Oxidative stress and inflammation in lean and obese subjects with polycystic ovary syndrome

To determine whether polycystic ovary syndrome (PCOS) independently influences oxidative stress and inflammation or if the culprit is the comorbidities of obesity and/or insulin resistance common to this condition.

Regeneration mechanism of a Lean NOx Trap (LNT) catalyst in the presence of NO investigated using isotope labelling techniques

The presence of NO during the regeneration period of a Pt-Ba/Al O Lean NO Trap (LNT) catalyst modifies significantly the evolution of products formed from the reduction of stored nitrates, particularly nitrogen and ammonia. The use of isotope labelling techniques, feeding NO during the storage period and NO during regeneration allows us to propose three different routes for nitrogen formation based on the different masses detected during regeneration, i.e. N (m/e = 28), N N (m/e = 29) and N (m/e = 30). It is proposed that the formation of nitrogen via Route 1 involves the reaction between hydrogen and NO released from the storage component to form NH mainly. Then, ammonia further reacts with NO located downstream to form N . In Route 2, it is postulated that the incoming NO reacts with hydrogen to form NH in the reactor zone where the trap has been already regenerated. This isotopically labelled ammonia travels through the catalyst bed until it reaches the regeneration front where it participates in the reduction of stored nitrates ( NO ) to form N N. The formation of N via Route 3 is believed to occur by the reaction between incoming NO and H . The modification of the hydrogen concentration fed during regeneration affects the relative importance of H or NH as reductants and thus the production of N via Route 1 and N N via Route 2.

Origin of double dinitrogen release feature during fast switching between lean and rich cycles for NOx storage reduction catalysts

The performance of NOx storage and reduction over 1.5 wt% Pt/20 wt% KNO3/K2Ti8O17 and 1.5 wt% Pt/K2Ti8O17 catalysts has been investigated using combined fast transient kinetic switching and isotopically labelled (NO)-N-15 at 350 degrees C. The evolution of product N-2 has revealed two significant peaks during 60 s lean/1.3 s rich switches. It also found that the presence of CO2 in the feed affects the release of N-2 in the second peak. Regardless of the presence/absence of water in the feed, only one peak of N-2 was observed in the absence of CO2. Gas-phase NH3 was not observed in any of the experiments. However, in the presence of CO2 the results obtained from in situ DRIFTS-MS analysis showed that isocyanate species are formed and stored during the rich cycles, probably from the reaction between NOx and CO, in which CO was formed via the reverse water-gas shift reaction. 

Gestão LEAN aplicada ao terceiro setor

A conjuntura atual económica, financeira e social tem pressionado o uso racional dos recursos existentes, seja pelo setor privado ou pelo setor público. Contudo, nem sempre as empresas e organizações conseguem fazê-lo da melhor forma possível, seja por falta de experiência, por falta de conhecimento ou simplesmente pela aversão à mudança. É no contexto de redução de custos/ gastos que a gestão Lean tem vindo a afirmar-se como um método/filosofia eficaz e o suficientemente flexível e robusta para se adaptar a diferentes realidades organizacionais. Nesse seguimento, este relatório testemunha a introdução da gestão Lean numa organização do Terceiro Setor – Centro Social e Paroquial da Vera Cruz, e questiona o seu valor acrescentado mesmo se implementada numa lógica parcelar e numa organização ainda globalmente longe de estar organizada segundo uma lógica Lean. Os resultados obtidos no âmbito do projeto em questão parecem apontar para uma operação bem sucedida e com boas perspetivas futuras, caso a referida organização dê continuidade à sua implementação.

Materials and concepts for CO2 lean ironmaking by pyroelectrolysis

The main purpose of this PhD thesis was to provide convincing demonstration for a breakthrough concept of pyroelectrolysis at laboratory scale. One attempted to identify fundamental objections and/or the most critical constraints, to propose workable concepts for the overall process and for feasible electrodes, and to establish the main requirements on a clearer basis. The main effort was dedicated to studying suitable anode materials to be developed for large scale industrial units with molten silicate electrolyte. This concept relies on consumable anodes based on iron oxides, and a liquid Fe cathode, separated from the refractory materials by a freeze lining (solid) layer. In addition, one assessed an alternative concept of pyroelectrolysis with electron blocking membranes, and developed a prototype at small laboratory scale. The main composition of the molten electrolyte was based on a magnesium aluminosilicate composition, with minimum liquidus temperature, and with different additions of iron oxide. One studied the dynamics of devitrification of these melts, crystallization of iron oxides or other phases, and Fe2+/Fe3+ redox changes under laser zone melting, at different pulling rates. These studies were intended to provide guidelines for dissolution of raw materials (iron oxides) in the molten electrolyte, to assess compatibility with magnetite based consumable anodes, and to account for thermal gradients or insufficient thermal management in large scale cells. Several laboratory scale prototype cells were used to demonstrate the concept of pyroelectrolysis with electron blocking, and to identify the most critical issues and challenges. Operation with and without electron blocking provided useful information on transport properties of the molten electrolyte (i.e., ionic and electronic conductivities), their expected dependence on anodic and cathodic overpotentials, limitations in faradaic efficiency, and onset of side electrochemical reactions. The concept of consumable anodes was based on magnetite and derived spinel compositions, for their expected redox stability at high temperatures, even under oxidising conditions. Spinel compositions were designed for prospective gains in refractoriness and redox stability in wider ranges of conditions (T, pO2 and anodic overpotentials), without excessive penalty for electrical conductivity, thermomechanical stability or other requirements. Composition changes were also mainly based on components of the molten aluminosilicate melt, to avoid undue contamination and to minimize the dissolution rate of consumable anodes. Additional changes in composition were intended for prospective pyroelectrolysis of Fe alloys, with additions of different elements (Cr, Mn, Ni, Ti).

Lean Production : Werkzeuge zur Realisierung

INHALT: l. Einleitung und Standortbestimmung 2. Japanische Wertvorstellungen 3. Inhalte der Lean Production 4. Fertigungssegmentierung 5. Informationsmanagement mit CIM- und Logistik-Komponenten 6. Logistikgerechte Strukturen der Lean Production 7. Realisierung der Lean Production 8. Zusammenfassung

Auswirkungen der Lean Production auf bestehende Logistik-Strukturen : Was die deutsche Wirtschaft von der neuen Philosophie lernen kann

Obwohl durchgängige CIM- und Logistik-Konzepte zur Erfüllung der permanent steigenden Kundenforderungen hinsichtlich spezifischer Produktausführungen bei qualitätsgerechter und termintreuer Auslieferung in den meisten Unternehmen noch nicht realisiert sind, beginnt bereits die Diskussion um eine neue Unternehmensstrategie: die "Lean Production". Das Ziel heißt diesmal, in allen Bereichen Ressourcen zu minimieren, um mit Hilfe einer schlanken Fertigung bei den Kosten Weltstandard zu erreichen.

Lean Production - zurück zur Meisterfertigung?

Kleine Losgrößen, bedingt durch immer neue Kundenanforderungen nach speziellen Produktausführungen, lassen aus Wettbewerbsgründen eine konventionelle Massenproduktion mit unfelxiblen Produktionsabläufen nicht mehr zu. Neue Wege sind nötig, um gegenüber der Konkurrenz - besonders aus Fernost - auch in Zukunft wettbewerbsfähig zu bleiben. Dabei hat gerade diese Konkurrenz mnachen Anstoss zur Veränderung durch für uns ungewohnte Wettbewerbsstrategien gegeben. Auch wenn viele der Grundlagen und Methoden dieser Strategien aus Europa stammen, wurden sie sehr geschickt und innovativ den dortigen gesellschaftlichen und technologischen Randbedingungen angepasst. Nun sind sie in anderer Form bei uns wieder ins Bewusstsein zurückgekehrt. Dies gilt insbesondere für Lean Production, die "schlanke" Produktion. Hier können die Fachleute bei uns lernen, wie sich durch Mitarbeitermotivierung, Vereinfachung und Dezentralisierung der Abläufe der Weltkostenstand wieder erreichen lässt.

O pensamento Lean Management aplicado ao Sistema de Formação Profissional da Marinha (SFPM)

Relatório de estágio de mestrado, Ciências da Educação (Formação de Adultos), Universidade de Lisboa, Instituto de Educação, 2011