Using FCD Mapper Software and Landsat Images to Assess Forest Canopy Density in Landscapes in Australia and the Philippines

Using Landsat imagery, forest canopy density (FCD) estimated with the FCD Mapper®, was correlated with predominant height (PDH, measured as the average height of the tallest 50 trees per hectare) for 20 field plots measured in native forest at Noosa Heads, south-east Queensland, Australia. A corresponding image was used to calculate FCD in Leyte Island, the Philippines and was validated on the ground for accuracy. The FCD Mapper was produced for the International Tropical Timber Organisation and estimates FCD as an index of canopy density using reflectance characteristics of Landsat Enhanced Thematic (ETM) Mapper images. The FCD Mapper is a ‘semi-expert’ computer program which uses interactive screens to allow the operator to make decisions concerning the classification of land into bare soil, grass and forest. At Noosa, a positive strong nonlinear relationship (r2 = 0.86) was found between FCD and PDH for 15 field plots with variable PDH but complete canopy closure. An additional five field plots were measured in forest with a broken canopy and the software assessed these plots as having a much lower FCD than forest with canopy closure. FCD estimates for forest and agricultural land in the island of Leyte and subsequent field validation showed that at appropriate settings, the FCD Mapper differentiated between tropical rainforest and banana or coconut plantation. These findings suggest that in forests with a closed canopy this remote sensing technique has promise for forest inventory and productivity assessment. The findings also suggest that the software has promise for discriminating between native forest with a complete canopy and forest which has a broken canopy, such as coconut or banana plantation.

Appropriate surveying methods in the Philippines: Can modern GPS units help?

An investigation was undertaken to test the effectiveness of two procedures for recording boundaries and plot positions for scientific studies on farms on Leyte Island, the Philippines. The accuracy of a Garmin 76 Global Positioning System (GPS) unit and a compass and chain was checked under the same conditions. Tree canopies interfered with the ability of the satellite signal to reach the GPS and therefore the GPS survey was less accurate than the compass and chain survey. Where a high degree of accuracy is required, a compass and chain survey remains the most effective method of surveying land underneath tree canopies, providing operator error is minimised. For a large number of surveys and thus large amounts of data, a GPS is more appropriate than a compass and chain survey because data are easily up-loaded into a Geographic Information System (GIS). However, under dense canopies where satellite signals cannot reach the GPS, it may be necessary to revert to a compass survey or a combination of both methods.

Combining GIS and Expert Opinion to Model Landscapes for a Smallholder Forest Extension Program in Leyte, the Philippines

A Geographic Information System (GIS) was used to model datasets of Leyte Island, the Philippines, to identify land which was suitable for a forest extension program on the island. The datasets were modelled to provide maps of the distance of land from cities and towns, land which was a suitable elevation and slope for smallholder forestry and land of various soil types. An expert group was used to assign numeric site suitabilities to the soil types and maps of site suitability were used to assist the selection of municipalities for the provision of extension assistance to smallholders. Modelling of the datasets was facilitated by recent developments of the ArcGIS® suite of computer programs and derivation of elevation and slope was assisted by the availability of digital elevation models (DEM) produced by the Shuttle Radar Topography (SRTM) mission. The usefulness of GIS software as a decision support tool for small-scale forestry extension programs is discussed.

A GIS Based Assessment of Land Suitable for Growing Hoop Pine in the Atherton, Eacham and Herberton Shires of North Queensland

The area of private land suitable and available for growing hoop pine (Araucaria cunninghamii) on the Atherton Tablelands in North Queensland was modelled using a geographic information system (GIS). In Atherton, Eacham and Herberton shires, approximately 64,700 ha of privately owned land were identified as having a mean annual rainfall and soil type similar to Forestry Plantations Queensland (FPQ) hoop pine growth plots with an approximate growth rate of 20 m3 per annum. Land with slope of over 25° and land covered with native vegetation were excluded in the estimation. If land which is currently used for high-value agriculture is also excluded, the net area of land potentially suitable and available for expansion of hoop pine plantations is approximately 22,900 ha. Expert silvicultural advice emphasized the role of site preparation and weed control in affecting the long-term growth rate of hoop pine. Hence, sites with less than optimal fertility and rainfall may be considered as being potentially suitable for growing hoop pine at a lower growth rate. The datasets had been prepared at various scales and differing precision for their description of land attributes. Therefore, the results of this investigation have limited applicability for planning at the individual farm level but are useful at the regional level to target areas for plantation expansion.

GIS/GPS to document increased access to community-based treatment for tuberculosis in Africa

Application of geographic information system (GIS) and global positioning system (GPS) technology in the Hlabisa community-based tuberculosis treatment programme documents the increase in accessibility to treatment after the expansion of the service from health facilities to include community workers and volunteers.

Developing a reliable audit instrument to measure the physical environment for physical activity

Background: The physical environment plays an important role in influencing participation in physical activity, although which factors of the physical environment have the greatest effect on patterns of activity remain to be determined. We describe the development of a comprehensive instrument to measure the physical environmental factors that may influence walking and cycling in local neighborhoods and report on its reliability. Methods: Following consultation with experts from a variety of fields and a literature search, we developed a Systematic Pedestrian and Cycling Environmental Scan (SPACES) instrument and used it to collect data over a total of 1987 kilometers of roads in metropolitan Perth, Western Australia. The audit instrument is available from the first author on request. Additional environmental information was collected using desktop methods and geographic information systems (GIS) technology. We assessed inter- and intra-rater reliability of the instrument among the 16 observers who collected the data. Results: The observers reported that the audit instrument was easy to use. Both inter- and intra-rater reliability of the environmental scan instrument were generally high. Conclusions: Our instrument provides a reliable, practical, and easy to-use method for collecting detailed street-level data on physical environmental factors that are potential influences on walking in local neighborhoods.

Coupling 3D visualisation to qualitative assessment of built environment designs

Geographical information systems (GIS) coupled to 3D visualisation technology is an emerging tool for urban planning and landscape design applications. The utility of 3D GIS for realistically visualising the built environment and proposed development scenarios is much advocated in the literature. Planners assess the merits of proposed changes using visual impact assessment (VIA). We have used Arcview GIS and visualisation software: called PolyTRIM from the University of Toronto, Centre for Landscape Research (CLR) to create a 3D scene for the entrance to a University campus. The paper investigates the thesis that to facilitate VIA in planning and design requires not only visualisation, but also a structured evaluation technique (Delphi) to arbitrate the decision-making process. (C) 2001 Elsevier Science B.V. All rights reserved.

Exploratory spatial data analysis techniques for examining urban crime

Regional planners, policy makers and policing agencies all recognize the importance of better understanding the dynamics of crime. Theoretical and application-oriented approaches which provide insights into why and where crimes take place are much sought after. Geographic information systems and spatial analysis techniques, in particular, are proving to be essential or studying criminal activity. However, the capabilities of these quantitative methods continue to evolve. This paper explores the use of geographic information systems and spatial analysis approaches for examining crime occurrence in Brisbane, Australia. The analysis highlights novel capabilities for the analysis of crime in urban regions.

A decision support process to compare Riparian revegetation options in Scheu Creek catchment in North Queensland

While riparian vegetation can play a major role in protecting land, water and natural habitat in catchments, there are high costs associated with tree planting and establishment and in diverting land from cropping. The distribution of costs and benefits of riparian revegetation creates conflicts in the objectives of various stakeholder groups. Multicriteria analysis provides an appropriate tool to evaluate alternative riparian revegetation options, and to accommodate the conflicting views of various stakeholder groups. This paper discusses an application of multicriteria analysis in an evaluation of riparian revegetation policy options for Scheu Creek, a small sub-catchment in the Johnstone River catchment in north Queensland, Australia. Clear differences are found in the rankings of revegetation options for different stakeholder groups with respect to environmental, social and economic impacts. Implementation of a revegetation option will involve considerable cost for landholders for the benefits of society. Queensland legislation does not provide a means to require farmers to implement riparian revegetation, hence the need for subsidies, tau incentives and moral suasion. (C) 2001 Academic Press.

Spatial distribution of vectors of Ross River virus and Barmah Forest virus on Russell Island, Moreton Bay, Queensland

We used a network of 20 carbon dioxide- and octenol-supplemented light traps to sample adult mosquitoes throughout Russell Island in southern Moreton Bay, south-east Queensland. Between February and April 2001, an estimated 1365 564 adult female mosquitoes were collected. In contrast to an average catch of 9754 female mosquitoes per trap night on Russell Island, reference traps set on Macleay Island and on the mainland returned average catches of 3172 and 222, respectively. On Russell Island, Ochlerotatus vigilax (Skuse), Coquillettidia linealis (Skuse), Culex annulirostris Skuse and Verrallina funerea (Theobald), known or suspected vectors of Ross River (RR) and/or Barmah Forest (BF) viruses, comprised 89.6% of the 25 taxa collected. When the spatial distributions of the above species were mapped and analysed using local spatial statistics, all were found to be present in highest numbers towards the southern end of the island during most of the 7 weeks. This indicated the presence of more suitable adult harbourage sites and/or suboptimal larval control efficacy. As immature stages and the breeding habitat of Cq. linealis are as yet undescribed, this species in particular presents a considerable impediment to proposed development scenarios. The method presented here of mapping the numbers of mosquitoes throughout a local government area allows specific areas that have high vector numbers to be defined.

A quantitative state and transition model for the Mitchell grasslands of central western Queensland

Concerns of reduced productivity and land degradation in the Mitchell grasslands of central western Queensland were addressed through a range monitoring program to interpret condition and trend. Botanical and eclaphic parameters were recorded along piosphere and grazing gradients, and across fenceline impact areas, to maximise changes resulting from grazing. The Degradation Gradient Method was used in conjunction with State and Transition Models to develop models of rangeland dynamics and condition. States were found to be ordered along a degradation gradient, indicator species developed according to rainfall trends and transitions determined from field data and available literature. Astrebla spp. abundance declined with declining range condition and increasing grazing pressure, while annual grasses and forbs increased in dominance under poor range condition. Soil erosion increased and litter decreased with decreasing range condition. An approach to quantitatively define states within a variable rainfall environment based upon a time-series ordination analysis is described. The derived model could provide the interpretive framework necessary to integrate on-ground monitoring, remote sensing and geographic information systems to trace states and transitions at the paddock scale. However, further work is needed to determine the full catalogue of states and transitions and to refine the model for application at the paddock scale.

Análise espacial do padrão de introdução e disseminação da dengue nos municípios do Espírito Santo

O número de municípios infestados pelo Aedes aegypti no Estado do Espírito Santo vem aumentando gradativamente, levando a altas taxas de incidência de dengue ao longo dos anos. Apesar das tentativas de combate à doença, esta se tornou uma das maiores preocupações na saúde pública do Estado. Este estudo se propõe a descrever a dinâmica da expansão da doença no Estado a partir da associação entre variáveis ambientais e populacionais, utilizando dados operacionalizados por meio de técnicas de geoprocessamento. O estudo utilizou como fonte de dados a infestação pelo mosquito vetor e o coeficiente de incidência da doença, as distâncias rodoviárias intermunicipais do Estado, a altitude dos municípios e as variáveis geoclimáticas (temperatura e suficiência de água), incorporadas a uma ferramenta operacional, as Unidades Naturais do Espírito Santo (UNES), representadas em um único mapa operacionalizado em Sistema de Informação Geográfica (SIG), obtido a partir do Sistema Integrado de Bases Georreferenciadas do Estado do Espírito Santo. Para análise dos dados, foi realizada a Regressão de Poisson para os dados de incidência de dengue e Regressão Logística para os de infestação pelo vetor. Em seguida, os dados de infestação pelo mosquito e incidência de dengue foram georreferenciados, utilizando como ferramenta operacional o SIG ArcGIS versão 9.2. Observou-se que a pluviosidade é um fator que contribui para o surgimento de mosquito em áreas não infestadas. Altas temperaturas contribuem para um alto coeficiente de incidência de dengue nos municípios capixabas. A variável distância em relação a municípios populosos é um fator de proteção para a incidência da doença. A grande variabilidade encontrada nos dados, que não é explicada pelas variáveis utilizadas no modelo para incidência da doença, reforça a premissa de que a dengue é condicionada pela interação dinâmica entre muitas variáveis que o estudo não abordou. A espacialização dos dados de infestação pelo mosquito e incidência de dengue e as Zonas Naturais do ES permitiu a visualização da influência das variáveis estatisticamente significantes nos modelos utilizados no padrão da introdução e disseminação da doença no Estado.

Abordagens metodológicas para avaliar risco de extinção de espécies de Brachyteles (Primates : Atelidae)

A distribuição geográfica de um táxon é limitada por aspectos ecológicos e históricos. Muitas atividades humanas têm causado modificações na cobertura vegetal, o que leva à fragmentação e perda do habitat. Isso tem levado à extinção local de populações de várias espécies, alterando sua distribuição geográfica. Entre elas estão as duas espécies do gênero Brachyteles (os muriquis), que são primatas endêmicos de um dos biomas mais afetados por esses processos, a Mata Atlântica. A União Internacional para a Conservação da Natureza (UICN) é uma organização que busca conservar a biodiversidade. Entre outros critérios, utiliza o conhecimento sobre as distribuições geográficas restritas das espécies para classificá-las em categorias de ameaça de extinção, nas chamadas listas vermelhas. Para isso, utiliza parâmetros espaciais, cujos resultados indicam o risco de extinção de determinado táxon em relação à sua distribuição geográfica. Muitas vezes os cálculos desses parâmetros são realizados de maneira subjetiva, de maneira que é importante a busca de métodos que tornem as classificações mais objetivas, precisas e replicáveis. Nesse contexto, o presente trabalho testou diferentes métodos de cálculos de três parâmetros relacionados à distribuição geográfica de B. hypoxanthus e B. arachnoides. Tratam-se de espécies ameaçadas de extinção, com localidades de ocorrência bem conhecidas, que foram profundamente afetadas pela degradação da Mata Atlântica. Assim, podem ser consideradas bons modelos para essas análises. Foi construído um banco de dados de localidades de ocorrência atuais das duas espécies. Por meio de abordagens de Sistemas de Informação Geográfica (SIG), foram estimadas a Extensão de Ocorrência (EOO) através de Mínimo Polígono Convexo e α-hull e Área de Ocupação (AOO) e Subpopulações por meio de métodos de grids, buffers circulares e α-hull, em diferentes escalas espaciais. Os resultados dos cálculos desses parâmetros foram comparados para identificar as abordagens e escalas mais adequadas para a avaliação de risco de extinção. Esses resultados indicam que as listas de localidades e os mapas de distribuição disponibilizados pela UICN precisam ser atualizados. Além disso, sugerem que α-hull é uma abordagem vantajosa para EOO e o método de buffers é mais adequado para os parâmetros de AOO e Subpopulações, quando utiliza escalas espaciais menores. Também foi utilizada a ferramenta GeoCAT, para as duas espécies. Essa ferramenta, por realizar análises de EOO e AOO instantâneas e por seus resultados serem semelhantes aos de outras análises, serve como uma abordagem preliminar de risco de extinção baseado no critério de distribuição geográfica.

Metodologia de representação identitária do patrimônio territorial : a água como elemento de identidade em Linhares/ES

Apresenta primeiramente o conceito de desenvolvimento local autossustentável dentro do enfoque territorialista. Mostra também o conceito de patrimônio territorial e o de representação identitária do território como instrumento de preservação do patrimônio, neste caso o territorial. O enfoque territorialista é adotado como base teórica para a construção do roteiro metodológico de representação identitária do território com vistas à preservação do patrimônio tendo como objeto empírico o município de Linhares/ES, que passa por um processo de intenso desenvolvimento de seu território e que apresenta um rico patrimônio, no que diz respeito aos recursos naturais, em especial o hídrico. Nos últimos anos tem-se registrado um crescimento forte dos instrumentos disponíveis para a produção de imagens do território, neste caso o uso da tecnologia de Sistemas de Informações Geográficas. Por meio deste recurso, adotado na Escola Territorialista Italiana, representa-se o patrimônio que constitui o território municipal, tendo como produtos finais o Atlas do patrimônio territorial no município de Linhares/ES e o Roteiro metodológico de representação identitária do patrimônio territorial.