The response of reworked aerosols to climate through estimation of inter-particle forces

This paper describes the first use of inter-particle force measurement in reworked aerosols to better understand the mechanics of dust deflation and its consequent ecological ramifications. Dust is likely to carry hydrocarbons and micro-organisms including human pathogens and cultured microbes and thereby is a threat to plants, animals and human. Present-day global aerosol emissions are substantially greater than in 1850; however, the projected influx rates are highly disputable. This uncertainty, in part, has roots in the lack of understanding of deflation mechanisms. A growing body of literature shows that whether carbon emission continues to increase, plant transpiration drops and soil water retention enhances, allowing more greenery to grow and less dust to flux. On the other hand, a small but important body of geochemistry literature shows that increasing emission and global temperature leads to extreme climates, decalcification of surface soils containing soluble carbonate polymorphs and hence a greater chance of deflation. The consistency of loosely packed reworked silt provides background data against which the resistance of dust’s bonding components (carbonates and water) can be compared. The use of macro-scale phenomenological approaches to measure dust consistency is trivial. Instead, consistency can be measured in terms of inter-particle stress state. This paper describes a semi-empirical parametrisation of the inter-particle cohesion forces in terms of the balance of contact-level forces at the instant of particle motion. We put forward the hypothesis that the loss of Ca2+-based pedogenic salts is responsible for much of the dust influx and surficial drying pays a less significant role.

Compostagem e caracterização de resíduos vegetais para utilização como substratos hortícolas

O objectivo deste trabalho foi estudar a utilização de 5 compostos de resíduos de origem vegetal, como componentes de substratos hortícolas. Estudaram-se os processos de compostagem de bagaço de azeitona, bagaço de uva, polpa de alfarroba, casca de eucalipto e casca de pinheiro, caracterizaram-se os compostos obtidos e testou-se a sua aptidão agronómica, como substratos para viveiro de tomate (Lycopersicum esculentum Mill.) em placas alveoladas e cultura de pelargónio (Pelargonium x hortorum) em vaso. Após uma preparação prévia, que em alguns dos resíduos vegetais constou de moenda, suplemento de azoto e aumento do teor de humidade, efectuou-se a sua compostagem em caixas com 1200 L de capacidade, isoladas termicamente, com arejamento por volteio manual. Depois foram analisadas as suas características físicas e químicas e testados na sua aptidão como constituintes únicos de substratos e em misturas com turfa de sphagnum. A maioria dos processos de compostagem apresentou uma evolução habitual da temperatura, com a máxima aproximando-se ou ultrapassando 60 oC. Como excepções, verificou-se um período de compostagem muito longo em bagaço de azeitona; o atraso da fase termofílica em polpa de alfarroba e, na 1ª compostagem de casca de pinheiro, a temperatura não alcançou a zona termofílica. A maioria dos resíduos manifestaram uma acentuada resistência à degradação durante a compostagem, à excepção da polpa de alfarroba e da casca de eucalipto. Contudo, a nível físico-químico e químico registaram-se evoluções acentuadas, sobretudo nas variáveis relacionadas com alterações da superfície das partículas, como por exemplo, a capacidade de troca catiónica. Outras variáveis apresentaram uma evolução interessante para o acompanhamento do processo e o conhecimento do grau de estabilidade do composto final. Foi apreciável o efeito proporcionado pela adição de lamas de estação de tratamento de águas residuais urbanas, como suplemento azotado, a nível das propriedades físicas dos compostos, do aumento da velocidade do processo de compostagem e do enriquecimento dos compostos em macro e micronutrientes. A compostagem não conduziu à melhoria significativa das propriedades físicas dos materiais, excepto em casca de eucalipto. Os compostos caracterizaram-se fundamentalmente por uma reduzida capacidade de retenção de água e uma elevada capacidade de arejamento. Os compostos obtidos com incorporação de lamas apresentaram os valores mais baixos de capacidade de arejamento, mesmo assim dentro dos limites satisfatórios e, os valores mais altos de capacidade de retenção de água. Na cultura em placas alveoladas, o comportamento de muitas das misturas com compostos não se diferenciou do da testemunha, observando-se uma flutuação sazonal do comportamento das misturas nos dois viveiros de cada ano, associada às condições ambientais mais exigentes do ponto de vista da disponibilidade de água. Observou-se um maior número de correlações significativas entre as características dos substratos e as variáveis relativas ao crescimento das plantas nos viveiros efectuados mais tarde, sob condições de maior evapotranspiração. As plantas obtidas no segundo viveiro de tomate foram instaladas em cultura. As características das plantas do viveiro, apresentaram elevada correlação com as respectivas produções obtidas no campo, evidenciando a importância da qualidade das plantas de viveiro, na produção. Nos ensaios de pelargónio em vaso, também se observaram comportamentos idênticos ao da testemunha em muitas das misturas com compostos. Observou-se no 2º ensaio, um maior número de tratamentos com resultados idênticos aos da testemunha, resultante das condições de menor exigência hídrica, as quais fizeram sobressair menos as diferenças de propriedades físicas das misturas. Contudo, a diferença de crescimento obtido em algumas misturas, atribuiu-se também à interferência da continuidade capilar entre o vaso de papel com a estaca enraizada e a mistura em estudo. O trabalho presente mostrou que é possível obter compostos a partir de resíduos orgânicos, com boas características e a preço competitivo para utilização como substratos hortícolas. O processo de compostagem sendo um elemento chave, é fácil de controlar se houver uma regulação eficaz do arejamento e do teor de humidade durante o processo. Apesar de alguns resíduos, como a polpa de alfarroba, serem caros, se tomarmos em consideração o custo da sua eliminação, poderão conduzir a substratos comercialmente viáveis. Em condições ambientais que favoreçam uma maior evapotranspiração ou, em culturas com maior exigência hídrica, pode ser aconselhável a mistura dos compostos estudados com turfa de sphagnum pouco decomposta para melhorar a capacidade de retenção de água.

Forest soil short term response to prescribed fire: an approach by Principal Components Analysis

In the current context of serious climate changes, where the increase of the frequency of some extreme events occurrence can enhance the rate of periods prone to high intensity forest fires, the National Forest Authority often implements, in several Portuguese forest areas, a regular set of measures in order to control the amount of fuel mass availability (PNDFCI, 2008). In the present work we’ll present a preliminary analysis concerning the assessment of the consequences given by the implementation of prescribed fire measures to control the amount of fuel mass in soil recovery, in particular in terms of its water retention capacity, its organic matter content, pH and content of iron. This work is included in a larger study (Meira-Castro, 2009(a); Meira-Castro, 2009(b)). According to the established praxis on the data collection, embodied in multidimensional matrices of n columns (variables in analysis) by p lines (sampled areas at different depths), and also considering the quantitative data nature present in this study, we’ve chosen a methodological approach that considers the multivariate statistical analysis, in particular, the Principal Component Analysis (PCA ) (Góis, 2004). The experiments were carried out in a soil cover over a natural site of Andaluzitic schist, in Gramelas, Caminha, NW Portugal, who was able to maintain itself intact from prescribed burnings from four years and was submit to prescribed fire in March 2008. The soils samples were collected from five different plots at six different time periods. The methodological option that was adopted have allowed us to identify the most relevant relational structures inside the n variables, the p samples and in two sets at the same time (Garcia-Pereira, 1990). Consequently, and in addition to the traditional outputs produced from the PCA, we have analyzed the influence of both sampling depths and geomorphological environments in the behavior of all variables involved.

Biochemical and Storage Characteristics of Myofibrillar Protein ( Surimi ) from Freshwater Major Carps

School of Industrial Fisheries, Cochin University of Science and Technology

Macrophyte community structure and species occurrence in relation to environmental determinants in the ephemeral aquatic habitats of Gavdos, Greece

The aims of this study were to explore the environmental factors that determine the distribution of plant communities in temporary rock pools and provide a quantitative analysis of vegetation-environment relationships for five study sites on the island of Gavdos, southwest of Crete, Greece. Data from 99 rock pools were collected and analysed using Two-Way Indicator Species Analysis (TWINSPAN), Detrended Correspondence Analysis (DCA) and Canonical Correspondence Analysis (CCA) to identify the principal communities and environmental gradients that are linked to community distribution. A total of 46 species belonging to 21 families were recorded within the study area. The dominant families were Labiatae, Gramineae and Compositae while therophytes and chamaephytes were the most frequent life forms. The samples were classified into six community types using TWINSPAN, which were also corroborated by CCA analysis. The principal gradients for vegetation distribution, identified by CCA, were associated with water storage and water retention ability, as expressed by pool perimeter and water depth. Generalised Additive Models (GAMs) were employed to identify responses of four dominant rock pool species to water depth. The resulting species response curves showed niche differentiation in the cases of Callitriche pulchra and Tillaea vaillantii and revealed competition between Zannichellia pedunculata and Chara vulgaris. The use of classification in combination with ordination techniques resulted in a good discrimination between plant communities. Generalised Additive Models are a powerful tool in investigating species response curves to environmental gradients. The methodology adopted can be employed for improving baseline information on plant community ecology and distribution in Mediterranean ephemeral pools.

Assessment of the quality of cottage cheese produced from standard and protein-fortified skim milk

The effects of milk protein fortification on the texture and microstructure of cottage cheese curd were evaluated. Protein powder (92.6% protein) was added to the skim milk at a level of 0.4% (w/w) to produce curds. Control curds with no protein powder addition were also produced. These curds were analysed for differences in yield, total solids, curd size, texture and structure. It was found that the addition of protein powder contributed to a significant yield increase, which can be attributed to increased water retention, with better curd size distribution. Control curds were firmer than the fortified curds and the structure showed less open-pore structure as revealed by electron microscopy. However, the addition of dressing masked the textural differences, and a sensory panel was unable to distinguish between cheeses produced from fortified milk and controls.

Effect of drainage and wildfire on peat hydrophysical properties

Consecutive multiple disturbances to northern peatlands can dramatically impact peat hydrophysical properties. We examine the impact of a double disturbance (drainage and wildfire) on the hydrophysical and moisture retention properties of peat, a key regulator of peatland ecohydrological resilience, and compare this with the impact to each individual disturbance (drainage and wildfire). The compound effect of drainage and wildfire resulted in a shift of the surface datum down the peat profile, revealing denser peat. Less-dense near-surface peats that regulate water-table position and near-surface moisture content, both favourable to Sphagnum recolonization, were lost. At a drained peatland that was then subject to wildfire, peat bulk density increased by 14.1%, von Post humification class increased by two categories and water retention increased by 15.6%, compared with an adjacent burned but undrained (single disturbance) portion of the fen. We discuss the key hydrophysical metrics of peatland vulnerability and outline how they are affected by the isolated impacts of drainage and wildfire, as well as their combined effects. We demonstrate that multiple peatland disturbances have likely led to an increase in hydrological limitations to Sphagnum recovery, which may impact peatland ecohydrological resilience.

Reduction of oil uptake in deep fat fried chicken nuggets using edible coatings based on cassava starch and methylcellulose

The aim of this study was to evaluate the effect of edible coatings based on methylcellulose (MC) and cassava starch (CS) to reduce oil uptake and improve water retention of chicken nuggets during deep fat frying. Edible coatings were prepared with I g of MC/100 g solution and 4 g of CS/100 g solution, with 25 or 55 g glycerol/100 g biopolymer. These solutions were applied to nugget samples before battering. Pre-fried and fried nuggets were analyzed to determine lipid and water contents. Color and texture were also measured in the fried nuggets. In general, there was no effect of the two concentrations of plasticizer of either of the biopolymers on the water retention of whole nuggets. But, higher oil uptake reduction, and consequently, lower lipid content was observed on nuggets coated with CS and 25% plasticizer. The coated samples were darker and had a brighter yellow color when compared with the control. There was also a significant decrease in the shearing force of the fried coated samples, indicating reduced hardness of these samples.

Occurrence of wide-band tracheids in Cactaceae: wood variation during Pilosocereus auriasetus development

Studies of wide-band tracheids (WBTs) have aroused the interest of researchers who have searched to understand their origin, function, and phylogenetic implications. The present research has the objective of studying the distribution of WBTs, together with anatomic aspects of vegetative organs in different stages of Pilosocereus aurisetus, in order to understand the occurrence of WBTs in columnar cacti. Transverse and longitudinal sections of the stem (apex, middle, and base) and the root were made. The epidermis was present in the photosynthetic stem, but was substituted by periderm which was already well established in the root. The differentiation of the cortex is visible in the middle of the stem, becoming homogeneous in the base. WBTs were observed in the base and middle of young stems (WBT monomorphic wood); common in stems of globular cacti. However, WBTs/ fibrous dimorphic wood was observed in the base of adult stems, a result of the cambial activity producing vessel elements and fibers. This wood polymorphism of the Cactaceae can be interpreted as cambial variation, a common character of Caryophyllales. Due to the small size of the plant, the presence of WBTs in the young stem may be related to water retention necessary for its development, rather than to physical support of the plant.

Limnology and culture-based fisheries in non-perennial reservoirs in Sri Lanka

This study was carried out to investigate the possibility of using the limnological characteristics of non-perennial reservoirs in Sri Lanka for the future management of culture-based fisheries. Forty-five reservoirs were randomly selected to study their limnology, out of which 32 were stocked with fish fingerlings of Chinese and Indian carps, tilapia and freshwater prawn at stocking densities ranging from 218–4372 fingerlings ha−1. Of these, 23 reservoirs were harvested at the end of the culture period (6–10 months). Thirteen limnological parameters were measured during the water retention period of each of the 45 reservoirs between November 2001 and January 2004. The mean values of the limnological parameters were used to ordinate the reservoirs through principal component analysis. Ordination showed a productivity gradient among reservoirs where Secchi disc depth, total phosphorus, chlorophyll-a, inorganic turbidity and organic turbidity were identified as key factors. The total fish yield of culture-based fisheries was positively correlated to the scores of the first principal component axis. This study reveals that it is possible to classify non-perennial reservoirs in Sri Lanka based on the above limnological parameters in order to develop culture-based fisheries and that they could be applicable in comparable water bodies elsewhere in the tropics.

Culture-based fisheries in non-perennial reservoirs in Sri Lanka: production and relative performance of stocked species

In Sri Lanka, there is a great potential for the development of culture-based fisheries because of the availability of around 12 000 non-perennial reservoirs in the dry zone (<187 cm annual rainfall) of the island. These reservoirs fill during the north-east monsoonal period in October to December and almost completely dry up during August to October. As these non-perennial reservoirs are highly productive, hatchery-reared fish fingerlings can be stocked to develop culture-based fisheries during the water retention period of 7–9 months. The present study was conducted in 32 non-perennial reservoirs in five administrative districts in Sri Lanka. These reservoirs were stocked with fingerlings of Indian (catla Catla catla Hamilton and rohu Labeo rohita Hamilton) and Chinese (bighead carp Aristichthys nobilis Richardson) major carps, common carp Cyprinus carpio L., genetically improved farmed tilapia (GIFT) strain of Nile tilapia, Oreochromis niloticus (L.) and post-larvae of giant freshwater prawn, Macrobrachium rosenbergii De Man, at three different species combinations and overall stocking densities (SD) ranging from 218 to 3902 fingerlings ha⁻¹, during the 2002–2003 culture cycle. Of the 32 reservoirs stocked, reliable data on harvest were obtained from 25 reservoirs. Fish yield ranged from 53 to 1801 kg ha⁻¹ and the yields of non-perennial reservoirs in southern region were significantly (P < 0.05) higher than those in the northern region. Naturally-recruited snakehead species contributed the catches in northern reservoirs. Fish yield was curvilinearly related to reservoir area (P < 0.05), and a negative second order relationship was evident between SD and yield (P < 0.05). Chlorophyll-a and fish yield exhibited a positive second order relationship (P < 0.01). Bighead carp yield impacted positively on the total yield (P < 0.05), whereas snakehead yield impact was negative. Bighead carp, common carp and rohu appear suitable for poly-culture in non-perennial reservoirs. GIFT strain O. niloticus had the lowest specific growth rate among stocked species and freshwater prawn had a low return.

Hydrogel properties of electrospun polyvinylpyrrolidone and polyvinylpyrrolidone/poly(acrylic acid) blend nanofibers

Hydrogel nanofibers with high water-absorption capacity and excellent biocompatibility offer wide use in biomedical areas. In this study, hydrogel nanofibers from polyvinylpyrrolidone (PVP) and PVP/poly(acrylic acid) (PAA) blend were prepared by electrospinning and by subsequent heat treatment. The effects of post-electrospinning heat treatment and PVP/PAA ratio on hydrogel properties of the nanofibers were examined. Heat treatment at a temperature above 180°C was found to play a key role in forming insoluble and water-absorbent nanofibers. Both PVP and PVP/PAA nanofibers showed high morphology stability in water and excellent water retention capacity. The swelling ratio of PVP/PAA nanofibers declined with increasing heating temperature and decreasing PVP/PAA unit ratio. In comparison with dense casting films, these nanofiber membranes showed nearly doubled swelling ratio.

Flood Risk Management In Small Urban River Using A Sustainable Urban Drainage System: Wortley Beck, Leeds, Uk

In the UK, urban river basins are particularly vulnerable to flash floods due to short and intense rainfall. This paper presents potential flood resilience approaches for the highly urbanised Wortley Beck river basin, south west of the Leeds city centre. The reach of Wortley Beck is approximately 6km long with contributing catchment area of 30km2 that drain into the River Aire. Lower Wortley has experienced regular flooding over the last few years from a range of sources, including Wortley Beck and surface and ground water, that affects properties both upstream and downstream of Farnley Lake as well as Wortley Ring Road. This has serious implications for society, the environment and economy activity in the City of Leeds. The first stage of the study involves systematically incorporating Wortley Beck’s land scape features on an Arc-GIS platform to identify existing green features in the region. This process also enables the exploration of potential blue green features: green spaces, green roofs, water retention ponds and swales at appropriate locations and connect them with existing green corridors to maximize their productivity. The next stage is involved in developing a detailed 2D urban flood inundation model for the Wortley Beck region using the CityCat model. CityCat is capable to model the effects of permeable/impermeable ground surfaces and buildings/roofs to generate flood depth and velocity maps at 1m caused by design storm events. The final stage of the study is involved in simulation of range of rainfall and flood event scenarios through CityCat model with different blue green features. Installation of other hard engineering individual property protection measures through water butts and flood walls are also incorporated in the CityCat model. This enables an integrated sustainable flood resilience strategy for this region.

Dinâmica da água no solo em cultivos de milho sob plantio direto e preparo convencional

A dinâmica da água em sistema de plantio direto (PD) é alterada em relação ao preparo convencional (PC) devido a modificações na estrutura do solo e a presença de palha na superfície. Para avaliar estas diferenças foram conduzidos experimentos de campo, em 2001/02 e 2002/03, em Eldorado do Sul, RS. O objetivo geral foi quantificar alterações físico-hídricas no perfil e na superfície do solo em PD e PC, com ênfase na dinâmica da água e respostas das plantas de milho. Os sistemas de manejo do solo foram implantados na área em 1995. Foram avaliadas propriedades físicas, a movimentação e a armazenagem de água no solo. Mediu-se a infiltração e a capacidade de campo e monitorou-se a dinâmica da água durante o ciclo da cultura, enfocando a secagem do solo e a extração de água em períodos sem precipitação. Nestes períodos também foi determinada a evaporação da água na superfície e avaliadas respostas das plantas. Os efeitos do plantio direto se evidenciaram nas camadas de solo próximas à superfície. A mesoporosidade foi a propriedade física mais afetada, apresentando uma distribuição exponencial de mesoporos no plantio direto, enquanto no preparo convencional a mesma se aproximou de uma curva normal. Em geral, a condutividade hidráulica, a retenção e a disponibilidade de água foram mais elevadas em plantio direto, principalmente, próximo à superfície. O solo em PD também apresentou maior umidade volumétrica com menor energia de retenção, resultando em redução no avanço da frente de secagem do solo e extração de água. A evaporação também foi maior em PD, demonstrando que a maior umidade no solo em plantio direto se deve ao aumento na capacidade de armazenagem de água. O aprofundamento radicular foi sempre maior no preparo convencional. O plantio direto altera propriedades físicas ligadas à dinâmica da água, proporcionando maior disponibilidade hídrica no solo ao longo do tempo.

New bacterial cellulose nanocomposites prepared by in situ radical polymerization of methacrylate monomers

Bacterial cellulose/polymethacrylate nanocomposites have received attention in numerous areas of study and in a variety of applications. The attractive properties of methacrylate polymers and bacterial cellulose, BC, allow the synthesis of new nanocomposites with distinct characteristics. In this study, BC/poly(glycidylmethacrylate) (BC/PGMA) and BC/poly(ethyleneglycol)methacrylate (BC/PPEGMA) nanocomposites were prepared through in situ free radical polymerization of GMA and PEGMA, respectively. Ammonium persulphate (APS) was used as an initiator and N,N’methylenebisacrilamide (MBA) was used as a crosslinker in BC/PGMA. Chemical composition, morphology, thermal stability, water absorption, mechanic and surface properties were determined through specific characterization techniques. The optimal polymerization was obtained at (1:2) for BC/PGMA, (1:2:0.2) ratio for BC/GMA/MBA and (1:20) for BC/PPEGMA, with 0.5% of initiator at 60 ºC during 6 h. A maximum of 67% and 87% of incorporation percentage was obtained, respectively, for the nanocomposites BC/PGMA/MBA and BC/PPEGMA. BC/PGMA nanocomposites exhibited an increase of roughness and compactation of the three-dimensional structure, an improvement in the thermal and mechanical properties, and a decrease in their swelling ability and crystallinity. On the other hand, BC/PPEGMA showed a decrease of stiffness of three-dimensional structure, improvement in thermal and mechanical properties, an increase in their swelling ability and a decrease the crystallinity. Both BC/polymethacrylate nanocomposites exhibited a basic surface character. The acid treatment showed to be a suitable strategy to modifiy BC/PGMA nanocomposites through epoxide ring-opening reaction mechanism. Nanocomposites became more compact, smooth and with more water retention ability. A decrease in the thermal and mechanical proprieties was observed. The new nanocomposites acquired properties useful to biomedical applications or/and removal of heavy metals due to the presence of functional groups.