Prognóstico de falhas baseado em redes neurais com estados de eco

Tese (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2015.

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Controle aplicado a poços com método de elevação e bombeio centrífugo submerso

The Electrical Submersible Pumping is an artificial lift method for oil wells employed in onshore and offshore areas. The economic revenue of the petroleum production in a well depends on the oil flow and the availability of lifting equipment. The fewer the failures, the lower the revenue shortfall and costs to repair it. The frequency with which failures occur depends on the operating conditions to which the pumps are submitted. In high-productivity offshore wells monitoring is done by operators with engineering support 24h/day, which is not economically viable for the land areas. In this context, the automation of onshore wells has clear economic advantages. This work proposes a system capable of automatically control the operation of electrical submersible pumps, installed in oil wells, by an adjustment at the electric motor rotation based on signals provided by sensors installed on the surface and subsurface, keeping the pump operating within the recommended range, closest to the well s potential. Techniques are developed to estimate unmeasured variables, enabling the automation of wells that do not have all the required sensors. The automatic adjustment, according to an algorithm that runs on a programmable logic controller maintains the flow and submergence within acceptable parameters avoiding undesirable operating conditions, as the gas interference and high engine temperature, without need to resort to stopping the engine, which would reduce the its useful life. The control strategy described, based on modeling of physical phenomena and operational experience reported in literature, is materialized in terms of a fuzzy controller based on rules, and all generated information can be accompanied by a supervisory system

Manutenzione su condizione e analisi dei ricambi per macchine automatiche nell’ottica industria 4.0. Il caso SACMI S.C.

In questo elaborato di tesi si affronta uno studio inerente alla Manutenzione su Condizione (CBM), applicata ad una macchina automatica adibita alla produzione di capsule in plastica, in collaborazione con il gruppo SACMI S.C. di Imola. Nel Capitolo 1 viene fornita una introduzione sul tema della manutenzione e sulla sua evoluzione dalla prima rivoluzione industriale ad oggi. Nel Capitolo 2 vengono descritti i principi teorici della manutenzione predittiva e se ne analizza lo stato dell’arte. Nel Capitolo 3 viene fornita una introduzione sull’azienda SACMI S.C. e in seguito vengono descritte nel dettaglio le macchine sulle quali si sono concentrate le successive analisi. Nel Capitolo 4 viene approfondito l’estrusore, uno dei componenti principali delle macchine analizzate. Nel Capitolo 5 viene presentato un esempio di valutazione dell’efficienza di alcune macchine collegate in serie attraverso il calcolo di un indicatore chiamato Overall Equipment Effectiveness (OEE). Il Capitolo 6 rappresenta il cuore della tesi e contiene tutte le analisi di CBM effettuate durante il periodo di tirocinio. Vengono analizzati i principali gruppi funzionali della macchina a partire da quelli più critici per tempi o costi di manutenzione. Le analisi sono state condotte ricercando all’interno di tutto il parco macchine quelle che presentavano delle condizioni di funzionamento sospette. Nel Capitolo 7 vengono presentate alcune analisi relative ai tempi di fermo macchina dovuti alle manutenzioni preventive e ai costi dei ricambi previsti dal manuale di manutenzione. Queste analisi vengono poi declinate su un caso reale nel quale si calcola il costo dei ricambi negli ultimi cinque anni distinguendo tra costi dovuti ad azioni preventive o correttive. Nel Capitolo 8 vengono presentate le conclusioni, mentre nel Capitolo 9 sono presentati gli sviluppi futuri di questo lavoro.

Integrating Machine Learning Paradigms for Predictive Maintenance in the Fourth Industrial Revolution era

In the last decade, manufacturing companies have been facing two significant challenges. First, digitalization imposes adopting Industry 4.0 technologies and allows creating smart, connected, self-aware, and self-predictive factories. Second, the attention on sustainability imposes to evaluate and reduce the impact of the implemented solutions from economic and social points of view. In manufacturing companies, the maintenance of physical assets assumes a critical role. Increasing the reliability and the availability of production systems leads to the minimization of systems’ downtimes; In addition, the proper system functioning avoids production wastes and potentially catastrophic accidents. Digitalization and new ICT technologies have assumed a relevant role in maintenance strategies. They allow assessing the health condition of machinery at any point in time. Moreover, they allow predicting the future behavior of machinery so that maintenance interventions can be planned, and the useful life of components can be exploited until the time instant before their fault. This dissertation provides insights on Predictive Maintenance goals and tools in Industry 4.0 and proposes a novel data acquisition, processing, sharing, and storage framework that addresses typical issues machine producers and users encounter. The research elaborates on two research questions that narrow down the potential approaches to data acquisition, processing, and analysis for fault diagnostics in evolving environments. The research activity is developed according to a research framework, where the research questions are addressed by research levers that are explored according to research topics. Each topic requires a specific set of methods and approaches; however, the overarching methodological approach presented in this dissertation includes three fundamental aspects: the maximization of the quality level of input data, the use of Machine Learning methods for data analysis, and the use of case studies deriving from both controlled environments (laboratory) and real-world instances.

Smart tracking of composite parts: feasibility study and effect on mechanical behaviour

This research proposes a solution for integrating RFID - Radio Frequency Identification technology within a structure based on CFRPs - Carbon Fiber Reinforced Polymers. Therefore, the main objective is to use technology to monitor and track composite components during manufacturing and service life. The study can be divided into two macro-areas. The first portion of the research evaluates the impact of the composite materials used on transmitting the electromagnetic signal to and from the tag. RFID technology communicates through radio frequencies to to track and trace items associated with the tags. In the first instance, a feasibility study was carried out to assess using commercially available tags. Then, after evaluating different solutions, it was decided to incorporate the tags into coupons during production. The second portion of the research is focused on evaluating the impact on the composite material's resistance to tag embedding. It starts with designing tensile test specimens through the FEM model with different housing configurations. Subsequently, the best configuration was tested in the facilities of the In the Faculty of Aerospace Engineering at TU Delft, particularly in the Structure & Materials Laboratory, two tests were conducted: the first one based on ASTM D3039/D3039 - 14 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, the second one dividing the path to failure into failure intervals in a load-unload-reload. Both tests were accompanied by instruments such as DIC, AE, C-Scan and Optical Microscopes. The expected result of the inclusion of RFID tags in composite components is that it brings added value to the parts with which it is associated without affecting too much its mechanical properties. This comes first from the automatic identification of RFID during the production cycle and its useful life. As a result, improvements were made in the design of production facilities.

A curious herbal :containing five hundred cuts, of the most useful plants, which are now used in the practice of physick engraved on folio copper plates, after drawings taken from the life /by Elizabeth Blackwell. To which is added a short description of ye plants and their common uses in physick.

1737 v. 1 #1010

A curious herbal :containing five hundred cuts, of the most useful plants, which are now used in the practice of physick engraved on folio copper plates, after drawings taken from the life /by Elizabeth Blackwell. To which is added a short description of ye plants and their common uses in physick.

1739 v. 2 #1011

Quality of life: a potentially useful measure to indicate subclinical flares in Crohn disease.

Background:  While quality of life (QoL) is a well-recognised outcome measure of Crohn disease (CD) activity, its influence on other outcome measures, including exacerbation of CD is poorly understood. If QoL measures were to be associated with intestinal inflammatory activity, they might be useful for early detection of subclinical flares. Aims:  We hypothesised that low QoL might be associated with subsequent CD flares. Methods:  A cohort of 318 adult CD patients was observed for 1 year after assessment of baseline characteristics. Data were collected in Swiss university hospitals, regional hospitals and private practices. At inclusion, patients completed the Inflammatory Bowel Disease QoL Questionnaire (gastrointestinal QoL; range: 32 to 224 points) and the Short Form-36 Health Survey (general QoL; range: 35 to 145 points). During follow up, flares were recorded. Binary logistic regression was performed to estimate the relation between QoL and the odds of subsequent flares. Results:  A twofold decrease in the odds of flares (99% CI: 1.1; 4.0) per standard deviation of gastrointestinal QoL and a threefold decrease (99% CI: 1.5; 6.2) per standard deviation of general QoL were observed. Conclusions:  The close association between QoL and subsequent flares suggests that QoL measures might be useful in detecting upcoming flares before they become clinically apparent.

QUALITY OF LIFE: A POTENTIALLY USEFUL MEASURE TO INDICATE SUBCLINICAL FLARES IN CROHN'S DISEASE

While quality of life (QoL) is a well-recognised outcome measure of Crohn disease (CD) activity, its influence on other outcome measures, including exacerbation of CD is poorly understood. If QoL measures were to be associated with intestinal inflammatory activity, they might be useful for early detection of subclinical flares.

Life-threatening adverse events following therapeutic opioid administration in adults: Is pharmacogenetic analysis useful?

BACKGROUND Systemic approaches are needed to understand how variations in the genes associated with opioid pharmacokinetics and response can be used to predict patient outcome. The application of pharmacogenetic analysis to two cases of life-threatening opioid-induced respiratory depression is presented. The usefulness of genotyping in the context of these cases is discussed. METHODS A panel of 20 functional candidate polymorphisms in genes involved in the opioid biotransformation pathway (CYP2D6, UGT2B7, ABCB1, OPRM1, COMT) were genotyped in these two patients using commercially available genotyping assays. RESULTS In case 1, the patient experienced adverse outcomes when administered codeine and morphine, but not hydromorphone. Genetic test results suggested that this differential response may be due to an inherent propensity to generate active metabolites from both codeine and morphine. These active metabolites are not generated with hydromorphone. In case 2, the patient experienced severe respiratory depression during postoperative recovery following standard doses of morphine. The patient was found to carry genetic variations that result in decreased morphine efflux transporter activity at the blood-brain barrier and increased sensitivity to opioids. CONCLUSIONS Knowledge of the relative contribution of pharmacogenetic biomarkers and their influence on opioid response are continually evolving. Pharmacogenetic analysis, together with clinical history, has the potential to provide mechanistic insight into severe respiratory depressive events in patients who receive opioids at therapeutic doses.

Hand book of practical receipts, or Useful hints in every day life /

Includes index.

Mnemonics : or, The new science of artificial memory; explained in its application to the study of numbers, the sciences, and to useful occupations of life, whereby the natural memory is greatly assisted and strenghtened ...

Preface signed: T. W. D.