Produção de biogás a partir da co-digestão de resíduos da geração de energia

Aplicações de microalgas tem tornado esses micro-organismos importantes em pesquisas com fins tanto comerciais como energéticos. A biofixação de CO2 por microalgas é vista como uma forma economicamente viável e ambientalmente sustentável para mitigar as emissões de CO2 e geração de biomassa para obtenção de bioprodutos de alto valor agregado como os biocombustíveis. Na digestão anaeróbia da biomassa de microalgas a adição de um cosubstrato rico em carbono pode facilitar o processo de produção de biogás. O glicerol possui alta concentração de carbono orgânico e é solúvel em água. Neste sentido, a combinação de ambos os substratos pode solucionar um dos principais problemas para o processo de digestão, que reside no equilíbrio da razão (C/N). Co-digestão anaeróbia consiste na digestão anaeróbia de uma mistura de dois ou mais substratos com composições complementares. O objetivo do estudo foi avaliar a geração de biogás através da co-digestão anaeróbia de biomassa de Spirulina sp. LEB 18 e glicerol bruto. Para a realização do estudo foram construídos e operados sete biorreatores com volume útil de 1,5 L, alimentados com 5, 6, 10, 15 e 20 g.L -1 da mistura de biomassa de Spirulina e glicerol. A adição de diferentes quantidades de glicerol (5 e 10 g.L -1 ) foi utilizada como um suplemento na digestão anaeróbia em sistema de batelada. A razão C/N variou de 3,3×103 a 23,7. Os ensaios foram realizados a 35 °C, em reatores equipados com sistema de coleta de gás, alimentação e retirada do efluente líquido, operados em batelada sequencial. O efluente líquido dos reatores foi analisado quanto ao pH, nitrogênio amoniacal e alcalinidade. O volume de biogás produzido diariamente foi medido em gasômetro de frasco invertido. Em todos os ensaios, os valores médios de pH variaram de 7,0 a 7,3 e nitrogênio amoniacal de 62,02 a 1100,99 mg.L-1 . A alcalinidade do efluente variou entre 1133,37 e 3578,98 mg.L-1 CaCO3. Em todos os ensaios com adição de glicerol houve incremento na produção específica de biogás (0,16 – 0,24 d -1 ) quando comparado ao ensaio em que somente biomassa microalgal era alimentada no processo (0,03 L.d-1 ), demonstrando ser esta uma alternativa interessante para a produção de biocombustível e concomitante agregação de valor ao glicerol residual da produção de biodiesel.

Transfusão de sangue nos sistemas de saúde: do abastecimento ao consumo

Em Portugal o “Sistema Nacional de Sangue” subsiste com base numa cadeia de abastecimento de sangue assente em dádivas provenientes 100% de Dadores Voluntários não Remunerados, com um serviço nacional de sangue de base exclusivamente pública. O seu modelo organizacional assenta numa estrutura de âmbito nacional com funções de regulação, fiscalização, produção e distribuição de sangue e componentes sanguíneos às organizações de saúde públicas e privadas. Em complemento a esta rede de abastecimento existem ainda outras fontes de abastecimento, como os hospitais licenciados e outras instituições, que também procedem a todas as actividades de colheita, processamento e validação para uso final de componentes sanguíneos. Nestas situações a produção de componentes sanguíneos é realizada numa perspectiva de auto-suficiência, local ou regional, um dos princípios fundamentais de todos os serviços nacionais de sangue. Esta dissertação pretende contribuir para o conhecimento do sistema de abastecimento e consumo de sangue, aproveitando para colocar algumas questões em relação ao pode significar a gestão eficiente e eficaz da cadeia de abastecimento de sangue. A gestão eficaz da cadeia de abastecimento passa pelo conhecimento profundo da sua população de dadores, saber quem são, o que os move, quais os seus comportamentos perante a dádiva. Só assim é possível intervir eficazmente e adequar as estratégias mais eficazes à sua motivação e fidelização dádiva regular. Assim, foi efectuado um caso de estudo relativo à população de dadores do Serviço de ImunoHemoterapia do Centro Hospitalar de Vila Nova de Gaia- Espinho (CHVNG- Espinho), por forma a procurar oportunidades de melhoria nas estratégias de angariação de dadores e promoção da dádiva de sangue, acrescentando valor ao serviço e ao CHVNG-Espinho.

Participação artística : dinamização do Ecomuseu de Torredeita

O presente projeto propõe acrescentar valor ao património do Ecomuseu de Torredeita através da Animação Artística. A criação de uma performance artística traduzida numa visita itinerante pelo Ecomuseu, é a proposta apresentada no sentido de dinamizar a localidade de Torredeita e o Ecomuseu em si. O trabalho é realizado em conjunto com a comunidade, mobilizando sinergias locais e chamando todos os intervenientes a ter um papel ativo na participação artística. A música, o teatro, as tradições e o humor dão vida a cenários museológicos característicos de ofícios e profissões antigas. O que é a arte como trabalho coletivo e até que ponto a animação artística poderá trazer valor a espaços museológicos são questões que este projeto coloca.

Evaluation of the genotoxicity of cellulose nanofibers

Background: Agricultural products and by products provide the primary materials for a variety of technological applications in diverse industrial sectors. Agro-industrial wastes, such as cotton and curaua fibers, are used to prepare nanofibers for use in thermoplastic films, where they are combined with polymeric matrices, and in biomedical applications such as tissue engineering, amongst other applications. The development of products containing nanofibers offers a promising alternative for the use of agricultural products, adding value to the chains of production. However, the emergence of new nanotechnological products demands that their risks to human health and the environment be evaluated. This has resulted in the creation of the new area of nanotoxicology, which addresses the toxicological aspects of these materials.Purpose and methods: Contributing to these developments, the present work involved a genotoxicological study of different nanofibers, employing chromosomal aberration and comet assays, as well as cytogenetic and molecular analyses, to obtain preliminary information concerning nanofiber safety. The methodology consisted of exposure of Allium cepa roots, and animal cell cultures (lymphocytes and fibroblasts), to different types of nanofibers. Negative controls, without nanofibers present in the medium, were used for comparison.Results: The nanofibers induced different responses according to the cell type used. In plant cells, the most genotoxic nanofibers were those derived from green, white, and brown cotton, and curaua, while genotoxicity in animal cells was observed using nanofibers from brown cotton and curaua. An important finding was that ruby cotton nanofibers did not cause any significant DNA breaks in the cell types employed.Conclusion: This work demonstrates the feasibility of determining the genotoxic potential of nanofibers derived from plant cellulose to obtain information vital both for the future usage of these materials in agribusiness and for an understanding of their environmental impacts.

Evolução da capacidade preditiva da informação contábil : um estudo a partir dos disclosures das Companhias listadas na BM&FBovespa após a adoção das Normas Internacionais de Contabilidade no Brasil

Dissertação (mestrado)—Universidade de Brasília, Universidade Federal da Paraíba, Universidade Federal do Rio Grande do Norte, Programa de Pós-Graduação Multiinstitucional e Inter-Regional de Pós-Graduação em Ciências Contábeis, 2016.

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Modelo de Contabilidade Analítica aplicado à Direção de Abastecimento

A evidente competitividade de mercado que se regista na atualidade no meio empresarial, promove o esforço por parte dos organismos do Estado em controlar os seus gastos e maximizar a eficiência dos serviços, mantendo o nível de satisfação por parte do cliente. A Contabilidade Analítica tem a capacidade de custear os produtos ou as atividades de uma organização recorrendo a métodos de custeio como sejam, o método das Secções Homogéneas ou o Activity Based Costing. A presente dissertação, seguindo a metodologia de investigação em Ciências Socias, produz um modelo de custeio dos produtos e atividades de um organismo da Marinha Portuguesa, a Direção de Abastecimento. A construção do modelo, com recurso ao método de investigação estudo de caso, requere um estudo aprofundado da entidade e dos processos que realiza. A análise realizada permitiu definir o modelo de Secções Homogéneas com custeio acessório das atividades como o mais apropriado à organização em estudo. A constituição do modelo teórico permitiu a recolha dos procedimentos necessários à sua implementação, tendo sido verificada a exequibilidade do mesmo em SIGDN, com resultados positivos. Realizou-se acessoriamente um teste em condições reais ao modelo sendo possível obter resultados do custeio dos produtos e das atividades da Direção de Abastecimento. A investigação permitiu dar resposta a todas as questões enunciadas, cumprir os objetivos propostos e solucionar a problemática evidenciada. Foi assim possível, verificar a importância dada pela Marinha ao desenvolvimento da Contabilidade Analítica, efetuar uma análise profunda da organização da Direção de Abastecimento e criar um modelo de custeio dos produtos e atividades, capaz de acrescentar valor no suporte à tomada de decisão.

Economic evaluations of clinical pharmacy services in Ireland, 2007-2015

Introduction The concept of this thesis was driven by stagnation within the Irish healthcare system. Multiple reports from pharmacy organisations had outlined possible future directions for the profession but progress was minimal, especially in comparison with other countries. The author’s directive was to evaluate the economic impact of a series of clinical pharmacy services (CPS) in hospital and community settings. Methods A systematic review of economic evaluations of clinical pharmacy services in hospital patients was undertaken to gain insight into recent research in the field. Eligible studies were evaluated using the Consolidated Health Economic Evaluation Reporting Standards (CHEERS), to establish the quality, consistency and transparency of relevant research. A retrospective analysis of an internal hospital pharmacy interventions database was conducted. A method first described by Nesbit et al. was implemented to estimate the level of cost avoidance achieved. A cost-effectiveness analysis based on data from a randomised controlled trial of a pharmacist-supervised patient self-testing (PST) of warfarin therapy is presented. Outcome measure was the incremental cost associated with six months of intervention management. A similar cost-effectiveness analysis based on previously published RCT data was used to evaluate a novel structured pharmacist review of medication in older hospitalised patients. Cost-effectiveness analysis was presented in the form of an incremental cost-effectiveness ratio (ICER). An ICER is an additional cost per unit effect, in the case of this study, the cost of preventing an additional non-trivial ADR in hospital. A method described by Preaud et al. was adapted to estimate the clinical and economic benefit gained from vaccination of patients by a community pharmacist in Ireland in 2013/14. Sample demographic data was obtained from a national chain of community pharmacies and applied to overall national vaccination data. Results Systematic review identified twenty studies which were eligible for inclusion. Overall, pharmacist interventions had a positive impact on hospital budgets. Only three studies (15%) were deemed to be “good-quality” studies. No ‘novel’ clinical pharmacist intervention was identified during the course of this review. Analysis of internal hospital database identified 4,257 interventions documented on 2,147 individual patients over a 12 month period. Substantial cost avoidance of €710,000 was generated over a 1 year period from the perspective of the health care provider. Mean cost avoidance of €166 per intervention was generated. The cost of providing these interventions was €82,000. Substantial net cost-benefits of €626,279 and a cost-benefit ratio of 8.64 : 1 were generated based on this evaluation of pharmacist interventions. Results from an evaluation of a novel pharmacist-led form of warfarin management indicated indicated that on a per patient basis, PST was slightly more expensive than established anticoagulant management. On a per patient basis over a six month period, PST resulted in an incremental cost of €59.08 in comparison with routine care. Overall cost of managing a patient through pharmacist-supervised PST for a six month period is €226.45. However, for this increase in cost a clinically significant improvement in care was provided. Patients achieved a significantly higher time in therapeutic range during the PST arm in comparison with routine care, (72 ± 19.7% vs 59 ± 13.5%). Difference in overall cost was minimal and PST was the dominant strategy in some scenarios examined during sensitivity analysis. Structured pharmacist review of medication was determined to be dominant in comparison to usual pharmaceutical care. Even if the healthcare payer was unwilling to pay any money for the prevention of an ADR, the intervention strategy is still likely to be cost-effective (probability of being determined cost-effective = 0.707). Implementation of pharmacist-led influenza vaccination has resulted in substantial clinical and economic benefits to the healthcare system. The majority of patients (64.9%) who availed of this service had identifiable influenza-related risk factors. Of patients with influenza-related risk factors, age ≥65 year was the most commonly cited risk factor. Pharmacist vaccination services averted a total of 848 influenza cases across all age groups during the 2013/2014 influenza season. Due to receipt of vaccination in a pharmacy setting, 444 influenza-related GP visits were prevented. In terms of more serious influenza-associated events, 11 hospitalisations and five influenza-related deaths were averted. Costs averted were approximately €305,000. These were principally wider societal-related costs associated with lost productivity. Conclusion Overall, clinical pharmacy services are adding value to the Irish healthcare system in both hospital and community settings, but provision of additional funding for new services would enable them to offer a great deal more.

Optimización del proceso de empaque de BANAFRUTS S.A.S. desde el punto de vista de la Teoría de Restricciones

Como resultado de la Misión Empresarial Caribe realizada por la Escuela de Administración de la Universidad del Rosario en abril de 2016, se realizó el presente documento donde se plantea una propuesta de mejora para el proceso de empaque de BanaFruts S.A.S. mediante el uso de teorías administrativas enfocadas a la gestión de calidad del producto como: Teoría de Restricciones, Kaizen y Cero defectos. La propuesta consiste en tener un proceso de control de calidad mucho menos repetitivo y más eficiente a lo largo del empaque del producto, donde solo los operarios de desmane se deberán encargar de definir cuáles bananos cumplen o no con las especificaciones de DOLE en esa etapa y además se aseguren de cumplir con nuevos límites de saturación de los frutos en las piscinas. Éstos se encontrarán en donde se alcanza el 90% de la capacidad de cada tanque. Para el de desmane estará a una altura de 0.54m; y para el de saneo estará a una altura de 0.49m. Así se actuará der manera preventiva y no reactiva como sucede actualmente, garantizando que los bananos no se lastimen y se reduzca el exceso de revisión a lo largo del proceso. Este cambio de gestión de calidad permitirá en primera instancia que los trabajadores en etapas diferentes a las de desmane se enfoquen en una sola tarea y no tengan que volver a verificar los aspectos de calidad del producto, seguido de un aumento de productividad en el procesamiento de los bananos por parte de éstos. Adicionalmente, se hace énfasis en la importancia de la mejora continua del proceso en general para asegurar un incremento gradual en la productividad. Para esto se propone un nuevo modelo de gestión de los recursos humanos donde los operarios serán más proactivos, tendrán una mayor participación en la identificación y solución de problemas y se encargarán de llevar a cabo sus labores de manera más eficiente. En este sentido, las acciones a tomar serán: seleccionar, organizar, limpiar y estandarizar. Finalmente, hay que estandarizar el proceso, es decir que debe existir una revisión continua para no permitir que los errores se repitan. Todas estas acciones estarán a cargo de un equipo líder llamado “Equipo BanaFruts”. Éste tendrá la responsabilidad de acompañar a los trabajadores en la realización de las actividades mencionadas y medir sus resultados.

The value of adding mirror therapy for upper limb motor recovery of subacute stroke patients: a randomized controlled trial.

BACKGROUND: Upper limb paresis remains a relevant challenge in stroke rehabilitation. AIM: To evaluate if adding mirror therapy (MT) to conventional therapy (CT) can improve motor recovery of the upper limb in subacute stroke patients. DESIGN: Prospective, single-center, single-blind, randomised, controlled trial. SETTING: Subacute stroke patients referred to a Physical and Rehabilitation Medicine Unit between October 2009 and August 2011. POPULATION: Twenty-six subacute stroke patients (time from stroke <4 weeks) with upper limb paresis (Motricity Index â0/00¤ 77). METHODS: Patients were randomly allocated to the MT (N.=13) or to the CT group (N.=13). Both followed a comprehensive rehabilitative treatment. In addition, MT Group had 30 minutes of MT while the CT group had 30 minutes of sham therapy. Action Research Arm Test (ARAT) was the primary outcome measures. Motricity Index (MI) and the Functional Independence Measure (FIM) were the secondary outcome measures. RESULTS: After one month of treatment patients of both groups showed statistically significant improvements in all the variables measured (P<0.05). Moreover patients of the MT group had greater improvements in the ARAT, MI and FIM values compared to CT group (P<0.01, Glass's Î" Effect Size: 1.18). No relevant adverse event was recorded during the study. CONCLUSION: MT is a promising and easy method to improve motor recovery of the upper limb in subacute stroke patients. CLINICAL REHABILITATION IMPACT: While MT use has been advocated for acute patients with no or negligible motor function, it can be usefully extended to patients who show partial motor recovery. The easiness of implementation, the low cost and the acceptability makes this therapy an useful tool in stroke rehabilitation.

The Value of Adding Optics to Ecosystem Models: A Case Study

Many ecosystem models have been developed to study the ocean's biogeochemical properties, but most of these models use simple formulations to describe light penetration and spectral quality. Here, an optical model is coupled with a previously published ecosystem model that explicitly represents two phytoplankton (picoplankton and diatoms) and two zooplankton functional groups, as well as multiple nutrients and detritus. Surface ocean color fields and subsurface light fields are calculated by coupling the ecosystem model with an optical model that relates biogeochemical standing stocks with inherent optical properties (absorption, scattering); this provides input to a commercially available radiative transfer model (Ecolight). We apply this bio-optical model to the equatorial Pacific upwelling region, and find the model to be capable of reproducing many measured optical properties and key biogeochemical processes in this region. Our model results suggest that non-algal particles largely contribute to the total scattering or attenuation (> 50% at 660 nm) but have a much smaller contribution to particulate absorption (< 20% at 440 nm), while picoplankton dominate the total phytoplankton absorption (> 95% at 440 nm). These results are consistent with the field observations. In order to achieve such good agreement between data and model results, however, key model parameters, for which no field data are available, have to be constrained. Sensitivity analysis of the model results to optical parameters reveals a significant role played by colored dissolved organic matter through its influence on the quantity and quality of the ambient light. Coupling explicit optics to an ecosystem model provides advantages in generating: (1) a more accurate subsurface light-field, which is important for light sensitive biogeochemical processes such as photosynthesis and photo-oxidation, (2) additional constraints on model parameters that help to reduce uncertainties in ecosystem model simulations, and (3) model output which is comparable to basic remotely-sensed properties. In addition, the coupling of biogeochemical models and optics paves the road for future assimilation of ocean color and in-situ measured optical properties into the models.

Increasing the value of household appliances by adding a heat pump system

Historically, domestic tasks such as preparing food and washing and drying clothes and dishes were done by hand. In a modern home many of these chores are taken care of by machines such as washing machines, dishwashers and tumble dryers. When the first such machines came on the market customers were happy that they worked at all! Today, the costs of electricity and customers’ environmental awareness are high, so features such as low electricity, water and detergent use strongly influence which household machine the customer will buy. One way to achieve lower electricity usage for the tumble dryer and the dishwasher is to add a heat pump system. The function of a heat pump system is to extract heat from a lower temperature source (heat source) and reject it to a higher temperature sink (heat sink) at a higher temperature level. Heat pump systems have been used for a long time in refrigerators and freezers, and that industry has driven the development of small, high quality, low price heat pump components. The low price of good quality heat pump components, along with an increased willingness to pay extra for lower electricity usage and environmental impact, make it possible to introduce heat pump systems in other household products. However, there is a high risk of failure with new features. A number of household manufacturers no longer exist because they introduced poorly implemented new features, which resulted in low quality and product performance. A manufacturer must predict whether the future value of a feature is high enough for the customer chain to pay for it. The challenge for the manufacturer is to develop and produce a high-performance heat pump feature in a household product with high quality, predict future willingness to pay for it, and launch it at the right moment in order to succeed. Tumble dryers with heat pump systems have been on the market since 2000. Paper I reports on the development of a transient simulation model of a commercial heat pump tumble dryer. The measured and simulated results were compared with good similarity. The influence of the size of the compressor and the condenser was investigated using the validated simulation model. The results from the simulation model show that increasing the cylinder volume of the compressor by 50% decreases the drying time by 14% without using more electricity.  Paper II is a concept study of adding a heat pump system to a dishwasher in order to decrease the total electricity usage. The dishwasher, dishware and water are heated by the condenser, and the evaporator absorbs the heat from a water tank. The majority of the heat transfer to the evaporator occurs when ice is generated in the water tank. An experimental setup and a transient simulation model of a heat pump dishwasher were developed. The simulation results show a 24% reduction in electricity use compared to a conventional dishwasher heated with an electric element. The simulation model was based on an experimental setup that was not optimised. During the study it became apparent that it is possible to decrease electricity usage even more with the next experimental setup.

A technology diffusion perspective of Enterprise Resource Planning across European Small and Medium Enterprises: from determinants to Use to Value

Tese apresentada como requisito parcial para obtenção do grau de Doutor em Gestão de Informação