Development of an intervention to support medication management in patients with multimorbidity in primary care

The overarching aim of this thesis was to develop an intervention to support patient-centred prescribing in the context of multimorbidity in primary care. Methods A range of research methods were used to address different components of the Medical Research Council, UK (MRC) guidance on the development and evaluation of complex interventions in health care. The existing evidence on GPs’ perceptions of the management of multimorbidity was systematically reviewed. In qualitative interviews, chart-stimulated recall was used to explore the challenges experienced by GPs when prescribing for multimorbid patients. In a cross-sectional study, the psychosocial issues that complicate the management of multimorbidity were examined. To develop the complex intervention, the Behaviour Change Wheel (BCW) was used to integrate behavioural theory with the findings of these three studies. A feasibility study of the new intervention was then conducted with GPs. Results The systematic review revealed four domains of clinical practice where GPs experienced difficulties in multimorbidity. The qualitative interview study showed that GPs responded to these difficulties by ‘satisficing’. In multimorbid patients perceived as stable, GPs preferred to ‘maintain the status quo’ rather than actively change medications. In the cross-sectional study, the significant association between multimorbidity and negative psychosocial factors was shown. These findings informed the development of the ‘Multimorbidity Collaborative Medication Review and Decision-making’ (MY COMRADE) intervention. The intervention involves peer support: two GPs review the medications prescribed to a complex multimorbid patient together. In the feasibility study, GPs reported that the intervention was appropriate for the context of general practice; was widely applicable to their patients with multimorbidity; and recommendations for optimising medications arose from all collaborative reviews. Conclusion Applying theory to empirical data has led to an intervention that is implementable in clinical practice, and has the potential to positively change GPs’ behaviour in the management of medications for patients with multimorbidity.

Estado nutricional y etapas de cambio comportamental frente a la actividad física niños y adolescentes de Bogotá, Colombia: Estudio FUPRECOL

Objetivo: El propósito del estudio fue relacionar la etapa en el cambio en el comportamiento frente a la actividad física y el estado nutricional en escolares entre 9 y 17 años de Bogotá- Colombia, pertenecientes al estudio FUPRECOL. Método: Se trata de un estudio transversal, en 6.606 niños y adolescentes entre 9 y 17 años, pertenecientes a 24 instituciones educativas, de Bogotá-Colombia. Se aplicó de manera auto-diligenciada el cuestionario de cambio de comportamiento en función a la intensión de realizar actividad física (CCC-Fuprecol) y se midió el peso y la estatura para determinar el estado nutricional con el índice de masa corporal (IMC). Resultados: El porcentaje de respuesta fue 94% y se consideraron válidos 6,606 registros, siendo 58.3 % (n=3.850) niñas con un promedio de edad de 12,7±2,3 años. En la población general, el 5,3 % de los escolares se encontraban en etapa de pre-contemplación, 31,8 % en contemplación, el 26,7 % en acción y el 36,2 % en etapa de mantenimiento. Al comparar la etapa de cambio con el estado nutricional por IMC, los escolares clasificados en obesidad mostraron mayor frecuencia de respuesta en la etapa de pre-contemplación, mientras que los escolares con peso saludable acusaron mayores porcentajes en la etapa de mantenimiento. Conclusión: En escolares de Bogotá, Colombia, se encontró una relación estadísticamente significativa entre a la intensión de realizar actividad con el estado nutricional medido con el IMC. Fomentar la promoción de la actividad física y monitorear el estado nutricional, deberá ser una prioridad en las agendas y políticas públicas dentro del ámbito escolar.

Etapas de cambio conductual relacionado al consumo de frutas y verduras en escolares de Bogotá, Colombia

Objetivo: Describir la relación de las etapas de cambio conductual frente al consumo de frutas y verduras con el estado nutricional en un grupo de escolares de Bogotá, Colombia, pertenecientes al estudio FUPRECOL. Métodos: Estudio de corte transversal en 1.922 niños y adolescentes entre 9 y 17 años, pertenecientes a nueve instituciones educativas oficiales de Bogotá. Se aplicó de manera auto-diligenciada el cuestionario de cambio de comportamiento (CCC-Fuprecol) validado en el “estudio FUPRECOL” y se calculó el Índice de Masa Corporal (IMC) como marcador del estado nutricional. Se calcularon prevalencias y se establecieron asociaciones mediante modelos de regresión logística binaria. Resultados: La muestra estuvo conformada por 1.045 niños-niñas y adolescentes vs hombres (45.6%) y mujeres (54.3%) y 877. La mayor proporción de consumo de frutas en el subgrupo de hombres (niños entre 9 y 12 años vs. adolescentes entre 13 y 17 años) se observó en la etapa de mantenimiento, (53.3 % vs. 38.8 %, X2 p<0.001), seguido de preparación/acción (25.0 % vs. 32.4 %, X2 p<0.001). En mujeres entre 9 y 12 años, la mayor proporción se ubicó en la etapa de mantenimiento (54.4 %), a diferencia de las adolescentes entre 13 y 17 años que acusaron mayor frecuencia la etapa de preparación/acción (42.0 %). Se observó que pertenecer al grupo de mujeres, se asociaba como variable para el cumplimiento de la recomendación mínima de frutas y verduras con valores de OR 1.54 (IC95% 1.22-1.93) y OR 1.48 (IC95% 1.19-1.84), respectivamente. Conclusiones: Aproximadamente, 66 % de los participantes tienen la intención o la voluntad de cumplir las recomendaciones de consumo de frutas y verduras. La identificación temprana de niños y adolescentes con bajo consumo de alimentos vegetales, permitirá implementar intervenciones para promover comportamientos saludables a fin de prevenir el riesgo cardiometabólico en la edad adulta.

Understanding food waste through behavioural theories in different settings

SDG 12.3 aims to promote sustainable consumption and production patterns by addressing the global food loss and waste problem. Given the multiple interrelated impacts, food waste is recognized as one of the major food system challenges. The scope of this work is to contribute to the understanding on food waste generation and potential approaches to tackle it. This work was specifically designed to achieve the following goals: 1) Understand specific factors that affect individual behaviours to generate FW at household, 2) Analyse the effective ways to reduce FW through behaviour change perspective given the catering and hospitality sector, and 3) Provide an evidence synthesis on intervention study that incorporate stakeholder insights focus on school meals. The first goal of identifying food waste drivers was achieved by the systematically reviewing on peer-reviewed and grey literature. The Motivation-Opportunity-Ability (MOA) framework was applied to frame consumer behavioural drivers and identify levers that could be potentially utilized to reduce food waste. Consumer segmentation was further discussed to provide insights for developing tailored food waste reduction interventions. The second goal required the identification on practical interventions, which has been accomplished by systematic literature review basing on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The efficiency and working mechanism of interventions were evaluated basing on the combination of MOA and behavioural change wheel. Building on the evidence of effective interventions, a roadmap was developed for policymakers and practitioners to lead their own pathway on intervention study and upscaling. The third aim has been achieved with a school meals interventions mapping and the implementation of stakeholder workshops. The method was built on the literature review and then enriched by intervention co-design dialogue among stakeholders. The overall conclusion addressed challenges of food waste determents identification, tailored reduction interventions developing, sustainable consumption promotion with school meals.

Exploring Change in Neanderthal Behavioural Complexity: An Innovative Approach to the Study of Neanderthal Behaviour

Diachronic approaches provide potential for a more sophisticated framework within which to examine change in Neanderthal behavioural complexity using archaeological proxies such as symbolic artefacts, faunal assemblages and technology. Analysis of the temporal appearance and distribution of such artefacts and assemblages provide the basis for identifying changes in Neanderthal behavioural complexity in terms of symbolism, faunal extraction and technology respectively. Although changes in technology and faunal extraction were examined in the wider study, only the results of the symbolic study are presented below to illustrate the potential of the approach.

A FEM-based model to study the behaviour of corroded RC beams shear repaired by NSM CFRP rods technique

This paper presents the main features of finite element FE numerical model developed using the computer code FEMIX to predict the near-surface mounted NSM carbon-fiber-reinforced polymer CFRP rods shear repair contribution to corroded reinforced concrete RC beams. In the RC beams shear repaired with NSM technique, the Carbon Fibre Reinforced Polymer (CFRP) rods are placed inside pre-cut grooves onto the concrete cover of the RC beam’s lateral faces and are bonded to the concrete with high epoxy adhesive. Experimental and 3D numerical modelling results are presented in this paper in terms of load-deflection curves, and failure modes for 4 short corroded beams: two corroded beams (A1CL3-B and A1CL3-SB) and two control beams (A1T-B and A1T-SB), the beams noted with B were let repaired in bending only with NSM CFRP rods while the ones noted with SB were repaired in both bending and shear with NSM technique. The corrosion of the tensile steel bars and its effect on the shear capacity of the RC beams was discussed. Results showed that the FE model was able to capture the main aspects of the experimental load-deflection curves of the RC beams, moreover it has presented the experimental failure modes and FE numerical modelling crack patterns and both gave similar results for non-shear repaired beams which failed in diagonal tension mode of failure and for shear-repaired beams which failed due to large flexural crack at the middle of the beams along with the concrete crushing, three dimensional crack patterns were produced for shear-repaired beams in order to investigate the splitting cracks occurred at the middle of the beams and near the support.

A FEM-based model to study the behaviour of corroded RC beams shear repaired by NSM CFRP rods technique

This paper presents the main features of finite element FE numerical model developed using the computer code FEMIX to predict the near-surface mounted NSM carbon-fiber-reinforced polymer CFRP rods shear repair contribution to corroded reinforced concrete RC beams. In the RC beams shear repaired with NSM technique, the Carbon Fibre Reinforced Polymer (CFRP) rods are placed inside pre-cut grooves onto the concrete cover of the RC beam’s lateral faces and are bonded to the concrete with high epoxy adhesive. Experimental and 3D numerical modelling results are presented in this paper in terms of load-deflection curves, failure modes and slip information of the tensile steel bars for 4 short corroded beams: two corroded beams (A1CL3-B and A1CL3-SB) and two control beams (A1T-B and A1T-SB), the beams noted with B were let repaired in bending only with NSM CFRP rods while the ones noted with SB were repaired in both bending and shear with NSM technique. The corrosion of the tensile steel bars and its effect on the shear capacity of the RC beams was discussed. Results showed that the FE model was able to capture the main aspects of the experimental load-deflection curves of the RC beams, moreover it has presented the experimental failure modes and FE numerical modelling crack patterns and both gave similar results for non-shear repaired beams which failed in diagonal tension mode of failure and for shear-repaired beams which failed due to large flexural crack at the middle of the beams along with the concrete crushing, three dimensional crack patterns were produced for shear-repaired beams in order to investigate the splitting cracks occurred at the middle of the beams and near the support.

Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls

Timber frame buildings are well known as an efficient seismic resistant structure popular all over the world not only due to their seismic performance, but also to their low cost and the strength they offer. These constructions still exist today and it is important to be able to preserve them, so a better knowledge on their behaviour is sought. Furthermore, historic technologies could be used even in modern constructions to build seismic resistant buildings using more natural materials with lesser costs. A great rehabilitation effort is being carried out on this type of buildings, as their neglect has led to decay or their change in use and alterations to the structure has led to the need to retrofit such buildings; only recently studies on their behaviour have become available and only a few of them address the issue of possible strengthening techniques for this kind of walls. In this scope, an innovative retrofitting technique (near surface mounted steel flat bars) is proposed and validated on traditional timber frame walls based on an extensive experimental program. The results of the static cyclic tests on distinct wall typologies retrofitted with the NSM technique are herein presented and discussed in detail. The main features on deformation, lateral stiffness, lateral resistance and seismic performance indexes are analysed

Fashion communication: a way to change comsumption behaviour towards ethical fashion

In view of the major social and environmental problems, with which we are faced nowadays, we noticed a certain absence of values in society, where man draws many more resources than nature can replace in the short or medium term. Within the framework of fashion emerges the ethical fashion as a movement in this direction, intending to change this current paradigm. Ethical fashion encompasses different concepts such as fair trade, sustainability, working conditions, raw materials, social responsibility and the protection of animals. This study aims to determine which type of communication are fashion brands using in this context, and if this communication aims at educating the consumer for a more ethical consumer behavior. For this study were selected 44 fashion brands associated with the Ethical Trade Initiative. The method used for the research development was content analysis for which first was made a data collection of the information provided on the websites and social networks of the selected fashion brands. The data was analyzed taking into account the quality and type of information published related to ethical fashion, for which an ordinal scale was created as a way of measuring and comparing results.

Analyse technique du taux de change nominal.

Rapport de recherche

L’appel conjoint de la FEE et d’Eurosif pour une amélioration de la divulgation de l’information extra-financière : « drive change in corporate behaviour »

Suite à la table ronde qui s’est tenue le 29 avril 2009 au Parlement européen consacrée au thème de la « Sustainability Disclosure », la Fédération des Experts comptables Européens (FEE) et l’European Sustainable Investment Forum (Eurosif) viennent de diffuser un plan d’actions destiné à améliorer la divulgation des informations extra-financières des sociétés cotées et non cotées contenues dans leurs documents financiers.

Effect of mycorrhizae and pH change at the root-soil interface on phosphorus uptake by Sorghum using a rhizocylinder technique

Sorghum (Sorghum bicolor) was grown for 40 days in. rhizocylinder (a growth container which permitted access to rh zosphere and nonrhizosphere soil), in two soils of low P status. Soils were fertilized with different rates of ammonium and nitrate and supplemented with 40 mg phosphorus (P) kg(-1) and inoculated with either Glomus mosseae (Nicol. and Gerd.) or nonmycorrhizal root inoculum.. N-serve (2 mg kg(-1)) was added to prevent nitrification. At harvest, soil from around the roots was collected at distances of 0-5, 5-10, and 10-20 mm from the root core which was 35 mm diameter. Sorghum plants, with and without mycorrhiza, grew larger with NH4+ than with NO3- application. After measuring soil pH, 4 3 suspensions of the same sample were titrated against 0.01 M HCl or 0.01 M NaOH until soil pH reached the nonplanted pH level. The acid or base requirement for each sample was calculated as mmol H+ or OFF kg(-1) soil. The magnitude of liberated acid or base depended on the form and rate of nitrogen and soil type. When the plant root was either uninfected or infected with mycorrhiza., soil pH changes extended up to 5 mm from the root core surface. In both soils, ammonium as an N source resulted in lower soil pH than nitrate. Mycorrhizal (VAM) inoculation did not enhance this difference. In mycorrhizal inoculated soil, P depletion extended tip to 20 mm from the root surface. In non-VAM inoculated soil P depletion extended up to 10 mm from the root surface and remained unchanged at greater distances. In the mycorrhizal inoculated soils, the contribution of the 0-5 mm soil zone to P uptake was greater than the core soil, which reflects the hyphal contribution to P supply. Nitrogen (N) applications that caused acidification increased P uptake because of increased demand; there is no direct evidence that the increased uptake was due to acidity increasing the solubility of P although this may have been a minor effect.

Enhancing change detection in low-quality surveillance footage using markov random fields

Urban surveillance footage can be of poor quality, partly due to the low quality of the camera and partly due to harsh lighting and heavily reflective scenes. For some computer surveillance tasks very simple change detection is adequate, but sometimes a more detailed change detection mask is desirable, eg, for accurately tracking identity when faced with multiple interacting individuals and in pose-based behaviour recognition. We present a novel technique for enhancing a low-quality change detection into a better segmentation using an image combing estimator in an MRF based model.