Fast recovery from node compromise in wireless sensor networks

Wireless Sensor Networks (WSNs) are susceptible to a wide range of security attacks in hostile environments due to the limited processing and energy capabilities of sensor nodes. Consequently, the use of WSNs in mission critical applications requires reliable detection and fast recovery from these attacks. While much research has been devoted to detecting security attacks, very little attention has been paid yet to the recovery task. In this paper, we present a novel mechanism that is based on dynamic network reclustering and node reprogramming for recovering from node compromise. In response to node compromise, the proposed recovery approach reclusters the network excluding compromised nodes; thus allowing normal network operation while initiating node recovery procedures. We propose a novel reclustering algorithm that uses 2-hop neighbourhood information for this purpose. For node reprogramming we propose the modified Deluge protocol. The proposed node recovery mechanism is both decentralized and scalable. Moreover, we demonstrate through its implementation on a TelosB-based sensor network testbed that the proposed recovery method performs well in a low-resource WSN.

Lightweight authentication for recovery in wireless sensor networks

Wireless sensor networks (WSNs) suffer from a wide range of security attacks due to their limited processing and energy capabilities. Their use in numerous mission critical applications, however, requires that fast recovery from such attacks be achieved. Much research has been completed on detection of security attacks, while very little attention has been paid to recovery from an attack. In this paper, we propose a novel, lightweight authentication protocol that can secure network and node recovery operations such as re-clustering and reprogramming. Our protocol is based on hash functions and we compare the performance of two well-known lightweight hash functions, SHA-1 and Rabin. We demonstrate that our authentication protocol can be implemented efficiently on a sensor network test-bed with TelosB motes. Further, our experimental results show that our protocol is efficient both in terms of computational overhead and execution times which makes it suitable for low resourced sensor devices.

Wireless sensor networks for in-situ image validation for water and nutrient management

Water and Nitrogen (N) are critical inputs for crop production. Remote sensing data collected from multiple scales, including ground-based, aerial, and satellite, can be used for the formulation of an efficient and cost effective algorithm for the detection of N and water stress. Formulation and validation of such techniques require continuous acquisition of ground based spectral data over the canopy enabling field measurements to coincide exactly with aerial and satellite observations. In this context, a wireless sensor in situ network was developed and this paper describes the results of the first phase of the experiment along with the details of sensor development and instrumentation set up. The sensor network was established based on different spatial sampling strategies and each sensor collected spectral data in seven narrow wavebands (470, 550, 670, 700, 720, 750, 790 nm) critical for monitoring crop growth. Spectral measurements recorded at required intervals (up to 30 seconds) were relayed through a multi-hop wireless network to a base computer at the field site. These data were then accessed by the remote sensing centre computing system through broad band internet. Comparison of the data from the WSN and an industry standard ground based hyperspectral radiometer indicated that there were no significant differences in the spectral measurements for all the wavebands except for 790nm. Combining sensor and wireless technologies provides a robust means of aerial and satellite data calibration and an enhanced understanding of issues of variations in the scale for the effective water and nutrient management in wheat.

Performance analysis of receive diversity in wireless sensor networks over GBSBE models

Wireless sensor networks have attracted a lot of attention recently. In this paper, we develop a channel model based on the elliptical model for multipath components involving randomly placed scatterers in the scattering region with sensors deployed on a field. We verify that in a sensor network, the use of receive diversity techniques improves the performance of the system. Extensive performance analysis of the system is carried out for both single and multiple antennas with the applied receive diversity techniques. Performance analyses based on variations in receiver height, maximum multipath delay and transmit power have been performed considering different numbers of antenna elements present in the receiver array, Our results show that increasing the number of antenna elements for a wireless sensor network does indeed improve the BER rates that can be obtained.

Secure connectivity model in wireless sensor networks (WSN) using first order Reed-Muller codes

In this paper, we suggest the idea of separately treating the connectivity and communication model of a Wireless Sensor Network (WSN). We then propose a novel connectivity model for a WSN using first order Reed-Muller Codes. While the model has a hierarchical structure, we have shown that it works equally well for a Distributed WSN. Though one can use any communication model, we prefer to use the communication model suggested by Ruj and Roy [1] for all computations and results in our work. Two suitable secure (symmetric) cryptosystems can then be applied for the two different models, connectivity and communication respectively. By doing so we have shown how resiliency and scalability are appreciably improved as compared to Ruj and Roy [1].

Implementing recovery in low-resource stationary wireless sensor networks

Implementation of certain types of protocols on wireless sensor networks (WSNs) can be difficult due to the architecture of the motes. Identification of these issues and recommendations for workarounds can be very useful for the WSN research community testing hardware. In recent work, the authors developed and implemented clustering, reprogramming and authentication protocols involved in recovering WSNs with low resources. In attempting to integrate these protocols, several issues arose in the implementation phase connected to pre-set configurations of the motes used. In this paper, we describe the issues arising in integrating our protocols using Zigbee with IEEE 802.15.4 and the reprogramming module Deluge, and compare our challenges and solutions with those faced by other researchers in this area. Finally, we provide recommendations for consideration by researchers who may in future consider integrating several protocols on these platforms.

Quality control of sensor network data

A wireless sensor network (WSN) is a group of sensors that are geographically distributed and interconnected by wireless networks. Sensors gather information about the state of physical world. Then, after processing forward them to the main destination. To be able to provide this service, there are many aspects of communication techniques that need to be explored. Supporting quality of service (QoS) will be of critical importance for pervasive WSNs that serve as the network infrastructure of diverse applications. To illustrate new research and development interests in this field, this paper examines and discusses the requirements, critical challenges, and open research issues on QoS management in WSNs. A brief overview of recent progress is given.

Recover fault services via complex service-to-node mappings in wireless sensor networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node's perspective i.e., migrating the service of faulty node to it's nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don't fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level. © 2014 Springer Science+Business Media New York.

A data fusion method in wireless sensor networks

The success of a Wireless Sensor Network (WSN) deployment strongly depends on the quality of service (QoS) it provides regarding issues such as data accuracy, data aggregation delays and network lifetime maximisation. This is especially challenging in data fusion mechanisms, where a small fraction of low quality data in the fusion input may negatively impact the overall fusion result. In this paper, we present a fuzzy-based data fusion approach for WSN with the aim of increasing the QoS whilst reducing the energy consumption of the sensor network. The proposed approach is able to distinguish and aggregate only true values of the collected data as such, thus reducing the burden of processing the entire data at the base station (BS). It is also able to eliminate redundant data and consequently reduce energy consumption thus increasing the network lifetime. We studied the effectiveness of the proposed data fusion approach experimentally and compared it with two baseline approaches in terms of data collection, number of transferred data packets and energy consumption. The results of the experiments show that the proposed approach achieves better results than the baseline approaches.

Energy efficient sleep schedule with service coverage guarantee in wireless sensor networks

Service oriented architecture has been proposed to support collaborations among distributed wireless sensor network (WSN) applications in an open dynamic environment. However, WSNs are resource constraint, and have limited computation abilities, limited communication bandwidth and especially limited energy. Fortunately, sensor nodes in WSNs are usually deployed redundantly, which brings the opportunity to adopt a sleep schedule for balanced energy consumption to extend the network lifetime. Due to miniaturization and energy efficiency, one sensor node can integrate several sense units and support a variety of services. Traditional sleep schedule considers only the constraints from the sensor nodes, can be categorized to a one-layer (i.e., node layer) issue. The service oriented WSNs should resolve the energy optimization issue considering the two-layer constraints, i.e., the sensor nodes layer and service layer. Then, the one-layer energy optimization scheme in previous work is not applicable for service oriented WSNs. Hence, in this paper we propose a sleep schedule with a service coverage guarantee in WSNs. Firstly, by considering the redundancy degree on both the service level and the node level, we can get an accurate redundancy degree of one sensor node. Then, we can adopt fuzzy logic to integrate the redundancy degree, reliability and energy to get a sleep factor. Based on the sleep factor, we furthermore propose the sleep mechanism. The case study and simulation evaluations illustrate the capability of our proposed approach.

Wireless sensor networks Zigbee applied on sewage treatment station

The good efficiency in a sewage treatment plant (WWTP) is a great importance to the environment. The management of electromechanical equipment installed in these stations is a major challenge due to the fact that they are installed on areas of difficult access and maintenance unhealthy and making the time for the correction of any faults is extended. This paper proposes the development of a Wireless Sensor Network (WSN), in order to monitor electromechanical equipment, allowing the Concessionaire a predictive control in real time. The design of a wireless sensors network for monitoring equipment requires not only the development and assembly of the sensor modules, but must also include the development of software for managing the data collected. Thus, this work includes a Zigbee WSN, small, adapted for monitoring of electromechanical equipment and environmental conditions of a WWTP, type stabilization pond, installed in an area of approximately 0.15 km 2 and the average flow of 320 liters of treatment per second. The experimental results show that this monitoring system can perform with the collection of parameters of performance and quality assessment at the station.

Self-optimization of dense wireless sensor networks based on simulated annealing

Wireless sensor network (WSN) Is a technology that can be used to monitor and actuate on environments in a non-intrusive way. The main difference from WSN and traditional sensor networks is the low dependability of WSN nodes. In this way, WSN solutions are based on a huge number of cheap tiny nodes that can present faults in hardware, software and wireless communication. The deployment of hundreds of nodes can overcome the low dependability of individual nodes, however this strategy introduces a lot of challenges regarding network management, real-time requirements and self-optimization. In this paper we present a simulated annealing approach that self-optimize large scale WSN. Simulation results indicate that our approach can achieve self-optimization characteristics in a dynamic WSN. © 2012 IEEE.