Soil conditioning of sand for EPB applications:A laboratory research

EPB tunnelling requires the application of soil conditioning to increase its field of applicability particularly for cohesionless soils. Choosing the most suitable conditioning set for the various soils requires the use of a feasible laboratory test which can permit to define the characteristics of the conditioned soils and provide measurable data. A series of tests has been carried out using a laboratory screw conveyor device which was designed for this purpose and which simulates the extraction of the spoil from a pressure chamber in a similar way as in EPB tunnelling. The tested soils were medium-grain sands with varying amounts of silt and the tested conditioned mixtures were obtained with different water contents and amounts of foam. A simple slump test was also used to analyze the global characteristics of the conditioned soils. The test has shown that the proposed laboratory procedure permits a quantitative comparison to be made between different conditioning amounts and agents on the basis of measurable parameters. © 2007 Elsevier Ltd. All rights reserved.

Identification of damping in a bridge using a moving instrumented vehicle

In recent years, there has been a significant increase in the number of bridges which are being instrumented and monitored on an ongoing basis. This is in part due to the introduction of bridge management systems designed to provide a high level of protection to the public and early warning if the bridge becomes unsafe. This paper investigates a novel alternative; a low-cost method consisting of the use of a vehicle fitted with accelerometers on its axles to monitor the dynamic behaviour of bridges. A simplified half-car vehicle-bridge interaction model is used in theoretical simulations to test the effectiveness of the approach in identifying the damping ratio of the bridge. The method is tested for a range of bridge spans and vehicle velocities using theoretical simulations and the influences of road roughness, initial vibratory condition of the vehicle, signal noise, modelling errors and frequency matching on the accuracy of the results are investigated.

The Princeps Optimus : towards a new reading of Velleius Paterculus' history

Abstract This thesis works towards a new reading ofVelleius Paterculus' survey of Roman history, published in AD 29 or 30. Modem scholarship has tended to condemn Velleius as historian and stylist. Though opinions have started to change in the last few decades, even the most recent works generally treat him as a passive and perhaps unconscious conveyor of Roman cultural ideals and Augustan ideology. This thesis argues that the historian is, in fact, manipulating these themes to make definite political points. It focuses on the negativity of the history's conclusion as it stands in stark contrast to the preceding narrative celebrating the principates of Augustus and Tiberius. The thesis tentatively concludes that Velleius was trying to express concern over Rome's future, and specifically to influence Tiberius to return to Rome from his retreat on the island of Capri and curb the power of his "assistant," Sejanus.

Serpentine Cattle Chute Gives Handling Advantages

The article discusses the efficiency of a curved chute as opposed to a straight chute when leading cattle into a conveyor restrainer. The article was published in The National Provisioner in 1984.

Calmer – Because They’re Carried

The article discusses a "new 'V-conveyor restrainer system' keeps cattle calmer at point of slaughter". The paper was published in BEEF, October 1989.

Double Rail Restrainer for Handling Beef Cattle

The summary of the article reads "A new double rail conveyor restrainer for handling cattle at the slaughter plant is described. It has improved safety and ergonomics compared to the V restrainer conveyor it replaces. Cattle ride astride a moving conveyor. This design could also be adapted for veterinary work."

Rhythmic Masticatory Muscle Activity during Sleep: Etiology and Clinical Perspectives

L’activité rythmique des muscles masticateurs (ARMM) pendant le sommeil se retrouve chez environ 60% de la population générale adulte. L'étiologie de ce mouvement n'est pas encore complètement élucidée. Il est cependant démontré que l’augmentation de la fréquence des ARMM peut avoir des conséquences négatives sur le système masticatoire. Dans ce cas, l'ARMM est considérée en tant que manifestation d'un trouble moteur du sommeil connue sous le nom de bruxisme. Selon la Classification Internationale des Troubles du Sommeil, le bruxisme est décrit comme le serrement et grincement des dents pendant le sommeil. La survenue des épisodes d’ARMM est associée à une augmentation du tonus du système nerveux sympathique, du rythme cardiaque, de la pression artérielle et elle est souvent en association avec une amplitude respiratoire accrue. Tous ces événements peuvent être décrits dans le contexte d’un micro-éveil du sommeil. Cette thèse comprend quatre articles de recherche visant à étudier i) l'étiologie de l’ARMM pendant le sommeil en relation aux micro-éveils, et à évaluer ii) les aspects cliniques du bruxisme du sommeil, du point de vue diagnostique et thérapeutique. Pour approfondir l'étiologie de l’ARMM et son association avec la fluctuation des micro-éveils, nous avons analysé le patron cyclique alternant (ou cyclic alternating pattern (CAP) en anglais), qui est une méthode d’analyse qui permet d’évaluer l'instabilité du sommeil et de décrire la puissance des micro-éveils. Le CAP a été étudié chez des sujets bruxeurs et des sujets contrôles qui ont participé à deux protocoles expérimentaux, dans lesquels la structure et la stabilité du sommeil ont été modifiées par l'administration d'un médicament (la clonidine), ou avec l'application de stimulations sensorielles (de type vibratoire/auditif) pendant le sommeil. Dans ces deux conditions expérimentales caractérisées par une instabilité accrue du sommeil, nous étions en mesure de démontrer que les micro-éveils ne sont pas la cause ou le déclencheur de l’ARMM, mais ils représentent plutôt la «fenêtre permissive» qui facilite l'apparition de ces mouvements rythmiques au cours du sommeil. Pour évaluer la pertinence clinique du bruxisme, la prévalence et les facteurs de risque, nous avons effectué une étude épidémiologique dans une population pédiatrique (7-17 ans) qui était vue en consultation en orthodontie. Nous avons constaté que le bruxisme est un trouble du sommeil très fréquent chez les enfants (avec une prévalence de 15%), et il est un facteur de risque pour l'usure des dents (risque relatif rapproché, RRR 8,8), la fatigue des muscles masticateurs (RRR 10,5), les maux de tête fréquents (RRR 4,3), la respiration bruyante pendant le sommeil (RRR 3,1), et divers symptômes liés au sommeil, tels que la somnolence diurne (RRR 7,4). Ces résultats nous ont amenés à développer une étude expérimentale pour évaluer l'efficacité d'un appareil d'avancement mandibulaire (AAM) chez un groupe d'adolescents qui présentaient à la fois du bruxisme, du ronflement et des maux de tête fréquents. L'hypothèse est que dans la pathogenèse de ces comorbidités, il y a un mécanisme commun, probablement lié à la respiration pendant le sommeil, et que l'utilisation d'un AAM peut donc agir sur plusieurs aspects liés. À court terme, le traitement avec un AAM semble diminuer l'ARMM (jusqu'à 60% de diminution), et améliorer le ronflement et les maux de tête chez les adolescents. Cependant, le mécanisme d'action exact des AAM demeure incertain; leur efficacité peut être liée à l'amélioration de la respiration pendant le sommeil, mais aussi à l'influence que ces appareils pourraient avoir sur le système masticatoire. Les interactions entre le bruxisme du sommeil, la respiration et les maux de tête, ainsi que l'efficacité et la sécurité à long terme des AAM chez les adolescents, nécessitent des études plus approfondies.

Le potentiel musical des analyses sonores et autres phénomènes vibratoires

La version intégrale de cette thèse est disponible uniquement pour consultation individuelle à la Bibliothèque de l'Université de Montréal (www.bib.umontreal.ca/MU).

Modélisation statistique de l’érosion de cavitation d’une turbine hydraulique selon les paramètres d’opération

Dans une turbine hydraulique, la rotation des aubes dans l’eau crée une zone de basse pression, amenant l’eau à passer de l’état liquide à l’état gazeux. Ce phénomène de changement de phase est appelé cavitation et est similaire à l’ébullition. Lorsque les cavités de vapeur formées implosent près des parois, il en résulte une érosion sévère des matériaux, accélérant de façon importante la dégradation de la turbine. Un système de détection de l’érosion de cavitation à l’aide de mesures vibratoires, employable sur les turbines en opération, a donc été installé sur quatre groupes turbine-alternateur d’une centrale et permet d’estimer précisément le taux d’érosion en kg/ 10 000 h. Le présent projet vise à répondre à deux objectifs principaux. Premièrement, étudier le comportement de la cavitation sur un groupe turbine-alternateur cible et construire un modèle statistique, dans le but de prédire la variable cavitation en fonction des variables opératoires (tels l’ouverture de vannage, le débit, les niveaux amont et aval, etc.). Deuxièmement, élaborer une méthodologie permettant la reproductibilité de l’étude à d’autres sites. Une étude rétrospective sera effectuée et on se concentrera sur les données disponibles depuis la mise à jour du système en 2010. Des résultats préliminaires ont mis en évidence l’hétérogénéité du comportement de cavitation ainsi que des changements entre la relation entre la cavitation et diverses variables opératoires. Nous nous proposons de développer un modèle probabiliste adapté, en utilisant notamment le regroupement hiérarchique et des modèles de régression linéaire multiple.

Development of Free Space Method for Material Characterisation and GPR Study & A Case Study on Biological Samples

The thesis mainly focuses on material characterization in different environments: freely available samples taken in planar fonn, biological samples available in small quantities and buried objects.Free space method, finds many applications in the fields of industry, medicine and communication. As it is a non-contact method, it can be employed for monitoring the electrical properties of materials moving through a conveyor belt in real time. Also, measurement on such systems at high temperature is possible. NID theory can be applied to the characterization of thin films. Dielectric properties of thin films deposited on any dielectric substrate can be determined. ln chemical industry, the stages of a chemical reaction can be monitored online. Online monitoring will be more efficient as it saves time and avoids risk of sample collection.Dielectric contrast is one of the main factors, which decides the detectability of a system. lt could be noted that the two dielectric objects of same dielectric constant 3.2 (s, of plastic mine) placed in a medium of dielectric constant 2.56 (er of sand) could even be detected employing the time domain analysis of the reflected signal. This type of detection finds strategic importance as it provides solution to the problem of clearance of non-metallic mines. The demining of these mines using the conventional techniques had been proved futile. The studies on the detection of voids and leakage in pipes find many applications.The determined electrical properties of tissues can be used for numerical modeling of cells, microwave imaging, SAR test etc. All these techniques need the accurate determination of dielectric constant. ln the modem world, the use of cellular and other wireless communication systems is booming up. At the same time people are concemed about the hazardous effects of microwaves on living cells. The effect is usually studied on human phantom models. The construction of the models requires the knowledge of the dielectric parameters of the various body tissues. lt is in this context that the present study gains significance. The case study on biological samples shows that the properties of normal and infected body tissues are different. Even though the change in the dielectric properties of infected samples from that of normal one may not be a clear evidence of an ailment, it is an indication of some disorder.ln medical field, the free space method may be adapted for imaging the biological samples. This method can also be used in wireless technology. Evaluation of electrical properties and attenuation of obstacles in the path of RF waves can be done using free waves. An intelligent system for controlling the power output or frequency depending on the feed back values of the attenuation may be developed.The simulation employed in GPR can be extended for the exploration of the effects due to the factors such as the different proportion of water content in the soil, the level and roughness of the soil etc on the reflected signal. This may find applications in geological explorations. ln the detection of mines, a state-of-the art technique for scanning and imaging an active mine field can be developed using GPR. The probing antenna can be attached to a robotic arm capable of three degrees of rotation and the whole detecting system can be housed in a military vehicle. In industry, a system based on the GPR principle can be developed for monitoring liquid or gas through a pipe, as pipe with and without the sample gives different reflection responses. lt may also be implemented for the online monitoring of different stages of extraction and purification of crude petroleum in a plant.Since biological samples show fluctuation in the dielectric nature with time and other physiological conditions, more investigation in this direction should be done. The infected cells at various stages of advancement and the normal cells should be analysed. The results from these comparative studies can be utilized for the detection of the onset of such diseases. Studying the properties of infected tissues at different stages, the threshold of detectability of infected cells can be determined.

Studies on polymer blends with special reference to NBR/PVC and CR/PVC blends

The study is undertaken on PVC blends because of their all-round importance-One of the most prominent needs of PVC in application end-use is permanent plasticizationlo. Butadiene-acrylonitrile rubber (NBR) has been utilized as permanent plasticizer for PVC since the 1940s for wire and cable insulation, food contact, and pondliners used for oil containment23'24. Also plasticized PVC has been added to vulcanizable nitrile rubber, to yield improved ozone, thermal ageing, and chemical resistance resulting in applications including fuel hose covers, gaskets, conveyor belt covers, and printing roll covers. This blend is miscible in the range of 23 to 45 per cent acrylonitrile content in the butadiene-acrylqnitrile copolymerzs. The first phase of the study was directed towards modification blends. These blends, in addition to the polymers, require a host of additives like curatives for the NBR phase and stabilizers for the PVC phase26of the existing PVC blends, especially NBR/PVC. The second phase of the study was directed towards the development of novel PVC based blends. Chloroprene rubber (polychloroprene) (CR) is structurally similar to PVC and hence is likely to form successful blends with PVC32.

Reducció de vibracions residuals en moviments transitoris. Definició de lleis de moviment per mitjà de corbes B-spline

Molts sistemes mecànics existents tenen un comportament vibratori funcionalment perceptible, que es posa de manifest enfront d'excitacions transitòries. Normalment, les vibracions generades segueixen presents després del transitori (vibracions residuals), i poden provocar efectes negatius en la funció de disseny del mecanisme. El mètode que es proposa en aquesta tesi té com a objectiu principal la síntesi de lleis de moviment per reduir les vibracions residuals. Addicionalment, els senyals generats permeten complir dues condicions definides per l'usuari (anomenats requeriments funcionals). El mètode es fonamenta en la relació existent entre el contingut freqüencial d'un senyal transitori, i la vibració residual generada, segons sigui l'esmorteïment del sistema. Basat en aquesta relació, i aprofitant les propietats de la transformada de Fourier, es proposa la generació de lleis de moviment per convolució temporal de polsos. Aquestes resulten formades per trams concatenats de polinomis algebraics, cosa que facilita la seva implementació en entorns numèrics per mitjà de corbes B-spline.

Tactile localization of acoustic stimuli with an earmold vibratrory aid

This study examines the tactile localization of sound sources utilizing an earmold vibratory hearing aid.

Numerical simulation of baroclinic waves with a parameterized boundary layer

A dry three-dimensional baroclinic life cycle model is used to investigate the role of turbulent fluxes of heat and momentum within the boundary layer on mid-latitude cyclones. Simulations are performed of life cycles for two basic states, both with and without turbulent fluxes. The different basic states produce cyclones with contrasting frontal and mesoscale-flow structures. The analysis focuses on the generation of potential-vorticity (PV) in the boundary layer and its subsequent transport into the free troposphere. The dynamic mechanism through which friction mitigates a barotropic vortex is that of Ekman pumping. This has often been assumed to be also the dominant mechanism for baroclinic developments. The PV framework highlights an additional, baroclinic mechanism. Positive PV is generated baroclinically due to friction to the north-east of a surface low and is transported out of the boundary layer by a cyclonic conveyor belt flow. The result is an anomaly of increased static stability in the lower troposphere which restricts the growth of the baroclinic wave. The reduced coupling between lower and upper levels can be sufficient to change the character of the upper-level evolution of the mature wave. The basic features of the baroclinic damping mechanism are robust for different frontal structures, with and without turbulent heat fluxes, and for the range of surface roughness found over the oceans.

Boundary-layer ventilation by baroclinic lifecycles

Ventilation of the boundary layer has an important effect on local and regional air quality and is a prerequisite for long-range pollution transport. Once in the free troposphere, pollutants can alter the chemical composition of the troposphere and impact on the Earth's radiative forcing. Idealised baroclinic life cycles, LC1 and LC2, have been simulated in a three-dimensional dry hemispheric model in the presence of boundary-layer turbulent fluxes. A passive tracer is added to the simulations to represent pollution emitted at, or near, the surface. A simple conveyor-belt diagnostic is developed to objectively identify regions of the boundary layer that can be ventilated by either warm or cold conveyor belts. Transport of pollutants within and above the boundary layer is examined on synoptic scales. Three different physical mechanisms are found to interact with each other to ventilate pollutants out of the boundary layer. These mechanisms are turbulent mixing within the boundary layer, horizontal advection due to Ekman convergence and divergence within the boundary layer, and advection by the warm conveyor belt. The mass of tracer ventilated by the two life cycles is remarkably similar given the differences in frontal structure, suggesting that the large-scale baroclinicity is an effective constraint on ventilation.