Critical analysis of autoregressive and fast Fourier transform markers of cardiovascular variability in rats and humans

The autonomic nervous system plays an important role in physiological and pathological conditions, and has been extensively evaluated by parametric and non-parametric spectral analysis. To compare the results obtained with fast Fourier transform (FFT) and the autoregressive (AR) method, we performed a comprehensive comparative study using data from humans and rats during pharmacological blockade (in rats), a postural test (in humans), and in the hypertensive state (in both humans and rats). Although postural hypotension in humans induced an increase in normalized low-frequency (LFnu) of systolic blood pressure, the increase in the ratio was detected only by AR. In rats, AR and FFT analysis did not agree for LFnu and high frequency (HFnu) under basal conditions and after vagal blockade. The increase in the LF/HF ratio of the pulse interval, induced by methylatropine, was detected only by FFT. In hypertensive patients, changes in LF and HF for systolic blood pressure were observed only by AR; FFT was able to detect the reduction in both blood pressure variance and total power. In hypertensive rats, AR presented different values of variance and total power for systolic blood pressure. Moreover, AR and FFT presented discordant results for LF, LFnu, HF, LF/HF ratio, and total power for pulse interval. We provide evidence for disagreement in 23% of the indices of blood pressure and heart rate variability in humans and 67% discordance in rats when these variables are evaluated by AR and FFT under physiological and pathological conditions. The overall disagreement between AR and FFT in this study was 43%.

Detection of patients with functional dyspepsia using wavelet transform applied to their electrogastrogram

The aim of the present study was to develop a classifier able to discriminate between healthy controls and dyspeptic patients by analysis of their electrogastrograms. Fifty-six electrogastrograms were analyzed, corresponding to 42 dyspeptic patients and 14 healthy controls. The original signals were subsampled, filtered and divided into the pre-, post-, and prandial stages. A time-frequency transformation based on wavelets was used to extract the signal characteristics, and a special selection procedure based on correlation was used to reduce their number. The analysis was carried out by evaluating different neural network structures to classify the wavelet coefficients into two groups (healthy subjects and dyspeptic patients). The optimization process of the classifier led to a linear model. A dimension reduction that resulted in only 25% of uncorrelated electrogastrogram characteristics gave 24 inputs for the classifier. The prandial stage gave the most significant results. Under these conditions, the classifier achieved 78.6% sensitivity, 92.9% specificity, and an error of 17.9 ± 6% (with a 95% confidence level). These data show that it is possible to establish significant differences between patients and normal controls when time-frequency characteristics are extracted from an electrogastrogram, with an adequate component reduction, outperforming the results obtained with classical Fourier analysis. These findings can contribute to increasing our understanding of the pathophysiological mechanisms involved in functional dyspepsia and perhaps to improving the pharmacological treatment of functional dyspeptic patients.

The Conceptualization and Exploration of Place Allegiance: Towards a Unified Model of Person-Place Relationships within Outdoor Recreation

The academic study of place has been generally defined by two distinct and highly refined discourses within outdoor recreation research: place attachment and sense of place. Place attachment generally describes the intensity of the place relationship, whereas sense of place approaches place from a more holistic and intimate orientation. This study bridges these two methodological and theoretical separate areas of place research together by re-conceptualizing the way in which place relationships are viewed within outdoor recreation research. The Psychological Continuum Model is used to extend the language of place attachment to incorporate more of the philosophy of sense of place while attending to the empirical strength and utility of place attachment. This extension results in the term place allegiance being coined to depict the strong and profound relationships outdoor recreationists build with their places of outdoor recreation. Using a concurrent mixed methods research design, this study explored place allegiance via an online survey (n = 437) and thirteen in-depth qualitative interviews with outdoor recreationists. Results indicate that place allegiance can be measured through a multi-dimensional model of place allegiance that incorporates behaviours, importance, resistance, knowledge and symbolic value. In addition, place allegiance was found to be related to an individual's influence on life course and his/her willingness to exhibit preservation and protection tendencies. Place allegiance plays an important role in acknowledging the importance of authentic place relationships in an effort to confront placelessness. Wilderness recreation is an important avenue for outdoor recreationists to build strong place relationships.

A unified framework for the comprehension of software's time dimension

Les logiciels sont de plus en plus complexes et leur développement est souvent fait par des équipes dispersées et changeantes. Par ailleurs, de nos jours, la majorité des logiciels sont recyclés au lieu d’être développés à partir de zéro. La tâche de compréhension, inhérente aux tâches de maintenance, consiste à analyser plusieurs dimensions du logiciel en parallèle. La dimension temps intervient à deux niveaux dans le logiciel : il change durant son évolution et durant son exécution. Ces changements prennent un sens particulier quand ils sont analysés avec d’autres dimensions du logiciel. L’analyse de données multidimensionnelles est un problème difficile à résoudre. Cependant, certaines méthodes permettent de contourner cette difficulté. Ainsi, les approches semi-automatiques, comme la visualisation du logiciel, permettent à l’usager d’intervenir durant l’analyse pour explorer et guider la recherche d’informations. Dans une première étape de la thèse, nous appliquons des techniques de visualisation pour mieux comprendre la dynamique des logiciels pendant l’évolution et l’exécution. Les changements dans le temps sont représentés par des heat maps. Ainsi, nous utilisons la même représentation graphique pour visualiser les changements pendant l’évolution et ceux pendant l’exécution. Une autre catégorie d’approches, qui permettent de comprendre certains aspects dynamiques du logiciel, concerne l’utilisation d’heuristiques. Dans une seconde étape de la thèse, nous nous intéressons à l’identification des phases pendant l’évolution ou pendant l’exécution en utilisant la même approche. Dans ce contexte, la prémisse est qu’il existe une cohérence inhérente dans les évènements, qui permet d’isoler des sous-ensembles comme des phases. Cette hypothèse de cohérence est ensuite définie spécifiquement pour les évènements de changements de code (évolution) ou de changements d’état (exécution). L’objectif de la thèse est d’étudier l’unification de ces deux dimensions du temps que sont l’évolution et l’exécution. Ceci s’inscrit dans notre volonté de rapprocher les deux domaines de recherche qui s’intéressent à une même catégorie de problèmes, mais selon deux perspectives différentes.

Réécriture romantique du Moyen Âge, le chevalier transformé et réactualisé

En France, les changements sociaux, culturels et politiques du tournant des XVIIIe et XIXe siècles vont imposer au romantisme naissant une autre base d’inspiration que l’Antiquité qui fut celle du classicisme : le Moyen Âge. Victor et Hugo et Honoré de Balzac feront partie des auteurs romantiques qui adapteront les ressources imaginaires des œuvres médiévales dont la figure du chevalier. Pourquoi les romantiques ont-ils perçu en cette figure une source de sens ? Quels sont les aménagements nécessaires pour qu’une figure aussi liée au Moyen Âge soit réactualisée dans l’esthétique romantique? Cette étude se propose de répondre à ces question en observant la figure du chevalier dans des œuvres médiévales, Le chevalier de la charrette (Chrétien de Troyes) et Le Lancelot en prose (auteur inconnu), comparée au chevalier romantique présenté dans La légende du beau Pécopin et de la belle Bauldour (Victor Hugo) et Le frère d’armes (Honoré de Balzac). Cette comparaison permettra de mettre en lumière que cette figure est représentée dans ces œuvres transformée et actualisée.

Detection of microcalcifications in mammograms using local maxima andadaptive wavelet transform analysis

A method for computer- aided diagnosis of micro calcification clusters in mammograms images presented . Micro calcification clus.eni which are an early sign of bread cancer appear as isolated bright spots in mammograms. Therefore they correspond to local maxima of the image. The local maxima of the image is lint detected and they are ranked according to it higher-order statistical test performed over the sub band domain data

Development of a New Transform:MRT

Fourier transform methods are employed heavily in digital signal processing. Discrete Fourier Transform (DFT) is among the most commonly used digital signal transforms. The exponential kernel of the DFT has the properties of symmetry and periodicity. Fast Fourier Transform (FFT) methods for fast DFT computation exploit these kernel properties in different ways. In this thesis, an approach of grouping data on the basis of the corresponding phase of the exponential kernel of the DFT is exploited to introduce a new digital signal transform, named the M-dimensional Real Transform (MRT), for l-D and 2-D signals. The new transform is developed using number theoretic principles as regards its specific features. A few properties of the transform are explored, and an inverse transform presented. A fundamental assumption is that the size of the input signal be even. The transform computation involves only real additions. The MRT is an integer-to-integer transform. There are two kinds of redundancy, complete redundancy & derived redundancy, in MRT. Redundancy is analyzed and removed to arrive at a more compact version called the Unique MRT (UMRT). l-D UMRT is a non-expansive transform for all signal sizes, while the 2-D UMRT is non-expansive for signal sizes that are powers of 2. The 2-D UMRT is applied in image processing applications like image compression and orientation analysis. The MRT & UMRT, being general transforms, will find potential applications in various fields of signal and image processing.

Unconstrained Handwritten Malayalam Character Recognition using Wavelet Transform and Support vector Machine Classifier

This paper presents the application of wavelet processing in the domain of handwritten character recognition. To attain high recognition rate, robust feature extractors and powerful classifiers that are invariant to degree of variability of human writing are needed. The proposed scheme consists of two stages: a feature extraction stage, which is based on Haar wavelet transform and a classification stage that uses support vector machine classifier. Experimental results show that the proposed method is effective

Quantile based stop-loss transform and its applications

Partial moments are extensively used in actuarial science for the analysis of risks. Since the first order partial moments provide the expected loss in a stop-loss treaty with infinite cover as a function of priority, it is referred as the stop-loss transform. In the present work, we discuss distributional and geometric properties of the first and second order partial moments defined in terms of quantile function. Relationships of the scaled stop-loss transform curve with the Lorenz, Gini, Bonferroni and Leinkuhler curves are developed

Discrete wavelet transform de-noising in eukaryotic gene splicing

This paper compares the most common digital signal processing methods of exon prediction in eukaryotes, and also proposes a technique for noise suppression in exon prediction. The specimen used here which has relevance in medical research, has been taken from the public genomic database - GenBank.Here exon prediction has been done using the digital signal processing methods viz. binary method, EIIP (electron-ion interaction psuedopotential) method and filter methods. Under filter method two filter designs, and two approaches using these two designs have been tried. The discrete wavelet transform has been used for de-noising of the exon plots.Results of exon prediction based on the methods mentioned above, which give values closest to the ones found in the NCBI database are given here. The exon plot de-noised using discrete wavelet transform is also given.Alterations to the proven methods as done by the authors, improves performance of exon prediction algorithms. Also it has been proven that the discrete wavelet transform is an effective tool for de-noising which can be used with exon prediction algorithms

A Unified Framework for Regularization Networks and Support Vector Machines

Regularization Networks and Support Vector Machines are techniques for solving certain problems of learning from examples -- in particular the regression problem of approximating a multivariate function from sparse data. We present both formulations in a unified framework, namely in the context of Vapnik's theory of statistical learning which provides a general foundation for the learning problem, combining functional analysis and statistics.

Applying the Lessons of “Lean Now” to Transform the US Aerospace Enterprise

Lean is common sense and good business sense. As organizations grow and become more successful, they begin to lose insight into the basic truths of what made them successful. Organizations have to deal with more and more issues that may not have anything to do with directly providing products or services to their customers. Lean is a holistic management approach that brings the focus of the organization back to providing value to the customer. In August 2002, Mrs. Darleen Druyun, the Principal Deputy to the Assistant Secretary of the Air Force for Acquisition and government co-chairperson of the Lean Aerospace Initiative (LAI), decided it was time for Air Force acquisitions to embrace the concepts of lean. At her request, the LAI Executive Board developed a concept and methodology to employ lean into the Air Force’s acquisition culture and processes. This was the birth of the “Lean Now” initiative. An enterprise-wide approach was used, involving Air Force System Program Offices (SPOs), aerospace industry, and several Department of Defense agencies. The aim of Lean Now was to focus on the process interfaces between these “enterprise” stakeholders to eliminate barriers that impede progress. Any best practices developed would be institutionalized throughout the Air Force and the Department of Defense (DoD). The industry members of LAI agreed to help accelerate the government-industry transformation by donating lean Subject Matter Experts (SMEs) to mentor, train, and facilitate the lean events of each enterprise. Currently, the industry SMEs and the Massachusetts Institute of Technology are working together to help the Air Force develop its own lean infrastructure of training courses and Air Force lean SMEs. The first Lean Now programs were the F/A-22, Global Hawk, and F-16. Each program focused on specific acquisition processes. The F/A-22 focused on the Test and Evaluation process; the Global Hawk focused on Evolutionary Acquisitions; and the F-16 focused on improving the Contract Closeout process. Through lean, each enterprise made many significant improvements. The F/A-22 was able to reduce its Operational Flight Plan (OFP) Preparation and Load process time of 2 to 3 months down to 7 hours. The Global Hawk developed a new production plan that increases the annual production of its Integrated Sensor Suite from 3 per year to 6 per year. The F-16 enterprise generated and is working 12 initiatives that could result in a contract closeout cycle time reduction of 3 to 7 years. Each enterprise continues to generate more lean initiatives that focus on other areas and processes within their respective enterprises.

A unified approach for representing rows and columns in contingency tables

By using suitable parameters, we present a uni¯ed aproach for describing four methods for representing categorical data in a contingency table. These methods include: correspondence analysis (CA), the alternative approach using Hellinger distance (HD), the log-ratio (LR) alternative, which is appropriate for compositional data, and the so-called non-symmetrical correspondence analysis (NSCA). We then make an appropriate comparison among these four methods and some illustrative examples are given. Some approaches based on cumulative frequencies are also linked and studied using matrices. Key words: Correspondence analysis, Hellinger distance, Non-symmetrical correspondence analysis, log-ratio analysis, Taguchi inertia