A naked ape would have fewer parasites

Unusually among the mammals, humans lack an outer layer of protective fur or hair. We propose the hypothesis that humans evolved hairlessness to reduce parasite loads, especially ectoparasites that may carry disease. We suggest that hairlessness is maintained by these naturally selected benefits and by sexual selection operating on both sexes. Hairlessness is made possible in humans owing to their unique abilities to regulate their environment via fire, shelter and clothing. Clothes and shelters allow a more flexible response to the external environment than a permanent layer of fur and can be changed or cleaned if infested with parasites. Naked mole-rats, another hairless and non-aquatic mammal species, also inhabit environments in which ectoparasite transmission is expected to be high, but in which temperatures are closely regulated. Our hypothesis explains features of human hairlessness-such as the marked sex difference in body hair, and its retention in the pubic regions-that are not explained by other theories.

Global forecasting of thermal health hazards: the skill of probabilistic predictions of the Universal Thermal Climate Index (UTCI)

Although over a hundred thermal indices can be used for assessing thermal health hazards, many ignore the human heat budget, physiology and clothing. The Universal Thermal Climate Index (UTCI) addresses these shortcomings by using an advanced thermo-physiological model. This paper assesses the potential of using the UTCI for forecasting thermal health hazards. Traditionally, such hazard forecasting has had two further limitations: it has been narrowly focused on a particular region or nation and has relied on the use of single ‘deterministic’ forecasts. Here, the UTCI is computed on a global scale,which is essential for international health-hazard warnings and disaster preparedness, and it is provided as a probabilistic forecast. It is shown that probabilistic UTCI forecasts are superior in skill to deterministic forecasts and that despite global variations, the UTCI forecast is skilful for lead times up to 10 days. The paper also demonstrates the utility of probabilistic UTCI forecasts on the example of the 2010 heat wave in Russia.

Agro-Based Biocomposites for Industrial Applications

Leaf fibers are fibers that run lengthwise through the leaves of most monocotyledonous plants such as pineapple, banana, etc. Pineapple (Ananas comosus) and Banana (Musa indica) are emerging fiber having a very large potential to be used for composite materials. Over 150,000 ha of pineapple and over 100,000 ha of banana plantations are available in Brazil for the fruit production and enormous amount of agricultural waste is produced. This residual waste represents one of the single largest sources of cellulose fibers available at almost no cost. The potential consumers for this fiber are pulp and paper, chemical feedstock, textiles and composites for the automotive, furniture and civil construction industry.

Cutinases fúngicas: propriedades e aplicações industriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agro-Based Biocomposites for Industrial Applications

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Território e ambiente institutional: O arranjo produtivo local (APL) bordados de Ibitinga-SP

This study shows the importance of the institutional environment in which the local productive arrangements are entered. It shows that the specifics of each case are historical knowledge fundamental to the studies of APLs. It also shows that in areas of traditional sectors with intensive use of labor, low innovative capacity and low barriers to entry, relations that historically will be developing between firms, workers and market can be considered strong constraints of the trajectory of success or failure. The case study is a set of companies producing textiles and confecciones (products of bed, table and bath) located in the municipality of Ibitinga-SP, of great importance in the region, the high generation of employment and income. It is the study of a particular case in the context of studies on local productive arrangements (APLs), because it serves to highlight the importance of the institutional environment as a prerequisite to overcome the difficulties and consolidation of APLs.

Reestruturação produtiva e imigração laboral nas indústrias de confecção metropolitanas: uma perspectiva comparativa entre São Paulo e Nova Iorque

Pós-graduação em Ciências Sociais - FCLAR

Mão em garra: uma proposta de intervenção terapêutica ocupacional para hansenianos

A hanseníase é uma doença infecciosa crônica, granulomatosa, de curso lento, causada pelo Mycobacterium Leprae. O bacilo acomete principalmente os nervos periféricos, causando lesões na face, mãos e pés, que podem gerar incapacidades físicas severas que contribuem para a instalação de padrões deformantes e incapacidades. A lesão do tipo mão em garra é uma sequela que pode ser observada em pacientes com lesões ao nível dos membros superiores sendo muito incapacitante, dificultando a realização das atividades de vida diária destes indivíduos e consequentemente prejudicando sua qualidade de vida e satisfação pessoal. Estas lesões geram repercussões no contexto de vida do indivíduo contribuindo para a instalação de alterações nos aspectos psicoemocionais, além do estigma próprio da doença. A intervenção terapêutica ocupacional utilizando a tecnologia assistiva de baixo custo para auxílio nas atividades de vida diária de pacientes com mão em garra objetiva a minimização dos déficits funcionais apresentados durante a utilização de adaptações funcionais utilizadas na realização de suas atividades cotidianas como alimentação, higiene pessoal e vestuário. A intervenção realizou-se através da aplicação de um protocolo de avaliação em Terapia Ocupacional conhecido como Medida Canadense de Desempenho Ocupacional (COPM) que mede o grau de desempenho e Satisfação do paciente ao realizar suas atividades de vida diária. O protocolo foi aplicado inicialmente junto aos pacientes coletando dados sobre a realização das suas atividades de vida diária sem a utilização de recursos de tecnologia assistiva. A aplicação do protocolo baseou-se na definição de cinco problemas comuns a todos os participantes, revelando graus muito baixos de desempenho e satisfação obtidos durante a realização das atividades avaliadas. Posteriormente realizou-se o processo de prescrição, confecção e treinamento das adaptações desenvolvidas para cada paciente, somando-se um total de cento e vinte aparelhos (120) desenvolvidos. Aplicou-se novamente o mesmo protocolo com os mesmos pacientes abordando os mesmos problemas após a realização de um período de treinamento das adaptações funcionais desenvolvidas, comparando-se os dados coletados no primeiro e segundo COPM. Comparando-se aos dados iniciais apresentados, os dados coletados na segunda avaliação do COPM apontaram um aumento significativo do grau de desempenho e satisfação dos pacientes além de ganho funcional. Concluí-se com esta pesquisa que a proposta de intervenção terapêutica ocupacional utilizando equipamentos de tecnologia assistiva de baixo custo (adaptações) é viável, possui resultados satisfatórios e favorece um grande alcance social devido à redução de custos dos dispositivos desenvolvidos.

Design sistêmico e ecoinovação em APLs: o método F.L.O.R.A como estratégia sustentável aplicada para o polo de confecções de Pernambuco

Pós-graduação em Design - FAAC

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Aproveitamento de Água de Chuva Para Fins Não Potável

Over the years, water has become an increasingly valuable resource and scarce, this situation is attributed to factors such as population growth, poor distribution and increasing degradation of water resources as a result of indiscriminate human activities in the middle environment, making their dwindling availability and increasing its cost. I n this context , the use of rainwater for non-potable purposes begins to be stimulated in Brazil , as a measure to preserve this resource , while in countries such as Japan and Germany , this technique has already been used for a long time. The ability to capture rainwater reduces the demand for sanitation companies, also resulting in cost reduction with the water bill and the risk of flooding in the event of heavy rains. The stored water is used only for non-potable purposes, such as toilets, taps into the garden, for washing vehicles and clothing. This work was developed with the aim of presenting the importance of rational use of water, associated with viability constructive economic and consumption of the installation of rain water harvesting, and for that, considered four case studies. From this study, it was found that the implementation of this system has led to a reduction in costs of water and sewer consumption poses no hazard to the user and its installation does not require significant changes in building construction, however, in relation to the economy, should be made a detailed analysis in each case for investment to bring a suitable financial return within the lifetime of the system

Cultura empresarial e reestruturação produtiva na indústria brasileira: o caso da Lupo S/A

Founded in 1921, the company currently known as Lupo S/A is one of the most ancient textile and clothing industries in Brazil. In this article we aim to describe the general lines of the trajectory of this family company, currently producing socks, nightwear and sports articles. The focus of this paper is on the analysis of some strategies used by the company along its formation and development process, and, particularly, the way these strategies made possible the productive restructuring associated to the overcoming of the strong crisis which began in the end of the 80's and early 90's, contributing to its recent consolidation in the clothing industry. The leading hypothesis of the study is that pioneering connected to a strong organizational culture that has been formed and constructed since its foundation and that was reestablished in a more recent management were the factors which were responsible for the advances able to generate an innovation environment in products as well as in processes and management. The theoretical reflection selected to subsidize the cognitive construction of the study of the company is based on the historical approach of the development of the textile industry in Brazil and in studies about the importance of the action of the entrepreneur, in the role of the organizational culture and of innovation to choose strategies in companies. The research involved the analysis of documents and data of the company, as well as interviews with directors and employees. The results show a traditional company model, but also show the presence of a very advanced entrepreneurial dynamic. Modern world – known as a fordist industrial model – could already be noticed in the company when this production pattern was not clearly defined yet in the Brazilian industry. Nowadays, the company faces the challenge of globalization and the open competition in the international market which brings the rivalry of the greatest and best globalized companies.

Peias e espartilhos: sátira popular à moda francesa na Primeira República

In the first decades of the Republic, the streets of the main Brazilian capital cities, especially of Rio de Janeiro and Recife, recently urbanized based on the Haussmanian Paris and smiled upon by the fever of cosmopolitanism that invested Europe, women had been used as runways where they could exhibit her imitated or imported models, especially in Paris. The iconography of the time and the advertisements conveyed by magazines and illustrated periodicals, such as the Almanach de Pernambuco and the magazine Kosmos, for instance, form the testimonies of the massive presence of the French in Rio and Recife, owners of stores and maisons, interested in fulfill the demands of the republican public. In spite of the Strong adherence of the Brazilians to the sociability models to the imported from Europe, the less-favored classes, through the popular literature, showed some resistance to these changes in the habits and clothing, especially in the Northeast, where traces of the Catholic and patriarchal moral and mentality were still alive.

Moda e literatura: a poética do vestuário em Macedo e Alencar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biorremoção de corante direto de efluente industrial simulado utilizando levedura liofilizada

One of the most primal ways of human work already known is the tessellation and ginning for the production of fabric and clothing - what used to be, back in those days, statement of power and status. The arrival of the Industrial Revolution - in the middle of the XVIII century at Britain - increased the textile industry production, and what used to be manufactured and hard to obtain, starts then to be produced in mechanical ways and large-scale. Despite all the boost given to the economy of an expanding capitalist market, it should be pointed out the consequences of this major industrialization, especially the environmental ones, more and more concerning nowadays. The emissions of waste - that sometimes could be toxic - in effluents can possibly contaminate the aquatic ecosystems, causing a huge damage to its fauna and flora, affecting therefore all the biodiversity, reaching inclusively the humans. To avoid these problems, a few strategies have been taking place in the attempt to eliminate - or at least reduce - the amount of dye found in the effluents, and as the textile industry constantly leaves waste, efficient methods - that present good results in a short period of time - with a low cost are needed. The present study will test the bioremoval capacity of yeast (Saccharomyces cerevisiae) in contact with dyes in a fix concentration, diluted in water with three different pH values. The tests will be done duplicate, and after the concentration analyses - made by spectrophotometry - it will be analyzed which pH shows major efficiency in the dye removal and what is the influence of the biomass in this process