Um estudo sobre os diferenciais de remuneração entre os professores das redes pública e privada de ensino

O artigo investiga os diferenciais de remuneração entre os professores dos diversos níveis de ensino, das redes pública e privada. Analisando somente os salários, os diferenciais são na maior parte dos casos favoráveis ao setor privado. Esta conclusão se altera quando se calcula o Valor Presente do Contrato de Trabalho. O VPCT leva em consideração toda a renda auferida pelo docente, incluindo os salários recebidos durante a vida ativa e também a aposentadoria. O VPCT do ensino público é sempre mais elevado que o VPCT privado. Também são calculadas as Taxas Internas de Retorno (TIRs) da previdência social, cujos resultados mostram que os retornos do setor público são maiores que os do setor privado. Conclui-se que as diferentes regras de aposentadoria têm importância significativa nos rendimentos ao longo da vida dos docentes. Também se conclui que docentes da rede pública não recebem remuneração inferior a seus pares do setor privado.

Elaboração de um modelo de valoração quantitativa das garantias para o setor de saneamento com utilização de Simulação de Monte Carlo: o caso PPP de Esgoto para a Região Metropolitana do Recife e Município de Goiânia

A situação do saneamento no Brasil é alarmante. Os serviços de água e esgotamento sanitário são prestados adequadamente somente para 59,4% e 39,7%, respectivamente, da população brasileira. Para mudar este quadro, estima-se que sejam necessários R$ 304 bilhões em investimentos. Parte desse volume terá que vir da iniciativa privada e a estruturação de parcerias público privadas é uma das formas de atingir este objetivo. Nestes projetos é comum o setor público oferecer garantias ao parceiro privado para assegurar a viabilidade do empreendimento. O presente trabalho apresenta um modelo para valoração destas garantias, utilizando como estudos de caso as PPP de esgoto da região metropolitana de Recife e do Município de Goiana. O resultado obtido mostrou a importância desta valoração, uma vez que dependendo do nível de garantia oferecida o valor presente dos desembolsos previstos para o setor público variou de zero a até R$ 204 milhões.

Avaliação de ativos biológicos: análise e proposta de metodologia de avaliação para o mercado brasileiro

O conceito de valor justo na agricultura, introduzido com a adoção das normas CPC 29 e IAS 41, entre 2009 e 2010, estabeleceu uma nova forma de mensurar e contabilizar os ativos biológicos. A mensuração dos ativos biológicos passa a ser feita, também, pelo meio do valor presente dos fluxos de caixa que o ativo gerará durante sua vida. Através deste novo panorama, o presente trabalho tem como objetivo principal propor uma metodologia que permita mensurar o valor justo de qualquer de ativo biológico, aliando conceitos econômicos e agronômicos. Assim, para compor a proposta metodológica do cálculo do valor justo dos ativos biológicos, buscou-se ajustar alguns parâmetros da composição do fluxo de caixa descontado para que o método consiga aferir a situação da planta ou do animal a ser avaliado no local onde eles se encontram. Além dos ajustes propostos no fluxo de caixa, uma avaliação das condições agronômicas dos ativos biológicos foi recomendada, como parte integrante da metodologia de avaliação proposta. Posteriormente, como alvo secundário, testou-se empiricamente a metodologia proposta (em exceção a parte agronômica) com uma avaliação da lavoura de soja.

Mecanismo LPVR - Least Present Value of Revenues como mitigador de riscos em concessões rodoviárias: uma aplicação a um caso brasileiro

Nos últimos anos o governo brasileiro tem adotado a postura de incentivo a projetos de infraestrutura, sendo as concessões rodoviárias um dos principais mecanismos. Muito se discute sobre a melhor forma de remuneração das concessionárias, sem que, ao mesmo tempo, os usuários não tenham um custo elevado e possam usufruir de bons serviçoes prestados.Essa discussão passa, principalmente, por uma análise de risco de tráfego, que hoje é inteiramente alocado as cconcessionárias. A metodologia utilizada nos últimos leilões segue uma exigência de Taxa Interna de Retorno ( TIR ) máxima, pelo Poder Concedente ( ANTT ), em termos reais e um prazo de concessão fixo. A partir de custos e investimentos estimados em determinada concessão, a ANTT define uma tarifa-teto a ser cobrada pela concessionária aos usuários através da TIR máxima exigida no projeto. Esta TIR é calculada com base no custo médio ponderado de capital ( WACC ) de empresas do setor, que tem ações negociadas na BM&F Bovespa, utilizando-se apenas dados domésticos. Neste trabalho é proposto um modelo alternativo, baseado no menor valor presente das receitas ( LPVR - Least Present Value of Revenues ). Neste modelo observamos que o risco de tráfego é bem menor para a concessionária, pois a concessão só se expira quando determinado nível de receitas exigido pela concessionária é atingido. Ou seja, para tal, é necessário um modelo de prazo flexível. Neste mecanismo, entretanto, com menor risco de tráfego, o upside e o downside, em termos de retorno, são menores em comparação com o modelo vigente. Utilizando este modelo, o Poder Concedente pode também definir um vencedor para o leilão ( a concessionária que ofertar o menor valor presente das receitas ) e também se utilizar da proposta de simulação de tráfegos para a definição de um prazo máximo para a concessão, em caso de implementação do mecanismo proposto.

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Simulação e análise econômica da produção in vivo e in vitro de embriões em bovinos

The objective of this work was to evaluate the effect of the variables number of recipients, synchronization protocol, reproductive efficiency indicators and pregnancy cost, in the economic effectiveness of in vivo and in vitro bovine embryo production. A simulation application was elaborated to allow the user to insert the input variable parameters. A basic scenario, from the efficiency traditional rates of in vivo (ET) and in vitro production (IVP) techniques of bovine embryos, was introduced in the software as a criterion to compare the results. This software was able to reproduce both ET and IVP scenarios. The embryo production was simulated through stochastic simulation. The optimal number of recipients using sensitivity analysis was determined. The net present value and cost per pregnancy were used as a decision parameter. The synchronization for fixed-time embryo transfer decreased the recipient idleness and, consequently, the final cost of pregnancy, in comparison to the traditional methodology. Foetal sexing must be associated to IVP of bovine embryos. In addition, the optimal recipient number per donor is variable and depends on data inserted in the system.

Viabilidade econômica da utilização do biogás produzido em granja suínícola para geração de energia elétrica

A produção de biogás por meio de biodigestão anaeróbia representa um avanço para equacionar o problema dos dejetos produzidos pela suinocultura e disponibilidade de energia no meio rural. Este trabalho teve como objetivo estimar a viabilidade econômica de um sistema biointegrado para geração de eletricidade a partir do aproveitamento de dejetos de suínos. Os dados para este estudo foram coletados em uma agroindústria, onde são realizadas diversas atividades agrícolas; entretanto, a suinocultura foi selecionada para o processo de análise de biodigestão anaeróbia, pelo fato de gerar uma grande quantidade de dejetos, com dificuldade de disposição no meio ambiente, configurando um estudo de caso. O biodigestor analisado é um modelo tubular contínuo, com calha de água em alvenaria e com uma manta plástica como gasômetro, onde são depositados diariamente os dejetos de 2.300 suínos em fase de terminação. O investimento inicial para implantação foi estimado em R$ 51.537,17, e os custos anuais do sistema foram de R$ 5.708,20 com manutenção, R$ 4.390,40 com depreciação e R$ 1.366,77 com juros. Concluiu-se que o sistema de produção de biogás é viável do ponto de vista econômico, se o consumo de energia elétrica for de 35 kWh por dia, em média, onde o valor presente líquido (VLP) é de R$ 9.494,90, e a taxa interna de retorno (TIR) é de 9,34% ao ano.

Análise da viabilidade econômica de um sistema de aquecimento solar de água para uma empresa do setor hoteleiro

This paper presents an analysis of technical and financial feasibility of the use of a solar system for water heating in a fictitious hotel located in the Northeast region. Thereunto it is used techniques of solar collectors´ sizing and methods of financial mathematics, such as Net Present Value (NPV), Internal Rate of Return (IRR) and Payback. It will also be presented a sensitivity analysis to verify which are the factors that impact the viability of the solar heating. Comparative analysis will be used concerning three cities of distinct regions of Brazil: Curitiba, Belém and João Pessoa. The viability of using a solar heating system will be demonstrated to the whole Brazil, especially to the northeast region as it is the most viable for such an application of solar power because of its high levels of solar radiation. Among the cities examined for a future installation of solar heating systems for water heating in the hotel chain, João Pessoa was the one that has proved more viable.

Estudo da recuperação de óleo por drenagem gravitacional assistida por injeção de vapor

Steam assisted gravity drainage process (SAGD) involves two parallel horizontal wells located in a same vertical plane, where the top well is used as steam injector and the bottom well as producer. The dominant force in this process is gravitational. This improved oil recovery method has been demonstrated to be economically viable in commercial projects of oil recovery for heavy and extra heavy oil, but it is not yet implemented in Brazil. The study of this technology in reservoirs with characteristics of regional basins is necessary in order to analyze if this process can be used, minimizing the steam rate demand and improving the process profitability. In this study, a homogeneous reservoir was modeled with characteristics of Brazilian Northeast reservoirs. Simulations were accomplished with STARS , a commercial software from Computer Modelling Group, which is used to simulate improved oil recovery process in oil reservoirs. In this work, a steam optimization was accomplished in reservoirs with different physical characteristics and in different cases, through a technical-economic analysis. It was also studied a semi-continuous steam injection or with injection stops. Results showed that it is possible to use a simplified equation of the net present value, which incorporates earnings and expenses on oil production and expenses in steam requirement, in order to optimize steam rate and obtaining a higher net present value in the process. It was observed that SAGD process can be or not profitable depending on reservoirs characteristics. It was also obtained that steam demand can still be reduced injecting in a non continuous form, alternating steam injection with stops at several time intervals. The optimization of these intervals allowed to minimize heat losses and to improve oil recovery

O enigmático problema das gigantes ricas em Lítio e as perspectivas com o satélite Kepler

Lithium (Li) is a chemical element with atomic number 3 and it is among the lightest known elements in the universe. In general, the Lithium is found in the nature under the form of two stable isotopes, the 6Li and 7Li. This last one is the most dominant and responds for about 93% of the Li found in the Universe. Due to its fragileness this element is largely used in the astrophysics, especially in what refers to the understanding of the physical process that has occurred since the Big Bang going through the evolution of the galaxies and stars. In the primordial nucleosynthesis in the Big Bang moment (BBN), the theoretical calculation forecasts a Li production along with all the light elements such as Deuterium and Beryllium. To the Li the BNB theory reviews a primordial abundance of Log log ǫ(Li) =2.72 dex in a logarithmic scale related to the H. The abundance of Li found on the poor metal stars, or pop II stars type, is called as being the abundance of Li primordial and is the measure as being log ǫ(Li) =2.27 dex. In the ISM (Interstellar medium), that reflects the current value, the abundance of Lithium is log ǫ(Li) = 3.2 dex. This value has great importance for our comprehension on the chemical evolution of the galaxy. The process responsible for the increasing of the primordial value present in the Li is not clearly understood until nowadays. In fact there is a real contribution of Li from the giant stars of little mass and this contribution needs to be well streamed if we want to understand our galaxy. The main objection in this logical sequence is the appearing of some giant stars with little mass of G and K spectral types which atmosphere is highly enriched with Li. Such elevated values are exactly the opposite of what could happen with the typical abundance of giant low mass stars, where convective envelops pass through a mass deepening in which all the Li should be diluted and present abundances around log ǫ(Li) ∼1.4 dex following the model of stellar evolution. In the Literature three suggestions are found that try to reconcile the values of the abundance of Li theoretical and observed in these rich in Li giants, but any of them bring conclusive answers. In the present work, we propose a qualitative study of the evolutionary state of the rich in Li stars in the literature along with the recent discovery of the first star rich in Li observed by the Kepler Satellite. The main objective of this work is to promote a solid discussion about the evolutionary state based on the characteristic obtained from the seismic analysis of the object observed by Kepler. We used evolutionary traces and simulation done with the population synthesis code TRILEGAL intending to evaluate as precisely as possible the evolutionary state of the internal structure of these groups of stars. The results indicate a very short characteristic time when compared to the evolutionary scale related to the enrichment of these stars

Avaliação econômica de sistemas agroflorestais implantados para recuperação de reserva legal no Pontal do Paranapanema, São Paulo

O Pontal do Paranapanema, extremo oeste do Estado de São Paulo, é conhecido em todo o Brasil devido aos conflitos pela posse da terra, protagonizados pelo Movimento dos Trabalhadores Rurais Sem Terra (MST), que transformou significativamente a paisagem da região, onde atualmente se observam pequenas ilhas de assentamentos rurais imersos numa matriz de grandes pastagens. O Código Florestal prevê que esses assentamentos, assim como qualquer propriedade rural, deve manter 20% de sua área com cobertura vegetal arbórea. Essa área, conhecida como Reserva Florestal Legal, deve ser restaurada, caso não exista. Assim, esta pesquisa se desenvolveu no assentamento Santa Zélia, Município de Teodoro Sampaio, São Paulo, numa área de 15 ha de Reserva Legal. Seis famílias desse assentamento foram responsáveis pela restauração da área, através de módulos agroflorestais (Taungya) temporários. Dois indicadores foram utilizados para avaliação econômica da produção agrícola na área: Valor Presente Líquido (VLP) e Relação Benefício-Custo (RB/C). Os resultados indicaram valores positivos em todas as famílias analisadas, levando à conclusão de que sistemas agroflorestais podem ser adotados na recuperação de áreas de reserva legal em propriedades rurais. Sua maior ou menor viabilidade econômica irá depender de um manejo mais intenso na área para produção agrícola e de preços satisfatórios para venda no mercado.

Los costos de la transición en un régimen de beneficio definido

Incluye Bibliografía

Reforma previsional en Brasil: la nueva regla para el cálculo de los beneficios

Incluye Bibliografía