Determinação do estado fundamental de compostos antiferromagnéticos da série Tb(1-x)Y(x)RhIn(5): aproximação teórico experimental

We present the results of electrical resistivity, magnetic susceptibility, specific heat and x-ray absorption spectroscopy measurements in Tb1−xYxRhIn5 (x = 0.00, 0.15, 0.4.0, 0.50 e 0.70) single crystals. Tb1−xYxRhIn5 is an antiferromagnetic AFM compound with ordering temperature TN ≈ 46 K, the higher TN within the RRhIn5 serie (R : rare earth). We evaluate the physical properties evolution and the supression of the AFM state considering doping and Crystalline Electric Field (CEF) effects on magnetic exchange interaction between Tb3+ magnetic ions. CEF acts like a perturbation potential, breaking the (2J + 1) multiplet s degeneracy. Also, we studied linear-polarization-dependent soft x-ray absorption at Tb M4 and M5 edges to validate X-ray Absorption Spectroscopy as a complementary technique in determining the rare earth CEF ground state. Samples were grown by the indium excess flux and the experimental data (magnetic susceptibility and specific heat) were adjusted with a mean field model that takes account magnetic exchange interaction between first neighbors and CEF effects. XAS experiments were carried on Total Electron Yield mode at Laborat´onio Nacional de Luz S´ıncrotron, Campinas. We measured X-ray absorption at Tb M4,5 edges with incident polarized X-ray beam parallel and perpendicular to c-axis (E || c e E ⊥ c). The mean field model simulates the mean behavior of the whole system and, due to many independent parameters, gives a non unique CEF scheme. XAS is site- and elemental- specific technique and gained the scientific community s attention as complementary technique in determining CEF ground state in rare earth based compounds. In this work we wil discuss the non conclusive results of XAS technique in TbRhIn5 compounds.

Controle inteligente aplicado a uma mesa de coordenadas de dois graus de liberdade

This work presents the design and construction of an X-Y table of two degrees of freedom, as well as the development of a fuzzy system for its position and trajectory control. The table is composed of two bases that move perpendicularly to each other in the horizontal plane, and are driven by two DC motors. Base position is detected by position sensors attached to the motor axes. A data acquisition board performs the interface between a laptop and the plant. The fuzzy system algorithm was implemented in LabVIEW® programming environment that processes the sensors signals and determines the control variables values that drive the motors. Experimental results using position reference signals (step type signal) and straight and circular paths reference signals are presented to demonstrate the dynamic behavior of fuzzy system

A genetic algorithm approach to optimising component placement and retrieval sequence for chip shooter machines

A chip shooter machine in printed circuit board (PCB) assembly has three movable mechanisms: an X-Y table carrying a PCB, a feeder carrier with several feeders holding components and a rotary turret with multiple assembly heads to pick up and place components. In order to get the minimal placement or assembly time for a PCB on the machine, all the components on the board should be placed in a perfect sequence, and the components should be set up on a right feeder, or feeders since two feeders can hold the same type of components, and additionally, the assembly head should retrieve or pick up a component from a right feeder. The entire problem is very complicated, and this paper presents a genetic algorithm approach to tackle it.

A hybrid genetic algorithm for sequencing PCB component placement

A chip shooter machine for electronic components assembly has a movable feeder carrier holding components, a movable X-Y table carrying a printed circuit board (PCB), and a rotary turret having multiple assembly heads. This paper presents a hybrid genetic algorithm to optimize the sequence of component placements for a chip shooter machine. The objective of the problem is to minimize the total traveling distance of the X-Y table or the board. The genetic algorithm developed in the paper hybridizes the nearest neighbor heuristic, and an iterated swap procedure, which is a new improved heuristic. We have compared the performance of the hybrid genetic algorithm with that of the approach proposed by other researchers and have demonstrated our algorithm is superior in terms of the distance traveled by the X-Y table or the board.

La cultura monástica en las Cantigas de Santa María de Alfonso X : Pervivencia, adopción y reelaboración

La tesis analiza la forma en la que son presentados los monjes, las órdenes y la cultura monástica en las Cantigas de Santa María (mediados del siglo XIII) de Alfonso X, el Sabio. Se estudian no sólo la aparición de los monjes, como personajes de las cantigas narrativas, y sus diversas actividades (liturgia, plegaria, trabajo manual, lectura, estudio, etc.), sino también las diferentes fuentes que posiblemente hayan estado en la base de la gran empresa de confección de las Cantigas, en el scriptorium alfonsi. Por un lado, clérigos, frailes y monasterios estrechamente ligados a la persona misma del rey Alfonso X y a su corte (Juan Gil de Zamora, Bernardo de Brihuega, Rodrigo de Cerrato, monasterio de Las Huelgas de Burgos, etc.). Por otro, un enorme acervo de obras marianas de procedencia monacal: colecciones de milagros en latín y romance; compendios de himnos, secuencias y otros cantos litúrgicos; y obras doctrinales que contienen la marialogía monástica de los siglos anteriores. Todo ello puesto al servicio de la creación de un cancionero mariano con un específico ideal cristiano, monárquico y laico.

La cultura monástica en las Cantigas de Santa María de Alfonso X : Pervivencia, adopción y reelaboración

La tesis analiza la forma en la que son presentados los monjes, las órdenes y la cultura monástica en las Cantigas de Santa María (mediados del siglo XIII) de Alfonso X, el Sabio. Se estudian no sólo la aparición de los monjes, como personajes de las cantigas narrativas, y sus diversas actividades (liturgia, plegaria, trabajo manual, lectura, estudio, etc.), sino también las diferentes fuentes que posiblemente hayan estado en la base de la gran empresa de confección de las Cantigas, en el scriptorium alfonsi. Por un lado, clérigos, frailes y monasterios estrechamente ligados a la persona misma del rey Alfonso X y a su corte (Juan Gil de Zamora, Bernardo de Brihuega, Rodrigo de Cerrato, monasterio de Las Huelgas de Burgos, etc.). Por otro, un enorme acervo de obras marianas de procedencia monacal: colecciones de milagros en latín y romance; compendios de himnos, secuencias y otros cantos litúrgicos; y obras doctrinales que contienen la marialogía monástica de los siglos anteriores. Todo ello puesto al servicio de la creación de un cancionero mariano con un específico ideal cristiano, monárquico y laico.

Enhanced phospholipase C-gamma1 activity produced by association of independently expressed X and Y domain polypeptides.

The X and Y domains of phospholipase C (PLC)-gamma1, which are conserved in all mammalian phosphoinositide-specific PLC isoforms and are proposed to interact to form the catalytic site, have been expressed as individual hexahistidine-tagged fusion proteins in the baculovirus system. Following coinfection of insect cells with recombinant viruses, association of X and Y polypeptides was demonstrated in coprecipitation assays. When enzyme activity was examined, neither domain possessed catalytic activity when expressed alone; however, coexpression of the X and Y polypeptides produced a functional enzyme. This reconstituted phospholipase activity remained completely dependent on the presence of free Ca2+. The specific activity of the X:Y complex was significantly greater (20- to 100-fold) than that of holoPLC-gamma1 and was only moderately influenced by varying the concentration of substrate. The enzyme activities of holoPLC-gamma1 and the X:Y complex exhibited distinct pH optima. For holoPLC-gamma1 maximal activity was detected at pH 5.0, while activity of the X:Y complex was maximal at pH 7.2.

(Table 1) Occurrence of selected planktonic foraminifers, other microfossils, and lithologic components at DSDP Hole 96-619

Site 619, located in the Pigmy Basin off the coast of Louisiana, penetrated the late Quaternary Ericson Zones X, Y, and Z. The penetrated section can be divided into four intervals. The lower interval (below 157 m sub-bottom) comprises 51 m of displaced sediments which probably originated from the Louisiana continental shelf. The upper three intervals (above 157 m) are dominated by pelagic/hemipelagic sedimentation associated with a closed basin. These are divided on the basis of planktonic foraminifers into Zones X, Y, and Z. These warm-cool water intervals are identified mainly by using the Globorotalia menardii complex (warm) and G. inflata (cool). The intervals correlate with published curves taken from piston core samples in the western Gulf of Mexico.

ON SPACES OF COMPACT OPERATORS ON C(K, X) SPACES

This paper concerns the spaces of compact operators kappa(E,F), where E and F are Banach spaces C([1, xi], X) of all continuous X-valued functions defined on the interval of ordinals [1, xi] and equipped with the supremun norm. We provide sufficient conditions on X, Y, alpha, beta, xi and eta, with omega <= alpha <= beta < omega 1 for the following equivalence: (a) kappa(C([1, xi], X), C([1, alpha], Y)) is isomorphic to kappa(C([1,eta], X), C([1, beta], Y)), (b) beta < alpha(omega). In this way, we unify and extend results due to Bessaga and Pelczynski (1960) and C. Samuel (2009). Our result covers the case of the classical spaces X = l(p) and Y = l(q) with 1 < p, q < infinity.

Observaciones y simulaciones de cúmulos de galaxias

Con el desarrollo de este proyecto se pretende realizar un estudio detallado de las diferentes propiedades de los cúmulos de galaxias previéndose un amplio espectro de análisis que incluye la realización de simulaciones numéricas, observaciones espectroscópicas de galaxias en cúmulos y estudios de la emisión X proveniente del gas intra-cúmulo. Las simulaciones numéricas serán realizadas utilizando códigos de integración hidrodinámicos cosmológicos que permiten seguir la evolución dinámica de sistemas de gas y materia no-colisional en un contexto cosmológico. (...) Las observaciones espectroscópicas de galaxias en cúmulos permiten un detallado estudio de la dinámica de los cúmulos. Dichas observaciones serán realizadas en CASLEO (Centro Astronómico El Leoncito) las cuales se adicionarán al material ya existente, con el cual se podrán realizar estimas de dispersión de velocidades y estudios de subestructura entre otros estudios. En base a las imágenes públicas provenientes del satélite ROSAT se realizarán estudios detallados de las propiedades del gas caliente, permitiendo análisis de morfología y temperatura del gas intracúmulo y proporcionando valiosa información sobre el estado dinámico de los cúmulos. Uno de los objetivos centrales de este proyecto consiste en la confrontación entre las observaciones de cúmulos (tanto en el rango óptico como en rayos X) y las simulaciones numéricas. Estos estudios permitirán mejorar el conocimiento sobre diferentes propiedades de los sistemas de galaxias, los procesos de formación de estructuras y las dependencias con los parámetros cosmológicos básicos. Otros de los aspectos vinculados a los cúmulos de galaxias que se prevé abordar está asociado al hecho que estos son excelentes trazadores de la estructura en gran escala del universo, por lo cual se prevé la aplicación de diferentes técnicas estadísticas a grandes catálogos de cúmulos.