Bathymetry of Lake Constance - State-of-the-art in surveying a large lake

In 2014 the by far largest German lake has been newly surveyed. The transnational project is funded by the European Union and delivers a detailed 3D-model of the lake- floor. The German project name is »Tiefenschärfe – Hochauflösende Vermessung Bo- densee«, which in English roughly means: high-resolution survey of Lake Constance. The German term »Tiefenschärfe« (in optics and photography: depth of field) plays with the meanings of »Tiefe« (depth) and »Schärfe« (sharpness). The result of the sur- vey shall be a clear and sharp image of the deep and shallow lake- floor. At present the LiDAR and multibeam data are still processed, but first results are presented in this article.

Kulbus: Darfur: West Sudan Topographical Field Map Sheet 1

The present map sheet is one of six field maps of the Darfur Map Series Release II (1:250'000). The maps and the geodatabase were preparded by the Centre for Development and Environment (CDE) of the University of Berne with funding from the Swiss Federal Department of Foreign Affairs. The map is being released as a technical contribution to support the humanitarian, peace-keeping and reconstruction efforts in Darfur, Western Sudan.

Improving Surveying Accuracy and Efficiency in Connecticut: An Accuracy Assessment of GEOID03 and GEOID09

Comparing published NAVD 88 Helmert orthometric heights of First-Order bench marks against GPS-determined orthometric heights showed that GEOID03 and GEOID09 perform at their reported accuracy in Connecticut. GPS-determined orthometric heights were determined by subtracting geoid undulations from ellipsoid heights obtained from a network least-squares adjustment of GPS occupations in 2007 and 2008. A total of 73 markers were occupied in these stability classes: 25 class A, 11 class B, 12 class C, 2 class D bench marks, and 23 temporary marks with transferred elevations. Adjusted ellipsoid heights were compared against OPUS as a check. We found that: the GPS-determined orthometric heights of stability class A markers and the transfers are statistically lower than their published values but just barely; stability class B, C and D markers are also statistically lower in a manner consistent with subsidence or settling; GEOID09 does not exhibit a statistically significant residual trend across Connecticut; and GEOID09 out-performed GEOID03. A "correction surface" is not recommended in spite of the geoid models being statistically different than the NAVD 88 heights because the uncertainties involved dominate the discrepancies. Instead, it is recommended that the vertical control network be re-observed.

Soldiering and surveying in British East Africa 1891 - 1894

by J. R. L. Macdonald

Funcionarios y políticas sobre el territorio en la Provincia de Buenos Aires : El Departamento de Ingenieros, 1875-1913

En esta ponencia estudiamos la conformación del Departamento de Ingenieros, sus múltiples atribuciones y los cambios que se fueron sucediendo entre su creación en 1875 y su supresión en 1913, un período fundamental para la provincia porque se trata de la época de las últimas entregas de tierra pública (más de 4 millones de hectáreas) y de los infructuosos intentos por controlar las inundaciones en la zona productiva ya ocupada. Nos interesa determinar la relación entre la toma de decisiones, la gestión técnica y económica, los cambios en la política y la economía bonaerense. Estudiamos las relaciones entre las distintas especialidades de la ingeniería y la agrimensura que llevaron a la conformación del Departamento de Ingenieros con muchas más atribuciones, entre las que se encuentran las que tenía el Departamento Topográfico. La creciente especialización de los saberes, evidentemente, estaba impactando no solamente en la disciplina, sino que se expresaba en la especificidad de las agencias estatales, que se iban complejizando para poder abarcar el cúmulo de intereses del estado y de la sociedad civil en torno al territorio

Funcionarios y políticas sobre el territorio en la Provincia de Buenos Aires : El Departamento de Ingenieros, 1875-1913

En esta ponencia estudiamos la conformación del Departamento de Ingenieros, sus múltiples atribuciones y los cambios que se fueron sucediendo entre su creación en 1875 y su supresión en 1913, un período fundamental para la provincia porque se trata de la época de las últimas entregas de tierra pública (más de 4 millones de hectáreas) y de los infructuosos intentos por controlar las inundaciones en la zona productiva ya ocupada. Nos interesa determinar la relación entre la toma de decisiones, la gestión técnica y económica, los cambios en la política y la economía bonaerense. Estudiamos las relaciones entre las distintas especialidades de la ingeniería y la agrimensura que llevaron a la conformación del Departamento de Ingenieros con muchas más atribuciones, entre las que se encuentran las que tenía el Departamento Topográfico. La creciente especialización de los saberes, evidentemente, estaba impactando no solamente en la disciplina, sino que se expresaba en la especificidad de las agencias estatales, que se iban complejizando para poder abarcar el cúmulo de intereses del estado y de la sociedad civil en torno al territorio

Funcionarios y políticas sobre el territorio en la Provincia de Buenos Aires : El Departamento de Ingenieros, 1875-1913

En esta ponencia estudiamos la conformación del Departamento de Ingenieros, sus múltiples atribuciones y los cambios que se fueron sucediendo entre su creación en 1875 y su supresión en 1913, un período fundamental para la provincia porque se trata de la época de las últimas entregas de tierra pública (más de 4 millones de hectáreas) y de los infructuosos intentos por controlar las inundaciones en la zona productiva ya ocupada. Nos interesa determinar la relación entre la toma de decisiones, la gestión técnica y económica, los cambios en la política y la economía bonaerense. Estudiamos las relaciones entre las distintas especialidades de la ingeniería y la agrimensura que llevaron a la conformación del Departamento de Ingenieros con muchas más atribuciones, entre las que se encuentran las que tenía el Departamento Topográfico. La creciente especialización de los saberes, evidentemente, estaba impactando no solamente en la disciplina, sino que se expresaba en la especificidad de las agencias estatales, que se iban complejizando para poder abarcar el cúmulo de intereses del estado y de la sociedad civil en torno al territorio

Tab. 1: Distribution of important species along a topographical transect in a siliceous boulder talus near Vårsolbukta, Bellsund

The vegetation pattern of siliceous boulder snow beds (Dicranoweision crispulae all. nov. prov.) of Svalbard was investigated by using transect studies in several places on Spitsbergen. Dicranoweisia crispula is the best diagnostic species. It is found throughout the whole snow bed, is a good differential species against Racomitrium lanuginosum communities above the snow bed, and does not occur on basic rocks. Three Andreaea spp. are also among the most important members of these communities. They are all acidophilous, but with different pH preferences. Eight weakly acidophilous species lacking both on basic and on gneissic/granitic rocks, are reported from Svalbard. Half of these are characteristic species of Dicranoweision crispulae on Svalbard.

Plant β-diversity i in human-altered forest ecosystems: the importance of the structural, spatial, and topographical characteristics of stands in patterning plant species assemblages

An understanding of spatial patterns of plant species diversity and the factors that drive those patterns is critical for the development of appropriate biodiversity management in forest ecosystems. We studied the spatial organization of plants species in human- modified and managed oak forests (primarily, Quercus faginea) in the Central Pre- Pyrenees, Spain. To test whether plant community assemblages varied non-randomly across the spatial scales, we used multiplicative diversity partitioning based on a nested hierarchical design of three increasingly coarser spatial scales (transect, stand, region). To quantify the importance of the structural, spatial, and topographical characteristics of stands in patterning plant species assemblages and identify the determinants of plant diversity patterns, we used canonical ordination. We observed a high contribution of ˟-diversity to total -diversity and found ˟-diversity to be higher and ˞-diversity to be lower than expected by random distributions of individuals at different spatial scales. Results, however, partly depended on the weighting of rare and abundant species. Variables expressing the historical management intensities of the stand such as mean stand age, the abundance of the dominant tree species (Q. faginea), age structure of the stand, and stand size were the main factors that explained the compositional variation in plant communities. The results indicate that (1) the structural, spatial, and topographical characteristics of the forest stands have the greatest effect on diversity patterns, (2) forests in landscapes that have different land use histories are environmentally heterogeneous and, therefore, can experience high levels of compositional differentiation, even at local scales (e.g., within the same stand). Maintaining habitat heterogeneity at multiple spatial scales should be considered in the development of management plans for enhancing plant diversity and related functions in human-altered forests

Topographical and mechanical characterization of living eukaryotic cells on opaque substrates: development of a general procedure and its application to the study of non-adherent lymphocytes

The mechanical behavior of living murine T-lymphocytes was assessed by atomic force microscopy (AFM). A robust experimental procedure was developed to overcome some features of lymphocytes, in particular their spherical shape and non-adherent character. The procedure included the immobilization of the lymphocytes on amine-functionalized substrates, the use of hydrodynamic effects on the deflection of the AFM cantilever to monitor the approaching, and the use of the jumping mode for obtaining the images. Indentation curves were analyzed according to Hertz's model for contact mechanics. The calculated values of the elastic modulus are consistent both when considering the results obtained from a single lymphocyte and when comparing the curves recorded from cells of different specimens