Trimethoprim-selective electrodes with molecularly imprinted polymers acting as ionophores and potentiometric transduction on graphite solid-contact

This work proposes a new biomimetic sensor material for trimethoprim. It is prepared by means of radical polymerization, having trimethylolpropane trimethacrylate as cross-linker, benzoyl peroxide as radicalar iniciator, chloroform as porogenic solvent, and methacrylic acid and 2-vinyl pyridine as monomers. Different percentages of sensor in a range between 1 and 6% were studied. Their behavior was compared to that obtained with ion-exchanger quaternary ammonium salt (additive tetrakis(p-chlorophenyl)borate or tetraphenylborate). The effect of an anionic additive in the sensing membrane was also tested. Trimethoprim sensors with 1% of imprinted particles from methacrylic acid monomers showed the best response in terms of slope (59.7 mV/decade) and detection limit (4.01 × 10− 7 mol/L). These electrodes displayed also a good selectivity towards nickel, manganese aluminium, ammonium, lead, potassium, sodium, iron, chromium, sulfadiazine, alanine, cysteine, tryptophan, valine and glycine. The sensors were not affected by pH changes from 2 to 6. They were successfully applied to the analysis of water from aquaculture.

Carnitine tailored Sensors on Surface Molecular Imprinting based on Graphene layers

III Jornadas de Electroquímica e Inovação (Electroquímica e Nanomateriais), na Universidade de Trás-os-Montes e Alto Douro, Vila Real, 16 a 17 de Setembro de 2013

Host-Tailored Sensors for Carnitine Potentiometric Measurements based on Surface Molecular Imprinting

Graduate Student Symposium on Molecular Imprinting 2013, na Queen’s University, Belfast, United Kingdom, 15 a 17 de Agosto de 2013

Enzymatic hydrophobic modification of jute fibers via grafting to reinforce composites

Horseradish peroxidase (HRP)/H2O2 system catalyzes the free-radical polymerization of aromatic compounds such as lignins and gallate esters. In this work, dodecyl gallate (DG) was grafted onto the surfaces of lignin-rich jute fabrics by HRP-mediated oxidative polymerization with an aim to enhance the hydrophobicity of the fibers. The DG-grafted jute fibers and reaction products of their model compounds were characterized by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results clearly indicated the grafting of DG to the jute fiber by HRP. Furthermore, the hydrophobicity of jute fabrics was determined by measuring the wetting time and static contact angle. Compared to the control sample, the wetting time and static contact angle of the grated fabrics changed from ~1 s to 1 h and from ~0° to 123.68°, respectively. This clearly proved that the hydrophobicity of jute fabrics improved considerably. Conditions of the HRP-catalyzed DG-grafting reactions were optimized in terms of the DG content of modified jute fabrics. Moreover, the results of breaking strength and elongation of DG-grafted jute/ polypropylene (PP) composites demonstrated improved reinforcement of the composite due to enzymatic hydrophobic modification of jute fibers.

Fotoiniciação de polimerização vinílica

The initiation step of the light-induced polymerization kinetics of vinyl monomers using dye-sensitized photoinitiators to generate active radicals is discussed. The photoredox processes of basic dyes with amines and sulfinates are described as photochemical systems capable of starting free-radical polymerization of vinyl monomers in homogeneous and microheterogeneous media. Photophysical techniques like laser flash photolysis and time-correlated single photon counting are used to investigate the excited-state kinetics of the dyes.

Micelles polyioniques ternaires pour la libération intracellulaire d’oligonucleotides

Les oligonucléotides (ONs) antisens présentent un fort potentiel en tant qu’agents thérapeutiques. Toutefois, leurs propriétés physicochimiques limitent leur utilisation en thérapie génique. Pour pallier aux divers obstacles, des systèmes de vectorisation, tels que les micelles polyioniques (PICMs), ont été développés. Grâce à leur structure unique, les micelles protégent l’ON contre une dégradation prématurée et le couplage d’un ligand à leur surface augmente leur spécificité et leur internalisation. Dans d’autres systèmes, un polymère adjuvant aux propriétés pH-sensibles peut être ajouté pour faciliter la sortie de l’endosome et augmenter l’efficacité de l’ON. L’objectif général de ce mémoire était de mettre au point des PICMs ternaires ciblées pour l’administration d’ONs. Ces micelles assureraient à la fois l’internalisation cellulaire de leur cargaison en interagissant avec des récepteurs cellulaires et sa fuite de l’endosome grâce à un mécanisme de déstabilisation de la membrane endosomale. Pour cela, des PICMs composées d’un copolymère cationique de type poly(éthylène glycol)-bloc-poly(méthacrylate d’(alkylamino)éthyle) et d’un copolymère d’acide méthacrylique ont été préparées. Les propriétés physicochimiques de ces vecteurs ont démontré qu’ils permettaient une condensation efficace de l’acide nucléique et ce, indépendamment de la nature du polymère cationique et de l’acide nucléique. Finalement, une approche de couplage par pont disulfure a été développée afin de greffer au copolymère un fragment d’anticorps dirigé contre les récepteurs de la transferrine. En conclusion, ces travaux démontrent la versatilité et le potentiel des PICMs ternaires en tant que vecteurs d’acide nucléique, et proposent une méthodologie de couplage d’un ligand afin de formuler des PICMs ciblées.

Étude de l’issue diastéréomérique impliquant la réduction radicalaire d’α-bromoesters adjacents à un tétrahydropyrane substitué

Cet ouvrage traite de la formation diastéréosélective de tétrahydropyranes 3,7-cis et 3,7-trans polysubstitués. Des méthodologies de cycloétherification et de C-glycosidation en tandem avec une réduction radicalaire y sont décrites (pyranes 3,7- trans) tandis qu’une haloéthérification en tandem avec le même processus radicalaire conduit aux pyranes 3,7-cis. Suite à des travaux antérieurs du laboratoire, des études ont été réalisées afin de comprendre l’influence de la stéréochimie des substituants en position C3, C6, C7 et C8 sur l’issue diastéréochimique lors d’un transfert d’hydrure sous contrôle exocyclique sur un centre radicalaire adjacent à un tétrahydropyrane (C2). Ces études ont permis de solutionner les problèmes de diastéréosélectivité rencontrés lors des réductions radicalaires des centres en C2 de divers fragments élaborés d’ionophores (e.g. zincophorine, salinomycine, narasine…) réalisées par notre groupe. Des études conformationnelles réalisées sur des pyranes di- ou tri-substitués ont permis de comprendre les diastéréosélectivités notées lors du processus radicalaire en fonction des stéréochimies relatives des centres précédemment cités. En particulier, l’utilisation d’un bicycle rigide (trans-octahydrochromène) a permis de montrer l’importance du positionnement spatial (axial ou équatorial) de la chaîne portant le centre radicalaire. Par la suite, nous avons pu mettre en évidence une amplification des ratios en faveur du produit de réduction radicalaire 2,3-anti lorsque la réaction est réalisée en présence d’un acide de Lewis monodentate encombré (MAD). L’optimisation du contrôle endocyclique lors du transfert d’hydrure a permis de générer la stéréochimie complémentaire 2,3-syn. L’utilisation du TTMSS comme source d’hydrure combinée à l’utilisation d’un acide de Lewis bidentate tel que MgBr2·OEt2 a permis l’obtention d’excellentes sélectivités en faveur du produit endocyclique. Des études RMN 13C ainsi que le titrage des ions Mg2+ en solution ont été effectués afin de comprendre la nature des complexes impliqués. Finalement, ces études ont permis la formation stéréocontrôlée de centres stéréogéniques adjacents à un THP, motifs fréquement rencontrés dans certains policétides. Elles permettent ainsi d’envisager la synthèse de polyéthers de type ionophore et d’autres molécules d’intérêt biologique.

Surface structure of thin asymmetric PS-b-PMMA diblock copolymers investigated by atomic force microscopy

Asymmetric poly(styrene-b-methyl methacrylate) (PS-b-PMMA) diblock copolymers of molecular weight M-n = 29,700g mol(-1) (M-PS = 9300 g mol(-1) M-PMMA = 20,100 g mol(-1), PD = 1.15, chi(PS) = 0.323, chi(PMMA) = 0.677) and M-n = 63,900 g mol(-1) (M-PS = 50,500 g mol(-1), M-PMMA = 13,400 g mol(-1), PD = 1.18, chi(PS) = 0.790, chi(PMMA) = 0.210) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. Atomic force microscopy (AFM) was used to investigate the surface structure of thin films, prepared by spin-coating the diblock copolymers on a silicon substrate. We show that the nanostructure of the diblock copolymer depends on the molecular weight and volume fraction of the diblock copolymers. We observed a perpendicular lamellar structure for the high molar mass sample and a hexagonal-packed cylindrical patterning for the lower molar mass one. Small-angle X-ray scattering investigation of these samples without annealing did not reveal any ordered structure. Annealing of PS-b-PMMA samples at 160 degrees C for 24 h led to a change in surface structure.

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.

Approaches to the synthesis of novel photoactive side chain liquid crystalline polymers containing analogues of the cinnamate ester group

A series of chain liquid crystalline copolymers of 4-cyanophenyl 4′-(6-methacryloyloxyhexyloxy)benzoate and 2-methacryloyloxyethyl β-(1-naphthyl)-propenoate were prepared by free radical polymerization. The corresponding polyacrylates could not be prepared in the same way and an alternative method was used for their preparation involving the synthesis of copolymers of the mesogenic monomer and 2-hydroxyethyl acrylate followed by treatment of the resulting polymers with β-(1-naphthyl)propenoyl chloride. The materials are of interest as photoactive liquid crystalline polymers. The effect of introducing a bulky nonmesogenic group into a liquid crystalline copolymer generally lowers the clearing temperature and raises Tg but also gives rise to contrasting phase behaviour in these two series of polymers. Polymethacrylates which show mesomorphism have sharp transitions and continue to exhibit a highly ordered smectic phase over the bulk of their liquid crystal range. Polyacrylates, on the other hand, exhibit a weakening and broadening-out of their thermal transitions consistent with a lowering of order. These results emphasize the effect of the polymer backbone on phase behaviour.

Altering peptide fibrillization by polymer conjugation

A strategy is presented that exploits the ability of synthetic polymers of different nature to disturb the strong selfassembly capabilities of amyloid based β-sheet forming peptides. Following a convergent approach, the peptides of interest were synthesized via solid-phase peptide synthesis (SPPS) and the polymers via reversible addition−fragmentation chain transfer (RAFT) polymerization, followed by a copper(I) catalyzed azide− alkyne cycloaddition (CuAAC) to generate the desired peptide− polymer conjugates. This study focuses on a modified version of the core sequence of the β-amyloid peptide (Aβ), Aβ(16−20) (KLVFF). The influence of attaching short poly(Nisopropylacrylamide) and poly(hydroxyethylacrylate) to the peptide sequences on the self-assembly properties of the hybrid materials were studied via infrared spectroscopy, TEM, circular dichroism and SAXS. The findings indicate that attaching these polymers disturbs the strong self-assembly properties of the biomolecules to a certain degree and permits to influence the aggregation of the peptides based on their β-sheets forming abilities. This study presents an innovative route toward targeted and controlled assembly of amyloid-like fibers to drive the formation of polymeric nanomaterials.

Evaluation of Postpolymerization as a Function of the Storage Time of Triethylene Glycol Dimethacrylate/2,2-Bis[4-(2-Hydroxy-3-Methacryloxy-Prop-1-Oxy)-Phenyl]-propane Bisphenyl-alpha-Glycidyl Ether Dimethacrylate Copolymers Used in Dental Resins by Differential Scanning Calorimetry and Dynamic Mechanical Analysis

The aim of this work was to evaluate the effect of the storage time on the thermal properties of triethylene glycol dimethacrylate/2,2-bis[4-(2-hydroxy-3-methacryloxy-prop-1-oxy)-phenyl]propane bisphenyl-alpha-glycidyl ether dimethacrylate (TB) copolymers used in formulations of dental resins after photopolymerization. The TB copolymers were prepared by photopolymerization with an Ultrablue IS light-emitting diode, stored in the dark for 160 days at 37 degrees C, and characterized with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared spectroscopy with attenuated total reflection. DSC curves indicated the presence of an exothermic peak, confirming that the reaction was not completed during the photopolymerization process. This exothermic peak became smaller as a function of the storage time and was shifted at higher temperatures. In DMA studies, a plot of the loss tangent versus the temperature initially showed the presence of two well-defined peaks. The presence of both peaks confirmed the presence of residual monomers that were not converted during the photopolymerization process. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 679-684, 2009

Thermal analysis characterization of PAAm-co-MC hydrogels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)