteros con cuatro tipos distintos de cementos (CEM-I, CEM-II, CAC y CSA) incorporando cenizas volantes inertizadas en una proporción igual a un 10% en peso del árido utilizado. Los morteros ensayados abarcan distintas dosificaciones tanto en la utilización de áridos con distintos diámetros (0/2 y 0/4), como en la relación cemento/árido (1/1 y 1/3). Se han obtenido las propiedades físicas y mecánicas de estos morteros mediante ensayos de Trabajabilidad, Estabilidad Dimensional, Carbonatación, Porosidad y Resistencias Mecánicas. De igual forma, se presentan resultados de ensayos de lixiviación de Zn, Pb, Cu y Cd, sobre probetas monolíticas de los morteros con los mejores comportamientos físico/mecánicos, donde se ha analizado el contenido en iones de dichos metales pesados lixiviados mediante determinación voltamperométrica de redisolución anódica Se concluye que todos los morteros ensayados son técnicamente aceptables, siendo los más favorables los elaborados con Cemento de Sulfoaluminato de Calcio (CSA) y con Cemento de Aluminato de Calcio (CAC). En este último caso, se mejoran las resistencias a compresión de los morteros de referencia en más de un 48%, y las resistencias a flexión en más de un 67%. De igual forma, los ensayos de lixiviado revelan la completa encapsulación de los iones de Zn y la mitigación en el lixiviado de los iones de Pb. Ambos morteros podrían ser perfectamente validos en actuaciones en las que se necesitase un producto de fraguado rápido, altas resistencias iniciales y compensación de las retracciones con una elevada estabilidad dimensional. En base a esto, el material podría ser utilizado como mortero de reparación en viales y pavimentos que requiriesen altas prestaciones, tales como: soleras industriales, pistas de aterrizaje, aparcamientos, etc. O bien, para la confección de elementos prefabricados sin armaduras estructurales, dada su elevada resistencia a flexión. ABSTRACT This dissertation presents the results of a research on inerting fly ash from urban solid waste and its subsequent encapsulation in mortar matrixes. The inerting of this hazardous toxic waste, as well as its valorization as a by-product has been achieved. In this way, a new "raw material" is available through a simple process and the toxic and hazardous waste is eliminated, and consequently, conservation of alternative natural resources is strengthened. Chemical analysis of the ashes analyzed shows high concentrations of soluble chlorides, Zn and Pb. An inerting process of fly ash with sodium bicarbonate (NaHCO3) has been developed which reduces 99% the content of chlorides and maintains pH at optimal values, so that the concentration of heavy metals in the leachate is minimum, due to its stabilization in the form of insoluble carbonates. Mortars with four different types of cements (CEM-I, CEM-II, CAC and CSA) have been developed by the addition of inertized fly ash in the form of carbonates, in the proportion of 10% in weight of the aggregates used. The samples tested include different proportions in the use of aggregates with different sizes (0/2 and 0/4), and in the cement/aggregate ratio (1/1 and 1/3). Physical/mechanical properties of these mortars have been studied through workability, dimensional stability, carbonation, porosity and mechanic strength tests. Leaching tests of Zn, Pb, Cu and Cd ions are also being performed on monolithic samples of the best behavioral mortars. The content in leachated heavy metal ions is being analyzed through stripping voltammetry determination. Conclusions drawn are that the tested CAC and CSA cement mortars present much better behavior than those of CEM-I and CEM-II cement. The results are especially remarkable for the CAC cement mortars, improving reference mortars compression strengths in more than 48%, and also bending strengths in more than 67%. Leaching tests confirm that the encapsulation of Zn and Pb is achieved and leachate of both ions is mitigated within the mortar matrixes. For the above stated reasons, it might be concluded that mortars made with calcium aluminate cements or calcium sulfoaluminate with the incorporation of treated fly ash, may be perfectly valid for uses in which a fast-curing product, with high initial strength and drying shrinkage compensation with a high dimensional stability is required. Based on this, the material could be used as repair mortar for structures, roads and industrial pavements requiring high performance, such as: industrial floorings, landing tracks, parking lots, etc. Alternatively, it could also be used in the manufacture of prefabricated elements without structural reinforcement, given its high bending strength.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.