Micro e minigeração no Brasil: viabilidade econômica e entraves do setor

Esse trabalho apresenta uma breve avaliação da geração distribuída no Brasil, representada pela mini e microgeração, após a homologação, pela Agência Nacional de Energia Elétrica (ANEEL), da Resolução Normativa 482/2012. O foco do trabalho será em projetos de mini e microgeração distribuída voltados para o consumidor final – portanto, a análise não contempla projetos de maior porte, que participam dos leilões de energia do mercado regulado

Caracterização físico-química e efeitos de frações polissacarídicas da alga amansia multifida na coagulação, inflamação, radicais livres e viabilidade celular

Galactans are polysaccharides sulfated present in the cell wall of red algae. Carrageenans are galactans well known in the food industry as gelling polysaccharides and for induce inflammatory process in rodents as animal model. The extraction of polysaccharides from A. multifida has been carried out by proteolysis and precipitation in different volumes of acetone, which produced three fractions (F1, F2, and FT). Chemical and physical analyses revealed that these fractions are sulfated galactan predominantly. Results of the antioxidant activity assays showed that all of these fractions have antioxidant activity and that was associated with sulfate content of the analysis of reducing power and total antioxidant capacity. However, these fractions were not effective against lipid peroxidation. The fraction FT presented higher activity on the APTT test at 200 μg (> 240 s). The assessment of the hemolytic activity showed that the FT fraction has the best activity, increasing lyses by the complement system to 42.3% (50 μg) (p< 0,001). The fraction FT showed the best yield, anticoagulant and hemolytic activity between the three fractions and therefore it was choose for the in vivo studies. The Inflammation assessment using the FT fraction (50 mg / kg MB) showed that the cellular migration and the IL-6 production increased 670.1% (p< 0,001) and 531.8% (p< 0,001), respectively. These results confirmed its use as an inflammation inducer in animal model. Cytotoxicity assay results showed that all fractions have toxic effects on 3T3 and HeLa cells after exposition of 48 hours, except when 100 μg for both F1 and FT were used. These results arise the discussion whether these polysaccharides it should be used as additive in foods, cosmetics and medicines.

Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise da Expressão de APE1 após Estresse Oxidativo Induzido em Células Proficientes e Deficientes na Via de Reparo por Excisão de Nucleotídeos

Riboflavin is a vitamin very important in aerobic organisms, as a precursor of many coenzymes involved in the electron transporter chain. However, after photosensitization of riboflavin with UV or visible light, it generates reactive oxygen species (ROS), which can oxidize the DNA. The repair of oxidative lesions on DNA occurs through the base excision repair pathway (BER), where APE1 endonuclease plays a central role. On the other hand, the nucleotide excision repair pathway (NER) repairs helix-distorting lesions. Recently, it was described the participation of NERproteins in the repair of oxidative damage and in stimulation of repair function fromAPE1. The aim of this research was to evaluate the cytotoxic effects of photosensitized riboflavin (RF*) in cells proficient and deficient in NER, correlating with APE1 expression. For this propose, the cells were treated with RF* and it was performed the cell viability assay, extraction of whole proteins, cells fractionation, immunoblotting, indirect immunofluorescence and analysis of polymorphisms of BER gens. The results evidenced that cells deficient in XPA and CSB proteins were more sensitive to RF*. However, XPC-deficient cells presented similar resistance to MRC5- SV cells, which is proficient in NER. These results indicate that XPA and CSB proteins have an important role on repair of oxidative lesions induced by RF*. Additionally, it was evidenced that single nucleotide polymorphisms (SNPs) in BER enzymes may influence in sensitivity of NER-deficient cell lines. Concerning the APE1 expression, the results showed that expression of this protein after treatment with RF* only changed in XPC-deficient cells. Though, it was observed that APE1 is recruited and is bound to chromatin in MRC5-SV and XPA cells after treatment with RF*. The results also showed the induction of DNA damage after treatment with RF*, through the analysis of-H2AX, since the treatment promoted an increase of endogenous levels of this phosphorylated protein, which acts signaling double strand-break on DNA. On the other hand, in XPC-deficient cells, regardless of resistance of RF*, the endogenous levels of APE1 are extremely reduced when compared with other cell lines and APE1 is not bound to chromatin after treatment with RF*. These results conclude that RF* was able to induce cell death in NERdeficient cells, where XPA and CSB cells were more sensitive when compared with MRC5-SV and XPC-deficient cells. This last result is potentially very interesting, since XPC-deficient cell line presents low levels of APE1. Additionally, the results evidenced that APE1 protein can be involved in the repair of oxidative damage induced by RF*, because APE1 is recruited and bound strongly to chromatin after treatment.

Influência do momento de coleta sobre a viabilidade de grão de pólen em maracacujá - doce (Passiflora alata Curtis)

O objetivo deste trabalho foi verificar o melhor momento para a coleta do grão de pólen de Passiflora alata, com relação à sua maior viabilidade. Foram coletados 35 botões florais, 7 de cada horário de coleta (8h 40, um dia antes da antese, 8h 40, 10h 45 e 16h, no dia da antese e 8h 40, um dia após a antese). Os testes foram feitos por coloração e germinação in vitro. utilizou-se o delineamento inteiramente casualizado, com 5 tratamentos e 7 repetições, e as médias foram comparadas pelo teste de Tukey, a 5% de probabilidade. O teste de viabilidade por coloração variou de 69,64 (no dia da antese, 16 horas) a 75,91% (um dia antes da antese). A porcentagem de germinação variou de 49,18 (24 horas após a antese) a 62,65% (no dia da antese, 10h 45). O melhor momento de coleta do pólen, com relação à melhor viabilidade e germinação, é 10h 45, no dia da antese.

Viabilidade agronômica do consórcio de alface e rúcula, em duas épocas de cultivo

Avaliou-se a produtividade de grupos de alface e da rúcula, em consórcio, em relação aos seus cultivos solteiros, na UNESP Jaboticabal, em condições de campo, em duas épocas de cultivo, maio a agosto e setembro a novembro de 2001, sob delineamento de blocos casualizados, com quatro repetições. Os tratamentos constaram de combinações dos fatores grupos de alface (crespa, cv. Vera; lisa, cv. Elisa e americana, cv. Tainá), sistemas de cultivo (consórcio e cultivo solteiro) e épocas de semeadura da rúcula para o estabelecimento do consórcio [0; 7 e 14 dias após o transplante (DAT) da alface]. As maiores matérias fresca e seca de alface foram obtidas na primavera, com destaque para a alface americana. As alfaces não foram afetadas pelo sistema de cultivo. A maior matéria fresca de rúcula, no outono-inverno, foi obtida em consórcio, a 0 DAT, com as alfaces crespa e lisa e, aos 7 DAT com americana, enquanto na primavera, quando foi consorciada aos 7 DAT com alface crespa e a 0 DAT com alfaces do grupo lisa e americana. A rúcula teve sua matéria seca reduzida nos consórcios estabelecidos tardiamente, aos 14 DAT. Os cultivos consorciados apresentaram-se superiores aos cultivos solteiros entre 5 e 93%, segundo o índice de uso eficiente da terra. Os maiores índices de uso eficiente da terra foram obtidos com os consórcios de rúcula e alface crespa a 0 DAT (1,93), no outono-inverno e pelas mesmas hortaliças aos 7 DAT (1,84), na primavera.

Viabilidade produtiva e econômica do consórcio entre chicória e rúcula em função da época de plantio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da viabilidade da utilização de cinza de lodo de esgoto como adição em argamassa de cimento Portland

The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied

Viabilidade de utilização de um compósito a partir de resíduos para a construção de casas populares

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Análise de viabilidade técnica de utilização da Fibra de bananeira com resina sintética em Compósitos

This paper aims to present the feasibility of using a composite using discarded material from the cultivation of banana tree (pseudostem), which is fibrillated together with synthetic resin replacing glass fiber to be used in structural elements that do not demand large mechanical stress such as reservoirs, troughs, domes, sewage pipes etc.. For this, there were studies about the mechanical properties of a composite made with polyester resin and fiber of banana tree (Musa sp, musac), in which the splints were removed from the pseudostem, being made fibrillation by hand, with the aid of a brush steel, followed by natural drying. After treatment for cleaning and removal of wax, the fiber was cut into pieces of approximately 60 mm to 100 mm, for, together with synthetic resin, make cards of a features fiber composite with random orientation relative to the weight of the resin. We used three different percentages of fiber (3%, 6% and 9%), in order to make a comparative study between them and what would be the one with the best performance. Were manufactured specimens of each material and then subjected to uniaxial tensile tests, three point bending, moisture absorption and thermal characteristics. The results show that, in general, the use of banana tree fiber is feasible simply by an improvement in the production process (machining of the procedure) and greater care in the manufacture of parts

Sucessão de cultivo de feijão-arroz com doses de adubação nitrogenada após adubação verde, em semeadura direta

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação preliminar da viabilidade de produção in vitro de um isolado brasileiro de baculovírus Spodoptera frugiperda MNPV

In vivo production of viral biopesticides is the major source of viral insecticides currently in the marketplace. However, this system presents limitations during production scale-up. For the Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV), the insect used for replication has cannibalistic characteristics, thus production is even more difficult. Insect cells are commonly used for in vitro baculovirus production. Most of these cell lines are derived from Lepidoptera species. The Sf21 cell line is derived from Spodoptera frugiperda caterpillar ovarian tissue, and its clonal isolate Sf9 has been used for biopesticide production due to its ease of growth in suspension cultures. In this work, the in vitro production capabilities of a Brazilian SfMNPV isolate obtained from cornfields was evaluated. Comparison of polyhedra production was carried out using both Sf21 and Sf9 cells, based on volumetric and specific yields. Both cell lines were cultivated in Hyclone medium supplemented with different fetal bovine serum concentrations (2,5 and 5%). The best results were obtained using Sf9 cells supplemented with 5% serum. These results were further confirmed quantitively through kinetic parameter estimation for both cells lines and different serum concentrations. After seven successive passages, this system still presented high specific polyhedra production

Desenvolvimento de sorvete probiótico a base de leite de cabra: estudo da formulação, características físico químicas, sensoriais e viabilidade das bactérias probióticas

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Efeito da nicotina na viabilidade e morfologia de fibroblastos: estudo in vitro

O objetivo do estudo foi avaliar in vitro o efeito da nicotina sobre a viabilidade e a morfologia celular utilizando-se uma linhagem contínua de fibroblastos. Para tal, foram formados dois grupos experimentais segundo a dose (0 - controle, 10 mig, 100 mig, 0,5 mg, 1 mg) e o tempo de condicionamento (1 e 24 horas). Cada um dos 12 orifícios de uma placa para cultura celular recebeu 2 ml de meio de Eagle, e 1 ml de suspensão de meio de cultura contendo aproximadamente 1 × 10(5) células/ml. Foi, então, acrescentada a solução de nicotina nas diferentes concentrações. Após o condicionamento com a droga, nos dois períodos testados, as células foram coradas com azul de trypan 0,4%, e observadas em microscópio invertido por um examinador cego para os grupos experimentais, que avaliou a viabilidade e a morfologia segundo o índice de Gamal. Os experimentos foram repetidos 5 vezes. Quanto à morfologia, os resultados obtidos demonstraram, no grupo condicionado por 1 h, que os controles apresentaram diferenças estatisticamente significantes em relação apenas à maior dose de nicotina; no entanto, foram encontradas diferenças estatisticamente significantes entre o controle e todas as concentrações após 24 horas de condicionamento. Na viabilidade celular, um maior número de células não viáveis foi observado nas diferentes concentrações de nicotina em comparação aos controles tanto após 1 quanto 24 horas de condicionamento (p < 0,05). em ambos períodos existiu uma tendência significativa de aumento do número de células não viáveis com o aumento da dose de nicotina (p = 0,0053; p = 0,00001 após 1 e 24 h respectivamente). Portanto, conclui-se que a nicotina pode alterar, in vitro, a viabilidade e a morfologia de fibroblastos de forma proporcional à dose e ao tempo de exposição.

Qualidade fisiológica de sementes de soja tratadas com fungicidas durante e após o armazenamento

O presente trabalho teve o objetivo de avaliar o efeito do tratamento fungicida durante e após a armazenagem, na qualidade fisiológica de sementes de soja. Utilizaram-se sementes da cultivar BR-16, produzidas na safra de 1999/2000 e armazenadas em Marechal Cândido Rondon - PR. Para o tratamento utilizou-se a mistura de carbendazin + thiram, na dosage de 30 e 70g de i.a./100kg de semente, respectivamente. Realizou-se o tratamento de amostras mensalmente, de maio a dezembro de 2000, sendo as sementes analisadas imediatamente após o procedimento. Sementes sem tratamento representaram a testemunha. As amostras tratadas e armazenadas foram analisadas e comparadas com as tratadas e analisadas imediatamente antes da semeadura (dezembro de 2000). A qualidade das sementes foi avaliada através dos testes de germinação, de tetrazólio para vigor e viabilidade e emergência em campo. O delineamento experimental foi inteiramente casualizado, com quatro repetições por tratamento para cada teste. Realizou-se a comparação das médias através do teste de Tukey a 5% de probabilidade. O teste de germinação e o de tetrazólio não evidenciaram efeito negativo do tratamento fungicida anterior ao período de armazenagem sobre a qualidade das sementes. As sementes tratadas e não apresentaram decréscimo de viabilidade e de vigor, atingindo valores de germinação inferiores a 75%, em dezembro de 2000. Na emergência em campo, constatou-se que as sementes mantidas tratadas por mais de quatro meses apresentaram desempenho inferior comparativamente às tratadas nas demais épocas.