Optical Coalescence and Applications in Cavity Quantum Electrodynamics

We investigate a hitherto largely unexplored regime of cavity quantum electrodynamics in which a highly-reflective element positioned between the end-mirrors of a typical Fabry--P\'erot resonator strongly modifies the cavity response function, such that two longitudinal modes with different spatial parity are brought close to frequency degeneracy. We examine applications of this generic `optical coalescence' phenomenon for the generation of enhanced photon--phonon nonlinearities in optomechanics and atom--photon nonlinearities in cavity quantum electrodynamics with strongly-coupled emitters.

Distributed passive intermodulation generation in coplanar waveguide transmission lines

A phenomenology of distributed passive intermodulation generation in coplanar waveguide transmission line is presented. The theoretical analysis is based upon the generalised nonlinear transmission line model, which accounts for the coupling of two propagating modes. The case of weak substrate nonlinearity is considered and the model is given qualitative verification through the mapping of passive intermodulation products generated in coplanar waveguide fabricated on a commercial laminate. Implications for future research are discussed. © 2012 IEEE.

Parameter study on laser welding of nitinol wire by Taguchi method

A L27 Taguchi experiment was done to investigate the effect of laser power, welding time, laser mode (CW and two pulsed modes), focus position, and their possible interactions on the weld-bead aspect ratio of laser-welded NiTi wires by using a 100W fibre laser. The optimized parameter setting to produce the full penetrated weldment with minimum welding defects is successfully determined in the Taguchi experiment. The laser mode is found to be the most important parameter that directly controls the weld-bead aspect ratio. The focus position is the secondly important parameter for the laser welding of NiTi wires. Strong interaction between the power and focus position is found in the Taguchi experiment. The optimized weldment produced by the Taguchi experiment is mainly of columnar dendritic structure in the weld zone (WZ) with the size of 1-3µm, while the HAZ exhibits equiaxed grain structure with the size of 5-10µm. The Vickers micro-hardness test indicted that the WZ and HAZ in the weldment are softened to certain extends after fibre laser welding.

Type Synthesis of 3-DOF Multi-Mode Translational/Spherical Parallel Mechanisms with Lockable Joints

A 3-DOF (degrees-of-freedom) multi-mode translational/spherical PM (parallel mechanism) with lockable joints is a novel reconfigurable PM. It has both 3-DOF spatial translational operation mode and 3-DOF spherical operation mode. This paper presents an approach to the type synthesis of translational/spherical PMs with lockable joints. Using the proposed approach, several 3-DOF translational/spherical PMs are obtained. It is found that these translational/spherical PMs do not encounter constraint singular configurations and self-motion of sub-chain of a leg during reconfiguration. The approach can also be used for synthesizing other classes of multi-mode PMs with lockable joints, multi-mode PMs with variable kinematic joints, partially decoupled PMs, and reconfigurable PMs with a reconfigurable platform.

Enhanced optomechanical readout using optical coalescence

We present a scheme to strongly enhance the readout sensitivity of the squared displacement of a mobile scatterer placed in a Fabry-Pérot cavity. We investigate the largely unexplored regime of cavity electrodynamics in which a highly reflective element positioned between the end mirrors of a symmetric Fabry-Pérot resonator strongly modifies the cavity response function, such that two longitudinal modes with different spatial parity are brought close to frequency degeneracy and interfere in the cavity output field. In the case of a movable middle reflector we show that the interference in this generic "optical coalescence" phenomenon gives rise to an enhanced frequency shift of the peaks of the cavity transmission that can be exploited in optomechanics. © 2013 American Physical Society.

New SR drive with integrated charging capacity for plug-in hybrid electric vehicles (PHEVs)

Plug-in hybrid electric vehicles (PHEVs) provide much promise in reducing greenhouse gas emissions and, thus, are a focal point of research and development. Existing on-board charging capacity is effective but requires the use of several power conversion devices and power converters, which reduce reliability and cost efficiency. This paper presents a novel three-phase switched reluctance (SR) motor drive with integrated charging functions (including internal combustion engine and grid charging). The electrical energy flow within the drivetrain is controlled by a power electronic converter with less power switching devices and magnetic devices. It allows the desired energy conversion between the engine generator, the battery, and the SR motor under different operation modes. Battery-charging techniques are developed to operate under both motor-driving mode and standstill-charging mode. During the magnetization mode, the machine's phase windings are energized by the dc-link voltage. The power converter and the machine phase windings are controlled with a three-phase relay to enable the use of the ac-dc rectifier. The power converter can work as a buck-boost-type or a buck-type dc-dc converter for charging the battery. Simulation results in MATLAB/Simulink and experiments on a 3-kW SR motor validate the effectiveness of the proposed technologies, which may have significant economic implications and improve the PHEVs' market acceptance

Pressure anisotropy effects on nonlinear electrostatic excitations in magnetized electron-positron-ion plasmas

The propagation of linear and nonlinear electrostatic waves is investigated in a magnetized anisotropic electron-positron-ion (e-p-i) plasma with superthermal electrons and positrons. A two-dimensional plasma geometry is assumed. The ions are assumed to be warm and anisotropic due to an external magnetic field. The anisotropic ion pressure is defined using the double adiabatic Chew-Golberger-Low (CGL) theory. In the linear regime, two normal modes are predicted, whose characteristics are investigated parametrically, focusing on the effect of superthermality of electrons and positrons, ion pressure anisotropy, positron concentration and magnetic field strength. A Zakharov-Kuznetsov (ZK) type equation is derived for the electrostatic potential (disturbance) via a reductive perturbation method. The parametric role of superthermality, positron content, ion pressure anisotropy and magnetic field strength on the characteristics of solitary wave structures is investigated. Following Allen and Rowlands [J. Plasma Phys. 53, 63 (1995)], we have shown that the pulse soliton solution of the ZK equation is unstable to oblique perturbations, and have analytically traced the dependence of the instability growth rate on superthermality and ion pressure anisotropy.

Fiber-optic components for optical communicatios and sensing

Nos últimos anos, a Optoelectrónica tem sido estabelecida como um campo de investigação capaz de conduzir a novas soluções tecnológicas. As conquistas abundantes no campo da óptica e lasers, bem como em comunicações ópticas têm sido de grande importância e desencadearam uma série de inovações. Entre o grande número de componentes ópticos existentes, os componentes baseados em fibra óptica são principalmente relevantes devido à sua simplicidade e à elevada de transporte de dados da fibra óptica. Neste trabalho foi focado um destes componentes ópticos: as redes de difracção em fibra óptica, as quais têm propriedades ópticas de processamento únicas. Esta classe de componentes ópticos é extremamente atraente para o desenvolvimento de dispositivos de comunicações ópticas e sensores. O trabalho começou com uma análise teórica aplicada a redes em fibra e foram focados os métodos de fabricação de redes em fibra mais utilizados. A inscrição de redes em fibra também foi abordado neste trabalho, onde um sistema de inscrição automatizada foi implementada para a fibra óptica de sílica, e os resultados experimentais mostraram uma boa aproximação ao estudo de simulação. Também foi desenvolvido um sistema de inscrição de redes de Bragg em fibra óptica de plástico. Foi apresentado um estudo detalhado da modulação acústico-óptica em redes em fibra óptica de sílica e de plástico. Por meio de uma análise detalhada dos modos de excitação mecânica aplicadas ao modulador acústico-óptico, destacou-se que dois modos predominantes de excitação acústica pode ser estabelecidos na fibra óptica, dependendo da frequência acústica aplicada. Através dessa caracterização, foi possível desenvolver novas aplicações para comunicações ópticas. Estudos e implementação de diferentes dispositivos baseados em redes em fibra foram realizados, usando o efeito acústico-óptico e o processo de regeneração em fibra óptica para várias aplicações tais como rápido multiplexador óptico add-drop, atraso de grupo sintonizável de redes de Bragg, redes de Bragg com descolamento de fase sintonizáveis, método para a inscrição de redes de Bragg com perfis complexos, filtro sintonizável para equalização de ganho e filtros ópticos notch ajustáveis.

Sistema de localização de veículos para smartphone android

Atualmente os sistemas Automatic Vehicle Location (AVL) fazem parte do dia-a-dia de muitas empresas. Esta tecnologia tem evoluído significativamente ao longo da última década, tornando-se mais acessível e fácil de utilizar. Este trabalho consiste no desenvolvimento de um sistema de localização de veículos para smartphone Android. Para tal, foram desenvolvidas duas aplicações: uma aplicação de localização para smarphone Android e uma aplicação WEB de monitorização. A aplicação de localização permite a recolha de dados de localização GPS e estabelecer uma rede piconet Bluetooth, admitindo assim a comunicação simultânea com a unidade de controlo de um veículo (ECU) através de um adaptador OBDII/Bluetooth e com até sete sensores/dispositivos Bluetooth que podem ser instalados no veículo. Os dados recolhidos pela aplicação Android são enviados periodicamente (intervalo de tempo definido pelo utilizador) para um servidor Web No que diz respeito à aplicação WEB desenvolvida, esta permite a um gestor de frota efetuar a monitorização dos veículos em circulação/registados no sistema, podendo visualizar a posição geográfica dos mesmos num mapa interativo (Google Maps), dados do veículo (OBDII) e sensores/dispositivos Bluetooth para cada localização enviada pela aplicação Android. O sistema desenvolvido funciona tal como esperado. A aplicação Android foi testada inúmeras vezes e a diferentes velocidades do veículo, podendo inclusive funcionar em dois modos distintos: data logger e data pusher, consoante o estado da ligação à Internet do smartphone. Os sistemas de localização baseados em smartphone possuem vantagens relativamente aos sistemas convencionais, nomeadamente a portabilidade, facilidade de instalação e baixo custo.

A equidade na indeminização dos danos não patrimoniais

This study examines the quantification of compensation for non-pecuniary damage, awarded by means of judicial decisions based on equity, and seeks to verify whether such calculation safeguards legal certainty and predictability when applying the law, as well as whether it observes the principles of proportionality and equality. Firstly, the limits for discretionary judgment permitted to the judge were determined, by evaluating the criteria established under the law. Then, by examining the grounds of the judicial decisions in cases that had been selected beforehand, this study sought to detect operation modes in concrete considerations of equity used by judges. The examination of the grounds on which these judicial decisions are based permitted the comprehension of the calculation method used in each case and the observation that the criteria of compensatory nature, such as the extent of the damage and the respective consequences, assumed a primary role. Despite discrepancies in viewpoints with regard to certain issues of law, the jurisprudence examined reveals that great care is taken to consider the solutions reached in similar cases, in an attempt to ensure that the different criteria applied in the quantification of compensation are given uniform relevance. The comparison of decisions, reported to cases with similar legal contours, did not reveal relevant discrepancies in the calculation criteria used, nor are they disproportionate regarding the amount of compensation awarded, which means that resorting to equity, in determining the compensation to be awarded due to nonpecuniary damage, does not jeopardize legal certainty or predictability when applying the law, and observes the principle of proportionality, which is anchored in the constitutional principle of equality. The study performed, led to the conclusion that the grounds on which judicial decisions are based, by itemising the elements which are taken into account and the criteria adopted by the judge, allow these to be taken into consideration in similar cases, contributing towards uniform interpretation and application of the law, ensuring legal certainty and predictability when resorting to equity while quantifying compensation.

Integration of olfactory information in a spatial representation enabling accurate arm choice in the radial arm maze

The aim of the present study was to determine whether and how rats can use local olfactory cues for spatial orientation. Rats were trained in an eight-arm radial maze under different conditions as defined by the presence or absence of supplementary olfactory cues marking each arm, the availability of distant visuospatial information, and the illumination of the maze (light or darkness). The different visual conditions were designed to dissociate among the effects of light per se and those of visuospatial cues, on the use of olfactory cues for accurate arm choice. Different procedures with modifications of the arrangement of olfactory cues were used to determine if rats formed a representation of the spatial configuration of the olfactory cues and if they could rely on such a representation for accurate arm choice in the radial maze. The present study demonstrated that the use of olfactory cues to direct arm choice in the radial arm maze was critically dependent on the illumination conditions and implied two different modes of processing of olfactory information according to the presence or the absence of light. Olfactory cues were used in an explicit manner and enabled accurate arm choice only in the absence of light. Rats, however, had an implicit memory of the location of the olfactory cues and formed a representation of the spatial position of these cues, whatever the lighting conditions. They did not memorize the spatial configuration of the olfactory cues per se but needed these cues to be linked to the external spatial frame of reference.

The design of a reflectance spectrometer and its calibration using SrTiO3 /

A new Ultra-High Vacuum (UHV) reflectance spectrometer was successfully designed, making use of a Janis Industries ST-400 sample cryostat, IR Labs bolometer, and Briiker IFS 66 v/S spectrometer. Two of the noteworthy features include an in situ gold evaporator and internal reference path, both of which allow for the experiment to progress with a completely undisturbed sample position. As tested, the system was designed to operate between 4.2 K and 325 K over a frequency range of 60 - 670 cm~^. This frequency range can easily be extended through the addition of appUcable detectors. Tests were performed on SrTiOa, a highly ionic incipient ferroelectric insulator with a well known reflectance. The presence and temperatmre dependence of the lowest frequency "soft" mode were measured, as was the presence of the other two infrared modes. During the structural phase transition from cubic to tetragonal perovskite, the splitting of the second phonon mode was also observed. All of the collected data indicate good agreement with previous measurements, with a minor discrepency between the actual and recorded sample temperatures.

3-O-Demethylation of thebaine and the synthesis of a flacourtia aglycone from benzoic acid.

Two synthetic projects were embarked upon, both fraught with protecting group nuance and reaction selectivity. Transformations of the opiate skeleton remain a valuable tool for the development of new medicines. Thebaine, a biosynthetic intermediate in the expression of morphine, was converted in three steps to oripavine through two parallel modes. Through the use of protecting group manipulations, two irreversible scaffold rearrangements were avoided during aryl methyl ether bond cleavage. This chemistry constitutes a new path in manipulations of the morphinan scaffold through protective groups. A new compound family, the flacourtosides, contains an unusual cyclohexenone fragment. The newly described compounds show in preliminary tests antiviral activity against dengue and chikungunya. This aglycone was approached on three pathways, all beginning with the chemoenzymatic dihydroxylation of benzoic acid. A first attempt from a known vinyl epoxide failed to epimerize and cooperate under deprotective conditions. A second and third attempt made use of a diastereoselective dihydroxylation reaction, which was critical in reaching the correct stereochemistry and oxidation state. The methyl ester of the aglycone was prepared, constituting the first synthesis of the non-trivial natural product framework.

Synthesis of new zirconium complexes

L'étude suivante décrit la synthèse des ligands nacnacxylH, nacnacBnH, nacnacR,RH et nacnacCyH en utilisant une méthode générale qui implique des rendements élevés et des coûts raisonnables, la complexation de ces ligands au Zr, la caractérisation de ces complexes et l’investigation de leurs réactivités. Les complexes de zirconium ont été obtenus en utilisant deux méthodes synthétiques principales : la première consiste en traitement du sel de lithium du ligand avec le ZrCl4. La seconde est la réaction du ligand neutre avec les complexes d’alkyl-zirconium(IV) par protonation de l'alkyle coordonné. Le ligand adopte deux modes de coordination avec le Zr. Une coordination 2 est observée dans les complexes octaèdriques contenant un ou deux ligands nacnac. En présence d'un autre ligand ayant une coordonnation 5, par exemple Cp ou Ind, le ligand nacnac se trouve en coordination x avec le centre métallique de zirconium. En solution, les complexes obtenus de (nacnac)2ZrX2 montrent un comportement dynamique via un « Bailar-twist » et les paramètres d'activation de cette isomérisation ont été obtenus. Le complexe octaèdrique (nacnacBn)2ZrCl2, 2c, n'a pas montré de réactivité dans la carbozirconation et son alkylation n'était pas possible par l’échange des chlorures avec les alkyles. L’analogue dimethylé (nacnacBn)2ZrMe2, 2d, peut être préparé par alkylation du ZrCl4 avant la complexation du ligand. Ce dernier a été prouvé aussi de ne pas être réactif dans la carbozirconation.

Analyse d’implantation d’un système de gestion intégrée en environnement et en santé et sécurité du travail

Les systèmes de gestion intégrée en environnement et en santé et sécurité du travail (SGI) sont un nouveau paradigme de gestion dans les organisations modernes. Ces systèmes sont construits à partir des normes ISO 14001 et d’OHSAS 18001, basées sur la prévention des risques et le principe de précaution. La littérature sur les SGI témoigne d’un marasme conceptuel prédominant depuis plus de 10 ans; elle insiste sur l’urgence d’un consensus taxinomique et conceptuel afin de définir les systèmes de gestion intégrée et de différencier le mécanisme d’intégration de celui de l’implantation. Cette lacune conceptuelle enlise les connaissances dans un fossé épistémologique, retardant ainsi le débat dans ce nouveau champ d’études. Les rares connaissances dont nous disposons dans ce domaine proviennent de quelques études théoriques et de six études empiriques, toutes préoccupées par la compatibilité des multiples systèmes et des avantages économiques de leur intégration. Les évidences engendrées par ces études sont insuffisantes pour appréhender la dynamique du nouveau paradigme dont les effets demeurent peu connus. Cette situation révèle l’urgence d’agir dans un contexte où l’utilisation des SGI se multiplie, et où leur tendance à minimiser l’importance des risques devient de plus en plus préoccupante. Aucune étude ne s’est encore penchée sur l’implantation d’un SGI en environnement et en santé et sécurité du travail construit uniquement à partir des normes ISO 14001 et d’OHSAS 18001. Cette connaissance est importante pour expliquer les effets de tels systèmes. C’est dans cette perspective que nous avons réalisé cette première étude empirique d’un SGI selon les normes ISO 14001 et d’OHSAS 18001. Nos questions de recherche portent sur le mode, le degré d’implantation, les effets du SGI, ainsi que sur les facteurs contextuels qui interviennent pour expliquer les variations dans le degré d’implantation et les effets du SGI. Il s’agit d’une recherche à prélèvement qualitatif qui repose sur un devis d’étude de cas, avec des niveaux d’analyse imbriqués, et comportant une double visée descriptive et explicative. Notre échantillon, de type raisonné, regroupait trente-cinq intervenants provenant de différentes instances hiérarchiques ; il incluait également des représentants syndicaux. Notre échantillon était composé de 7 usines, accréditées aux normes ISO 14001, OHSAS 18001, et dispersées dans différentes villes du Québec. Ces usines différaient tant par leur technologie, leur âge, leur taille, et leurs types de production. Nos données ont été recueillies en 2004; elles sont basées sur des entrevues semi dirigées, sur des observations directes lors de la visite des lieux; elles s’appuient aussi sur des consultations de documents internes et sur des outils électroniques implantés. La transcription des entrevues effectuée, le contenu des discours a été catégorisé selon les cinq dimensions du SGI: engagement, planification, mise en opération, contrôle et revue de la direction. Une condensation horizontale avait précédé l’analyse de chaque cas et l’analyse transversale des cas selon une approche à la fois inductive et déductive. Les résultats de notre recherche ont révélé deux modes d’implantation : le mode d’enrichissement et le mode de fusion. Ces modes dépendaient de la nature des structures fonctionnelles en place. La visée d’amélioration continue à la base du SGI n’avait pas réussi à concilier les approches traditionnelles bottom up et top down qui ont dominé cette implantation; son mécanisme était guidé par 4 types de stratégies : l’économie des ressources, le contrôle des forces d’influences, la stratégie des fruits faciles à cueillir et la stratégie à petits pas. Pour analyser le degré d’implantation, nous avons tenu compte de l’effort de structuration du SGI et de la force d’utilisation des processus implantés à chacune des cinq dimensions du SGI. Les résultats de notre recherche révèlent une variabilité certaine du degré d’implantation entre les usines d’une part, et entre les processus associés aux cinq dimensions du SGI d’autre part. L’analyse des discours a permis de produire cinq hypothèses qui soutiennent l’effort de structuration et la force d’utilisation du SGI: (i) l’hypothèse de la force de cohésion, (ii) l’hypothèse de la spécificité du processus, (iii) l’hypothèse de la portée du processus, (iv) l’hypothèse de la capacité organisationnelle, (v) l’hypothèse de l’acceptation du changement. L’implantation du SGI était soumise à l’influence de multiples facteurs; ils étaient de nature politique, structurelle et organisationnelle. Ces facteurs avaient agi sur le processus d’implantation en amorçant une cascade d’interactions au cours desquelles leurs forces d’influences se renforçaient, se neutralisaient ou s’additionnaient pour affecter le degré d’implantation. Les facteurs facilitant touchaient surtout l’effort de structuration ; ils incluaient : l’expérience des systèmes de gestion, l’implication de la direction, celle du syndicat ou du CSS, la structure organisationnelle, le niveau d’éducation, l’âge et la taille de l’usine. Quant aux facteurs contraignants, ils agissaient sur la force d’utilisation ; ils incluaient : la lourdeur procédurale, le manque de temps, le manque de formation, le manque de ressources, la culture organisationnelle, la structure organisationnelle, le fossé intergénérationnel, l’absence du syndicat et l’âge de l’usine. Trois effets proximaux escomptés par l’entreprise ont été observés. (i) La rigueur de la gestion était associée à l’application des exigences du SGI; elle touchait la gouvernance en environnement et en santé et sécurité du travail, les mécanismes de gestion et les procédés de production. (ii) La standardisation était reliée au mode d’implantation du SGI; elle concernait les pratiques, les outils, les méthodes de travail et l’organisation des ressources. (iii) La rupture des silos est un effet relié au mode d’implantation du SGI; elle touchait les structures départementales, les frontières professionnelles, les relations et climat de travail. Ces effets proximaux avaient provoqué plusieurs effets émergents, plus distaux: une augmentation du pouvoir de contrôle syndical, un renforcement de la légitimité des recommandations soumises par les spécialistes professionnels, la création de réseaux inter organisationnels et le transfert du savoir. L’implantation du SGI avait transformé la gouvernance et les pratiques en environnement et en santé et sécurité du travail dans les sept usines. Toutefois, elle ne semblait pas garantir l’immunité du processus de gestion des risques à l’environnement ni à la santé et sécurité du travail. Sa capacité à diluer les risques devait retenir l’attention des politiques de santé publiques et des programmes de prévention des risques à l’environnement et à la santé et sécurité du travail. L’amélioration de la gestion des risques demeurait un effet attendu non observé et soumis à des facteurs contextuels qui pourraient l’empêcher de se concrétiser. À cet égard, le transfert du savoir, renforcé par l’émergence des réseaux inter organisationnels, semblait offrir une avenue beaucoup plus prometteuse et accessible. C’est l’une des contributions de cette recherche. Elle a aussi (i) proposé une typologie des modes d’implantation et des effets du SGI (ii) préconisé une méthode détaillée d’une meilleure appréciation du degré d’implantation (iii) précisé le rôle des facteurs contextuels dans l’explication des variations du degré d’implantation et dans la production des effets, (iv) proposé des hypothèses sur la structuration et l’utilisation du SGI (v) offert une perspective plurielle et approfondie de la dynamique de l’implantation du SGI grâce à la variété de l’échantillon des répondants et des usines. Il s’agit de la première étude de terrain dans le domaine. À notre connaissance, aucune autre étude n’a eu de tels résultats. Mots Clés : ISO 14001, OHSAS 18001, gestion intégrée, environnement, santé et sécurité du travail, risques environnementaux, risques en santé et sécurité du travail, analyse d’implantation, degré d’implantation, SGI, transfert du savoir.