A pharmacist-led information technology intervention for medication errors (PINCER): a multicentre, cluster randomised, controlled trial and cost-effectiveness analysis

Background: Medication errors are common in primary care and are associated with considerable risk of patient harm. We tested whether a pharmacist-led, information technology-based intervention was more effective than simple feedback in reducing the number of patients at risk of measures related to hazardous prescribing and inadequate blood-test monitoring of medicines 6 months after the intervention. Methods: In this pragmatic, cluster randomised trial general practices in the UK were stratified by research site and list size, and randomly assigned by a web-based randomisation service in block sizes of two or four to one of two groups. The practices were allocated to either computer-generated simple feedback for at-risk patients (control) or a pharmacist-led information technology intervention (PINCER), composed of feedback, educational outreach, and dedicated support. The allocation was masked to general practices, patients, pharmacists, researchers, and statisticians. Primary outcomes were the proportions of patients at 6 months after the intervention who had had any of three clinically important errors: non-selective non-steroidal anti-inflammatory drugs (NSAIDs) prescribed to those with a history of peptic ulcer without co-prescription of a proton-pump inhibitor; β blockers prescribed to those with a history of asthma; long-term prescription of angiotensin converting enzyme (ACE) inhibitor or loop diuretics to those 75 years or older without assessment of urea and electrolytes in the preceding 15 months. The cost per error avoided was estimated by incremental cost-eff ectiveness analysis. This study is registered with Controlled-Trials.com, number ISRCTN21785299. Findings: 72 general practices with a combined list size of 480 942 patients were randomised. At 6 months’ follow-up, patients in the PINCER group were significantly less likely to have been prescribed a non-selective NSAID if they had a history of peptic ulcer without gastroprotection (OR 0∙58, 95% CI 0∙38–0∙89); a β blocker if they had asthma (0∙73, 0∙58–0∙91); or an ACE inhibitor or loop diuretic without appropriate monitoring (0∙51, 0∙34–0∙78). PINCER has a 95% probability of being cost eff ective if the decision-maker’s ceiling willingness to pay reaches £75 per error avoided at 6 months. Interpretation: The PINCER intervention is an effective method for reducing a range of medication errors in general practices with computerised clinical records. Funding: Patient Safety Research Portfolio, Department of Health, England.

Mid-term evaluation of African Technology Policy Studies Network Phase VI Strategic Plan: for the period January 1, 2009 to December 31, 2010

The African Technology Policy Studies Network (ATPS) is a multidisciplinary network of researchers, private sector actors, policymakers and civil society. ATPS has the vision to become the leading international centre of excellence and reference in science, technology and innovation (STI) systems research, training and capacity building, communication and sensitization, knowledge brokerage, policy advocacy and outreach in Africa. It has a Regional Secretariat in Nairobi Kenya, and operates through national chapters in 29 countries (including 27 in Africa and two Chapters in the United Kingdom and USA for Africans in the Diaspora) with an expansion plan to cover the entire continent by 2015. The ATPS Phase VI Strategic Plan aims to improve the understanding and functioning of STI processes and systems to strengthen the learning capacity, social responses, and governance of STI for addressing Africa's development challenges, with a specific focus on the Millennium Development Goals (MDGs). A team of external evaluators carried out a midterm review to assess the effectiveness and efficiency of the implementation of the Strategic Plan for the period January 1, 2009 to December 31, 2010. The evaluation methodology involved multiple quantitative and qualitative methods to assess the qualitative and quantitative inputs (human resources, financial resources, time, etc.) into ATPS activities (both thematic and facilitative) and their tangible and intangible outputs, outcomes and impacts. Methods included a questionnaire survey of ATPS members and stakeholders, key informant interviews, and focus group discussions (FGDs) with members in six countries. Effectiveness of Programmes Under all six strategic goals, very good progress has been made towards planned outputs and outcomes. This is evidenced by key performance indicators (KPIs) generated from desk review, ratings from the survey respondents, and the themes that run through the FGDs. Institutional and Programme Cost Effectiveness Institutional Effectiveness: assessment of institutional effectiveness suggests that adequate management frameworks are in place and are being used effectively and transparently. Also technical and financial accounting mechanisms are being followed in accordance with grant agreements and with global good practice. This is evidenced by KPIs generated from desk review. Programme Cost Effectiveness: assessment of cost-effectiveness of execution of programmes shows that organisational structure is efficient, delivering high quality, relevant research at relatively low cost by international standards. The evidence includes KPIs from desk review: administrative costs to programme cost ratio has fallen steadily, to around 10%; average size of research grants is modest, without compromising quality. There is high level of pro bono input by ATPS members. ATPS Programmes Strategic Evaluation ATPS research and STI related activities are indeed unique and well aligned with STI issues and needs facing Africa and globally. The multi-disciplinary and trans-boundary nature of the research activities are creating a unique group of research scientists. The ATPS approach to research and STI issues is paving the way for the so called Third Generation University (3GU). Understanding this unique positioning, an increasing number of international multilateral agencies are seeking partnership with ATPS. ATPS is seeing an increasing level of funding commitments by Donor Partners. Recommendations for ATPS Continued Growth and Effectiveness On-going reform of ATPS administrative structure to continue The on-going reforms that have taken place within the Board, Regional Secretariat, and at the National Chapter coordination levels are welcomed. Such reform should continue until fully functional corporate governance policy and practices are fully established and implemented across the ATPS governance structures. This will further strengthen ATPS to achieve the vision of being the leading STI policy brokerage organization in Africa. Although training in corporate governance has been carried out for all sectors of ATPS leadership structure in recent time, there is some evidence that these systems have not yet been fully implemented effectively within all the governance structures of the organization, especially at the Board and National chapter levels. Future training should emphasize practical application with exercises relevant to ATPS leadership structure from the Board to the National Chapter levels. Training on Transformational Leadership - Leading a Change Though a subject of intense debate amongst economists and social scientists, it is generally agreed that cultural mindsets and attitudes could enhance and/or hinder organizational progress. ATPS’s vision demands transformational leadership skills amongst its leaders from the Board members to the National Chapter Coordinators. To lead such a change, ATPS leaders must understand and avoid personal and cultural mindsets and value systems that hinder change, while embracing those that enhance it. It requires deliberate assessment of cultural, behavioural patterns that could hinder progress and the willingness to be recast into cultural and personal habits that make for progress. Improvement of relationship amongst the Board, Secretariat, and National Chapters A large number of ATPS members and stakeholders feel they do not have effective communications and/or access to Board, National Chapter Coordinators and Regional Secretariat activities. Effort should be made to improve the implementation of ATPS communication strategy to improve on information flows amongst the ATPS management and the members. The results of the survey and the FGDs suggest that progress has been made during the past two years in this direction, but more could be done to ensure effective flow of pertinent information to members following ATPS communications channels. Strategies for Increased Funding for National Chapters There is a big gap between the fundraising skills of the Regional Secretariat and those of the National Coordinators. In some cases, funds successfully raised by the Secretariat and disbursed to national chapters were not followed up with timely progress and financial reports by some national chapters. Adequate training in relevant skills required for effective interactions with STI key policy players should be conducted regularly for National Chapter coordinators and ATPS members. The ongoing training in grant writing should continue and be made continent-wide if funding permits. Funding of National Chapters should be strategic such that capacity in a specific area of research is built which, with time, will not only lead to a strong research capacity in that area, but also strengthen academic programmes. For example, a strong climate change programme is emerging at University of Nigeria Nsukka (UNN), with strong collaborations with Universities from neighbouring States. Strategies to Increase National Government buy-in and support for STI Translating STI research outcomes into policies requires a great deal of emotional intelligence, skills which are often lacking in the first and second generation universities. In the epoch of the science-based or 2GUs, governments were content with universities carrying out scientific research and providing scientific education. Now they desire to see universities as incubators of new science- or technology-based commercial activities, whether by existing firms or start-ups. Hence, governments demand that universities take an active and leading role in the exploitation of their knowledge and they are willing to make funds available to support such activities. Thus, for universities to gain the attention of national leadership they must become centres of excellence and explicit instruments of economic development in the knowledge-based economy. The universities must do this while working collaboratively with government departments, parastatals, and institutions and dedicated research establishments. ATPS should anticipate these shifting changes and devise programmes to assist both government and universities to relate effectively. New administrative structures in member organizations to sustain and manage the emerging STI multidisciplinary teams Second Generation universities (2GUs) tend to focus on pure science and often do not regard the application of their know-how as their task. In contrast, Third Generation Universities (3GUs) objectively stimulate techno-starters – students or academics – to pursue the exploitation or commercialisation of the knowledge they generate. They view this as being equal in importance to the objectives of scientific research and education. Administratively, research in the 2GU era was mainly monodisciplinary and departments were structured along disciplines. The emerging interdisciplinary scientific teams with focus on specific research areas functionally work against the current mono-disciplinary faculty-based, administrative structure of 2GUs. For interdisciplinary teams, the current faculty system is an obstacle. There is a need for new organisational forms for university management that can create responsibilities for the task of know-how exploitation. ATPS must anticipate this and begin to strategize solutions for their member institutions to transition to 3Gus administrative structure, otherwise ATPS growth will plateau, and progress achieved so far may be stunted.

Training pharmacists to deliver a complex information technology intervention (PINCER) using the principles of educational outreach and root cause analysis

Objective: To describe the training undertaken by pharmacists employed in a pharmacist-led information technology-based intervention study to reduce medication errors in primary care (PINCER Trial), evaluate pharmacists’ assessment of the training, and the time implications of undertaking the training. Methods: Six pharmacists received training, which included training on root cause analysis and educational outreach, to enable them to deliver the PINCER Trial intervention. This was evaluated using self-report questionnaires at the end of each training session. The time taken to complete each session was recorded. Data from the evaluation forms were entered onto a Microsoft Excel spreadsheet, independently checked and the summary of results further verified. Frequencies were calculated for responses to the three-point Likert scale questions. Free-text comments from the evaluation forms and pharmacists’ diaries were analysed thematically. Key findings: All six pharmacists received 22 hours of training over five sessions. In four out of the five sessions, the pharmacists who completed an evaluation form (27 out of 30 were completed) stated they were satisfied or very satisfied with the various elements of the training package. Analysis of free-text comments and the pharmacists’ diaries showed that the principles of root cause analysis and educational outreach were viewed as useful tools to help pharmacists conduct pharmaceutical interventions in both the study and other pharmacy roles that they undertook. The opportunity to undertake role play was a valuable part of the training received. Conclusions: Findings presented in this paper suggest that providing the PINCER pharmacists with training in root cause analysis and educational outreach contributed to the successful delivery of PINCER interventions and could potentially be utilised by other pharmacists based in general practice to deliver pharmaceutical interventions to improve patient safety.

Consumer complaint channel choice in self-service technology encounters

Consumers’ choice of channel to communicate complaints, following the decision to voice to the organisation, has received very little research attention. This study contributes to filling this gap by exploring the drivers of consumers’ choice of complaint channel in the self-service technology (SST) context. Surprisingly, in this context, consumers have often chosen interpersonal complaint channels over electronic channels, resulting in some of the value of using SSTs being lost for consumers and organisations alike. Preliminary findings indicate that the perceived ease of use, the likelihood of organisational response, the desire for social interaction and the source of the SST-related complaint, might provide some clues as to the organisational strategies that can be used to encourage greater utilisation of technology-based complaint channels.

A clustering based hybrid system for mass spectrometry data analysis

Recently, much attention has been given to the mass spectrometry (MS) technology based disease classification, diagnosis, and protein-based biomarker identification. Similar to microarray based investigation, proteomic data generated by such kind of high-throughput experiments are often with high feature-to-sample ratio. Moreover, biological information and pattern are compounded with data noise, redundancy and outliers. Thus, the development of algorithms and procedures for the analysis and interpretation of such kind of data is of paramount importance. In this paper, we propose a hybrid system for analyzing such high dimensional data. The proposed method uses the k-mean clustering algorithm based feature extraction and selection procedure to bridge the filter selection and wrapper selection methods. The potential informative mass/charge (m/z) markers selected by filters are subject to the k-mean clustering algorithm for correlation and redundancy reduction, and a multi-objective Genetic Algorithm selector is then employed to identify discriminative m/z markers generated by k-mean clustering algorithm. Experimental results obtained by using the proposed method indicate that it is suitable for m/z biomarker selection and MS based sample classification.

Technology adoption : voices of teaching academics, educational designers and students

This folio presents three studies (a dissertation and two electives) which use qualitative case study methodologies to investigate technology adoption from three perspectives. Central to all three studies is the study context of Monash University. The Dissertation explores adoption of web-based learning and teaching approaches from the perspective of teaching academics as they incorporate these to facilitate their students’ learning. The study investigates teaching academics’ reasons for adopting these new technologies, the factors that influenced their adoption decisions, and the challenges they were confronted with, including the contributing factors that impacted on their adoption decisions. The study shows that while contextual factors such as power and politics of the school, department, faculty and the institution impact on adoption, supportive organisational infrastructures and policy frameworks are necessary to encourage adoption, including wider adoption. In turn, on going staff development, adoption of new work practices and being adaptive to changing work environments are key demands made on teaching academics as a result of adopting web-based teaching approaches. Elective 1, a smaller study, leads on from the dissertation and examines the impact of technology adoption on the evolving role of educational designers. The study identifies the educational designers’ role change in assisting teaching academics to move from more conventional forms of teaching to more technology based learner-centred collaborative models. An important aspect of the study is the managers’ perspectives of this role in a university that has adopted a strong flexible learning and technology policy. The findings show that educational designers now work as project managers in larger teams consisting of a wider range of professionals, their expanded role in introducing technology into learning designs, providing staff development in the area, and giving technical help including advice on copyright and intellectual property issues. Elective 2 explores student readiness to adopt these technologies for learning. The study is designed to achieve an understanding of three broad categories of learners from a first year design unit: (1) South East Asian and East Asian students, (2) all other international students, and (3) local Australian students are studied to examine their readiness for modes of learning that are flexible; their approaches to study in a creative discipline area; and their openness to using technology. Findings of the study are discussed under the key themes – dependence on the teacher and classroom environment, flexible learning and working alone, structure, communication and work patterns. The study concludes by discussing the possible cultural attributes that have an impact on the learning. The three studies found that the institution, its people, structures and processes must all adapt, evolve and grow in order to provide effective, engaging, student-centred web-based learning environments. Students in turn must be enabled to manage their study, make use of the technologies and maximise their learning experience. The findings revealed the stage of technology use reached at Monash University at the time of the study through the voices of the teaching academics, educational designers and students.

Telecommunication technology and the professional development of teachers : challenge and opportunity

The thesis explores an effective model for using the internet in a distance training program for secondary school teachers. The professional development program, the dissertation, titled The Virtual University: Professional development for teachers, was initiated based on aspects of telecommunication technology and the professional development for Thai school teachers. The question of this program was “How could information technology be used in developing an appropriate professional development model for Thai teachers?” Prior to the project, the four research studies were conducted to formulate the related base line information and supported framework for the program development. The four researches are: (1) Telecommunication Technology in Thai Schools, (2) The Role of University on Science Teachers Development, (3) Computer Education Curriculum for Student Teachers: Theory and Practice, and (4) Teachers’ Perceptions of the Academic Link Project Between Schools and Universities for Teacher Professional Development. The first research study provides the information about the necessary basic factors for change in Thai secondary schools and the new insights and understandings about change in Thai schooling. The major findings were the understandings about teachers’ need for professional development, the available support in Thai school for professional development, and the limitations of professional development of teachers. The second research study provides the information about the roles of university faculty on initiation and operation of science teacher development programs, science teaching and learning resources centers, science instructional media design and production services, science teaching clinics, and science teachers’ associations. The third research study provides the conceptual framework for both preservice and inservice curriculum development program for teacher development. The last research study provides a base of descriptive information about the perspectives of school teachers towards the academic link project between schools and universities and the partnership which can assist in its establishment. The findings of these four research tasks were used for the formation of the framework of the dissertation. The EDNET Project, an example of teachers’ professional development through the information technology based training, was developed and implemented with ten school teachers in Khon Kaen.

Virtual worlds to enhance student engagement

Both the School of Education and the discipline of Criminology at Deakin University have been using the 3-dimensional environment Second Life to deliver curriculum content and to engage students with each other and with teaching staff. The nature of this platform is facilitating more proactive student engagement with technology, including increased student competence in sharing artwork, problem solving and general discussion of complex criminological issues. In this paper, we provide some examples of how we are using Second Life in our curriculum offerings in Education and Criminology as a tool to promote greater engagement, particularly for students undertaking their courses by distance. We outine how the immersive nature of this platform can enhance the level of student interaction to produce a deeper form of engagement with our Unit material than is possible through conventional text and web-based document repositories.

The challenges of cloud computing technology adoption in e-government

 The endless transformation of technological innovation requires greater collaboration of Information Communication and Technology (ICT) in various areas especially in public sectors. Many attempts have been made in improving the quality of E-Government services; one of it is adopting the cloud computing technology. Successful implementation of cloud computing technology can benefit the public sector in many ways one of it is cost reduction. Most government organizations especially in the developing countries are committed in adopting the cloud technology based on the increased demands in cloud adoption in E Government services. Unfortunately, despite all the benefits, the cloud computing technology raises some major risks. The success of implementation of cloud computing technology is determined by how well the government tackles the challenges. Therefore, this paper specifically surveyed the associated challenges of adopting Cloud Technology for E-Government by choosing Malaysia as the case study.

A qualitative study of the internationalization of born-global technology start-ups in Brazil

O fenômeno das empresas born globals e a internacionalização de empresas brasileiras de base tecnológica são tópicos recentes na literatura acadêmica, devido também ao fenômeno ser recente. Não existem muitos estudados feitos com foco no mercado brasileiro, e os poucos que foram feitos, possuem um viés quantitativo. Esse estudo, entretanto, tem como objetivo analisar startups de maneira qualitativa. Uma extensa revisão de literatura foi desenvolvida a fim de melhor analisar as fundações nas quais o estudo seria desenvolvido, revisando os métodos de internacionalização, empreendedorismo no Brasil, e o fenômeno born global no geral. Entrevistas foram conduzidas com empreendedores no Brasil, que passaram pelo processo de internacionalização de seus modelos de negócios, a fim de reunir introspecções a respeito das peculiaridades do mercado brasileiro. Foram também analisados os fatores de escalabilidade de modelos de negócios dependentes de tecnologia, motivadores para a internacionalização, critério de seleção de mercados, programas governamentais, e o papel das startups brasileiras em uma perspectiva global.

Optical Microring Resonators based on ion-implanted LiNbO3 ridge waveguides

The growing interest for Integrated Optics for sensing, telecommunications and even electronics is driving research to find solutions to the new challenges issued by a more and more fast, connected and smart world. This thesis deals with the design, the fabrication and the characterisation of the first prototypes of Microring Resonators realised using ion implanted Lithium Niobate (LiNbO3) ridge waveguides. Optical Resonator is one among the most important devices for all tasks described above. LiNbO3 is the substrate commonly used to fabricate optical modulators thanks to its electro-optic characteristics. Since it is produced in high quantity, good quality and large wafers its price is low compared to other electro-optic substrate. We propose to use ion implantation as fabrication technology because in the other way standard optical waveguides realised in LiNbO3 by Proton Exchange (PE) or metal diffusion do not allow small bending radii, which are necessary to keep the circuit footprint small. We will show in fact that this approach allows to fabricate waveguides on Lithium Niobate that are better than PE or metal diffused waveguides as it allows smaller size devices and tailoring of the refractive index profile controlling the implantation parameters. Moreover, we will show that the ridge technology based on enhanced etching rate via ion implantation produces a waveguide with roughness lower than a dry etched one. Finally it has been assessed a complete technological process for fabrication of Microring Resonator devices in Lithium Niobate by ion implantation and the first prototypes have been produced.

Streaming Support for Data Intensive Cloud-Based Sequence Analysis

Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS) technology. Based on the concepts of “resources-on-demand” and “pay-as-you-go”, scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client’s site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation.

WiMAX,Technology and Market.

Wireless communication is the transfer of information from one place to another without using wires. From the earliest times, humans have felt the need to develop techniques of remote communication. From this need arose the smoke signals, communication by sun reflection in mirrors and so on. But today the telecommunications electronic devices such as telephone, television, radio or computer. Radio and television are used for one-way communication. Telephone and computer are used for two-way communication. In wireless networks there is almost unlimited mobility, we can access the network almost anywhere or anytime. In wired networks we have the restriction of using the services in fixed area services. The demand of the wireless is increasing very fast; everybody wants broadband services anywhere anytime. WiMAX (Worldwide Interoperability for Microwave Access) is a broadband wireless technology based on IEEE 802.16-2004 and IEEE 802.16e-2005 that appears to solve this demand. WIMAX is a system that allows wireless data transmission in areas of up to 48 km of radius. It is designed as a wireless alternative to ADSL and a way to connect nodes in wireless metropolitan areas network. Unlike wireless systems that are limited in most cases, about 100 meter, providing greater coverage and more bandwidth. WIMAX promises to achieve high data transmission rates over large areas with a great amount of users. This alternative to the networks of broadband access common as DSL o Wi-Fi, can give broadband access to places quickly to rural areas and developing areas around the world. This paper is a study of WIMAX technology and market situation. First, the paper is responsible for explaining the technical aspects of WIMAX. For this gives an overview of WIMAX standards, physical layer, MAC layer and WiMAX, Technology and Market Beijing University of Post and Telecommunications 2 WIMAX network architecture. Second, the paper address the issue of market in which provides an overview of development and deployment of WIMAX to end the future development trend of WIMAX is addressed. RESUMEN: Por comunicaciones inalámbricas se entiende la transferencia de información desde un lugar a otro sin la necesidad de un soporte físico como es por ejemplo el cable. Por lo que remontándose a los principios de la existencia del ser humano, nos damos cuenta de que el ser humano siempre ha sentido la necesidad de desarrollar técnicas para lograr comunicarse a distancia con sus semejantes. De dicha necesidad, surgieron técnicas tan ancestrales como puede ser la comunicación mediante señales de humo o por reflexión de los rayos solares en espejos entre otras. La curiosidad del ser humano y la necesidad de comunicarse a distancia fue la que llevó a Alexander Graham Bell a inventar el teléfono en 1876. La aparición de un dispositivo que permitía comunicarse a distancia permitiendo escuchar la voz de aquella persona con la que se quería hablar, supuso una revolución no solo en el panorama tecnológico, si no también en el panorama social. Pues a parte de permitir comunicaciones a larga distancia, solventó el problema de la comunicación en “tiempo real”. A raíz de este invento, la tecnología en materia de comunicación ha ido avanzando significativamente, más concretamente en lo referido a las comunicaciones inalámbricas. En 1973 se realizó la primera llamada desde un terminal móvil aunque no fue hasta 1983 cuando se empezó a comercializar dicho terminal, lo que supuso un cambio de hábitos y costumbres para la sociedad. Desde la aparición del primer móvil el crecimiento del mercado ha sido exponencial, lo que ha repercutido en una demanda impensable de nuevas aplicaciones integradas en dichos dispositivos móviles que satisfagan las necesidades que día a día autogenera la sociedad. Tras conseguir realizar llamadas a larga distancia de forma inalámbrica, el siguiente paso fue la creación de los SMS (Short Message System) lo que supuso una nueva revolución además de abaratar costes al usuario a la hora de comunicarse. Pero el gran reto para la industria de las comunicaciones móviles surgió con la aparición de internet. Todo el mundo sentía la necesidad de poder conectarse a esa gran base de datos que es internet en cualquier parte y en cualquier momento. Las primeras conexiones a internet desde dispositivos móviles se realizaron a través de la tecnología WAP (Wireless Application Protocol) hasta la aparición de la tecnología GPRS que permitía la conexión mediante protocolo TCP/IP. A partir de estas conexiones han surgido otras tecnologías, como EDGE, HSDPA, etc., que permitían y permiten la conexión a internet desde dispositivos móviles. Hoy en día la demanda de servicios de red inalámbrica crece de forma rápida y exponencial, todo el mundo quiere servicios de banda ancha en cualquier lugar y en cualquier momento. En este documento se analiza la tecnología WiMAX ( Worldwide Interoperability for Microwave Access) que es una tecnología de banda ancha basada en el estándar IEEE 802.16 creada para brindar servicios a la demanda emergente en la banda ancha desde un punto de vista tecnológico, donde se da una visión de la parte técnica de la tecnología; y desde el punto de vista del mercado, donde se analiza el despliegue y desarrollo de la tecnología desde el punto de vista de negocio. WiMAX es una tecnología que permite la transmisión inalámbrica de datos en áreas de hasta 48Km de radio y que está diseñada como alternativa inalámbrica para ADSL y para conectar nodos de red inalámbrica en áreas metropolitanas. A diferencia de los sistemas inalámbricos existentes que están limitados en su mayoría a unos cientos de metros, WiMAX ofrece una mayor cobertura y un mayor ancho de banda que permita dar soporte a nuevas aplicaciones, además de alcanzar altas tasas de transmisión de datos en grandes áreas con una gran cantidad de usuarios. Se trata de una alternativa a las redes de acceso de banda ancha como DSL o Wi-Fi, que puede dar acceso de banda ancha a lugares tales como zonas rurales o zonas en vías de desarrollo por todo el mundo con rapidez. Existen dos tecnologías de WiMAX, WiMAX fijo (basado en el estándar IEEE 802.16d-2004) y WiMAX móvil (basado en el estándar IEEE 802.16e-2005). La tecnología fija está diseñada para comunicaciones punto a multipunto, mientras que la fija lo está para comunicaciones multipunto a multipunto. WiMAX móvil se basa en la tecnología OFDM que ofrece ventajas en términos de latencia, eficiencia en el uso del espectro y soporte avanzado para antenas. La modulación OFDM es muy robusta frente al multitrayecto, que es muy habitual en los canales de radiodifusión, frente al desvanecimiento debido a las condiciones meteorológicas y frente a las interferencias de RF. Una vez creada la tecnología WiMAX, poseedora de las características idóneas para solventar la demanda del mercado, ha de darse el siguiente paso, hay que convencer a la industria de las telecomunicaciones de que dicha tecnología realmente es la solución para que apoyen su implantación en el mercado de la banda ancha para las redes inalámbricas. Es aquí donde entra en juego el estudio del mercado que se realiza en este documento. WiMAX se enfrenta a un mercado exigente en el que a parte de tener que dar soporte a la demanda técnica, ha de ofrecer una rentabilidad económica a la industria de las comunicaciones móviles y más concretamente a las operadoras móviles que son quienes dentro del sector de las telecomunicaciones finalmente han de confiar en la tecnología para dar soporte a sus usuarios ya que estos al fin y al cabo lo único que quieren es que su dispositivo móvil satisfaga sus necesidades independientemente de la tecnología que utilicen para tener acceso a la red inalámbrica de banda ancha. Quizás el mayor problema al que se ha enfrentado WiMAX haya sido la situación económica en la que se encuentra el mundo. WiMAX a comenzado su andadura en uno de los peores momentos, pero aun así se presenta como una tecnología capaz de ayudar al mundo a salir hacia delante en estos tiempos tan duros. Finalmente se analiza uno de los debates existentes hoy en día en el sector de las comunicaciones móviles, WiMAX vs. LTE. Como se puede observar en el documento realmente una tecnología no saldrá victoriosa frente a la otra, si no que ambas tecnologías podrán coexistir y trabajar de forma conjunta.

Towards cost reduction in concentrating solar power: innovative design for an efficient fresnel based solar field

Energía termosolar (de concentración) es uno de los nombres que hacen referencia en español al término inglés “concentrating solar power”. Se trata de una tecnología basada en la captura de la potencia térmica de la radiación solar, de forma que permita alcanzar temperaturas capaces de alimentar un ciclo termodinámico convencional (o avanzado); el futuro de esta tecnología depende principalmente de su capacidad para concentrar la radiación solar de manera eficiente y económica. La presente tesis está orientada hacia la resolución de ciertos problemas importantes relacionados con este objetivo. La mencionada necesidad de reducir costes en la concentración de radiación solar directa, asegurando el objetivo termodinámico de calentar un fluido hasta una determinada temperatura, es de vital importancia. Los colectores lineales Fresnel han sido identificados en la literatura científica como una tecnología con gran potencial para alcanzar esta reducción de costes. Dicha tecnología ha sido seleccionada por numerosas razones, entre las que destacan su gran libertad de diseño y su actual estado inmaduro. Con el objetivo de responder a este desafío se desarrollado un detallado estudio de las propiedades ópticas de los colectores lineales Fresnel, para lo cual se han utilizado métodos analíticos y numéricos de manera combinada. En primer lugar, se han usado unos modelos para la predicción de la localización y la irradiación normal directa del sol junto a unas relaciones analíticas desarrolladas para estudiar el efecto de múltiples variables de diseño en la energía incidente sobre los espejos. Del mismo modo, se han obtenido analíticamente los errores debidos al llamado “off-axis aberration”, a la apertura de los rayos reflejados en los espejos y a las sombras y bloqueos entre espejos. Esto ha permitido la comparación de diferentes formas de espejo –planos, circulares o parabólicos–, así como el diseño preliminar de la localización y anchura de los espejos y receptor sin necesidad de costosos métodos numéricos. En segundo lugar, se ha desarrollado un modelo de trazado de rayos de Monte Carlo con el objetivo de comprobar la validez del estudio analítico, pero sobre todo porque este no es preciso en el estudio de la reflexión en espejos. El código desarrollado está específicamente ideado para colectores lineales Fresnel, lo que ha permitido la reducción del tiempo de cálculo en varios órdenes de magnitud en comparación con un programa comercial más general. Esto justifica el desarrollo de un nuevo código en lugar de la compra de una licencia de otro programa. El modelo ha sido usado primeramente para comparar la intensidad de flujo térmico y rendimiento de colectores Fresnel, con y sin reflector secundario, con los colectores cilíndrico parabólicos. Finalmente, la conjunción de los resultados obtenidos en el estudio analítico con el programa numérico ha sido usada para optimizar el campo solar para diferentes orientaciones –Norte-Sur y Este-Oeste–, diferentes localizaciones –Almería y Aswan–, diferentes inclinaciones hacia el Trópico –desde 0 deg hasta 32 deg– y diferentes mínimos de intensidad del flujo en el centro del receptor –10 kW/m2 y 25 kW/m2–. La presente tesis ha conducido a importantes descubrimientos que deben ser considerados a la hora de diseñar un campo solar Fresnel. En primer lugar, los espejos utilizados no deben ser plano, sino cilíndricos o parabólicos, ya que los espejos curvos implican mayores concentraciones y rendimiento. Por otro lado, se ha llegado a la conclusión de que la orientación Este-Oeste es más propicia para localizaciones con altas latitudes, como Almería, mientras que en zonas más cercanas a los trópicos como Aswan los campos Norte-Sur conducen a mayores rendimientos. Es de destacar que la orientación Este-Oeste requiere aproximadamente la mitad de espejos que los campos Norte-Sur, puediendo estar inclinados hacia los Trópicos para mejorar el rendimiento, y que alcanzan parecidos valores de intensidad térmica en el receptor todos los días a mediodía. Sin embargo, los campos con orientación Norte-Sur permiten un flujo más constante a lo largo de un día. Por último, ha sido demostrado que el uso de diseños pre-optimizados analíticamente, con anchura de espejos y espaciado entre espejos variables a lo ancho del campo, pueden implicar aumentos de la energía generada por metro cuadrado de espejos de hasta el 6%. El rendimiento óptico anual de los colectores cilíndrico parabólicos es 23 % mayor que el rendimiento de los campos Fresnel en Almería, mientras que la diferencia es de solo 9 % en Aswan. Ello implica que, para alcanzar el mismo precio de electricidad que la tecnología de referencia, la reducción de costes de instalación por metro cuadrado de espejo debe estar entre el 10 % y el 25 %, y que los colectores lineales Fresnel tienen más posibilidades de ser desarrollados en zonas de bajas latitudes. Como consecuencia de los estudios desarrollados en esta tesis se ha patentado un sistema de almacenamiento que tiene en cuenta la variación del flujo térmico en el receptor a lo largo del día, especialmente para campos con orientación Este-Oeste. Este invento permitiría el aprovechamiento de la energía incidente durante más parte del año, aumentando de manera apreciable los rendimientos óptico y térmico. Abstract Concentrating solar power is the common name of a technology based on capturing the thermal power of solar radiation, in a suitable way to reach temperatures able to activate a conventional (or advanced) thermodynamic cycle to generate electricity; this quest mainly depends on our ability to concentrate solar radiation in a cheap and efficient way. The present thesis is focused to highlight and help solving some of the important issues related to this problem. The need of reducing costs in concentrating the direct solar radiation, but without jeopardizing the thermodynamic objective of heating a fluid up to the required temperature, is of prime importance. Linear Fresnel collectors have been identified in the scientific literature as a technology with high potential to reach this cost reduction. This technology has been selected because of a number of reasons, particularly the degrees of freedom of this type of concentrating configuration and its current immature state. In order to respond to this challenge, a very detailed exercise has been carried out on the optical properties of linear Fresnel collectors. This has been done combining analytic and numerical methods. First, the effect of the design variables on the ratio of energy impinging onto the reflecting surface has been studied using analytically developed equations, together with models that predict the location and direct normal irradiance of the sun at any moment. Similarly, errors due to off-axis aberration, to the aperture of the reflected energy beam and to shading and blocking effects have been obtained analytically. This has allowed the comparison of different shapes of mirrors –flat, cylindrical or parabolic–, as well as a preliminary optimization of the location and width of mirrors and receiver with no need of time-consuming numerical models. Second, in order to prove the validity of the analytic results, but also due to the fact that the study of the reflection process is not precise enough when using analytic equations, a Monte Carlo Ray Trace model has been developed. The developed code is designed specifically for linear Fresnel collectors, which has reduced the computing time by several orders of magnitude compared to a wider commercial software. This justifies the development of the new code. The model has been first used to compare radiation flux intensities and efficiencies of linear Fresnel collectors, both multitube receiver and secondary reflector receiver technologies, with parabolic trough collectors. Finally, the results obtained in the analytic study together with the numeric model have used in order to optimize the solar field for different orientations –North-South and East-West–, different locations –Almería and Aswan–, different tilts of the field towards the Tropic –from 0 deg to 32 deg– and different flux intensity minimum requirements –10 kW/m2 and 25 kW/m2. This thesis work has led to several important findings that should be considered in the design of Fresnel solar fields. First, flat mirrors should not be used in any case, as cylindrical and parabolic mirrors lead to higher flux intensities and efficiencies. Second, it has been concluded that, in locations relatively far from the Tropics such as Almería, East-West embodiments are more efficient, while in Aswan North- South orientation leads to a higher annual efficiency. It must be noted that East-West oriented solar fields require approximately half the number of mirrors than NS oriented fields, can be tilted towards the Equator in order to increase the efficiency and attain similar values of flux intensity at the receiver every day at midday. On the other hand, in NS embodiments the flux intensity is more even during each single day. Finally, it has been proved that the use of analytic designs with variable shift between mirrors and variable width of mirrors across the field can lead to improvements in the electricity generated per reflecting surface square meter up to 6%. The annual optical efficiency of parabolic troughs has been found to be 23% higher than the efficiency of Fresnel fields in Almería, but it is only around 9% higher in Aswan. This implies that, in order to attain the same levelized cost of electricity than parabolic troughs, the required reduction of installation costs per mirror square meter is in the range of 10-25%. Also, it is concluded that linear Fresnel collectors are more suitable for low latitude areas. As a consequence of the studies carried out in this thesis, an innovative storage system has been patented. This system takes into account the variation of the flux intensity along the day, especially for East-West oriented solar fields. As a result, the invention would allow to exploit the impinging radiation along longer time every day, increasing appreciably the optical and thermal efficiencies.

Foundations of quantum technology

Recent progress in fabrication and control of single quantum systems presage a nascent technology based on quantum principles. We review these principles in the context of specific examples including: quantum dots, quantum electromechanical systems, quantum communication and quantum computation.