Influence of the metal center on the morphology of coordination compounds thin films

Thin film morphology of tris-(8-hydroxyquinolate) aluminium (III) (Alq3) and bis-(8-hydroxyquinolate) oxovanadium (IV) (VOq2) are compared. Alq3 films deposited onto mica at 300K look almost featureless, but dendrimers or randomly distributed needle-shaped crystallites appear as a consequence of crystallization in time. We show that a possible origin of this process is exposure to solvent vapors. On the other hand, VOq2 films retain their textured morphology as thickness increases because of stabilizing intermolecular interactions between vanadyl groups.

Evaluación cuali-cuantitativa de espermatozoides de la cola del epedídimo de cuyes cavia porcellus criollos y mejorados en dos edades reproductivas

El objetivo de esta investigación fue evaluar las características cuali-cuantitativas de espermatozoides de cuyes extraídos de la cola del epidídimo según su fenotipo y edad reproductiva. Se realizó en la granja Irquis de la U. de Cuenca en 20 reproductores identificados por sus características fenotípicas y dispuestos en cuatro grupos: 5 criollos jóvenes (CJ), 5 criollos adultos (CA), 5 mejorados jóvenes (MJ), y 5 mejorados adultos (MA). Los cuyes fueron hemicastrados y de los epidídimos fueron disectados la cola sobre una caja petri. Se recuperó los espermatozoides por Swim up, diluidos en 1ml de medio (18% rafinosa y 3% leche descremada), procesados con Triladyl®, refrigerados a 5oC/1 hora, y equilibrados por 0, 2, 24, 48, 96, 192, y 360 horass para su análisis de viabilidad espermática. Se congelaron únicamente los espermatozoides de 2 hs de equilibrio en vapores de nitrógeno. Se usó un DCA de 2x2: fenotipo y edad, y se usó un ANOVA para comprobar significancia. Se obtuvo interacción (P<0,05) entre factores con eficiencia atribuida a MJ a las 0 hs: en Concentración (C) y Anormalidades de cola (AC), a las 24 hs: en motilidad individual (MIP) y 48 hs: en Vitalidad (VE). En MIP no se encontró diferencias (P>0,05) en ningún tiempo de medición. En VE sólo encontró diferencias (P<0,05) a las 96 hs (CJ:18,0;MJ:10,2;MA:8,6;CA:6,0%). En anormalidades totales (AT) sólo se encontró diferencias (P<0,05) a las 0 hs (MJ:26,3;CJ:32,6;MA:36,2;CA:38,5%); y en AC se encontró diferencias (P<0,05) a las 0 hs (MJ:4,6; CJ:9,5; CA:11,5; MA:16,4%), y a las 48 hs (CA:5,7;CJ:7,3;MJ:16,0;MA:18,1%). En Integridad de la membrana (HOS-Test) se obtuvo (P<0,05) diferencias a las 2 hs (MJ:20,0; MA:13,1;CA:10,7;CJ:9,0%) y a las 96 hs (CA:25,4;CJ:15,3;MJ:9,7; MA:8,8%). A la congelabilidad no se obtuvo sobrevivencia de espermatozoides en ninguno de los tratamientos. En conclusión, la cantidad y calidad de espermatozoides epididimarios de cuyes identificados fenotípicamente varía según su edad; sin embargo, no se pudo comprobar su variación en la congelabilidad mostrándose absolutamente inviables a la crío conservación

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Impact of potassium and phosphorus in biomass on the properties of fast Pyrolysis bio-oil

This study investigates fast pyrolysis bio-oils produced from alkali-metal-impregnated biomass (beech wood). The impregnation aim is to study the catalytic cracking of the pyrolysis vapors as a result of potassium or phosphorus. It is recognized that potassium and phosphorus in biomass can have a major impact on the thermal conversion processes. When biomass is pyrolyzed in the presence of alkali metal cations, catalytic cracking of the pyrolysis liquids occurs in the vapor phase, reducing the organic liquids produced and increasing yields of water, char, and gas, resulting in a bio-oil that has a lower calorific value and an increased chance of phase separation. Beech wood was impregnated with potassium or phosphorus (K impregnation and P impregnation, respectively) in the range of 0.10-2.00 wt %. Analytical pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) was used to examine the pyrolysis products during thermal degradation, and thermogravimetric analysis (TGA) was used to examine the distribution of char and volatiles. Both potassium and phosphorus are seen to catalyze the pyrolytic decomposition of biomass and modify the yields of products. 3-Furaldehyde and levoglucosenone become more dominant products upon P impregnation, pointing to rearrangement and dehydration routes during the pyrolysis process. Potassium has a significant influence on cellulose and hemicellulose decomposition, not just on the formation of levoglucosan but also other species, such as 2(5H)-furanone or hydroxymethyl-cyclopentene derivatives. Fast pyrolysis processing has also been undertaken using a laboratory-scale continuously fed bubbling fluidized-bed reactor with a nominal capacity of 1 kg h-1 at the reaction temperature of 525 °C. An increase in the viscosity of the bio-oil during the stability assessment tests was observed with an increasing percentage of impregnation for both additives. This is because bio-oil undergoes polymerization while placed in storage as a result of the inorganic content. The majority of inorganics are concentrated in the char, but small amounts are entrained in the pyrolysis vapors and, therefore, end up in the bio-oil.