A Business Incubator, Accelerator, or Coworking Space? Case Health Innovation Village at GE

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.

Innovation and Globalization Policy in Small Transition Countries ; Case study: Macedonia and Slovenia

Diese Arbeit befasst sich mit der Innovations- und Globalisierungspolitik in kleinen Transformationsländern am Beispiel Mazedoniens; diese wurde mit der Lage in Slowenien verglichen, einem Land von ungefähr gleicher Größe und mit gemeinsamer Vergangenheit als Teilrepublik der Jugoslawischen Föderation, aber mit einem wesentlich höheren ökonomischen Entwicklungsstand. Innovation wird dabei verstanden als „Herstellung, Anpassung und Ausnutzung von Neuerungen“, und sie wird durch das Umfeld, in dem sie stattfindet, beeinflusst. Anpassung und Ausnutzung sind gerade für kleine Transformationsländer von erheblicher Bedeutung, da ihre Fähigkeit zu Herstellung von Neuerungen sehr begrenzt sind. Die Rolle der Innovationspolitik besteht hierbei darin, institutionelle und organisationelle Regulierungen einzuführen, die ein günstiges Umfeld sowohl für Innovationen als auch für die Entwicklung eines nationalen Innovationssystems schaffen. Die Rolle der Politik besteht also nicht in der Innovation als solcher, sondern in der Herstellung der notwendigen Bedingungen für die Industrie und die Forschungseinrichtungen dahingehend zu schaffen, dass sie ihr Wissen, ihre Fertigkeiten und ihre praktischen Erfahrungen für innovative Tätigkeiten einsetzen können. Auf der einen Seite gibt es Institutionen und Organisationen, ohne die die Unternehmen rückständig und wenig leistungsstark wären (etwa das Patentamt oder Institutionen höherer Bildung), und auf der anderen Seite gibt es Institutionen und Organisationen, welche die Unternehmen dabei unterstützen, dass sie ihre Tätigkeit weiter unterstützen (z.B. durch Technologietransfer-Zentren und Netzwerke). Die Leistungen dieser Institutionen und Organisationen sind von großer Bedeutung für die nationalen Innovationssysteme und sollten ihrerseits durch Innovationspolitik unterstützt werden; dies bedeutet jedoch nicht, dass diese Leistungen vom Staat bereitgestellt werden, vielmehr sollte die Wirtschaftspolitik Möglichkeiten für die öffentlich/private oder sogar rein private Bereitstellung solcher Leistungen in Erwägung ziehen; dies würde nicht nur die Kosten für den Staat senken, sondern auch die Effizienz bei der Erstellung dieser Leistungen steigern. Die Arbeit kommt zu dem Schluss, dass das größte Problem der Innovationspolitik in Mazedonien darin besteht, dass es sie gar nicht gibt, und zwar nicht als Folge einer bewussten Entscheidung darüber. Tatsächlich müssen Ressourcen und Zeit für die Schaffung eines nationalen Innovationssystems eingesetzt werden mit Hilfe einer Politik, die sich auf die wesentlichen Umrisse konzentriert, wobei die Nachfrage nach Technologie im Unternehmensbereich gesteigert wird und das Wissen und das Informationsangebot restrukturiert wird. Dieses System muss offen sein, unter beständigem Verbesserungsdruck stehen und fähig sein, sich an Veränderungen anzupassen. Damit eine solche Politik erfolgreich ist, muss es einen Konsens darüber zwischen allen beteiligten Akteuren geben und darüber hinaus auch eine Kohärenz zwischen den verschiedenen politischen Institutionen. Das ist deswegen wichtig, weil der Innovationsprozess komplex ist und verschiedene Politikbereiche berührt. Ziel sollte die Schaffung eines Systems sein, das einerseits auf Autonomie und Kooperation aufbaut, andererseits aber auch Wettbewerb zwischen den beteiligten Institutionen und Organisationen fördert. Eine wichtige Bedingung für ein positives Investitionsklima im Bereich der Innovation ist die Erreichung von makroökonomischer Stabilität. Die gegenwärtige Situation ist gekennzeichnet durch Instabilität des Rechtswesens, durch Korruption und Probleme des Vertragsschutzes, die sowohl ausländische als auch inländische Akteure davon abhält, sich in wirtschaftlichen Aktivitäten in Mazedonien zu engagieren. Bei der Suche nach einem Ausweg aus diesen Problemen ist es wichtig für Mazedonien, von anderen Ländern wie Slowenien zu lernen, die ähnliche Probleme haben, aber auch schon Erfahrungen in der Problemlösung. Man muss dabei beachten, dass der Entwicklungsstand, das wirtschaftliche und das politische Umfeld in beiden Vergleichsländern sich erheblich unterscheiden, so dass die Lektionen, die Mazedonien von Slowenien lernen könnte, nicht direkt übertragen und kopiert werden können, sondern entsprechend angepasst werden müssen. Die vorliegende Arbeit liefert Einsichten in die Probleme der Innovationspolitik in Transformationsländern und liefert daher sowohl einen Anreiz als auch eine Quelle von Informationen für künftige Analysen der wirtschaftlichen Bedingungen und vor allem Innovationspolitik in Transformationsländern.

Markov Process Modeling of A System Under WIPLOAD Control

This paper analyzes a proposed release controlmethodology, WIPLOAD Control (WIPLCtrl), using a transfer line case modeled by Markov process modeling methodology. The performance of WIPLCtrl is compared with that of CONWIP under 13 system configurations in terms of throughput, average inventory level, as well as average cycle time. As a supplement to the analytical model, a simulation model of the transfer line is used to observe the performance of the release control methodologies on the standard deviation of cycle time. From the analysis, we identify the system configurations in which the advantages of WIPLCtrl could be observed.

The effects of information and communication technologies on the banking sector and the payments system

This dissertation studies the effects of Information and Communication Technologies (ICT) on the banking sector and the payments system. It provides insight into how technology-induced changes occur, by exploring both the nature and scope of main technology innovations and evidencing their economic implications for banks and payment systems. Some parts in the dissertation are descriptive. They summarise the main technological developments in the field of finance and link them to economic policies. These parts are complemented with sections of the study that focus on assessing the extent of technology application to banking and payment activities. Finally, it includes also some work which borrows from the economic literature on banking. The need for an interdisciplinary approach arises from the complexity of the topic and the rapid path of change to which it is subject. The first chapter provides an overview of the influence of developments in ICT on the evolution of financial services and international capital flows. We include main indicators and discuss innovation in the financial sector, exchange rates and international capital flows. The chapter concludes with impact analysis and policy options regarding the international financial architecture, some monetary policy issues and the role of international institutions. The second chapter is a technology assessment study that focuses on the relationship between technology and money. The application of technology to payments systems is transforming the way we use money and, in some instances, is blurring the definition of what constitutes money. This chapter surveys the developments in electronic forms of payment and their relationship to the banking system. It also analyses the challenges posed by electronic money for regulators and policy makers, and in particular the opportunities created by two simultaneous processes: the Economic and Monetary Union and the increasing use of electronic payment instruments. The third chapter deals with the implications of developments in ICT on relationship banking. The financial intermediation literature explains relationship banking as a type of financial intermediation characterised by proprietary information and multiple interactions with customers. This form of banking is important for the financing of small and medium-sized enterprises. We discuss the effects of ICT on the banking sector as a whole and then apply these developments to the case of relationship banking. The fourth chapter is an empirical study of the effects of technology on the banking business, using a sample of data from the Spanish banking industry. The design of the study is based on some of the events described in the previous chapters, and also draws from the economic literature on banking. The study shows that developments in information management have differential effects on wholesale and retail banking activities. Finally, the last chapter is a technology assessment study on electronic payments systems in Spain and the European Union. It contains an analysis of existing payment systems and ongoing or planned initiatives in Spain. It forms part of a broader project comprising a series of country-specific analyses covering ten European countries. The main issues raised across the countries serve as the starting point to discuss implications of the development of electronic money for regulation and policies, and in particular, for monetary-policy making.

Plant variety protection, innovation, and transferability: Some empirical evidence

Under the Agreement on Trade-Related Aspects of Intellectual Property Rights, all member-countries of the World Trade Organization are required to provide an "effective" system of plant variety protection within a specific time frame. In many developing countries, this has led to a divisive debate about the fundamental desirability of extending intellectual property rights to agriculture. Empirical studies on the economic impacts of plant variety protection, especially its ability to generate large private sector investments in plant breeding and to facilitate the transfer of technology, have been very limited. This paper examines two aspects of the international experience of plant variety protection: (a) the relationship between legislation, research, and development expenditures and plant variety protection grants, i.e., the innovation effect and (b) the role of plant variety protection in facilitating the flow of varieties across countries, i.e., the transferability effect.

Mapping IT innovation in Facilities Management

Over the past decade there has been significant growth in the facilities management (FM) sector resulting in a diverse and highly competitive marketplace. This marketplace engages contractors, in-house teams, suppliers, consultants and professional institutions. Many of these organisations have had to innovate to differentiate themselves from competitors. The subject of this paper is facilities management innovation. More specifically, it examines the introduction of information technology (IT) to support such innovations. Our understanding of how such innovations are brought about is scant. The intention of this paper is to examine the motivations and factors which have brought about ‘information system’ innovations in the sector based on an examination of a small but diverse collection of case studies. The study specifically considers the route by which the selected innovations came about and the way in which the innovation has diffused throughout the rest of the organisation. The IT innovations identified in case studies include whole life cost modelling, a content management solution, open book partnering, management information portal (fmNet), RFID technology, and capacity and capability planning. Taken together they characterise a sector that is using IT to codify and standardise information such that useful knowledge becomes widely dispersed.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new, ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply, chain from clients to consultants, contractors, subcontractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, bused on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with,with tendering are highly variable, 1-15%, depending upon what precisely, is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

Horses for courses: Relating innovation diffusion concepts to the stage of the diffusion process

The research uses a sociological perspective to build an improved, context specific understanding of innovation diffusion within the UK construction industry. It is argued there is an iterative interplay between actors and the social system they occupy that directly influences the diffusion process as well as the methodology adopted. The research builds upon previous findings that argued a level of best fit for the three innovation diffusion concepts of cohesion, structural equivalence and thresholds. That level of best fit is analysed here using empirical data from the UK construction industry. This analysis allows an understanding of how the relative importance of these concepts' actually varies within the stages of the innovation diffusion process. The conclusion that the level of relevance fluctuates in relation to the stages of the diffusion process is a new development in the field.

Understanding construction competitiveness: the contribution of system dynamics

Purpose – Construction sector competitiveness has been a subject of interest for many years. Research too often focuses on the means of overcoming the “barriers to change” as if such barriers were static entities. There has been little attempt to understand the dynamic inter-relationship between the differing factors which impinge upon construction sector competitiveness. The purpose of this paper is to outline the benefits of taking a systems approach to construction competitiveness research. Design/methodology/approach – The system dynamics (SD) modelling methodology is described. This can provide practitioners with “microworlds” within which they can explore the dynamic effects of different policy decisions. The data underpinning the use of SD was provided by interviews and case study research which allowed an understanding of the context within which practitioners operate. Findings – The over-riding conclusion is that the SD methodology has been shown to be capable of providing a means to assess the forces which shape the sustained competitiveness of construction firms. As such, it takes the assessment of strategic policy analysis in the construction sector onto a higher plane. The need to collect data and make retrospective assessments of competitiveness and strategic performance at the statistical level is not now the only modus operandi available. Originality/value – The paper describes a novel research methodology which points towards an alternative research agenda for construction competitiveness research.

Adaptive modelling with tunable RBF network using multi-innovation RLS algorithm assisted by swarm intelligence

In this paper, we propose a new on-line learning algorithm for the non-linear system identification: the swarm intelligence aided multi-innovation recursive least squares (SI-MRLS) algorithm. The SI-MRLS algorithm applies the particle swarm optimization (PSO) to construct a flexible radial basis function (RBF) model so that both the model structure and output weights can be adapted. By replacing an insignificant RBF node with a new one based on the increment of error variance criterion at every iteration, the model remains at a limited size. The multi-innovation RLS algorithm is used to update the RBF output weights which are known to have better accuracy than the classic RLS. The proposed method can produces a parsimonious model with good performance. Simulation result are also shown to verify the SI-MRLS algorithm.

Revisiting the emergence of the modern business enterprise: entrepreneurship and the Singer global distribution system

This paper approaches the question of why entrepreneurial firms exist from a broad business historical perspective. It observes that the original development of the modern business enterprise was very strongly associated with entrepreneurial innovation rather than an extension of managerial routine. The widely-used theory of the entrepreneur as a specialist in judgmental decision making is applied to the particular point in time when entrepreneurs had to develop novel organizational designs in what Chandler described as the prelude to the ‘managerial revolution’. The paper illustrates how the theory of entrepreneurship then best explains the rise of the modern corporation by focusing on the case study of vertical integration par excellence, Singer.

Innovation in construction: a sociology of technology approach

An alternative approach to understanding innovation is made using two intersecting ideas. The first is that successful innovation requires consideration of the social and organizational contexts in which it is located. The complex context of construction work is characterized by inter-organizational collaboration, a project-based approach and power distributed amongst collaborating organizations. The second is that innovations can be divided into two modes: ‘bounded’, where the implications of innovation are restricted within a single, coherent sphere of influence, and ‘unbounded’, where the effects of implementation spill over beyond this. Bounded innovations are adequately explained within the construction literature. However, less discussed are unbounded innovations, where many firms' collaboration is required for successful implementation, even though many innovations can be considered unbounded within construction's inter-organizational context. It is argued that unbounded innovations require an approach to understand and facilitate the interactions both within a range of actors and between the actors and technological artefacts. The insights from a sociology of technology approach can be applied to the multiplicity of negotiations and alignments that constitute the implementation of unbounded innovation. The utility of concepts from the sociology of technology, including ‘system building’ and ‘heterogeneous engineering’, is demonstrated by applying them to an empirical study of an unbounded innovation on a major construction project (the new terminal at Heathrow Airport, London, UK). This study suggests that ‘system building’ contains outcomes that are not only transformations of practices, processes and systems, but also the potential transformation of technologies themselves.

UK innovation systems for new and renewable energy technologies: drivers, barriers and systems failures

A better understanding of the systemic processes by which innovation occurs is useful, both conceptually and to inform policymaking in support of innovation in more sustainable technologies. This paper analyses current innovation systems in the UK for a range of new and renewable energy technologies, and generates policy recommendations for improving the effectiveness of these innovation systems. Although incentives are in place in the UK to encourage innovation in these technologies, system failures—or ‘gaps’—are identified in moving technologies along the innovation chain, preventing their successful commercialisation. Sustained investment will be needed for these technologies to achieve their potential. It is argued that a stable and consistent policy framework is required to help create the conditions for this. In particular, such a framework should be aimed at improving risk/reward ratios for demonstration and pre-commercial stage technologies. This would enhance positive expectations, stimulate learning effects leading to cost reductions, and increase the likelihood of successful commercialisation.

Implementing ‘Site BIM’: a case study of ICT innovation on a large hospital project

Numerous Building Information Modelling (BIM) tools are well established and potentially beneficial in certain uses. However, issues of adoption and implementation persist, particularly for on-site use of BIM tools in the construction phase. We describe an empirical case-study of the implementation of an innovative ‘Site BIM’ system on a major hospital construction project. The main contractor on the project developed BIM-enabled tools to allow site workers using mobile tablet personal computers to access design information and to capture work quality and progress data on-site. Accounts show that ‘Site BIM’, while judged to be successful and actively supporting users, was delivered through an exploratory and emergent development process of informal prototyping. Technical IT skills were adopted into the construction project through personal relationships and arrangements rather than formal processes. Implementation was driven by construction project employees rather than controlled centrally by the corporate IT function.