A mechanism for the formation of oxygen and iron bimodal radial distribution in the disc of our Galaxy

Recently, it has been proposed that there are two type Ia supernova progenitors: short-lived and long-lived. On the basis of this idea, we develop a theory of a unified mechanism for the formation of the bimodal radial distribution of iron and oxygen in the Galactic disc. The underlying cause for the formation of the fine structure of the radial abundance pattern is the influence of the spiral arms, specifically the combined effect of the corotation resonance and turbulent diffusion. From our modelling, we conclude that in order to explain the bimodal radial distributions simultaneously for oxygen and iron and to obtain approximately equal total iron output from different types of supernovae, the mean ejected iron mass per supernova event should be the same as quoted in the literature if the maximum mass of stars, which eject heavy elements, is 50 M(circle dot). For the upper mass limit of 70 M(circle dot), the production of iron by a type II supernova explosion should increase by about 1.5 times.

The use of a gold disc microelectrode for the determination of copper in human sweat

A novel approach of using a gold disc microelectrode to analyze sweat samples for copper ions by anodic square wave stripping voltammetry (SW stripping voltammetry) is described Sweat was collected from the lower back of four subjects after physical exercise and the sample volume required for the determinations was 100 mu L. Under the optimized conditions the calibration plot was linear over the range 1-100 mu mol L(-1) Cu(II) with a limit of detection of 0 25 mu mol L(-1) The precision was evaluated by carrying out five replicate measurements in a 1 mu mol L(-1) Cu(II) solution and the standard deviation was found to be 1 5% Measurements were performed by inserting the microelectrode into sweat drops and Cu(II) concentrations in the analyzed samples ranged from 09 to 28 mu mol L(-1) Values obtained by the proposed voltammetric method agreed well with those found using graphite furnace atomic absorption spectroscopy (GFAAS) (C) 2010 Elsevier B V All rights reserved

Accelerated aging of thick glass second surface silvered reflectors under sandstorm conditions

Concentrated solar power systems are expected to be sited in desert locations where the direct normal irradiation is above 1800 kWh/m2.year. These systems include large solar collector assemblies, which account for a significant share of the investment cost. Solarreflectors are the main components of these solar collector assemblies and dust/sand storms may affect their reflectance properties, either by soiling or by surface abrasion. While soiling can be reverted by cleaning, surface abrasion is a non reversible degradation.The aim of this project was to study the accelerated aging of second surface silvered thickglass solar reflectors under simulated sandstorm conditions and develop a multi-parametric model which relates the specular reflectance loss to dust/sand storm parameters: wind velocity, dust concentration and time of exposure. This project focused on the degradation caused by surface abrasion.Sandstorm conditions were simulated in a prototype environmental test chamber. Material samples (6cm x 6cm) were exposed to Arizona coarse test dust. The dust stream impactedthese material samples at a perpendicular angle. Both wind velocity and dust concentrationwere maintained at a stable level for each accelerated aging test. The total exposure time in the test chamber was limited to 1 hour. Each accelerated aging test was interrupted every 4 minutes to measure the specular reflectance of the material sample after cleaning.The accelerated aging test campaign had to be aborted prematurely due to a contamination of the dust concentration sensor. A robust multi-parametric degradation model could thus not be derived. The experimental data showed that the specular reflectance loss decreasedeither linearly or exponentially with exposure time, so that a degradation rate could be defined as a single modeling parameter. A correlation should be derived to relate this degradation rate to control parameters such as wind velocity and dust/sand concentration.The sandstorm chamber design would have to be updated before performing further accelerated aging test campaigns. The design upgrade should improve both the reliability of the test equipment and the repeatability of accelerated aging tests. An outdoor exposure test campaign should be launched in deserts to learn more about the intensity, frequencyand duration of dust/sand storms. This campaign would also serve to correlate the results of outdoor exposure tests with accelerated exposure tests in order to develop a robust service lifetime prediction model for different types of solar reflector materials.

Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing

Stainless steels are well known to be prone to cold welding and material transfer in sliding contacts and therefore difficult to cold form unless certain precautions as discussed in this paper are taken. In the present study different combinations of tool steels/stainless steels/lubricants has been evaluated with respect to their galling resistance using pin-on-disc testing. The results show that a high galling resistance is favored by a high stainless steel sheet hardness and a blasted stainless steel sheet surface topography. The effect of type of lubricant was found to be more complex. For example, the chlorinated lubricants failed to prevent metal-to-metal contact on a brushed sheet surface but succeeded on a blasted sheet surface of the same stainless steel material. This is believed to be due to a protective tribofilm which is able to form on the blasted surface, but not on the brushed surface.

Thick viewing : empirical examples of condensed moments of narrative impact in fiction film developing theoretical concepts for intensified engagements

Abstract  In a case study about viewing habits in a Swedish audience I sampled 309 questionnaires; interviews with five focus group were conducted together with ten in-depth individual interviews discussing altogether fifteen favorite films exploring specific scenes of idiosyncratic relevance.  The outcome supports claims about viewers as active and playful (cf. Höijer 1998, Frampton 2006, Hoover 2006, Plantinga 2009). In line with mediatization theory I also argue that spiritual meaning making takes place through mediated experiences and I support theories about fiction films as important sources for moral and spiritual reflection (Partridge 2004, Zillman 2005, Lynch 2007, Plantinga 2009). What Hjarvard calls the soft side of mediatization processes (2008) is illustrated showing adults experiencing enchantment through favorite films (Jerslev 2006, Partridge 2008, Klinger 2008, Oliver & Hartmann 2010).  Vernacular meaning making embedded in everyday life and spectators dealing with fiction narratives such as Gladiator, Amelie from Montmartre or Avatar highlights the need for a more nuanced understanding of elevated cinematic experiences. The reported impact of specific movies is analyzed through theories where cognition and affect are central aspects of spectators’ engagements with a film (Tan 1996, Caroll 1999, Grodal 2009). Crucially important are theories of meaning-making where viewers’ detailed interpretation of specific scenes are embedded in high-level meaning-making where world view issues and spectators’ moral frameworks are activated (Zillman 2005, Andersson & Andersson 2005, Frampton 2006, Lynch 2007, Avila 2007, Axelson 2008, Plantinga 2009).  Also results from a growing body of empirical oriented research in film studies are relevant with an interest in what happens with the flesh and blood spectator exposed to filmic narratives (Jerslev 2006, Klinger 2008, Barker 2009, Suckfüll 2010, Oliver & Hartmann 2010). Analyzing the qualitative results of my case study, I want to challenge the claim that the viewer has to suspend higher order reflective cognitive structures in order to experience suture (Butler & Palesh 2004). What I find in my empirical examples is responses related to spectators’ highest levels of mental activity, all anchored in the sensual-emotional apparatus (Grodal 2009). My outcome is in line with a growing number of empirical case studies which support conclusions that both thinking and behavior are affected by film watching (Marsh 2007, Sückfull 2010, Oliver & Hartmann 2010, Axelson forthcoming). The presentation contributes to a development of concepts which combines aesthetic, affective and cognitive components in an investigation of spectator’s moves from emotional evaluation of intra-text narration to extra-textual assessments, testing the narrative for larger significance in idiosyncratic ways (Bordwell & Thompson 1997, Marsh 2007, Johnston 2007, Bruun Vaage 2009, Axelson 2011). There are a several profitable concepts suggested to embrace the complex interplay between affects, cognition and emotions when individuals respond to fictional narratives. Robert K. Johnston label it “deepening gaze” (2007: 307) and “transformative viewing” (2007: 305). Philosopher Mitch Avila proposes “high cognition” (2007: 228) and Casper Thybjerg ”higher meaning” (2008: 60). Torben Grodal talks about “feelings of deep meaning” (Grodal 2009: 149). With a nod to Clifford Geertz, Craig Detweiler adopts “thick description” (2007: 47) as do Kutter Callaway altering it to ”thick interpretations” (Callaway 2013: 203).  Frampton states it in a paradox; ”affective intelligence” (Frampton 2006: 166). As a result of the empirical investigation, inspired by Geertz, Detweiler & Callaway, I advocate thick viewing for capturing the viewing process of these specific moments of film experience when profound and intensified emotional interpretations take place. The author As a sociologist of religion, Tomas Axelsons research deals with people’s use of mediated narratives to make sense of reality in a society characterized by individualization, mediatization and pluralized world views.  He explores uses of fiction film as a resource in every day life and he is currently finishing his three year project funded by the Swedish Research Council: Spectator engagement in film and utopian self-reflexivity. Moving Images and Moved Minds. http://www.du.se/sv/AVM/Personal/Tomas-Axelson Bibliography Axelson, T. (Forthcoming 2014). Den rörliga bildens förmåga att beröra.[1] Stockholm: Liber Axelson, T. (In peer review). Vernacular Meaning Making. Examples of narrative impact in fiction film questioning the ’banal’ notion in mediatization theory. Nordicom Review. Nordicom Göteborg. Axelson, T. (2011). Människans behov av fiktion. Den rörliga bildens förmåga att beröra människan på djupet.[2]Kulturella perspektiv. Volume 2. Article retrieved from www.kultmed.umu.se/digitalAssets/74/74304_axelson-22011.pdf Axelson, Tomas (2010) “Narration, Visualization and Mind. Movies in everyday life as a resource for utopian self-reflection.” Paper presentation at CMRC, 7th Conference of Media, Religion & Culture in Toronto, Canada 9 – 13th August 2010. Axelson, Tomas (2008) Movies and Meaning. Studying Audience, Favourite Films and Existential Matters. Particip@tions : Journal of Audience and Reception Studies. Volume 5, (1). Doctoral dissertation summary. ACTA UNIVERSITATIS UPSALIENSIS. Article retrieved from http://www.participations.org/Volume%205/Issue%201%20-%20special/5_01_axelson.htm  [1] English translation: Moving Images and Moved Minds. [2] English translation: Our need for fiction. Deeply Moved by Moving Images. Cultural Perspectives.

Surface finishing of flat pieces when submitted to lapping kinematics on abrasive disc dressed under several overlap factors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effective monopoles within thick branes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Model to localize gauge and tensor fields on thick branes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of intrapulpal temperature change induced by visible light units on the metabolism of odontoblast-like cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Postsurgical stability of counterclockwise maxillomandibular advancement surgery: Affect of articular disc repositioning

Purpose: This study evaluated the affect of disc displacement and articular disc repositioning on stability after surgical counterclockwise rotation and advancement of the maxillomandibular complex.Patients and Methods: A total of 72 patients (59 females, 13 males), with an average age of 30 years (range, 15 to 60 years) were evaluated. The patients were divided into 3 groups. Group 1 (G1; n = 21), with healthy temporomandibular joints (TMJs), underwent double jaw surgery only. Group 2 (G2; n = 35), with articular disc dislocation, underwent articular disc repositioning using the Mitek anchor (Mitek Surgical Products, Westwood, MA) technique concomitantly with orthognathic surgery. Group 3 (G3; n = 16), with articular disc dislocation, underwent orthognathic surgery only. Average postsurgical follow-up was 31 months. Each patient's lateral cephalograms were traced, digitized twice, and averaged to estimate surgical changes and postsurgical stability.Results: After surgery, the occlusal plane angle was decreased significantly in all 3 groups: by -6.3 +/- -15.0 degrees in G1, by -9.6 +/- 4.8 degrees in G2, and by -7.1 +/- 4.8 degrees in G3. The maxillomandibular complex was advanced and rotated counterclockwise similarly in all 3 groups, with advancement at the menton of 12.4 +/- 5.5 mm in G1, 13.5 +/- 4.3 mm in G2, and 13.6 +/- 5.0 mm in G3; advancement at the B point of 9.5 +/- 4.9 mm in G1, 10.2 +/- 3.7 mm in G2, and 10.8 +/- 3.7 mm in G3; and advancement at the lower incisor edge of 7.1 +/- 4.6 mm in G1, 6.6 +/- 3.2 mm in G2, and 7.9 +/- 3.0 mm in G3. Postsurgery, the occlusal plane angle increased in G3 (2.6 +/- 3.8 degrees; 37% relapse rate) but remained stable in G1 and G2. Postsurgical mandibular changes in the horizontal direction demonstrated a significant relapse in G3 at the menton (-3.8 +/- 4.1 mm; 28%), the B point (-3.0 +/- 3.4 mm; 28%), and the lower incisor edge (-2.3 +/- 2.1 mm; 34%) but remained stable in G1 and G2.Conclusions: Maxillomandibular advancement with counterclockwise rotation of the occlusal plane is a stable procedure for patients with healthy TMJs and for patients undergoing simultaneous TMJ disc repositioning using the Mitek anchor technique. Those patients with preoperative TMJ articular disc displacement who underwent double-jaw surgery and no TMJ intervention experienced significant relapse. (C) 2008 American Association of Oral and Maxillofacial Surgeons.

Influence of human dentine on the antibacterial activity of self-etching adhesive systems against cariogenic bacteria

Objectives: The incorporation of antibacterial agents into adhesive systems has been proposed to eliminate residual bacteria from dentine. This study used the agar diffusion method to evaluate the antibacterial activity of Clearfil Protect Bond (CPB), Clearfil SE Bond (CSEB), Clearfil Tri-S Bond (C3SB) and Xeno-III (XIII) self-etching adhesive systems, with or without light-activation, against cariogenic bacteria, and to assess the influence of human dentine on the antibacterial activity of these materials.Methods: An aliquot of 10 mu l per material (and individual components) were pipetted onto paper and dentine discs distributed in Petri dishes containing bacterial culture in BHI agar. Positive control was 0.2% chlorhexidine digluconate (CHX).Results: After incubation, the adhesive components of CPB and CSEB, liquid A of XIII and C3SB did not present antibacterial activity when applied to paper discs. The non-light-activated CPB primer + adhesive promoted the greatest inhibition of Streptococcus mutans (p < 0.05), whereas with light-activation, there was no significant difference between primer + adhesive and primer alone. For Lactobacillus acidophilus, CPB primer presented the greatest antibacterial activity in both light-activation conditions (p < 0.05). Regarding the dentine discs, only CHX promoted an inhibitory effect, though less intense than on paper discs (p < 0.05). CHX presented greater antibacterial activity against S. mutans than against L. acidophilus (p < 0.05).Conclusions: Light-activation significantly reduced the antibacterial activity of the self-etching adhesive systems; MDPB incorporation contributed to the effect of adhesive systems against cariogenic bacteria; the components eluted from the adhesive systems were not capable to diffuse through 400 mu m-thick dentine disc to exert their antibacterial activity against cariogenic bacteria. (C) 2008 Elsevier Ltd. All rights reserved.

Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials

This study evaluated the influence of microwave disinfection on the strength of intact and relined denture bases. Water sorption and solubility were also evaluated. A heat-polymerized acrylic resin (Lucitone 550) was used to construct 4-mm-thick (n = 40) and 2-mm-thick (n = 160) denture bases. Denture bases (2mm) were relined with an autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Specimens were divided into four groups (n = 10): without treatment, one or seven cycles of microwave disinfection (650 W for 6 min), and water storage at 37 degrees C for 7 days. Specimens were vertically loaded (5 mm/min) until failure. Disc-shaped specimens (50 min x 0.5 mm) were fabricated (n = 10) to evaluate water sorption and solubility. Data on maximum fracture load (N), deflection (%), and solubility (%) were analyzed by two-way analysis of variance and Student-Newman-Keuls tests (alpha = 0.05). One cycle of microwave disinfection decreased the deflection at fracture and fracture energy of Tokuso Rebase Fast and New Truliner specimens. The strength of denture bases microwaved daily for 7 days was similar to the strength of those immersed in water for 7 days. Microwave disinfection increased the water sorption of all materials and affected the solubility of the reline materials. (C) 2007 Wiley Periodicals, Inc.

Mean-field equations for cigar- and disc-shaped Bose and Fermi superfluids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effective nonlinear Schrodinger equations for cigar-shaped and disc-shaped Fermi superfluids at unitarity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The analytic torsion of a disc

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)