Effect of myrrh and thyme on Trichinella spiralisenteral and parenteral phases with inducible nitric oxide expression in mice

Trichinellosis is a serious disease with no satisfactory treatment. We aimed to assess the effect of myrrh (Commiphora molmol) and, for the first time, thyme (Thymus vulgaris L.) against enteral and encysted (parenteral) phases of Trichinella spiralis in mice compared with albendazole, and detect their effect on inducible nitric oxide synthase (iNOS) expression. Oral administration of 500 mg/kg of myrrh and thyme led to adult reduction (90.9%, 79.4%), while 1,000 mg/kg led to larvae reduction (79.6%, 71.3%), respectively. Administration of 50 mg/kg of albendazole resulted in adult and larvae reduction (94.2%, 90.9%). Positive immunostaining of inflammatory cells infiltrating intestinal mucosa and submucosa of all treated groups was detected. Myrrh-treated mice showed the highest iNOS expression followed by albendazole, then thyme. On the other hand, both myrrh and thyme-treated groups showed stronger iNOS expression of inflammatory cells infiltrating and surrounding encapsulated T. spiralis larvae than albendazole treated group. In conclusion, myrrh and thyme extracts are highly effective against both phases of T. spiralis and showed strong iNOS expressions, especially myrrh which could be a promising alternative drug. This experiment provides a basis for further exploration of this plant by isolation and retesting the active principles of both extracts against different stages of T. spiralis.

The Relationship between Media and Political Agendas : Variations across Decision-Making Phases

Previous studies have demonstrated that the extent to which media coverage influences the issue priorities of policy makers is contingent on the type of issue, media, and political agenda. This article contends that the relationship between media and political agendas varies across the phases of the decision-making process. Based on a comprehensive dataset on issue attention in media coverage and various policy-making channels covering the years 1996-2003, the article analyses the level of media coverage and, more importantly, the distribution and correspondence of issue attention between media and political agendas across the four successive phases of the decision-making process (initiation, preparatory, parliamentary, and referendum phases) in Switzerland. Despite inversely distributed levels of attention for successive decision-making phases, both media and political agendas are concentrated on fewer issues in the initiation and referendum phases, and they are more strongly correlated in the most decisive stages of the process, that is, the preparatory and referendum phases.

Delay for admission of unstable hospitalized patients to intensive care unit: a need for a medical emergency team?

INTRODUCTION. Patients admitted in Intensive Care Unit (ICU) from general wards are more severe and have a higher mortality than those admitted from emergency department as reported [1]. The majority of them develop signs of instability (e.g. tachypnea, tachycardia, hypotension, decreased oxygen saturation and change in conscious state) several hours before ICU admission. Considering this fact and that in-hospital cardiac arrests and unexpected deaths are usually preceded by warning signs, immediate on site intervention by specialists may be effective. This gave an impulse to medical emergency team (MET) implementation, which has been shown to decrease cardiac arrest, morbidity and mortality in several hospitals. OBJECTIVES AND METHODS. In order to verify if the same was true in our hospital and to determine if there was a need for MET, we prospectively collected all non elective ICU admissions of already hospitalized patients (general wards) and of patients remaining more than 3 h in emergency department (considered hospitalized). Instability criteria leading to MET call correspond to those described in the literature. The delay between the development of one criterion and ICU admission was registered. RESULTS. During an observation period of 12 months, 321 patients with our MET criteria were admitted to ICU. 88 patients came from the emergency department, 115 from the surgical and 113 from the medical ward. 65% were male. The median age was 65 years (range 17-89). The delay fromMETcriteria development to ICU admission was higher than 8 h in 155 patients, with a median delay of 32 h and a range of 8.4 h to 10 days. For the remaining 166 patients, an early MET criterion was present up to 8 h (median delay 3 h) before ICU admission. These results are quite concordant with the data reported in the literature (ref 1-8). 122 patients presented signs of sepsis or septic shock, 70 patients a respiratory failure, 58 patients a cardiac emergency. Cardiac arrest represent 5% of our collective of patients. CONCLUSIONS.Similar to others observations, the majority of hospitalized patients admitted on emergency basis in our ICU have warning signs lasting for several hours. More than half of them were unstable for more than 8 h. This shows there is plenty of time for early acute management by dedicated and specialized team such as MET. However, further studies are required to determine if MET implementation can reduce in-hospital cardiac arrests and influence the morbidity, the length of stay and the mortality.

Unstable shoes increase energy expenditure of obese patients.

BACKGROUND: Ergonomic unstable shoes, which are widely available to the general population, could increase daily non-exercise activity thermogenesis as the result of increased muscular involvement. We compared the energy expenditure of obese patients during standing and walking with conventional flat-bottomed shoes versus unstable shoes. METHODS: Twenty-nine obese patients were asked to stand quietly and to walk at their preferred walking speed while wearing unstable or conventional shoes. The main outcome measures were metabolic rate of standing and gross and net energy cost of walking, as assessed with indirect calorimetry. RESULTS: Metabolic rate of standing was higher while wearing unstable shoes compared with conventional shoes (1.11 ± 0.20 W/kg(-1) vs 1.06 ± 0.23 W/kg(-1), P=.0098). Gross and net energy cost of walking were higher while wearing unstable shoes compared with conventional shoes (gross: 4.20 ± 0.42 J/kg(-1)/m(-1)vs 4.01 ± 0.39 J/kg(-1)/m(-1), P=.0035; net: 3.37 ± 0.41 J/kg(-1)/m(-1) vs 3.21 ± 0.37 J/kg(-1)/m(-1); P=.032). CONCLUSION: In obese patients, it is possible to increase energy expenditure of standing and walking by means of ergonomic unstable footwear. Long-term use of unstable shoes may eventually prevent a positive energy balance.

Transitions familiales et brouilles conjugales : cumulation ou compensation des problèmes d'intimité à travers les phases du parcours de vie familial ?

Cette étude esquisse, sur la base d'un grand échantillon représentatif et longitudinal de couples vivant en Suisse et du point de vue des femmes ayant répondu à l'enquête, un tableau de l'évolution des problèmes conjugaux rencontrés au cours des différentes phases de la vie familiale. Le processus de dégradation de la relation est reconstitué à partir de 2 mesures faites dans un intervalle de 5 ans. La genèse des difficultés conjugales est considérée à travers le prisme des transitions familiales, en particulier la naissance des enfants, leur entrée à l'école et leur départ du domicile parental. L'analyse révèle le potentiel déstabilisateur de ces transitions pour le couple. Les bouleversements de l'équilibre relationnel évoluent, dans certains cas, vers un cumul de difficultés qui envahissent l'espace conjugal pour déboucher sur une situation rapidement inextricable.

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition. ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Bridging the Faraoni and Selli oceanic anoxic events: late Hauterivian to early Aptian dysaerobic to anaerobic phases in the Tethys

A detailed geochemical analysis was performed on the upper part of the Maiolica Formation in the Breggia (southern Switzerland) and Capriolo sections (northern Italy). The analysed sediments consist of well-bedded, partly siliceous, pelagic carbonate, which lodges numerous thin, dark and organic-rich layers. Stable-isotope, phosphorus, organic-carbon and a suite of redox-sensitive trace-element contents (RSTE: Mo, U, Co, V and As) were measured. The RSTE pattern and C-org:P-tot ratios indicate that most organic-rich layers were deposited under dysaerobic rather than anaerobic conditions and that latter conditions were likely restricted to short intervals in the latest Hauterivian, the early Barremian and the pre-Selli early Aptian. Correlations are both possible with organic-rich intervals in central Italy (the Gorgo a Cerbara section) and the Boreal Lower Saxony Basin, as well as with the facies and drowning pattern in the Helvetic segment of the northern Tethyan carbonate platform. Our data and correlations suggest that the latest Hauterivian witnessed the progressive installation of dysaerobic conditions in the Tethys, which went along with the onset in sediment condensation, phosphogenesis and platform drowning on the northern Tethyan margin, and which culminated in the Faraoni anoxic episode. This episode is followed by further episodes of dysaerobic conditions in the Tethys and the Lower Saxony Basin, which became more frequent and progressively stronger in the late early Barremian. Platform drowning persisted and did not halt before the latest early Barremian. The late Barremian witnessed diminishing frequencies and intensities in dysaerobic conditions, which went along with the progressive installation of the Urgonian carbonate platform. Near the Barremian-Aptian boundary, the increasing density in dysaerobic episodes in the Tethyan and Lower Saxony Basins is paralleled by a change towards heterozoan carbonate production on the northern Tethyan shelf. The following return to more oxygenated conditions is correlated with the second phase of Urgonian platform growth and the period immediately preceding and corresponding to the Selli anoxic episode is characterised by renewed platform drowning and the change to heterozoan carbonate production. Changes towards more humid climate conditions were the likely cause for the repetitive installation of dys- to anaerobic conditions in the Tethyan and Boreal basins and the accompanying changes in the evolution of the carbonate platform towards heterozoan carbonate-producing ecosystems and platform drowning.

Investgiation into Improved Pavement Curing Materials and Techniques: Part 1 - Phases I and II, April 2002

Concrete curing is closely related to cement hydration, microstructure development, and concrete performance. Application of a liquid membrane-forming curing compound is among the most widely used curing methods for concrete pavements and bridge decks. Curing compounds are economical, easy to apply, and maintenance free. However, limited research has been done to investigate the effectiveness of different curing compounds and their application technologies. No reliable standard testing method is available to evaluate the effectiveness of curing, especially of the field concrete curing. The present research investigates the effects of curing compound materials and application technologies on concrete properties, especially on the properties of surface concrete. This report presents a literature review of curing technology, with an emphasis on curing compounds, and the experimental results from the first part of this research—lab investigation. In the lab investigation, three curing compounds were selected and applied to mortar specimens at three different times after casting. Two application methods, single- and double-layer applications, were employed. Moisture content, conductivity, sorptivity, and degree of hydration were measured at different depths of the specimens. Flexural and compressive strength of the specimens were also tested. Statistical analysis was conducted to examine the relationships between these material properties. The research results indicate that application of a curing compound significantly increased moisture content and degree of cement hydration and reduced sorptivity of the near-surface-area concrete. For given concrete materials and mix proportions, optimal application time of curing compounds depended primarily upon the weather condition. If a sufficient amount of a high-efficiency-index curing compound was uniformly applied, no double-layer application was necessary. Among all test methods applied, the sorptivity test is the most sensitive one to provide good indication for the subtle changes in microstructure of the near-surface-area concrete caused by different curing materials and application methods. Sorptivity measurement has a close relation with moisture content and degree of hydration. The research results have established a baseline for and provided insight into the further development of testing procedures for evaluation of curing compounds in field. Recommendations are provided for further field study.

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition (1). ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Evaluation of Composite Pavement Unbonded Overlays: Phases I and II, April 2003

In recent years, thin whitetopping has evolved as a viable rehabilitation technique for deteriorated asphalt cement concrete (ACC) pavements. Numerous projects have been constructed and tested; these projects allow researchers to identify the important elements contributing to the projects’ successes. These elements include surface preparation, overlay thickness, synthetic fiber reinforcement usage, joint spacing, and joint sealing. Although the main factors affecting thin whitetopping performance have been identified by previous research, questions still existed as to the optimum design incorporating these variables. The objective of this research is to investigate the interaction between these variables over time. Laboratory testing and field-testing were planned in order to accomplish the research objective. Laboratory testing involved shear testing of the bond between the portland cement concrete (PCC) overlay and the ACC surface. Field-testing involved falling weight deflectometer deflection responses, measurement of joint faulting and joint opening, and visual distress surveys on the 9.6-mile project. The project was located on Iowa Highway 13 extending north from the city of Manchester, Iowa, to Iowa Highway 3 in Delaware County. Variables investigated included ACC surface preparation, PCC thickness, synthetic fiber reinforcement usage, and joint spacing. This report documents the planning, equipment selection, construction, field changes, and construction concerns of the project built in 2002. The data from this research could be combined with historical data to develop a design specification for the construction of thin, unbonded overlays.

Reverse transcriptase-dependent and -independent phases of infection with mouse mammary tumor virus: implications for superantigen function.

Mouse mammary tumor virus (MMTV) encodes a superantigen (SAg) that promotes stable infection and virus transmission. Upon subcutaneous MMTV injection, infected B cells present SAg to SAg-reactive T cells leading to a strong local immune response in the draining lymph node (LN) that peaks after 6 d. We have used the reverse transcriptase inhibitor 3'-azido-3'-deoxythymidine (AZT) to dissect in more detail the mechanism of SAg-dependent enhancement of MMTV infection in this system. Our data show that no detectable B or T cell response to SAg occurs in AZT pretreated mice. However, if AZT treatment is delayed 1-2 d after MMTV injection, a normal SAg-dependent local immune response is observed on day 6. Quantitation of viral DNA in draining LN of these infected mice indicates that a 4,000-fold increase in the absolute numbers of infected cells occurs between days 2 and 6 despite the presence of AZT. Furthermore MMTV DNA was found preferentially in surface IgG+ B cells of infected mice and was not detectable in SAg-reactive T cells. Collectively our data suggest that MMTV infection occurs preferentially in B cells without SAg involvement and is completed 1-2 d after virus challenge. Subsequent amplification of MMTV infection between days 2 and 6 requires SAg expression and occurs in the absence of any further requirement for reverse transcription. We therefore conclude that clonal expansion of infected B cells via cognate interaction with SAg-reactive T cells is the predominant mechanism for increasing the level of MMTV infection. Since infected B cells display a memory (surface IgG+) phenotype, both clonal expansion and possibly longevity of the virus carrier cells may contribute to stable MMTV infection.

Unstable equilibrium: young adult women in family and career formation in Southern Europe

The paper examines the relationship between family formation (i.e., living with a partner and having children) and women’s occupational career in southern Europe (i.e., Greece, Italy, Portugal and Spain). The relationship is explored by analysing the impact that different family structures and male [nvolvement in caring activities have on women’s early occupational trajectories (i.e., remaining in the same occupational status, experiencing downward or upward mobility, or withdrawing from paid work). This research shows that male involvement in caring activities does not really push women ahead in their career, but the absolute lack of male support seems to negatively affect women’s permanence in paid work. These results apply to all southern European countries except Portugal, where the absolute absence of the partners’ support in caring activities does not seem to alter women’s determination to remain in paid work. The methodology applied consists of the estimation of multinomial logit regression models and the analysis is based on eight waves (1994-2001) of the European Community Household Panel (ECHP).

Imaging of the unstable plaque: how far have we got?

Rupture of unstable plaques may lead to myocardial infarction or stroke and is the leading cause of morbidity and mortality in western countries. Thus, there is a clear need for identifying these vulnerable plaques before the rupture occurs. Atherosclerotic plaques are a challenging imaging target as they are small and move rapidly, especially in the coronary tree. Many of the currently available imaging tools for clinical use still provide minimal information about the biological characteristics of plaques, because they are limited with respect to spatial and temporal resolution. Moreover, many of these imaging tools are invasive. The new generation of imaging modalities such as magnetic resonance imaging, nuclear imaging such as positron emission tomography and single photon emission computed tomography, computed tomography, fluorescence imaging, intravascular ultrasound, and optical coherence tomography offer opportunities to overcome some of these limitations. This review discusses the potential of these techniques for imaging the unstable plaque.