The effect of heat transfer mode on heart rate responses and hysteresis during heating and cooling in the estuarine crocodile Crocodylus porosus

The effect of heating and cooling on heart rate in the estuarine crocodile Crocodylus porosus was studied in response to different heat transfer mechanisms and heat loads. Three heating treatments were investigated. C. porosus were: (1) exposed to a radiant heat source under dry conditions; (2) heated via radiant energy while half-submerged in flowing water at 23degreesC and (3) heated via convective transfer by increasing water temperature from 23degreesC to 35degreesC. Cooling was achieved in all treatments by removing the heat source and with C. porosus half-submerged in flowing water at 23degreesC. In all treatments, the heart rate of C. porosus increased markedly in response to heating and decreased rapidly with the removal of the heat source. Heart rate during heating was significantly faster than during cooling at any given body temperature, i.e. there was a significant heart rate hysteresis. There were two identifiable responses to heating and cooling. During the initial stages of applying or removing the heat source, there was a dramatic increase or decrease in heart rate ('rapid response'), respectively, indicating a possible cardiac reflex. This rapid change in heart rate with only a small change or no change in body temperature (

Modeling diffraction in free-space optical interconnects by the mode expansion method

Free-space optical interconnects (FSOIs), made up of dense arrays of vertical-cavity surface-emitting lasers, photodetectors and microlenses can be used for implementing high-speed and high-density communication links, and hence replace the inferior electrical interconnects. A major concern in the design of FSOIs is minimization of the optical channel cross talk arising from laser beam diffraction. In this article we introduce modifications to the mode expansion method of Tanaka et al. [IEEE Trans. Microwave Theory Tech. MTT-20, 749 (1972)] to make it an efficient tool for modelling and design of FSOIs in the presence of diffraction. We demonstrate that our modified mode expansion method has accuracy similar to the exact solution of the Huygens-Kirchhoff diffraction integral in cases of both weak and strong beam clipping, and that it is much more accurate than the existing approximations. The strength of the method is twofold: first, it is applicable in the region of pronounced diffraction (strong beam clipping) where all other approximations fail and, second, unlike the exact-solution method, it can be efficiently used for modelling diffraction on multiple apertures. These features make the mode expansion method useful for design and optimization of free-space architectures containing multiple optical elements inclusive of optical interconnects and optical clock distribution systems. (C) 2003 Optical Society of America.

Large sets of large sets of Steiner triple systems of order 9

We describe a direct method of partitioning the 840 Steiner triple systems of order 9 into 120 large sets. The method produces partitions in which all of the large sets are isomorphic and we apply the method to each of the two non-isomorphic large sets of STS(9).

A class B switch-mode assisted linear amplifier

A switch-mode assisted linear amplifier (SMALA) combining a linear (Class B) and a switch-mode (Class D) amplifier is presented. The usual single hysteretic controlled half-bridge current dumping stage is replaced by two parallel buck converter stages, in a parallel voltage controlled topology. These operate independently: one buck converter sources current to assist the upper Class B output device, and a complementary converter sinks current to assist the lower device. This topology lends itself to a novel control approach of a dead-band at low power levels where neither class D amplifier assists, allowing the class B amplifier to supply the load without interference, ensuring high fidelity. A 20 W implementation demonstrates 85% efficiency, with distortion below 0.08% measured across the full audio bandwidth at 15 W. The class D amplifier begins assisting at 2 W, and below this value, the distortion was below 0.03%. Complete circuitry is given, showing the simplicity of the additional class D amplifier and its corresponding control circuitry.

Cartografando movimentos curriculares produzidos nas redes de conversações nos encontrosformações do PROEJA/IFES/ES

Problematiza a constituição do currículo (e da “formação docente” no campo curricular), no cotidiano escolar, na dimensão das conversações. Objetiva acompanhar os movimentos curriculares concernentes ao Proeja entre formas e forças complexas no cotidiano do Ifes – campus Venda Nova do Imigrante (VNI). Compõe com as linhas de pensamentos principalmente de Alves (2008, 2010, 2012); Carvalho (2004, 2008a, 2008b, 2009, 2012); Deleuze (1988, 2002, 2010); Deleuze e Guattari (1995); Ferraço (2007, 2008a, 2008b); Garcia (2011); Guattari (1987, 2004, 2012); Kastrup (2009, 2013); Lopes e Macedo (2011); Lopes (2010, 2011); Oliveira (2005, 2009, 2012); Paiva (2004, 2009); Rolnik (1989); e Spinoza (2013), entremeando os conceitos de movimentos e afetos no campo do currículo em redes na relação híbrida com os encontros-formações docente do/no Proeja. Adota a (não) metodologia cartográfica ao acompanhar movimentos curriculares (des)(re)territorializantes nas redes de conversações, especialmente nos encontrosformações: “Rodas de conversas com professores e demais servidores do Proeja”. Utiliza como principais instrumentos metodológicos a observação participante, a gravação das vozes e o registro em diário de campo. Contribui para outros movimentos de pesquisa ao capturar produzir e analisar dados em que se percebe que: ainda que tenha ocorrido um planejamento coletivo, outras temáticas surgiram nos encontros formações (que não se pretendiam engessados e não objetivavam a paralisação dos fluxos que pedem passagem), e tais assuntos puderam ser usados como disparadores para criação de outros movimentos curriculares; as concepções dos professores sobre a “dificuldade/facilidade” em ministrar aulas para o Proeja e os lugares estabelecidos entre estudantes e docentes no processo ensino-aprendizagem não estão relacionados diretamente, em relação de causa e efeito, à disciplina/área de conhecimento específica que ministram, mas aos agenciamentos, aos ligamentos e às rupturas produzidas nas relações com essas redes de saberes fazeres poderes que envolvem múltiplos agentes: docentes, outros servidores, alunos, experiências e encontros múltiplos dentro fora no espaço tempo do Ifes; uma tríade-refrão coopera para a criação de uma fôrma triangular que enfatiza a noção de um padrão em um processo molar enraizado nas árvores do conhecimento: perfil, seleção e nivelamento, contudo, algumas linhas de fuga dissonantes são criadas por entre as fissuras dos pretensos tons harmônicos; as frases “os professores do IF não estão preparados para ministrar aulas para o Proeja” ou “não há formação/qualificação para os docentes se relacionarem com o Proeja” são utilizadas, em alguns discursos, como escudos-argumentos para a opção-política de não oferta de vagas para a modalidade EJA em composição com fios que afirmam tal especificidade da educação básica, dentro da rede federal, como um “favor social”; processos que envolvem a (des)organização da matriz curricular são considerados por alguns participantes como início, “produto” e objetivo das conversas curriculares e provocam tensões que (i)mobilizam, (não) movimentam entre os afetos dos corpos, podendo levar à (não) ação coletiva; a noção de “mercado de trabalho” ainda impera nos discursos, ciclicamente, enquanto início fim das problematizações do currículo do Ensino Médio e da EJA; a expressão “integração curricular” é constantemente usada nos discursos que circulam o campus, no entanto, os sentidos produzidos, as concepções e as teorias curriculares que embasam a noção de “integração” no currículo são bem diversos; não há totalidades nos discursos, não há homogeneização, não foi efetivada nenhuma coesão/única voz representante (e esse também não era o objetivo desta pesquisa); ainda que o tema da roda se propusesse às conversas curriculares do/no Proeja, nesses encontros, os participantes manifestaram a necessidade de intensificar os movimentos produzidos nas rodas visando à discussão dos currículos textos de todos os cursos e modalidades ofertados pelos campus VNI e na intensificação de espaços para trocas de experiências curriculares cotidianas; na potencialização das diferenças como possibilidades de inventividade nos encontros-formações docente e nas danças curriculares que envolvem diversas relações de aprendizagem no Ifes, algumas experimentações foram produzidas, entre afetos, criando composições(des)(re)territorializantes e ressonando com movimentos que não se restringiram às rodas de conversas, contudo, enredaram-se em fios de outros espaços tempos do campus em tentativas de propagações de currículos multidão.

El efecto de la triple hélice en los resultados de innovación

La innovación está relacionada con el crecimiento de las economías y de las empresas, y en un entorno cambiante como el actual, se presenta como una herramienta fundamental para conseguir ventajas competitivas. Esta investigación tiene por objetivo analizar la relación existente entre la capacidad de innovación de las empresas y la obtención de información de las mismas a través de la cooperación con competidores, proveedores, Universidades y otras instituciones públicas (Triple Hélice). En primer lugar se desarrolla una revisión bibliográfica de los conceptos relacionados para posteriormente, a través del método de ecuaciones estructurales, dar respuesta y aceptar la hipótesis propuesta que pone de manifiesto la relación existente entre los resultados de innovación de las empresas y la información obtenida de la Triple Hélice. La investigación se realiza con una muestra de empresas españolas, encuestadas por el Instituto Nacional de Estadística (INE), durante los años 2008-2010.

n-Hexane hydroisomerisation over bifunctional Pt/MCM-22 catalysts. Influence of the mode of Pt introduction

Three different methods were used to introduce 1.0 wt.% of Pt in bifunctional Pt/MCM-22 zeolite catalysts: ion exchange with Pt(NH3)(4)(2+), incipient wetness impregnation with PtCl6H2 and mechanical mixture with Pt/Al2O3. The Pt dispersion was estimated by transmission electron microscopy and the hydrogenating activity with toluene hydrogenation at 110 degrees C. From these experiments, it can be concluded that with the ion exchanged sample, platinum was located within the inner micropores and on the outer surface, whereas with the impregnated one, platinum was essentially on the outer surface under the form of large particles. With all the samples there is a fast initial decrease in the activity for n-hexane hydroisomerisation at 250 degrees C. With exchanged and impregnated samples, this decrease is followed by a plateau, the activity value being then higher with impregnated sample. For the sample prepared by mechanical mixture a continuous decrease in activity can be observed. All these differences can be related with the distinct locations of Pt.

Stability Condition Based Sliding Mode Modulators for Multilevel Power Converters

Sliding mode controllers for power converters usually employ hysteresis comparators to directly generate the power semiconductors switching states. This paper presents a new sliding mode modulator based on the direct implementation of the sliding mode stability condition, which for multilevel power converters shows advantages, as branch equalized switching frequencies and less distortion on the ac currents when operating near the rated converter power. The new sliding mode multilevel modulator is used to control a three-phase multilevel converter, operated as a reactive power compensator (STATCOM), implementing the stability condition in a digital signal processing system. The performance of this new sliding mode modulator is compared with a multilevel modulator based on hysteresis comparators. Simulation and experimental results are presented in order to highlight the system operation and control robustness.

Low Complexity Intra Mode Selection for Efficient Distributed Video Coding

Motion compensated frame interpolation (MCFI) is one of the most efficient solutions to generate side information (SI) in the context of distributed video coding. However, it creates SI with rather significant motion compensated errors for some frame regions while rather small for some other regions depending on the video content. In this paper, a low complexity Infra mode selection algorithm is proposed to select the most 'critical' blocks in the WZ frame and help the decoder with some reliable data for those blocks. For each block, the novel coding mode selection algorithm estimates the encoding rate for the Intra based and WZ coding modes and determines the best coding mode while maintaining a low encoder complexity. The proposed solution is evaluated in terms of rate-distortion performance with improvements up to 1.2 dB regarding a WZ coding mode only solution.

Multi-stage evolution of a sub-aerial volcanic ridge over the last 1.3 Myr: S. Jorge Island, Azores Triple Junction

New K/Ar dating and geochemical analyses have been carried out on the WNW-ESE elongated oceanic island of S. Jorge to reconstruct the volcanic evolution of a linear ridge developed close to the Azores triple junction. We show that S. Jorge sub-aerial construction encompasses the last 1.3 Myr, a time interval far much longer than previously reported. The early development of the ridge involved a sub-aerial building phase exposed in the southeast end of the island and now constrained between 1.32 +/- 0.02 and 1.21 +/- 0.02 Ma. Basic lavas from this older stage are alkaline and enriched in incompatible elements, reflecting partial melting of an enriched mantle source. At least three differentiation cycles from alkaline basalts to mugearites are documented within this stage. The successive episodes of magma rising, storage and evolution suggest an intermittent reopening of the magma feeding system, possibly due to recurrent tensional or trans-tensional tectonic events. Present data show a gap in sub-aerial volcanism before a second main ongoing building phase starting at about 750 ka. Sub-aerial construction of the S. Jorge ridge migrated progressively towards the west, but involved several overlapping volcanic episodes constrained along the main WNW-ESE structural axis of the island. Malic magmas erupted during the second phase have been also generated by partial melting of an enriched mantle source. Trace element data suggest, however, variable and lower degrees of partial melting of a shallower mantle domain, which is interpreted as an increasing control of lithospheric deformation on the genesis and extraction of primitive melts during the last 750 kyr. The multi-stage development of the S. Jorge volcanic ridge over the last 1.3 Myr has most likely been greatly influenced by regional tectonics, controlled by deformation along the diffuse boundary between the Nubian and the Eurasian plates, and the increasing effect of sea-floor spreading at the Mid-Atlantic Ridge.

Study of Pt/MCM-22 based catalysts in the transformation of n-hexane: effect of rare earth elements and mode of platinum introduction

The bifunctional transformation of n-hexane was carried out over Pt/MCM-22 based catalysts. MCM-22 was synthesized and submitted to ion exchange with rare earth nitrate solutions of La, Nd and Yb, followed by Pt introduction. Three different methods were used to introduce about 1 wt% of Pt in the zeolite: ion exchange, incipient wetness impregnation and mechanical mixture with Pt/Al(2)O(3). The bifunctional catalysts were characterized by transmission electron microscopy and by the model reaction of toluene hydrogenation. These experiments showed that, in the ion exchanged sample, Pt is located both within the inner micropores and on the outer surface, whereas in the impregnated one, the metal is essentially located on the outer surface under the form of large particles. The presence of RE elements increases the hydrogenating activity of Pt/MCM-22 since the location of these species at the vicinity of metal particles causes modification on its electronic properties. Whatever the mode of Pt introduction, a fast initial decrease in conversion is observed for n-hexane transformation, followed by a plateau related to the occurrence of the catalytic transformations at the hemicages located at the outer surface of the crystals. The effect of rare earth elements on the hydrogenating function leads to a lower selectivity in dibranched isomers and increased amounts of light products.

ß-Lactams: chemical structure, mode of action and mechanisms of resistance

This synopsis summarizes the key chemical and bacteriological characteristics of β-lactams, penicillins, cephalosporins, carbanpenems, monobactams and others. Particular notice is given to first-generation to fifth-generation cephalosporins. This review also summarizes the main resistance mechanism to antibiotics, focusing particular attention to those conferring resistance to broad-spectrum cephalosporins by means of production of emerging cephalosporinases (extended-spectrum β-lactamases and AmpC β-lactamases), target alteration (penicillin-binding proteins from methicillin-resistant Staphylococcus aureus) and membrane transporters that pump β-lactams out of the bacterial cell.

Framework de controlo de acessos para Triple-stores com interface Sail API

Grande parte dos triples-stores são open source e desenvolvidos em Java, disponibilizando interfaces standards e privadas de acesso. A grande maioria destes sistemas não dispõe de mecanismos de controlo de acessos nativos, o que dificulta ou impossibilita a sua adopção em ambientes em que a segurança dos factos é importante (e.g. ambiente empresarial). Complementarmente observa-se que o modelo de controlo de acesso a triplos e em particular a triplos descritos por ontologias não está standardizado nem sequer estabilizado, havendo diversos modelos de descrição e algoritmos de avaliação de permissões de acesso. O trabalho desenvolvido nesta tese/dissertação propõe um modelo e interface de controlo de acesso que permite e facilite a sua adopção por diferentes triple-stores já existentes e a integração dos triples-stores com outros sistemas já existentes na organização. Complementarmente, a plataforma de controlo de acesso não impõe qualquer modelo ou algoritmo de avaliação de permissões, mas pelo contrário permite a adopção de modelos e algoritmos distintos em função das necessidades ou desejos. Finalmente demonstra-se a aplicabilidade e validade do modelo e interface propostos, através da sua implementação e adopção ao triple-store SwiftOWLIM já existente, que não dispõe de mecanismo de controlo de acessos nativo.

10 kVp rule – An anthropomorphic pelvis phantom imaging study using a CR system: impact on image quality and effective dose using AEC and manual mode

Purpose - This study aims to investigate the influence of tube potential (kVp) variation in relation to perceptual image quality and effective dose (E) for pelvis using automatic exposure control (AEC) and non-AEC in a Computed Radiography (CR) system. Methods and materials - To determine the effects of using AEC and non-AEC by applying the 10 kVp rule in two experiments using an anthropomorphic pelvis phantom. Images were acquired using 10 kVp increments (60–120 kVp) for both experiments. The first experiment, based on seven AEC combinations, produced 49 images. The mean mAs from each kVp increment were used as a baseline for the second experiment producing 35 images. A total of 84 images were produced and a panel of 5 experienced observers participated for the image scoring using the two alternative forced choice (2AFC) visual grading software. PCXMC software was used to estimate E. Results - A decrease in perceptual image quality as the kVp increases was observed both in non-AEC and AEC experiments, however no significant statistical differences (p > 0.05) were found. Image quality scores from all observers at 10 kVp increments for all mAs values using non-AEC mode demonstrates a better score up to 90 kVp. E results show a statistically significant decrease (p = 0.000) on the 75th quartile from 0.37 mSv at 60 kVp to 0.13 mSv at 120 kVp when applying the 10 kVp rule in non-AEC mode. Conclusion - Using the 10 kVp rule, no significant reduction in perceptual image quality is observed when increasing kVp whilst a marked and significant E reduction is observed.

Image quality and dose analysis for a PA chest X-ray: comparison between AEC mode acquisition and manual mode using the 10 kVp ‘rule’

Purpose - To compare the image quality and effective dose applying the 10 kVp rule with manual mode acquisition and AEC mode in PA chest X-ray. Method - 68 images (with and without lesions) were acquired using an anthropomorphic chest phantom using a Wolverson Arcoma X-ray unit. These images were compared against a reference image using the 2 alternative forced choice (2AFC) method. The effective dose (E) was calculated using PCXMC software using the exposure parameters and the DAP. The exposure index (lgM provided by Agfa systems) was recorded. Results - Exposure time decreases more when applying the 10 kVp rule with manual mode (50%–28%) when compared with automatic mode (36%–23%). Statistical differences for E between several ionization chambers' combinations for AEC mode were found (p = 0.002). E is lower when using only the right AEC ionization chamber. Considering the image quality there are no statistical differences (p = 0.348) between the different ionization chambers' combinations for AEC mode for images with no lesions. Considering lgM values, it was demonstrated that they were higher when the AEC mode was used compared to the manual mode. It was also observed that lgM values obtained with AEC mode increased as kVp value went up. The image quality scores did not demonstrate statistical significant differences (p = 0.343) for the images with lesions comparing manual with AEC mode. Conclusion - In general the E is lower when manual mode is used. By using the right AEC ionising chamber under the lung the E will be the lowest in comparison to other ionising chambers. The use of the 10 kVp rule did not affect the visibility of the lesions or image quality.