Lake sediment research as a part of lake management - case studies and implications from southern Finland

In Finland one of the most important current issues in the environmental management is the quality of surface waters. The increasing social importance of lakes and water systems has generated wide-ranging interest in lake restoration and management, concerning especially lakes suffering from eutrophication, but also from other environmental impacts. Most of the factors deteriorating the water quality in Finnish lakes are connected to human activities. Especially since the 1940's, the intensified farming practices and conduction of sewage waters from scattered settlements, cottages and industry have affected the lakes, which simultaneously have developed in to recreational areas for a growing number of people. Therefore, this study was focused on small lakes, which are human impacted, located close to settlement areas and have a significant value for local population. The aim of this thesis was to obtain information from lake sediment records for on-going lake restoration activities and to prove that a well planned, properly focused lake sediment study is an essential part of the work related to evaluation, target consideration and restoration of Finnish lakes. Altogether 11 lakes were studied. The study of Lake Kaljasjärvi was related to the gradual eutrophication of the lake. In lakes Ormajärvi, Suolijärvi, Lehee, Pyhäjärvi and Iso-Roine the main focus was on sediment mapping, as well as on the long term changes of the sedimentation, which were compared to Lake Pääjärvi. In Lake Hormajärvi the role of different kind of sedimentation environments in the eutrophication development of the lake's two basins were compared. Lake Orijärvi has not been eutrophied, but the ore exploitation and related acid main drainage from the catchment area have influenced the lake drastically and the changes caused by metal load were investigated. The twin lakes Etujärvi and Takajärvi are slightly eutrophied, but also suffer problems associated with the erosion of the substantial peat accumulations covering the fringe areas of the lakes. These peat accumulations are related to Holocene water level changes, which were investigated. The methods used were chosen case-specifically for each lake. In general, acoustic soundings of the lakes, detailed description of the nature of the sediment and determinations of the physical properties of the sediment, such as water content, loss on ignition and magnetic susceptibility were used, as was grain size analysis. A wide set of chemical analyses was also used. Diatom and chrysophycean cyst analyses were applied, and the diatom inferred total phosphorus content was reconstructed. The results of these studies prove, that the ideal lake sediment study, as a part of a lake management project, should be two-phased. In the first phase, thoroughgoing mapping of sedimentation patterns should be carried out by soundings and adequate corings. The actual sampling, based on the preliminary results, must include at least one long core from the main sedimentation basin for the determining the natural background state of the lake. The recent, artificially impacted development of the lake can then be determined by short-core and surface sediment studies. The sampling must be focused on the basis of the sediment mapping again, and it should represent all different sedimentation environments and bottom dynamic zones, considering the inlets and outlets, as well as the effects of possible point loaders of the lake. In practice, the budget of the lake management projects of is usually limited and only the most essential work and analyses can be carried out. The set of chemical and biological analyses and dating methods must therefore been thoroughly considered and adapted to the specific management problem. The results show also, that information obtained from a properly performed sediment study enhances the planning of the restoration, makes possible to define the target of the remediation activities and improves the cost-efficiency of the project.

Substance flow analysis in Finland : Four case studies on N and P flows

Nitrogen (N) and phosphorus (P) are essential elements for all living organisms. However, in excess, they contribute to several environmental problems such as aquatic and terrestrial eutrophication. Globally, human action has multiplied the volume of N and P cycling since the onset of industrialization. The multiplication is a result of intensified agriculture, increased energy consumption and population growth. Industrial ecology (IE) is a discipline, in which human interaction with the ecosystems is investigated using a systems analytical approach. The main idea behind IE is that industrial systems resemble ecosystems, and, like them, industrial systems can then be described using material, energy and information flows and stocks. Industrial systems are dependent on the resources provided by the biosphere, and these two cannot be separated from each other. When studying substance flows, the aims of the research from the viewpoint of IE can be, for instance, to elucidate the ways how the cycles of a certain substance could be more closed and how the flows of a certain substance could be decreased per unit of production (= dematerialization). In Finland, N and P are studied widely in different ecosystems and environmental emissions. A holistic picture comparing different societal systems is, however, lacking. In this thesis, flows of N and P were examined in Finland using substance flow analysis (SFA) in the following four subsystems: I) forest industry and use of wood fuels, II) food production and consumption, III) energy, and IV) municipal waste. A detailed analysis at the end of the 1990s was performed. Furthermore, historical development of the N and P flows was investigated in the energy system (III) and the municipal waste system (IV). The main research sources were official statistics, literature, monitoring data, and expert knowledge. The aim was to identify and quantify the main flows of N and P in Finland in the four subsystems studied. Furthermore, the aim was to elucidate whether the nutrient systems are cyclic or linear, and to identify how these systems could be more efficient in the use and cycling of N and P. A final aim was to discuss how this type of an analysis can be used to support decision-making on environmental problems and solutions. Of the four subsystems, the food production and consumption system and the energy system created the largest N flows in Finland. For the creation of P flows, the food production and consumption system (Paper II) was clearly the largest, followed by the forest industry and use of wood fuels and the energy system. The contribution of Finland to N and P flows on a global scale is low, but when compared on a per capita basis, we are one of the largest producers of these flows, with relatively high energy and meat consumption being the main reasons. Analysis revealed the openness of all four systems. The openness is due to the high degree of internationality of the Finnish markets, the large-scale use of synthetic fertilizers and energy resources and the low recycling rate of many waste fractions. Reduction in the use of fuels and synthetic fertilizers, reorganization of the structure of energy production, reduced human intake of nutrients and technological development are crucial in diminishing the N and P flows. To enhance nutrient recycling and replace inorganic fertilizers, recycling of such wastes as wood ash and sludge could be promoted. SFA is not usually sufficiently detailed to allow specific recommendations for decision-making to be made, but it does yield useful information about the relative magnitude of the flows and may reveal unexpected losses. Sustainable development is a widely accepted target for all human action. SFA is one method that can help to analyse how effective different efforts are in leading to a more sustainable society. SFA's strength is that it allows a holistic picture of different natural and societal systems to be drawn. Furthermore, when the environmental impact of a certain flow is known, the method can be used to prioritize environmental policy efforts.

Future-proofed energy design for dwellings: Case studies from England and application to the Code for Sustainable Homes

This paper investigates 'future-proofing' as an unexplored yet all-important aspect in the design of low-energy dwellings. It refers particularly to adopting lifecycle thinking and accommodating risks and uncertainties in the selection of fabric energy efficiency measures and low or zero-carbon technologies. Based on a conceptual framework for future-proofed design, the paper first presents results from the analysis of two 'best practice' housing developments in England; i.e., North West Cambridge in Cambridge and West Carclaze and Baal in St. Austell, Cornwall. Second, it examines the 'Energy and CO2 Emissions' part of the Code for Sustainable Homes to reveal which design criteria and assessment methods can be practically integrated into this established building certification scheme so that it can become more dynamic and future-oriented.Practical application: Future-proofed construction is promoted implicitly within the increasingly stringent building regulations; however, there is no comprehensive method to readily incorporate futures thinking into the energy design of buildings. This study has a three-fold objective of relevance to the building industry:Illuminating the two key categories of long-term impacts in buildings, which are often erroneously treated interchangeably:- The environmental impact of buildings due to their long lifecycles.- The environment's impacts on buildings due to risks and uncertainties affecting the energy consumption by at least 2050. This refers to social, technological, economic, environmental and regulatory (predictable or unknown) trends and drivers of change, such as climate uncertainty, home-working, technology readiness etc.Encouraging future-proofing from an early planning stage to reduce the likelihood of a prematurely obsolete building design.Enhancing established building energy assessment methods (certification, modelling or audit tools) by integrating a set of future-oriented criteria into their methodologies. © 2012 The Chartered Institution of Building Services Engineers.

Investigation of lactic acid bacteria mediated bioprotection with applications in cereal industry. Case-study: malting process

Antifungal compounds produced by Lactic acid bacteria (LAB) metabolites can be natural and reliable alternative for reducing fungal infections pre- and post-harvest with a multitude of additional advantages for cereal-base products. Toxigenic and spoilage fungi are responsible for numerous diseases and economic losses. This thesis includes an overview of the impact fungi have on aspects of the cereal food chain. The applicability of LAB in plant protection and cereal industry is discussed in detail. Specific case studies include Fusarium head blight, and the impact of fungi in the malting and baking industry. The impact of Fusarium culmorum infected raw barley on the final malt quality was part of the investigation. In vitro infected barley grains were fully characterized. The study showed that the germinative energy of infected barley grains decreased by 45% and grains accumulated 199 μg.kg-1 of deoxynivalenol (DON). Barley grains were subsequently malted and fully characterized. Fungal biomass increased during all stages of malting. Infected malt accumulated 8-times its DON concentration during malting. Infected malt grains revealed extreme structural changes due to proteolytic, (hemi)-cellulolytic and starch degrading activity of the fungi, this led to increased friability and fragmentation. Infected grains also had higher protease and β-glucanase activities, lower amylase activity, a greater proportion of free amino and soluble nitrogen, and a lower β-glucan content. Malt loss was over 27% higher in infected malt when compared to the control. The protein compositional changes and respective enzymatic activity of infected barley and respective malt were characterized using a wide range of methods. F. culmorum infected barley grains showed an increase in proteolytic activity and protein extractability. Several metabolic proteins decreased and increased at different rates during infection and malting, showing a complex F. culmorum infection interdependence. In vitro F. culmorum infected malt was used to produce lager beer to investigate changes caused by the fungi during the brewing processes and their effect on beer quality attributes. It was found, that the wort containing infected malt had a lower pH, a higher FAN, higher β-glucan and a 45% increase in the purging rate, and led to premature yeast flocculation. The beer produced with infected malt (IB) had also a significantly different amino acid profile. IB flavour characterization revealed a higher concentration of esters, fusel alcohols, fatty acids, ketones, and dimethylsulfide, and in particular, acetaldehyde, when compared to the control. IB had a greater proportion of Strecker aldehydes and Maillard products contributing to an increased beer staling character. IB resulted in a 67% darker colour with a trend to better foam stability. It was also found that 78% of the accumulated mycotoxin deoxynivalenol in the malt was transferred into beer. A LAB cell-freesupernatant (cfs), produced in wort-base substrate, was investigated for its ability to inhibit Fusarium growth during malting. Wort was a suitable substrate for LAB exhibiting antifungal activity. Lactobacillus amylovorus DSM19280 inhibited 104 spores.mL-1 for 7 days, after 120 h of fermentation, while Lactobacillus reuteri R29 inhibited 105 spores.mL-1 for 7 days, after 48 h of fermentation. Both LAB cfs had significant different organic acid profiles. Acid-base antifungal compounds were identified and, phenyllactic, hydroxy-phenyllactic, and benzoic acids were present in higher concentrations when compared to the control. A 3 °P wort substrate inoculated With L. reuteri R29 (cfs) was applied in malting and successfully inhibited Fusarium growth by 23%, and mycotoxin DON by 80%. Malt attributes resulted in highly modified grains, lower pH, higher colouration, and higher extract yield. The implementation of selected LAB producing antifungal compounds can be used successfully in the malting process to reduce mould growth and mycotoxin production.

Caregivers of people with neurodegenerative diseases: profile and unmet needs from a population-based survey in South Australia.

INTRODUCTION: Neurodegenerative diseases (NDD) are characterized by progressive decline and loss of function, requiring considerable third-party care. NDD carers report low quality of life and high caregiver burden. Despite this, little information is available about the unmet needs of NDD caregivers. METHODS: Data from a cross-sectional, whole of population study conducted in South Australia were analyzed to determine the profile and unmet care needs of people who identify as having provided care for a person who died an expected death from NDDs including motor neurone disease and multiple sclerosis. Bivariate analyses using chi(2) were complemented with a regression analysis. RESULTS: Two hundred and thirty respondents had a person close to them die from an NDD in the 5 years before responding. NDD caregivers were more likely to have provided care for more than 2 years and were more able to move on after the death than caregivers of people with other disorders such as cancer. The NDD caregivers accessed palliative care services at the same rate as other caregivers at the end of life, however people with an NDD were almost twice as likely to die in the community (odds ratio [OR] 1.97; 95% confidence interval [CI] 1.30 to 3.01) controlling for relevant caregiver factors. NDD caregivers reported significantly more unmet needs in emotional, spiritual, and bereavement support. CONCLUSION: This study is the first step in better understanding across the whole population the consequences of an expected death from an NDD. Assessments need to occur while in the role of caregiver and in the subsequent bereavement phase.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Innovation and adaptation in the Ontario grape and wine industry: An integrated, transdisciplinary response to climate change

With scientific consensus supporting a 4oC increase in global mean temperature over the next century and increased frequency of severe weather events, adaptation to climate change is critical. Given the dynamic and complex nature of climate change, a transdisciplinary approach toward adaptation can create an environment that supports knowledge sharing and innovation, improving existing strategies and creating new ones. The Ontario wine industry provides a case study to illustrate the benefits of this approach. We describe the formation and work of the Ontario Grape and Wine Research Network within this context, and present some preliminary results to highlight the opportunities for innovation that will drive the successful adaption of the Ontario grape and wine industry.

Mainstreaming ESL : case studies in integrating ESL students into the mainstream curriculum.

Se recogen varios estudios de profesionales de las escuelas primarias y secundarias del Reino Unido, Estados Unidos,Canadá y Australia que describen sus experiencias docentes en la integración con éxito en las aulas regulares de niños con inglés como segundo idioma (ESL).

The Ethics of Ethics Reviews in Global Health Research: Case Studies Applying a New Paradigm

With increasing calls for global health research there is growing concern regarding the ethical challenges encountered by researchers from high-income countries (HICs) working in low or middle-income countries (LMICs). There is a dearth of literature on how to address these challenges in practice. In this article, we conduct a critical analysis of three case studies of research conducted in LMICs.We apply emerging ethical guidelines and principles specific to global health research and offer practical strategies that researchers ought to consider. We present case studies in which Canadian health professional students conducted a health promotion project in a community in Honduras; a research capacity-building program in South Africa, in which Canadian students also worked alongside LMIC partners; and a community-university partnered research capacity-building program in which Ecuadorean graduate students, some working alongside Canadian students, conducted community-based health research projects in Ecuadorean communities.We examine each case, identifying ethical issues that emerged and how new ethical paradigms being promoted could be concretely applied.We conclude that research ethics boards should focus not only on protecting individual integrity and human dignity in health studies but also on beneficence and non-maleficence at the community level, explicitly considering social justice issues and local capacity-building imperatives.We conclude that researchers from HICs interested in global health research must work with LMIC partners to implement collaborative processes for assuring ethical research that respects local knowledge, cultural factors, the social determination of health, community participation and partnership, and making social accountability a paramount concern.

The Ethics of Ethics Reviews in Global Health Research: Case Studies Applying a New Paradigm

With increasing calls for global health research there is growing concern regarding the ethical challenges encountered by researchers from high-income countries (HICs) working in low or middle-income countries (LMICs). There is a dearth of literature on how to address these challenges in practice. In this article, we conduct a critical analysis of three case studies of research conducted in LMICs.We apply emerging ethical guidelines and principles specific to global health research and offer practical strategies that researchers ought to consider. We present case studies in which Canadian health professional students conducted a health promotion project in a community in Honduras; a research capacity-building program in South Africa, in which Canadian students also worked alongside LMIC partners; and a community-university partnered research capacity-building program in which Ecuadorean graduate students, some working alongside Canadian students, conducted community-based health research projects in Ecuadorean communities.We examine each case, identifying ethical issues that emerged and how new ethical paradigms being promoted could be concretely applied.We conclude that research ethics boards should focus not only on protecting individual integrity and human dignity in health studies but also on beneficence and non-maleficence at the community level, explicitly considering social justice issues and local capacity-building imperatives.We conclude that researchers from HICs interested in global health research must work with LMIC partners to implement collaborative processes for assuring ethical research that respects local knowledge, cultural factors, the social determination of health, community participation and partnership, and making social accountability a paramount concern.

Quality of tender documents: case studies from the UK

Tendering is one of the stages in construction procurement that requires extensive information and documents exchange. However, tender documents are not always clear in practice. The aim of this study was to ascertain the clarity and adequacy of tender documents used in practice. Access was negotiated into two UK construction firms and the whole tender process for two projects was shadowed for 6-7 weeks in each firm using an ethnographic approach. A significant amount of tender queries, amendments and addenda were recorded. This showed that quality of tender documentation is still a problem in construction despite the existence of standards like Co-ordinated Project Information (1987) and British Standard 1192 (1984 and 1990) that are meant to help in producing clear and consistent project information. Poor quality tender documents are a source of inaccurate estimates, claims and disputes on contracts. Six recommendations are presented to help in improving the quality of tender documentation. Further research is needed into the recommendations to help improve the quality of tender documents, perhaps in conjunction with an industry-wide investigation into the level of incorporation of CPI principles in practice.

Case studies in interannual to decadal climate predictability

The predictability of ocean and climate variables is investigated, using a perfect model-based case study approach that recognises that predictability is dependent on the initial climate state. In line with previous studies, large scale ocean variables, show predictability for several years or more; by contrast, the predictability of climate variables is generally limited to, 2 years at most. That predictability shows high sensitivity to the initial state is demonstrated by predictable climate signals, arising in different regions, variables and seasons for different initial conditions. The predictability of climate variables, in the second year is of particular interest, because this is beyond the timescale that is usually considered to be the limit, of seasonal predictability. For different initial conditions, second year predictability is found in: temperatures in southeastern, North America (winter) and western Europe (winter and summer), and precipitation in India (summer monsoon) and in the tropical, South Atlantic. Second year predictability arises either from persistence of large-scale sea surface temperature (SST) and, related ocean heat content anomalies, particularly in regions such as the North Atlantic and Southern Ocean, or from mechanisms, that involve El Nino Southern Oscillation (ENSO) dynamics.

Developing government policies for distance education: lessons learnt from two Sri Lankan case studies

Education, especially higher education, is considered vital for maintaining national and individual competitiveness in the global knowledge economy. Following the introduction of its “Free Education Policy” as early as 1947, Sri Lanka is now the best performer in basic education in the South Asian region, with a remarkable record in terms of high literacy rates and the achievement of universal primary education. However, access to tertiary education is a bottleneck, due to an acute shortage of university places. In an attempt to address this problem, the government of Sri Lanka has invested heavily in information and communications technologies (ICTs) for distance education. Although this has resulted in some improvement, the authors of this article identify several barriers which are still impeding successful participation for the majority of Sri Lankans wanting to study at tertiary level. These impediments include the lack of infrastructure/resources, low English language proficiency, weak digital literacy, poor quality of materials and insufficient provision of student support. In the hope that future implementations of ICT-enabled education programmes can avoid repeating the mistakes identified by their research in this Sri Lankan case, the authors conclude their paper with a list of suggested policy options.

Science for Humanitarian Emergencies and Resilience (SHEAR) scoping study: Annex 3 - Early warning system and risk assessment case studies

This report provides case studies of Early Warning Systems (EWSs) and risk assessments encompassing three main hazard types: drought; flood and cyclone. The case studies are taken from ten countries across three continents (focusing on Africa, South Asia and the Caribbean). The case studies have been developed to assist the UK Department for International Development (DFID) to prioritise areas for Early Warning System (EWS) related research under their ‘Science for Humanitarian Emergencies and Resilience’ (SHEAR) programme. The aim of these case studies is to ensure that DFID SHEAR research is informed by the views of Non-Governmental Organisations (NGOs) and communities engaged with Early Warning Systems and risk assessments (including community-based Early Warning Systems). The case studies highlight a number of challenges facing Early Warning Systems (EWSs). These challenges relate to financing; integration; responsibilities; community interpretation; politics; dissemination; accuracy; capacity and focus. The case studies summarise a number of priority areas for EWS related research: • Priority 1: Contextualising and localising early warning information • Priority 2: Climate proofing current EWSs • Priority 3: How best to sustain effective EWSs between hazard events? • Priority 4: Optimising the dissemination of risk and warning information • Priority 5: Governance and financing of EWSs • Priority 6: How to support EWSs under challenging circumstances • Priority 7: Improving EWSs through monitoring and evaluating the impact and effectiveness of those systems