Helix-coil-transition in solid polypeptides

Abstract Poly(L-glutamic acid) (PLGA) was synthesized by living anionic ring-opening polymerization of the NCA monomer, which was obtained by reacting diphosgene with an amino acid derivative. The chemical structures and thermal properties were characterized by 1H-NMR, 13C-NMR, TGA and DSC. XRD powder patterns found to be amorphous for all polymers obtained. The molecular weights could be determined under severe limitations due to low solubility and high aggregation tendency. The secondary structure of the PLGA films was analyzed in the solid state by IR spectroscopy; the order was determined mainly by XRD. Uniform bulk films (1-5 µm) were produced by drop-casting of PLGA solutions in TFA on silica. The XRD film analysis indicated the absence of a long range order or an orientation even if a helical microstructure was confirmed by IR spectroscopy. The coil solvent TFA delivered constantly a helical or a β-sheet structure in the solid state depending on the water content of the solvent which was observed for the first time to exhibit a high influence on the crystallization process for PLGA. Temperature dependent in-situ IR measurements were examined to analyze if a helix-coil transition occurs, but there could be no solvent system determined, which resulted in a disordered coil structure in the solid state. General parameters like solvent systems, evaporation conditions, concentration, substrates etc. were analyzed. New crystallizations were obtained on silica prepared by drop-casting of solutions of PLGA in DMF, DMA, TMU, NMP, and pyridine/water mixtures, respectively. PSCBC in DMF, CDCl3/TFA-d, and PSBC in CDCl3/TFA-d exhibited the same crystalline diffraction patterns like PLGA. The long range order in the X-ray diffraction pattern is proven by extremely sharp crystalline signals, which are not changing the shape or the position of the peak by increasing the temperature up to 160°C. The substrate seems to play a decisive role because the crystalline structures were not obtainable on glass. The crystal structure consists probably of two different layered structures based on the intensity ratios of the two series of crystalline signals in the X-ray diffraction patterns. The source of the layered structure remains unclear and needs further studies to investigate the spatial arrangement of the chains in more detail. The secondary structure was still not changing upon heating even if a highly crystalline diffraction pattern occurs. Concluding that even the newly investigated crystallization did not show a helix-coil transition in the solid state by annealing, the phenomenon known in solution has to be claimed as unachievable in the solid state based on the results of this work. A remaining open question represents the observation that the same crystalline pattern can be reproducibly prepared with exhibiting two different ordered secondary structures (helix and β-sheet). After the investigation that the evaporation time cannot be decisive for the crystal growth, the choice of a strong hydrogen bonding interrupting solvent is most probably the key to support and induce the crystallization process.

Simulation study of joint transition and Weibull survival model with shared parameters

This study investigates a theoretical model where a longitudinal process, that is a stationary Markov-Chain, and a Weibull survival process share a bivariate random effect. Furthermore, a Quality-of-Life adjusted survival is calculated as the weighted sum of survival time. Theoretical values of population mean adjusted survival of the described model are computed numerically. The parameters of the bivariate random effect do significantly affect theoretical values of population mean. Maximum-Likelihood and Bayesian methods are applied on simulated data to estimate the model parameters. Based on the parameter estimates, predicated population mean adjusted survival can then be calculated numerically and compared with the theoretical values. Bayesian method and Maximum-Likelihood method provide parameter estimations and population mean prediction with comparable accuracy; however Bayesian method suffers from poor convergence due to autocorrelation and inter-variable correlation. ^

Ab initio calculations of Ca III Stark broadening parameters,transition probabilities and radiative lifetimes

We have determined matrix elements for all experimental configurations of Ca III, including the 3s3p63d configuration. These values have been obtained using intermediate coupling (IC). For these IC calculations, we have used the standard method of least-squares fitting from the experimental energy levels, using the computer code developed by Robert Cowan. In this paper, using these matrix elements, we report the calculated values of the Ca III Stark widths and shifts for 148 spectral lines, of 56 Ca III spectral line transition probabilities and of eight radiative lifetimes of Ca III levels. The Stark widths and shifts, calculated using the Griem semi-empirical approach, correspond to the spectral lines of Ca III and are presented for an electron density of 1017 cm?3 and temperatures T = 1.0?10.0 (×104 K). The theoretical trends of the Stark broadening parameter versus the temperature are presented for transitions that are of astrophysical interest. There is good agreement between our calculations, for transition probabilities and radiative lifetimes, and the experimental values presented in the literature. We have not been able to find any values for the Stark parameters in the references.

Thermodynamic parameters for the helix-coil transition of oligopeptides: molecular dynamics simulation with the peptide growth method.

The helix-coil transition equilibrium of polypeptides in aqueous solution was studied by molecular dynamics simulation. The peptide growth simulation method was introduced to generate dynamic models of polypeptide chains in a statistical (random) coil or an alpha-helical conformation. The key element of this method is to build up a polypeptide chain during the course of a molecular transformation simulation, successively adding whole amino acid residues to the chain in a predefined conformation state (e.g., alpha-helical or statistical coil). Thus, oligopeptides of the same length and composition, but having different conformations, can be incrementally grown from a common precursor, and their relative conformational free energies can be calculated as the difference between the free energies for growing the individual peptides. This affords a straightforward calculation of the Zimm-Bragg sigma and s parameters for helix initiation and helix growth. The calculated sigma and s parameters for the polyalanine alpha-helix are in reasonable agreement with the experimental measurements. The peptide growth simulation method is an effective way to study quantitatively the thermodynamics of local protein folding.

Relative transition probability and pressure broadening parameters of copper atomic lines /

Inserted Report documentation page designates D. W. Boyer ... [et al.] as "authors."

Unveiling temporal correlations characteristic of a phase transition in the output intensity of a fiber laser

We use advanced statistical tools of time-series analysis to characterize the dynamical complexity of the transition to optical wave turbulence in a fiber laser. Ordinal analysis and the horizontal visibility graph applied to the experimentally measured laser output intensity reveal the presence of temporal correlations during the transition from the laminar to the turbulent lasing regimes. Both methods unveil coherent structures with well-defined time scales and strong correlations both, in the timing of the laser pulses and in their peak intensities. Our approach is generic and may be used in other complex systems that undergo similar transitions involving the generation of extreme fluctuations.

Investigating optical complexity of the phase transition in the intensity of a fibre laser radiation

Fibre lasers have been shown to manifest a laminar-to-turbulent transition when increasing its pump power. In order to study the dynamical complexity of this transition we use advanced statistical tools of time-series analysis. We apply ordinal analysis and the horizontal visibility graph to the experimentally measured laser output intensity. This reveal the presence of temporal correlations during the transition from the laminar to the turbulent lasing regimes. Both methods allow us to unveil coherent structures with well defined time-scales and strong correlations both, in the timing of the laser pulses and in their peak intensities.

Analysis of the aerobic-anaerobic transition in elite cyclists during incremental exercise with the use of electromyography

To investigate the validity and reliability of surface electromyography (EMG) as a new non-invasive determinant of the metabolic response to incremental exercise in elite cyclists. The relation between EMG activity and other more conventional methods for analysing the aerobic-anaerobic transition such as blood lactate measurements (lactate threshold (LT) and onset of blood lactate accumulation (OBLA)) and ventilatory parameters (ventilatory thresholds 1 and 2 (VT1 and VT2)) was studied.Twenty eight elite road cyclists (age 24 (4) years; VO2MAX 69.9 (6.4) ml/kg/min; values mean (SD)) were selected as subjects. Each of them performed a ramp protocol (starting at 0 W, with increases of 5 W every 12 seconds) on a cycle ergometer (validity study). In addition, 15 of them performed the same test twice (reliability study). During the tests, data on gas exchange and blood lactate levels were collected to determine VT1, VT2, LT, and OBLA. The root mean squares of EMG signals (rms-EMG) were recorded from both the vastus lateralis and the rectus femoris at each intensity using surface electrodes. Results - A two threshold response was detected in the rms-EMG recordings from both muscles in 90% of subjects, with two breakpoints, EMG(T1) and EMG(T2), at around 60-70% and 80-90% of VO2MAX respectively. The results of the reliability study showed no significant differences (p > 0.05) between mean values of EMG(T1) and EMG(T2) obtained in both tests. Furthermore, no significant differences (p > 0.05) existed between mean values of EMG(T1), in the vastus lateralis and rectus femoris, and VT1 and LT (62.8 (14.5) and 69.0 (6.2) and 64.6 (6.4) and 68.7 (8.2)% of VO2MAX respectively), or between mean values of EMG(T2), in the vastus lateralis and rectus femoris, and VT2 and OBLA (86.9 (9.0) and 88.0 (6.2) and 84.6 (6.5) and 87.7 (6.4)% of VO2MAX respectively). Rms-EMG may be a useful complementary non-invasive method for analysing the aerobic-anaerobic transition (ventilatory and lactate thresholds) in elite cyclists.

Determination of subclinical metabolic disorders in transition dairy cows

Das Gesundheitsmanagement von Milchkühen hat in den vergangenen Jahren auf den landwirtschaftlichen Betrieben an Bedeutung gewonnen. Neben Präventionsmaßnahmen zur Gesunderhaltung der Tiere ist die frühzeitige und systematische Erkennung von Erkrankungen hierbei der Hauptbestandteil. Es zeigt sich vermehrt, dass vor allem Transitkühe verstärkt an Stoffwechselerkrankungen in sowohl klinischer als auch subklinischer Form erkranken. Letztere stellen ein hohes Risiko dar, zum einen weil subklinische Erkrankungen oftmals nur schwer oder gar nicht erkannt werden und zum anderen, weil sie in vielen Fällen die Grundlage für meist schwerwiegendere Folgeerkrankungen sind. In der vorliegenden Studie wird das Thema der Früherkennung von subklinischen Ketosen und der subakuten Pansenazidose behandelt. Verschiedene Methoden wurden unter praktischen Versuchsbedingungen auf ihre Tauglichkeit zur Krankheitserkennung hin geprüft. In einer ersten Studie wurde auf einem konventionellen Milchviehbetrieb ein Ketose-Monitoring bei frischlaktierenden Kühen ab Tag 3 postpartum durchgeführt. Insgesamt 15 Tiere waren an einer subklinischen Ketose erkrankt, was eine Aufkommensrate von 26% in den untersuchten Tieren bedeutete. Die Blutproben von insgesamt 24 Tieren wurden auf ihren IL-6-Gehalt untersucht. Von den untersuchten Tieren waren 14 Tiere erkrankt, 10 Tiere bildeten die gesunde Kontrollgruppe. Interleukin-6 wurde bestimmt, da dem Zytokin IL-6 in anderen Studien in Bezug auf Ketosen eine Rolle zugesprochen wurde. Die erwartete Erhöhung von IL-6 bei erkrankten Tieren konnte nicht festgestellt werden; die erkrankten Kühe zeigten vielmehr die niedrigsten IL-6 Werte der Studiengruppe. Insgesamt waren die IL-6 Konzentrationen auf einem niedrigen Niveau mit 27.2 pg/m l± 10.2. Es zeigte sich, dass die IL-6 Bestimmung im Blut hinsichtlich der Erkennung von subklinischen Ketosen nur eingeschränkt nutzbar ist. Es konnte ausschließlich eine schwache negative Korrelation zwischen Beta- Hydroxybutyrat (BHBA, Goldstandard für den Nachweis einer Ketose) und IL-6 detektiert werden. Zusätzlich zu den Blutanalysen wurde ebenfalls die tägliche Wiederkauaktivität mit dem „DairyCheck“ System bestimmt, welches kontinuierlich die charakteristischen Kaumuskelkontraktionen aufzeichnet und somit die Dauer des Wiederkäuens bestimmt werden kann. Es wurde geprüft, ob sich ketotische Tiere von nicht ketotischen Tieren hinsichtlich der täglichen Wiederkäuzeit unterscheiden. Milchkühe mit einer Ketose kauten im Schnitt 475 min/d ± 56 wieder, nach Genesung 497 min/d ± 48. Sie befanden sich somit im Durchschnitt immer unterhalb der gesunden Kontrollgruppe, welche 521 min/d ± 76 wiederkaute. Eine Korrelation zwischen der Wiederkauzeit und dem BHBA- Gehalt im Blut war nur sehr schwach ausgeprägt, nicht zuletzt da die Tiere generell eine hohe Variabilität in der Wiederkauaktivität zeigten. Bei einer weiteren Studie, ebenfalls auf einem Praxisbetrieb durchgeführt, wurde auf die Erkennung der subakuten Pansensazidose (SARA) fokussiert. Hierbei kam ein drahtloses, kommerziell verfügbares Bolussystem zum Einsatz, welches den pH Wert kontinuierlich im Retikulorumen misst. Es macht die Erkennung einer SARA auch unter Praxisbedingungen ohne invasive Methoden wie der Punktion möglich. Das Bolussystem wurde 24 Milchkühen kurz vor der Abkalbung oral eingegeben, um den pH-Wert während der gesamten Transitphase messen und überwachen zu können. Während in der Trockenstehphase nur vereinzelte SARA Fälle auftraten, erlitt ein Großteil der untersuchten Tiere in der Frühlaktation eine SARA. Auf Grundlage von pH-Werten von laktierenden Milchkühen, wurde zusätzlich eine Sensitivitätsanalyse von verschieden, bereits eingesetzten Nachweismethoden durchgeführt, um die Tauglichkeit für die SARA-Diagnostik zu untersuchen. Es handelte sich hierbei zum einen um einen SARA-Nachweis unter Heranziehung von Einzelwerten, Fress- und Wiederkäuzeiten, sowie ausgewählten Milchinhaltsstoffen und der Milchmenge. Die Analyse ergab, dass nahezu alle Nachweismethoden im Vergleich zur Langzeitmessung nur eingeschränkt zur SARA-Diagnostik nutzbar sind. In einem weiteren Teil der Studie wurde eine Kotfraktionierung bei den gleichen Tieren durchgeführt, um damit SARA-Tiere auch mittels der Kotanalyse erkennen kann. Es konnte gezeigt werden, dass zum einen die Ration einen Einfluss auf die Kotzusammensetzung hat (Trockensteherration versus Ration für Laktierende) zum anderen aber auch, dass eine SARA die Zusammensetzung des Kotes verändert. Hierfür wurden Kotproben ausschließlich von laktierenden Kühen untersucht, sodass der Einfluss der Ration ausgeschlossen werden konnte. Erhöhte Faseranteile im Kot von SARA - Kühen gaben Hinweis auf eine verminderte Verdaulichkeit. Dabei erwies sich vor allem die Hemizellulose als guter Parameter, um auf eine SARA schließen zu können. Die Versuchsbedingungen ließen es ebenfalls zu, die pH-Verläufe der Tiere in der Frühlaktation zu untersuchen. Eine Clusteranalyse von pH-Werten der ersten 12 Tage postpartum zeigte, dass die untersuchten Tiere trotz gleicher Haltungs- und Fütterungsbedingungen unterschiedliche pH-Wert Verläufe entwickelten. So gab es eine Gruppe von Milchkühen, die den pH-Wert stabil halten konnte, während die restlichen pH-Abfälle in verschiedenen Verläufen und Intensitäten aufzeigten. Es konnte ebenfalls aufgezeigt werden, dass Tiere innerhalb der Testherde unterschiedliche Schweregrade der SARA entwickelten. Auch in dieser Studie wurde deutlich, dass Tiere scheinbar unterschiedliche Möglichkeiten haben, auf ihre Umwelt zu reagieren, bzw. suboptimalen Bedingungen entgegenwirken zu können. Zusammengefasst wurden verschiedene Methoden zur Ketose- und SARA- Erkennung geprüft, von denen nur einzelne für die Praxis zu empfehlen sind. Die Variabilität der Tiere, sowohl bei der Ausprägung der Erkrankungen als auch bei den gemessenen Parametern verdeutlicht die Notwendigkeit, diese im Herden- und Gesundheitsmanagement in Zukunft stärker zu berücksichtigen.

A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures

For certain continuum problems, it is desirable and beneficial to combine two different methods together in order to exploit their advantages while evading their disadvantages. In this paper, a bridging transition algorithm is developed for the combination of the meshfree method (MM) with the finite element method (FEM). In this coupled method, the meshfree method is used in the sub-domain where the MM is required to obtain high accuracy, and the finite element method is employed in other sub-domains where FEM is required to improve the computational efficiency. The MM domain and the FEM domain are connected by a transition (bridging) region. A modified variational formulation and the Lagrange multiplier method are used to ensure the compatibility of displacements and their gradients. To improve the computational efficiency and reduce the meshing cost in the transition region, regularly distributed transition particles, which are independent of either the meshfree nodes or the FE nodes, can be inserted into the transition region. The newly developed coupled method is applied to the stress analysis of 2D solids and structures in order to investigate its’ performance and study parameters. Numerical results show that the present coupled method is convergent, accurate and stable. The coupled method has a promising potential for practical applications, because it can take advantages of both the meshfree method and FEM when overcome their shortcomings.

Transition of synthetic chromium oxide gel to crystalline chromium oxide : a hot stage Raman spectroscopic study

Chromium oxide gel material was synthesised and appeared to be X-ray amorphous. The changes in the structure of the synthetic chromium oxide gel were investigated using hot-stage Raman spectroscopy based upon the results of thermogravimetric analysis. The thermally decomposed product of the synthetic chromium oxide gel in nitrogen atmosphere was confirmed to be crystalline Cr2O3 as determined by the hot-stage Raman spectra. Two bands were observed at 849 and 735 cm-1 in the Raman spectrum at 25 °C, which were attributed to the symmetric stretching modes of O-CrIII-OH and O-CrIII-O. With temperature increase, the intensity of the band at 849 cm-1 decreased, while the band at 735 cm-1 increased. These changes in intensity are attributed to the loss of OH groups and formation of O-CrIII-O units in the structure. A strongly hydrogen bonded water H-O-H bending band was found at 1704 cm-1 in the Raman spectrum of the chromium oxide gel, however this band shifted to around 1590 cm-1 due to destruction of the hydrogen bonds upon thermal treatment. Six new Raman bands were observed at 578, 540, 513, 390, 342 and 303 cm-1 attributed to the thermal decomposed product Cr2O3. The use of the hot-stage Raman microscope enabled low-temperature phase changes brought about through dehydration and dehydroxylation to be studied.