Development of a workplace wellness promotion pilot framework : a case study of the Blue Care Staff Wellness Program

Workplace wellness initiatives are currently unreflective of the multidimensional and holistic nature of the wellness construct. There exists an opportunity for promoters of health to move toward models of workplace wellness promotion that more fully appreciate the interconnected nature of health dimensions and promote them even-handedly. The Blue Care Staff Wellness Program framework was developed in response to a recognised need for consistent and wellness-focused constructs for workplace wellness promotion and dissemination. The framework promotes and supports the individual and organisational wellness of the Blue Care employee population by providing a comprehensive and sustainable employee wellness program. This has been achieved by the adoption of consistent wellness principles to guide the framework conception and theory based development. The use of the framework in a pilot program will provide insight into the frameworks effectiveness in promoting a comprehensive workplace wellness program, and go further to establish the relationship between wellness and productivity in the workplace.

The dynamics and performance of the building and construction product system

During 1999 the Department of Industry, Science and Resources (ISR) published 4 research reports it had commissioned from the Australian Expert Group in Industry Studies (AEGIS), a research centre of the University of Western Sydney, Macarthur. ISR will shortly publish the fifth and final report in this series. The five reports were commissioned by the Department, as part of the Building and Construction Action Agenda process, to investigate the dynamics and performance of the sector, particularly in relation its innovative capacity. Professor Jane Marceau, PVCR at the University of Western Sydney and Director of AEGIS, led the research team. Dr Karen Manley was the researcher and joint author on three of the five reports. This paper outlines the approach and key findings of each of the five reports. The reports examined 5 key elements of the ‘building and construction product system’. The term ‘product system’ reflects the very broad range of industries and players we consider to contribute to the performance of the building and construction industries. The term ‘product system’ also highlights our focus on the systemic qualities of the building and construction industries. We were most interested in the inter-relationships between key segments and players and how these impacted on the innovation potential of the product system. The ‘building and construction product system’ is hereafter referred to as ‘the industry’ for ease of presentation. All the reports are based, at least in part, on an interviewing or survey research phase which involved gathering data from public and private sector players nationally. The first report ‘maps’ the industry to identify and describe its key elements and the inter-relationships between them. The second report focuses specifically on the linkages between public-sector research organisations and firms in the industry. The third report examines the conditions surrounding the emergence of new businesses in the industry. The fourth report examines how manufacturing businesses are responding to customer demands for ‘total solutions’ to their building and construction needs, by providing various services to clients. The fifth report investigates the capacity of the industry to encourage and undertake energy efficient building design and construction.

Adult learning in a workplace context

In light of the changing nature of contemporary workplaces, this chapter attempts to identify employer expectations and the associated skills required to workers to function effectively in such workplaces. Workers are required to participate in informed discussion about their specific jobs and to contribute to the overall development of organisations. This requires deep understanding of domain-specific knowledge, which at times can be very complex. Workers are also required to take responsibility for their actions and are expected to be flexible so that they can be deployed to other related jobs depending on demand. Finally, workers are expected to be pro-active, be able to anticipate situations and continuously update their knowledge to address new situations. This chapter discusses the nature of knowledge and skills that will facilitate the above qualities.

Management [4th Asia Pacific Edition]

The fourth edition of this popular text has been throughly updated, continuing its strong emphasis on the importance of the Asian region to contemporary Australian and New Zealand organizations. Many Asian case examples are featured to illustrate key management concepts. ----- ----- ----- Joining the author team for this edition and enhancing this edition's critical analysis of management theory and applications are the best-selling authors from another of Wiley's undergraduate introductory management texts - Management: Core Concepts and Applications, 2nd Australasian edition (Davidson et al.).----- ----- ----- This new edition also discusses the impact of recent events such as the global financial crisis on the management of organisations, both during the crisis and in its aftermath.----- ----- ----- Of course, Management, 4th Asia- Pacific edition also retains the features that made it so popular with students and lecturers in the earlier editions: a balanced coverage of small to medium-sized enterprises and larger multinational corporations an emphasis on the need for business activities to be sustainable in terms of preserving the welfare of future generations the Career Readiness Workbook at the end of the book, which includes a range of individual and group activities to encourage the practical applications of management theory. With its clear insights into dynamics of management in the workplace of today and the future, Management, 4th Asia-Pacific edition provides a sound basis for the contemporary undergraduate study of introductory management.

Sacked! Workplace dismissals amongst youth employees

Limited academic attention has been afforded to young workers relative to their adult counterparts. This study addresses a phase of the employment relationship for young people that is very infrequently examined - during or around the time when the relationship ends. It examines the relative frequency of different forms of dismissal and the circumstances preceding the dismissals via a content analysis of 1259 cases of employee enquiries to a community advocacy organisation in Australia. Results indicate that dismissal was most commonly associated with bullying, harassment, and taking personal leave. Young men, compared to young women, were disproportionately likely to report allegations of misconduct as preceding dismissal, while females experienced higher rates of sexual harassment and discrimination. The research highlights the types and circumstances of dismissal across a range of employment contexts and reveals the complexities of youth employment relationships which may differ from those of the general workforce.

Workplace sexual harassment 30 years on : a review of the literature

Despite its proscription in legal jurisdictions around the world, workplace sexual harassment (SH) continues to be experienced by many women and some men in a variety of organizational settings. The aims of this review article are threefold: first, with a focus on workplace SH as it pertains to management and organizations, to synthesize the accumulated state of knowledge in the field; second, to evaluate this evidence, highlighting competing perspectives; and third, to canvass areas in need of further investigation. Variously ascribed through individual (psychological or legal consciousness) frameworks, sociocultural explanations and organizational perspectives, research consistently demonstrates that, like other forms of sexual violence, individuals who experience workplace SH suffer significant psychological, health- and job-related consequences. Yet they often do not make formal complaints through internal organizational procedures or to outside bodies. Laws, structural reforms and policy initiatives have had some success in raising awareness of the problem and have shaped rules and norms in the employment context. However, there is an imperative to target further workplace actions to effectively prevent and respond to SH.

Computational fluid dynamics analysis of a flat plate photocatalytic reactor for storm and wastewater reuse

A computational fluid dynamics (CFD) analysis has been performed for a flat plate photocatalytic reactor using CFD code FLUENT. Under the simulated conditions (Reynolds number, Re around 2650), a detailed time accurate computation shows the different stages of flow evolution and the effects of finite length of the reactor in creating flow instability, which is important to improve the performance of the reactor for storm and wastewater reuse. The efficiency of a photocatalytic reactor for pollutant decontamination depends on reactor hydrodynamics and configurations. This study aims to investigate the role of different parameters on the optimization of the reactor design for its improved performance. In this regard, more modelling and experimental efforts are ongoing to better understand the interplay of the parameters that influence the performance of the flat plate photocatalytic reactor.

Improving team dynamics and innovation : the “Aspect Design” approach applied to interaction design

Interaction Design is a fast developing branch of Industrial Design. The availability of cheap microprocessors and sensor electronics allow interactions between people and products that were until recently impossible. This has added additional layers of complexity to the design process. Novice designers find it difficult to effectively juggle these complexities and typically tend to focus on one aspect at a time. They also tend to take a linear, step-by-step approach to the design process in contrast to expert designers who pursue “parallel lines of thought” whilst simultaneously co-evolving both problem and solution. (Lawson, 1993) This paper explores an approach that encourages designers (in this case novice designers) to take a parallel rather than linear approach to the design process. It also addresses the problem of social loafing that tends to occur in team activities.

Flow field investigation in a water treatment reactor using computational fluid dynamics

The hydrodynamic behaviour of a novel flat plate photocatalytic reactor for water treatment is investigated using CFD code FLUENT. The reactor consists of a reactive section that features negligible pressure drop and uniform illumination of the photocatalyst to ensure enhanced photocatalytic efficiency. The numerical simulations allowed the identification of several design issues in the original reactor, which include extensive boundary layer separation near the photocatalyst support and regions of flow recirculation that render a significant portion of the reactive area. The simulations reveal that this issue could be addressed by selecting the appropriate inlet positions and configurations. This modification can cause minimal pressure drop across the reactive zone and achieves significant uniformization of the tested pollutant on the photocatalyst surface. The influence of roughness elements type has also been studied with a view to identify their role on the distribution of pollutant concentration on the photocatalyst surface. The results presented here indicate that the flow and pollutant concentration field strongly depend on the geometric parameters and flow conditions.

Below the ‘tip of the iceberg’: extra-legal responses to workplace sexual harassment

Despite longstanding and explicit legal frameworks for preventing and responding to sexual harassment, only a small proportion of those sexually harassed use legal avenues of redress to seek justice. In contrast to legal cases which constitute the ‘tip of the iceberg’, this study examines extra-legal strategies — the less visible but more frequent, ‘everyday’, formal and informal organizational practices. We report on a national prevalence survey conducted by the Australian Human Rights Commission which examined how ‘targets’ use formal organizational grievance mechanisms, and/or other informal methods to redress, resist or avoid workplace sexual harassment. The findings revealed that the majority of targets do not formally report it because of fear of retribution or that nothing will be done, but they sometimes use apparently proactive or assertive alternative strategies, such as seeking informal assistance and ‘dealing with the problem themselves’. These responses occur in the context of extra-legal facets of organizational life which affect the extent to which sexual harassment and other unfavorable and discriminatory acts are tolerated.

Molecular dynamics study of dynamic buckling properties of nanowires with defects

Based on the embedded atom method (EAM) and molecular dynamics (MD) method, the deformation properties of Cu nanowires with different single defects under dynamic compression have been studied. The mechanical behaviours of the perfect nanowire are first studied, and the critical stress decreases with the increase of the nanowire’s length, which is well agreed with the modified Euler theory. We then consider the effects to the buckling phenomenon resulted from different defects. It is found that obvious decrease of the critical stress is resulted from different defects, and the largest decrease is found in nanowire with the surface vertical defect. Surface defects are found exerting larger influence than internal defects. The buckling duration is found shortened due to different defects except the nanowire with surface horizon defect, which is also found possessing the largest deflection. Different deflections are also observed for different defected nanowires. It is find that due to surface defects, only deflection in one direction is happened, but for internal defects, more complex deflection circumstances are observed.

Assessment of corneal dynamics with high-speed swept source optical coherence tomography combined with an air puff system

We present a novel method and instrument for in vivo imaging and measurement of the human corneal dynamics during an air puff. The instrument is based on high-speed swept source optical coherence tomography (ssOCT) combined with a custom adapted air puff chamber from a non-contact tonometer, which uses an air stream to deform the cornea in a non-invasive manner. During the short period of time that the deformation takes place, the ssOCT acquires multiple A-scans in time (M-scan) at the center of the air puff, allowing observation of the dynamics of the anterior and posterior corneal surfaces as well as the anterior lens surface. The dynamics of the measurement are driven by the biomechanical properties of the human eye as well as its intraocular pressure. Thus, the analysis of the M-scan may provide useful information about the biomechanical behavior of the anterior segment during the applanation caused by the air puff. An initial set of controlled clinical experiments are shown to comprehend the performance of the instrument and its potential applicability to further understand the eye biomechanics and intraocular pressure measurements. Limitations and possibilities of the new apparatus are discussed.

How can soil monitoring networks be used to improve predictions of organic carbon pool dynamics and CO2 fluxes in agricultural soils?

Abstract As regional and continental carbon balances of terrestrial ecosystems become available, it becomes clear that the soils are the largest source of uncertainty. Repeated inventories of soil organic carbon (SOC) organized in soil monitoring networks (SMN) are being implemented in a number of countries. This paper reviews the concepts and design of SMNs in ten countries, and discusses the contribution of such networks to reducing the uncertainty of soil carbon balances. Some SMNs are designed to estimate country-specific land use or management effects on SOC stocks, while others collect soil carbon and ancillary data to provide a nationally consistent assessment of soil carbon condition across the major land-use/soil type combinations. The former use a single sampling campaign of paired sites, while for the latter both systematic (usually grid based) and stratified repeated sampling campaigns (5–10 years interval) are used with densities of one site per 10–1,040 km². For paired sites, multiple samples at each site are taken in order to allow statistical analysis, while for the single sites, composite samples are taken. In both cases, fixed depth increments together with samples for bulk density and stone content are recommended. Samples should be archived to allow for re-measurement purposes using updated techniques. Information on land management, and where possible, land use history should be systematically recorded for each site. A case study of the agricultural frontier in Brazil is presented in which land use effect factors are calculated in order to quantify the CO2 fluxes from national land use/management conversion matrices. Process-based SOC models can be run for the individual points of the SMN, provided detailed land management records are available. These studies are still rare, as most SMNs have been implemented recently or are in progress. Examples from the USA and Belgium show that uncertainties in SOC change range from 1.6–6.5 Mg C ha−1 for the prediction of SOC stock changes on individual sites to 11.72 Mg C ha−1 or 34% of the median SOC change for soil/land use/climate units. For national SOC monitoring, stratified sampling sites appears to be the most straightforward attribution of SOC values to units with similar soil/land use/climate conditions (i.e. a spatially implicit upscaling approach). Keywords Soil monitoring networks - Soil organic carbon - Modeling - Sampling design

The link between belongingness and depressive symptoms: An exploration in the workplace interpersonal context

Interpersonal factors are crucial to a deepened understanding of depression. Belongingness, also referred to as connectedness, has been established as a strong risk/protective factor for depressive symptoms. To elucidate this link it may be beneficial to investigate the relative importance of specific psychosocial contexts as belongingness foci. Here we investigate the construct of workplace belongingness. Employees at a disability services organisation (N = 125) completed measures of depressive symptoms, anxiety symptoms, workplace belongingness and organisational commitment. Psychometric analyses, including Horn's parallel analyses, indicate that workplace belongingness is a unitary, robust and measurable construct. Correlational data indicate a substantial relationship with depressive symptoms (r = −.54) and anxiety symptoms (r = −.39). The difference between these correlations was statistically significant, supporting the particular importance of belongingness cognitions to the etiology of depression. Multiple regression analyses support the hypothesis that workplace belongingness mediates the relationship between affective organisational commitment and depressive symptoms. It is likely that workplaces have the potential to foster environments that are intrinsically less depressogenic by facilitating workplace belongingness. From a clinical perspective, cognitions regarding the workplace psychosocial context appear to be highly salient to individual psychological health, and hence warrant substantial attention.