Eficiência de diferentes ramais de pulverização e volumes de calda no controle de Brevipalpus phoenicis na cultura do café

Efficiency of different spraying lances and spraying volumes on the control of Brevipalpus phoenicis in coffee crops. The mite Brevipalpus phoenicis is found on coffee plantations in Brazil since the 1950's. Responsible for indirect losses due to its role as vector of a virus disease, this mite species often requires control measures, the most common based on mitecide spraying. It was evaluated the mortality of B. phoenicis due the coverage of spraying liquid applied on coffee plants, with two types of lances used in air assisted sprayers and four spraying. volumes. Treatments were applied with mitecide abamectin (Vertimec 18 CE (R) at 0.4 L per hectare), in volumes of 250, 400, 550 and 700 L per hectare, with two types of lances for the nozzles. The control efficiency against B. phoenicis, deposition and coverage by spray liquid on coffee plants was evaluated. Experimental delineation was in randomized blocks, with eight treatments plus a check plot in four replications. The statistical analysis was carried in a factorial scheme 2x4+1. No significant differences in the number of mites were found between treatments. As regards spraying liquid deposition, it was observed an increment with increasing spraying volumes, with the plant tops showing the best deposition of spraying liquid. The duplication of the lances (nozzle branches) resulted in a significant increase in control efficiency for B. phoenicis compared with conventional branch and with check plot, without dependence of spraying volume.

Uma contribuição à definição de indicadores de desempenho de instituições federais de educação tecnológica do Brasil na abordagem do balanced scorecard

This Master of Science Thesis deals with a study on applying the BSC Balanced Scorecard to assess the performance of Federal Centers for Technological Education Institution in Brazil, the CEFET s (Centro Federal de Educação Tecnológica), government organizations non for profit. It s accomplished a literature review in order to understand the BSC and its application to non for profit organizations and as a main result it is proposed a BSC conceptual model with an inversion of the main BSC perspective from financial to customer/society. Taking the FORPLAN/CONCEFET performance indicators matrix it is developed a set of performance indicators for the two tops perspective in the conceptual model proposed five for customer/society perspective and three for financial/budget perspective. A field survey with ten CEFET s General Directors is conducted to validate the indicators and assess the perception of the Directors on the hierarchy of the conceptual model, and a hierarchy among the indicators as well. The main results suggests that the indicators are validated, that most of the Directors support the hierarchy presented in the conceptual model but 30% of them have a traditional model with financials coming first. In terms of indicator hierarchy, there s a slight priority for the student unitary cost among the financial perspective indicators, and a relative balance among the customer/society perspective indicators

Permian stromatolites associated with bivalve coquina beds-Angatuba, SP, Brazil (Teresina Formation, Parana Basin)

Silicified stromatolites have been described in the Permian Teresina Formation, Passa Dois Group, of the Parana Basin. These stromatolites occur as blocks in the Fazenda Monte Alegre area at the headwaters of the creek known as Corrego Catanduva in the municipality of Angatuba. These blocks originate from the Serra de Angatuba region and were recognized in a road that was cut in the midst of sandstones and siltites. The stromatolites are isolated bioherms that are domed to subspherical with a flat base in profile and a rounded to lenticular shape in plan view. The stromatolites exhibit a reddish coloration and are composed of microcrystalline quartz. Lamination is continuous, non-columnar, and anastomosed, showing parallel to divergent growth; however, divergent columns also occur, especially at the tops of the bioherms. The lamination is fine and well preserved, with alternating light and dark laminas. Microfossils of filamentous cyanobacteria are preserved and were related to the genera Microcoleus and Rivularia. Silicified bivalves occur in association with the stromatolites and are preserved in the form of coquina beds and rare isolated specimens within the bioherms. The described specimens belong to the Pinzonella illusa biozone, with representatives of the species Pinzonella illusa, Angatubia cowperesioides, and Houldausiella elongata. The formation environment of these stromatolites is associated with tidal plains of shallow, brackish, relatively calm, warm waters of good luminosity with the presence of weak currents. There was likely a low level of predation, and the environment may have been hypersaline. The coquina beds associated with the stromatolites indicate a probable proximal tempestite, i.e., they were formed near the coastline. The stromatolites were originally composed of carbonates, although these were replaced by silica during early diagenesis.

Environmental factors influencing the transmission of Haemonchus contortus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Deglaciation sequences in the Permo-Carboniferous Itarare Group, Parana Basin, southern Brazil

The Late Carboniferous-Early Permian Itarare Group is a thick glacial unit of the Parana Basin. Five unconformity-bounded sequences have been defined in the eastern outcrop belt and recognized in well logs along 400 km across the central portion of the basin. Deglaciation sequences are present in the whole succession and represent the bulk of the stratigraphic record. The fining-upward vertical facies succession is characteristic of a retrogradational stacking pattern and corresponds to the stratigraphic record of major ice-retreat phases. Laterally discontinuous subglacial tillites and boulder beds occur at the base of the sequences. When these subglacial facies are absent, deglaciation sequences lie directly on the basal disconformities. Commonly present in the lowermost portions of the deglaciation sequences, polymictic conglomerates and cross-bedded sandstones are generated in subaqueous proximal outwash fans in front of retreating glaciers. The overlying assemblage of diamictites, parallel-bedded and rippled sandstones, and Bouma-like facies sequences are interpreted as deposits of distal outwash fan lobes. The tops of the deglaciation sequences are positioned in clay-rich marine horizons that show little (fine-laminated facies with dropstones) or no evidence of glacial influence on the deposition and likely represent periods of maximum ice retreat. (c) 2006 Elsevier Ltd. All rights reserved.

Calagem e adubação com vermicomposto de lixo urbano na produção e nos teores de metais pesados em alface

Foram realizados dois experimentos em casa de vegetação para avaliar o efeito da adição de um vermicomposto oriundo de lixo urbano e da calagem na matéria seca e na concentração de metais pesados na parte aérea de plantas de alface cv. Mesa 659. em um dos ensaios, foi usado um Latossolo Vermelho distroférrico e, em outro, um Argissolo Vermelho-Amarelo eutrófico. O delineamento experimental de cada experimento foi em blocos ao acaso, em esquema fatorial 5 x 5, com quatro repetições, combinando-se calagem para elevar a saturação por bases a 40; 50; 60; 70 e 80%, e o equivalente a 0; 25; 50; 75 e 100 t ha-1 de vermicomposto. Uma única aplicação de vermicomposto de lixo urbano, em doses acima de 50 t ha-1, limitou a produção de alface nos dois tipos de solos. Mesmo estas doses que restringiram a produção da alface, não a tornaram imprópria para consumo humano do ponto de vista da concentração de metais pesados.

Association of two new Coryphasia species (Araneae, Salticidae) with tank-bromeliads in southeastern Brazil: Habitats and patterns of host plant use

Two allopatric species of Coryphasia (Araneae: Salticidae), both described for the first time in this study, have been found associated with Bromeliaceae in distinct phytophysiognomies (e.g., inselbergs, highland forests and restingas) from southeastern Brazil. In this study, we investigated whether these salticids were associated specifically with bromeliads, and whether they used bromeliads of different species and sizes in distinct geographic regions. The Coryphasia species were rarely found outside bromeliads, occupied larger bromeliad species among those available, and were generally more frequent on bromeliads in open areas, such as inselbergs on mountain tops. The two Coophasia species were observed submerging in phytotelmata, possibly as an anti-predatory behavior. The patterns of spatial and microspatial distribution and the submergence behavior of these species were similar to those of other bromeliad-dwelling salticids, which suggests a convergence among spiders that live on bromeliads.

Windrowing and prismatic baling of sugar cane vegetal residues: Some operational parameters and energetic efficiency

It was evaluated the energetic efficiency and operational parameters of a windrowing and prismatic baling, both from CASE NEW HOLLAND® operations in sugarcane vegetal residues (green leaves, dry leaves and tops) picked mechanically in green cane. The area belongs to COSTA PINTO MILL (COSAN® Group) which was harvested mechanically by combines in the State of Sao Paulo, Brazil. The geographic location of the area is: Latitude 22°40'30S, Longitude 47°36'38W and Altitude of 605m. The variety was RB 82-5336, planted in 1.40m row spacing, with 78t.ha-1 yield. The vegetal residues analysis obtained 69.93% of leaves, 21.44% of stalks fractions, 2.27% of tops and 6.36% of total strange matter. The vegetal residues values were: gross heat of 18.43MJ.kg-1, low heat of 17.00MJ.kg'1 and useful heat of 12.94MJ.kg-1. The vegetal residues average energetic potential was 342.48GJ.ha-1. The treatments were simple, double and triple windrowing. The use of the rake and prismatic baler to pick up the residues was viable. The simple windrowing treatment presented the best results: effective capacity of 83.06t.ha-1, fuel consumption of 0.18L.t -1 and 99.95% of positive energetic efficiency. The bales obtained in the treatment of triple windrowing presented the largest specific mass average of 221.11kg.m-3. The soil amount in the bales increased with successive windrowing. The baling operation in the triple windrowing treatment obtained better results, presenting the effective capacities of 20.29t.h -1 and 1.45ha.h-1 and fuel consumption of for baled in 1.37L.t-1. The high total energetic efficiency of 99.53% indicates that is technically viable the withdrawal of the vegetal residues.

The sugar cane vegetal residues unloaded in the sugar mill: Operational costs and physical characteristics

Brazil produced in 2002/03 season 317.87×106tons of sugar cane stalks and 36.88×106tons of vegetal residues (green leaves, dry leaves and tops) in a planted area of 4.61×106 hectares (ha). These residues have a useful heat of 3,613.14Mcal.t-1. Currently most of this biomass is burned as a pre-harvest practice. The doubt persists in the system type that it must be adopted to pick up, load, transport and unload this biomass at the sugar mill boilers. This study analyzed 22 variables related to operational costs and physical characteristics of these residues in a field situation using a JOHN DEERE® 6850 forage harvester with two different treatments: T1 and T2 (two types of rakes) with 6 repetitions each one. The geographic location of the studied area that belongs to COSTA PINTO MILL (COSAN® Group) is: Latitude 22°40'30S and Longitude 47°36'38W. The adopted methodology was proposed by Ripoli et al. (2002). The obtained results at a 5% level of significance showed that both treatments did not differed significantly between them. Some of the results were, where EBP stands for Oil Equivalent Barrel: Windrowing (T1=US$0.17.EBP-1 and US$9.59.ha-1, T2=US$0.08.EBP-1 and US$4.27.ha-1); Pick up (T1=US$1.31.EBP-1 and US$44.29.ha-1, T2 =US$1.37.EBP-1 and US$48.36.ha-1); Transportation (T1=US$1.27.EBP-1 and US$14,30.ha -1, T2=US$1.33.EBP-1 and US$14,80.ha -1), Unloading at the sugar mill (T1=US$0.30.EBP-1 and US$3.39.ha-1, T2=US$0.32.EBP-1 and US$3.51.ha-1); Total (T1=US$3.05.EBP-1 and US$71.57.ha-1, T2=US$3.10.EBP-1 and US$70.94.ha-1). Confronting the obtained data with the ones in the bibliography, this system revealed itself more expensive than the baling system or the integral harvest system using combines.

Windrowing and cylindrical baling of sugar cane vegetal residues: Some operational parameters and energetic efficiency

The objective of this study was to analyze the sugar cane vegetal residues collection, as well as determining its energetic potential, using a rake and cylindrical baler, both from NEW HOLLAND® under two different windrowing process (simple and double). The field tests were carried out in an area that belongs to COSTA PINTO MILL (COSAN® Group) in the city of Piracicaba, Sao Paulo State, Brazil. The geographic location of the area is: Latitude 22°4030'S, Longitude 47°3633'W and altitude of 605m. From the trash analysis, before the baling, the following average results were obtained: 69.93% of leaves; 2.27% of stalks fractions; 21.44% of tops and 6.36% of total strange matter. The estimated residues yield was 27.01 tons.ha -1 with a gross heat of 18.43 MJ.kg-1, low heat of 17.01 MJ.kg-1, useful heat of 13.32 MJ.kg-1, average moisture of 20.76% and an energetic potential of 494,875.09 MJ.ha-1. In the windrowing operations (simple and double) the averages of the 5 out of 13 analyzed variable presented differences between them in a 1% level of significance in the Tukey Test. The averages comparison of the results for bale's specific mass and the effective capacities (ton.h-1) e (ha.h-1) had been significant at a 5% level in the Tukey Test. The comparisons of the averages for the results had been significant to 1% level. The strange matter averages of the bales did not differed between them.

Endophytic yeasts and filamentous fungi associated with southern Brazilian apple (Malus domestica) orchards subjected to conventional, integrated or organic cultivation

Endophytic fungi were isolated from leaves, flowers and fruit of healthy apple trees (Malus domestica, BORKH.) growing in southern Brazilian orchards under three different cultivation systems (conventional, integrated and organic), during two vegetative cycles. The greatest total number of endophytic isolates was obtained from the orchards under organic cultivation when compared to integrated and conventional cultivation systems. Filamentous fungi from the genera Colletotrichum, Xylaria and Botryosphaeria were the most frequent ones and the most representative yeast genera were Sporobolomyces, Rhodotorula, Debaryomyces and Cryptococcus. It is suggested that some isolates may be used as indicators of the different management systems. © 2005 Wiley-VCH Verlag GmbH & Co. KGaA.

Desenvolvimento de três cultivares de mangueira sobre quatro porta-enxertos

The experiment was conducted at the physics structure of the Rio Grande do Norte State Farming Research Company (EMPARN) in Açu-RN, with the objective of evaluate the behavior of grafts-holder cultivates in the plants formation of cultivates used as tops. The experimental design was randonizated blocks in the factorial outline 3 x 4, with 3 repetitions. The analyzed factors were four cultivates of grafts-holder and three cultivates of grafts. As grafts-holders were used the cultivates Carabao and Manga d'agua, originated at the Campinas Agrarian Institute, and the cultivates Rosinha and Espada, obtained from the EMPARN collection. The cultivates used as tops were Tommy Atkins, Van Dyke and Keitt, with the fork that were also obtained at EMPARN. In a period of six months was observed the diameters of the grafts-holder, grafts and hight of the plants. The Cultivar Manga d'agua, as a graft-holder, provided the smallest growing to the mango tree and the Cultivar Tommy Atkins, used as graft, was the one who presented the tallest hight.

Facies sedimentares e ambientes deposicionais da Formação Barbalha no vale do cariri, bacia do araripe, nordeste do Brasil

The Aptian Barbalha Formation represents the first unit of the post-rift sequence of the Araripe Basin and crops out at the slopes of the Aranpe plateau in the eastern part ot Aranpe Basin. The unit has also been named Kio da Batateira Formation, but this name is here used in its original definition as Batateira Beds, an interval of great lateral continuity and characterized by the presence of bituminous shales of the Alagoas Stage (P-270 palynological biozone). This paper presents the results of a stratigraphic analysis carried out along the outcrop belt in order to establish the facies architecture and to interpret deposicional environments of the siliciclastic Barbalha Formation. Detailed stratigraphic vertical sections were measured and correlated. They allowed the recognition of two depositional sequences characterized by fining upward arrangement of facies, beginning with fluvial deposits and ending with lacustrine deposits at their tops. The end of the first cycle is represented by black shales and brecciated limestones of the Batateira Beds that record a geologic event of regional magnitude and serve as meaningful long-distance stratigraphic mark. The second deposicional sequence overlies disconformably the Batateira Beds and begins with clast-supported conglomerates, which are covered by a succession of fluvial sandstones and minor intervals of pelitic rocks. The sandstone content diminishes towards the top and the upper part of the unit is characterized by the presence of ostracode-rich green shales. The Barbalha Formation is conformably overlaid by Late Aptian lacustrine limestones belonging to the Crato Member of the Santana Formation.

Paleosuperfícies e perfis bauxíticos no Planalto de Poços de Caldas, São Paulo/Minas Gerais, Brasil

This work has the objective of correlating altitude with the bauxite profiles in the Poços de Caldas Plateau in order to identify paleosurfaces. Then, bauxite profiles found in the Plateau have been classified and mapped through DEM. Three different types of bauxite profiles are highlighted in the area: (1) Rim Profiles which are well-developed and thick and are located in the areas of highest altitude in the Plateau; (2) Plateau Profiles which are not very thick and very clayey, normally appear in the lower portion of the landscape; (3) Reworked Profiles, characterized by bauxite reworked fragments composed by similar materials found in the tops of Rim and Plateau Profiles. After relating altitude to the constituting materials of the bauxite profiles, it is noticed that there are occurrences of Rim Bauxite Profiles located in altitudes of Plateau Profiles and Reworked Profiles located over Rim Profiles, above 1,400 meters of altitude. In the opposite direction, tops of the same elevation are found, where there should be Rim Profiles, there are rocky outcrops observed in field, without any evidence of laterite profiles. It is concluded, therefore, that the elevation rates by themselves, at least in this area, are not good enough references to determine the existence and distribution of paleosurfaces.

Population structure and canopy use by Coussapoa microcarpa, a strangler hemiepiphyte from the Brazilian Atlantic Forest

We studied density, size structure, and establishment sites of Coussapoa microcarpa in the Brazilian Atlantic rain forest. This species is a hemiepiphyte that begins its life in the tops of trees and survives the death of its host to become a free-standing tree. All individuals of C. microcarpa already rooted in the ground were recorded in a 3.43 ha (1.75 ha in lowland and 1.68 ha in submontane) sample of forest plots. Data on total height, root diameter at breast height, host height and diameter at breast height, as well as height, type and diameter of the establishment site were collected. Coussapoa microcarpa present a high density (36.5 ind. ha-1) and the population studied was composed mainly of young individuals. Young and adults differed in establishment sites. The diameter of establishment sites of young was narrower than the diameter of establishment sites of adults, which points out to a limiting factor (diameter of establishment site) regulating the establishment of C. microcarpa. © 2013 Cambridge University Press.