1000 resultados para Suspended Aggregate


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of the study is to investigate the suitability of using Pulse-coherent Acoustic Doppler Profiler (PCADP) to estimate suspended sediment concentration (SSC). The acoustic backscatter intensity was corrected for spreading and absorption loss, then calibrated with OBS and finally converted to SSC. The results show that there is a good correlation between SSC and backscatter intensity with R value of 0.74. The mean relative error is 22.4%. Then the time span of little particle size variation was also analyzed to exclude the influence of size variation. The correlation coefficient increased to 0.81 and the error decreased to 18.9%. Our results suggest that the PCADP can meet the requirement of other professional instruments to estimate SSC with the errors between 20% and 50%, and can satisfy the need of dynamics study of suspended particles.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A new expression for calculating suspended fine-sediment deposition rate is developed based on theoretic analysis and experiments. The resulting equation is applied to simulation of fine sediment deposition in the reclaimed land in the Hangzhou Bay, China. The hydrodynamic environment in this area is solved by use of a long wave model, which gives the 2D-velocity field and considers bathymetric changes due to fine sediment deposition. The expression is proved convenient to use in engineering practice, and the predicted deposition rate agrees with the annual data available from field measurements from the first year to the third year after the construction of the long groin as a reclaiming method.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Based on the Estuarine, Coastal and Ocean Modeling System with Sediments (ECOMSED) model, a 3-D hydrodynamic-transport numerical model was established for the offshore area near the Yangtze Estuary in the East China Sea. The hydrodynamic module was driven by tide and wind. Sediment module included sediment resuspension, transport and deposition of cohesive and non-cohesive sediment. The settling of cohesive sediment in the water column was modeled as a function of aggregation (flocculation) and deposition. The numerical results were compared with observation data for August, 2006. It shows that the sediment concentration reduces gradually from the seashore to the offshore area. Numerical results of concentration time series in the observation stations show two peaks and two valleys, according with the observation data. It is mainly affected by tidal current. The suspended sediment concentration is related to the tidal current during a tidal cycle, and the maximum concentration appears 1 h-4 h after the current maximum velocity has reached.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

To study the relationship between sediment transportation and saltwater intrusion in the Changjiang (Yangtze) estuary, a three-dimensional numerical model for temperature, salinity, velocity field, and suspended sediment concentration was established based on the ECOMSED model. Using this model, sediment transportation in the flood season of 2005 was simulated for the Changjiang estuary. A comparison between simulated results and observation data for the tidal level, flow velocity and direction, salinity and suspended sediment concentration indicated that they were consistent in overall. Based on model verification, the simulation of saltwater intrusion and its effect on sediment in the Changjiang estuary was analyzed in detail. The saltwater intrusion in the estuary including the formation, evolution, and disappearance of saltwater wedge and the induced vertical circulation were reproduced, and the crucial impact of the wedge on cohesive and non-cohesive suspended sediment distribution and transportation were successfully simulated. The result shows that near the salinity front, the simulated concentrations of both cohesive and non-cohesive suspended sediment at the surface layer had a strong relationship with the simulated velocity, especially when considering a 1-hour lag. However, in the bottom layer, there was no obvious correlation between them, because the saltwater wedge and its inducing vertical circulation may have resuspended loose sediment on the bed, thus forming a high-concentration area near the bottom even if the velocity near the bottom was very low during the transition phase from flood to ebb.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We examined the growth, survival and immune response of the scallop, Chlamys farreri, during a 1-year period in deep water of Haizhou Bay. Scallops were cultured using two methods: (1) in lantern nets at a 5 m depth and (2) in a bottom culture system (sleeves) on the seabed at about a 25 m depth. Shell heights, meat dry weight and immune activities in the haemolymph (superoxide dismutase and myeloperoxidase) were measured bimonthly or quarterly from July 2007 to June 2008. Survival was measured at the end of the study and environmental parameters in the experimental layers were monitored during the experiment. The growth and immune activities of scallops were lower when the water temperature was high, which was consistent with the main mortality occurring in summer. The growth and immunity of scallops were higher in the suspended culture than in the bottom culture during the experiment, with the exception of shell growth during the last study period. Survival of scallops in the suspended culture (54.6 +/- 12.3%) was significantly lower than that in the bottom culture (86.8 +/- 3.5%) at the end of this study. We conclude from our results that the high mortality of C. farreri can be prevented by culturing them in a bottom culture system before November of the first year, and then transferring them to a suspended culture to improve scallop production.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Suspended particulate matter (SPM), sediments and clams were collected at three sites in Jiaozhou Bay to assess the magnitude of trace metal pollution in the area. Metal concentrations in SPM (Cu: 40.11-203; Zn: 118-447; Pb: 50.1-132; Cd: 0.55-4.39; Cr: 147.6-288; Mn: 762-1670 mu g/g), sediments (Cu: 17.64-34.26; Zn: 80.79-110; Pb: 24.57-49.59; Cd: 0.099-0.324; Cr: 41.6-88.1; Mn: 343-520 mu g/g) and bivalves (Cu: 6.41-19.76; Zn: 35.5-85.5; Pb: 0.31-1.01; Cd: 0.51-0.67; Mn: 27.45-67.6 mu g/g) are comparable to those reported for other moderately polluted world environments. SPM showed a less clear pattern. Metal concentrations in sediments displayed a clear geographical trend with values increasing with proximity to major urban centers. The clams (on dry weight) showed a complex pattern due to the variability introduced by age-related factors. Cd showed an apparent reverse industrial trend with higher concentrations in clams collected at distant stations. Zn, Pb and Mn showed no clear geographical pattern, whereas Cu increased in the clams collected in the most industrialized area. In addition, the bioaccumulation factors (BAF) were calculated. The result indicated that the studied Ruditapes philippinarum in Jiaozhou Bay possessed different bioaccumulation capacities for Cd, Zn, Cu, Pb and Mn, and Cd, Zn had a relatively high assimilation of those metals from sediment particles. A significant relationship with clam age was observed for Zn (positive) and Cu (negative) suggesting different physiological requirements for both metals with age. Trace metal concentrations measured in the tissue of the investigated clam were in the range considered safe by the WHO for human use.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The growth and survival of the Zhikong scallop Chlamys farreri suspended in deep water of Haizhou Bay were studied from July 2007 to June 2008, and the biodeposition method was used to estimate the clearance rate of C. farreri under field conditions. Results showed that the scallop grew fast during all the culture time, with the exception of summer. The condition index of the scallop increased with time and reached the highest value in spring of the second year. The survival of scallops was 60.8 +/- A 3.9% at the end of this study, mortality occurring mainly during the summer and autumn of the first year. The clearance rate fluctuated obviously with season,with the highest value in September 2007, and the lowest value in March 2008. Factors accounting for variations in growth and clearance rate of scallops are also discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this PhD study, mathematical modelling and optimisation of granola production has been carried out. Granola is an aggregated food product used in breakfast cereals and cereal bars. It is a baked crispy food product typically incorporating oats, other cereals and nuts bound together with a binder, such as honey, water and oil, to form a structured unit aggregate. In this work, the design and operation of two parallel processes to produce aggregate granola products were incorporated: i) a high shear mixing granulation stage (in a designated granulator) followed by drying/toasting in an oven. ii) a continuous fluidised bed followed by drying/toasting in an oven. In addition, the particle breakage of granola during pneumatic conveying produced by both a high shear granulator (HSG) and fluidised bed granulator (FBG) process were examined. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. It was observed that the least amount of breakage occurred in the straight pipe while the most breakage occurred at 90° bend pipe. Moreover, lower levels of breakage were observed in two 45° bend pipe than the 90° bend vi pipe configuration. In general, increasing the impact angle increases the degree of breakage. Additionally for the granules produced in the HSG, those produced at 300 rpm have the lowest breakage rates while the granules produced at 150 rpm have the highest breakage rates. This effect clearly the importance of shear history (during granule production) on breakage rates during subsequent processing. In terms of the FBG there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. A population balance model was developed to analyse the particle breakage occurring during pneumatic conveying. The population balance equations that govern this breakage process are solved using discretization. The Markov chain method was used for the solution of PBEs for this process. This study found that increasing the air velocity (by increasing the air pressure to the rig), results in increased breakage among granola aggregates. Furthermore, the analysis carried out in this work provides that a greater degree of breakage of granola aggregates occur in line with an increase in bend angle.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Imprisonment is the most severe penalty utilised by the criminal courts in Ireland. In recent decades the prison population has grown significantly despite expressions both official and public to reduce the use of the sanction. Two other sanctions are available to the Irish sentencer which may be used as a direct and comparable sentence in lieu of a term of imprisonment namely, the community service order and the suspended sentence. The community service order remains under-utilised as an alternative to the custodial sentence. The suspended sentence is used quite liberally but its function may be more closely related to the aim of deterrence rather than avoiding the use of the custodial sentence. Thus the aim of decarceration may not be optimal in practice when either sanction is utilised. The decarcerative effect of either sanction is largely dependent upon the specific purpose which judges invest in the sanction. Judges may also be inhibited in the use of either sanction if they lack confidence that the sentence will be appropriately monitored and executed. The purpose of this thesis is to examine the role of the community service order and the suspended sentence in Irish sentencing practice. Although community service and the suspended sentence present primarily as alternatives to the custodial sentence, the manner in which the judges utilise or fail to utilise the sanctions may differ significantly from this primary manifestation. Therefore the study proceeds to examine the judges' cognitions and expectations of both sanctions to explore their underlying purposes and to reveal the manner in which the judges use the sanctions in practice. To access this previously undisclosed information a number of methodologies were deployed. An extensive literature review was conducted to delineate the purpose and functionality of both sanctions. Quantitative data was gathered by way of sampling for the suspended sentence and the part-suspended sentence where deficiencies were apparent to show the actual frequency in use of that sanction. Qualitative methodologies were used by way of focus groups and semi-structured interviews of judges at all jurisdictional levels to elucidate the purposes of both sanctions. These methods allowed a deeper investigation of the factors which may promote or inhibit such usage. The relative under-utilisation of the community service order as an alternative to the custodial sentence may in part be explained by a reluctance by some judges to equate it with a real custodial sentence. For most judges who use the sanction, particularly at summary level, community service serves a decarcerative function. The suspended sentence continues to be used extensively. It operates partly as a decarcerative penalty but the purpose of deterrence may in practice overtake its theoretical purpose namely the avoidance of custody. Despite ongoing criticism of executive agencies such as the Probation Service and the Prosecution in the supervision of such penalties both sanctions continue to be used. Engagement between the Criminal Justice actors may facilitate better outcomes in the use of either sanction. The purposes for which both sanctions are deployed find their meaning essentially in the practices of the judges themselves as opposed to any statutory or theoretical claims upon their use or purpose.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Human mesenchymal stem cells (hMSCs) and three-dimensional (3D) woven poly(ɛ-caprolactone) (PCL) scaffolds are promising tools for skeletal tissue engineering. We hypothesized that in vitro culture duration and medium additives can individually and interactively influence the structure, composition, mechanical, and molecular properties of engineered tissues based on hMSCs and 3D poly(ɛ-caprolactone). Bone marrow hMSCs were suspended in collagen gel, seeded on scaffolds, and cultured for 1, 21, or 45 days under chondrogenic and/or osteogenic conditions. Structure, composition, biomechanics, and gene expression were analyzed. In chondrogenic medium, cartilaginous tissue formed by day 21, and hypertrophic mineralization was observed in the newly formed extracellular matrix at the interface with underlying scaffold by day 45. Glycosaminoglycan, hydroxyproline, and calcium contents, and alkaline phosphatase activity depended on culture duration and medium additives, with significant interactive effects (all p < 0.0001). The 45-day constructs exhibited mechanical properties on the order of magnitude of native articular cartilage (aggregate, Young's, and shear moduli of 0.15, 0.12, and 0.033 MPa, respectively). Gene expression was characteristic of chondrogenesis and endochondral bone formation, with sequential regulation of Sox-9, collagen type II, aggrecan, core binding factor alpha 1 (Cbfα1)/Runx2, bone sialoprotein, bone morphogenetic protein-2, and osteocalcin. In contrast, osteogenic medium produced limited osteogenesis. Long-term culture of hMSC on 3D scaffolds resulted in chondrogenesis and regional mineralization at the interface between soft, newly formed engineered cartilage, and stiffer underlying scaffold. These findings merit consideration when developing grafts for osteochondral defect repair.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Economic analyses of climate change policies frequently focus on reductions of energy-related carbon dioxide emissions via market-based, economy-wide policies. The current course of environment and energy policy debate in the United States, however, suggests an alternative outcome: sector-based and/or inefficiently designed policies. This paper uses a collection of specialized, sector-based models in conjunction with a computable general equilibrium model of the economy to examine and compare these policies at an aggregate level. We examine the relative cost of different policies designed to achieve the same quantity of emission reductions. We find that excluding a limited number of sectors from an economy-wide policy does not significantly raise costs. Focusing policy solely on the electricity and transportation sectors doubles costs, however, and using non-market policies can raise cost by a factor of ten. These results are driven in part by, and are sensitive to, our modeling of pre-existing tax distortions. Copyright © 2006 by the IAEE. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Magnetic suspension is a technique for processing pure or reactive materials without contact to walls. This work is concerned with the flow in the rapidly deforming liquid volume, suspended in an AC magnetic field. Intense flow motion due to the induced electromagnetic force distorts dynamically the droplet envelope. The relative positional change between the liquid surface and the surrounding coil means that fluid flow and magnetic field computations need to be closely coupled. The computed results are compared against a physical experiment and nearly spherical analytic solutions. A comparison between the "magetic pressure" approximation and the full electromagnetic force solutions shows fundamental differences; the full electromagnetic force is necessary for accurate results in most practical applications of this technique. The physical reason for the fundamental discrepancy is the difference in the electromagnetic force representation: only the gradient part of the full force is accounted for in the "magnetic pressure" approximation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Electromagnetic Levitation (EML) is a valuable method for measuring the thermo-physical properties of metals - surface tensions, viscosity, thermal/electrical conductivity, specific heat, hemispherical emissivity, etc. – beyond their melting temperature. In EML, a small amount of the test specimen is melted by Joule heating in a suspended AC coil. Once in liquid state, a small perturbation causes the liquid envelope to oscillate and the frequency of oscillation is then used to compute its surface tension by the well know Rayleigh formula. Similarly, the rate at which the oscillation is dampened relates to the viscosity. To measure thermal conductivity, a sinusoidally varying laser source may be used to heat the polar axis of the droplet and the temperature response measured at the polar opposite – the resulting phase shift yields thermal conductivity. All these theoretical methods assume that convective effects due to flow within the droplet are negligible compared to conduction, and similarly that the flow conditions are laminar; a situation that can only be realised under microgravity conditions. Hence the EML experiment is the method favoured for Spacelab experiments (viz. TEMPUS). Under terrestrial conditions, the full gravity force has to be countered by a much larger induced magnetic field. The magnetic field generates strong flow within the droplet, which for droplets of practical size becomes irrotational and turbulent. At the same time the droplet oscillation envelope is no longer ellipsoidal. Both these conditions invalidate simple theoretical models and prevent widespread EML use in terrestrial laboratories. The authors have shown in earlier publications that it is possible to suppress most of the turbulent convection generated in the droplet skin layer, through use of a static magnetic field. Using a pseudo-spectral discretisation method it is possible compute very accurately the dynamic variation in the suspended fluid envelope and simultaneously compute the time-varying electromagnetic, flow and thermal fields. The use of a DC field as a dampening agent was also demonstrated in cold crucible melting, where suppression of turbulence was achieved in a much larger liquid metal volume and led to increased superheat in the melt and reduction of heat losses to the water-cooled walls. In this paper, the authors describe the pseudo-spectral technique as applied to EML to compute the combined effects of AC and DC fields, accounting for all the flow-induced forces acting on the liquid volume (Lorentz, Maragoni, surface tension, gravity) and show example simulations.