Estudo da viabilidade técnica para obtenção de superfície duplex em aço inoxidável martensítico AISI 410 através do processo de deposição a plasma por gaiola catódica

The technique of plasma nitriding by the cathode cage mainly stands out for its ability to produce uniform layers, even on parts with complex geometries. In this study, it was investigated the efficiency of this technique for obtaining duplex surface, when used, simultaneously, to nitriding treatment and thin film deposition at temperatures below 500°C. For this, were used samples of AISI 41 0 Martensitic Stainless Steel and performed plasma treatment, combining nitriding and deposition of thin films of Ti and/or TiN in a plasma atmosphere containing N2-H2. It was used a cathodic cage of titanium pure grade II, cylindrical with 70 mm diameter and 34 mm height. Samples were treated at temperature 420ºC for 2 and 12 hours in different working pressures. Optical Microscopy (OM), Scanning Electron Microscopy (SEM) with micro-analysis by Energy Dispersive Spectroscopy (EDS), X-Ray Diffraction (XRD), Atomic Force Microscopy (AFM) and analysis of Vickers Microhardness were used to investigate coating properties such as homogeneity and surface topography, chemical composition, layer thickness, crystalline phase, roughness and surface microhardness. The results showed there is a direct proportionality between the presence of H2 in plasma atmosphere and the quantity of titanium in surface chemical composition. It was also observed that the plasma treatment at lowpressure is more effective in formation of TiN thin film

Influência de tratamentos térmicos no comportamento mecânico da blenda poli(metacrilato de metila) / poli(tereftalato de etileno) reciclado

Studies indicate that a variation in the degree of crystallinity of the components of a polymer blend influences the mechanical properties. This variation can be obtained by subjecting the blend to heat treatments that lead to changes in the spherulitic structure. The aim of this work is to analyze the influence of different heat treatments on the variation of the degree of crystallinity and to establish a relationship between this variation and the mechanical behavior of poly(methyl methacrylate)/poly(ethylene terephthalate) recycled (PMMA / PETrec) with and without the use of compatibilizer agent poly(methyl methacrylate-al-glycidyl methacrylate-al-ethyl acrylate) (MMAGMA- EA). All compositions were subjected to two heat treatments. T1 heat treatment the samples were treated at 130 ° C for 30 minutes and cooled in air. In T2, the samples were treated at 230 ° C for 5 minutes and cooled to approximately -10 ° C. The variation of the degree of crystallinity was determined by the proportional relationship between crystallinity and density, with the density measured by pycnometry. The mechanical behavior was verified by tensile tests with and without the presence of notches and pre-cracks, and by method of fracture toughness in plane strain (KIC). We used the scanning electron microscopy (SEM) to analyze the fracture surface of the samples. The compositions subjected to heat treatment T1, in general, showed an increase in the degree of crystallinity in tensile strength and a tendency to decrease in toughness, while compositions undergoing treatment T2 showed that the opposite behavior. Therefore, this work showed that heat treatment can give a polymer blend further diversity of its properties, this being caused by changes in the crystal structure

Atividade antibacteriana das plantas copaifera duckei dwyer e pseudobombax marginatum e sua interação com a superfície celular bacteriana

A resistência microbiana a antimicrobianos tem favorecido a busca por substâncias bioativas provenientes de plantas usadas na medicina popular, com o intuito de se obter novos fármacos com atividade antimicrobiana. Neste estudo, foi proposta a investigação da atividade antibacteriana do óleo-resina de Copaifera duckei e de diferentes extratos da casca de Pseudobombax marginatum, e seus possíveis mecanismos de ação. O potencial inibitório antibacteriano foi avaliado utilizando-se os métodos de difusão e diluição em ágar, e a bioautografia. O mecanismo de ação foi analisado por microscopia eletrônica, no qual se observou alterações na ultraestrutura bacteriana, e por eletroforese em SDS-PAGE, que determinou ação sobre as proteínas das superfícies celulares. A análise química foi realizada pelas técnicas de Espectrometria de massas acoplada ao Cromatógrafo a gás- EM/CG (C. duckei) e Cromatografia Líquida de Alta Eficiência- CLAE (P. marginatum). Entre as bactérias estudadas, B. cereus foi a mais suscetível às plantas em estudo, com concentrações inibitórias mínimas (CIMs) correspondentes a 0,3125 mg/mL para o óleo-resina de copaíba, e 0,5 mg/mL para extrato hidroalcoólico (1:1) e 0,512 mg/mL para a fração butanólica da casca P. marginatum, nos quais pôde-se observar alterações na parede celular do B. cereus, com remoção da camada S, espessamento da parede celular e formação de diversos septos nos centros de divisão celular. A análise química por EM/CG mostrou compostos terpênicos no óleo-resina de C. duckei, tendo como composto majoritário o β-bisaboleno, e a análise por CLAE mostrou a presença de compostos derivados da catequina na casca do P. marginatum. Desta forma, as plantas em estudo mostram um potencial antibacteriano considerável, podendo contribuir tanto na terapia antimicrobiana como na área de alimentos, tendo como um de seus prováveis sítios de ação a parede celular bacteriana

Avaliação de características morfométricas na relação solo-superfície da Bacia Hidrográfica do Córrego Rico, Jaboticabal (SP)

Com a análise das características morfométricas procura-se entender a relação solo-superfície, em decorrência dos processos erosivos sobre estruturas e litologias variadas. Neste trabalho, objetivou-se avaliar as características morfométricas do padrão de drenagem e do relevo em microbacias hidrográficas de 2ª ordem de magnitude, em Latossolo Vermelho-Escuro e Argissolo Vermelho-Amarelo, com vistas ao planejamento agroambiental da Bacia Hidrográfica do Córrego Rico, município de Jaboticabal, SP. O estudo foi baseado em fotografias aéreas, pancromáticas, verticais na escala 1:35.000 da região administrativa de Ribeirão Preto. Com técnicas de fotointerpretação, foram traçadas a rede de drenagem e respectivas microbacias hidrográficas, onde as variáveis selecionadas foram determinadas. As classes de risco de degradação, resultando no uso potencial do solo, foram determinadas de acordo com o coeficiente de rugosidade. As características do padrão de drenagem e do relevo repercutiram no comportamento hidrológico e litológico das microbacias hidrográficas, possibilitando a diferenciação entre as unidades de solos. A densidade de drenagem e a amplitude altimétrica foram as características que mais contribuíram para o poder discriminatório na relação solo-superfície. Na análise conjunta do potencial de uso do solo, verificou-se, principalmente, adequação para agricultura nos Latossolos e pecuária e, ou, reflorestamento nos Argissolos.

Influência do teor de água na superfície do solo sobre a eficácia e seletividade do flazasulfuron, na cultura de cana-de-açúcar

Objetivou-se avaliar a eficácia e a seletividade do herbicida flazasulfuron aplicado em pré-emergência de Panicum maximum, Brachiaria plantaginea e Digitaria horizontalis e das plantas de cana-de-açúcar, em solos argilosos com diferentes teores de água na superfície, após os primeiros cinco dias da aplicação. Foram testadas as seguintes doses de flazasulfuron isolado: 37,5; 50,0; e 75,0 g ha-1. O herbicida foi misturado, na menor dose (37,5 g ha-1), com ametrine e diuron, ambos a 1.000 g ha¹, e com acetochlor na dose de 1.536 g ha-1. Esses tratamentos foram comparados aos padrões comerciais: isoxaflutole (112,5 g ha-1), tebuthiuron (1.000 g ha-1), sulfentrazone (800 g ha-1) e diuron + hexazinone (1.500 g ha-1). Mantiveram-se as testemunhas capinada e infestada. Todos os herbicidas foram seletivos aos cultivares de cana-de-açúcar testados (RB 845257 e RB 855536). O herbicida flazasulfuron, bem como alguns padrões comerciais, proporcionou ótimos níveis de controle das plantas daninhas onde o solo se encontrava com bons teores de água nesse período. Os resultados foram insatisfatórios - sobretudo para o flazasulfuron isolado ou em misturas com ametrine, acetochlor e diuron - para o controle de P. maximum e B. plantaginea em solo com menor teor de água na superfície. Com a dose de 37,5 g ha-1 do flazasulfuron, o controle de B. plantaginea aos 90 dias após a aplicação, foi de 42,5% em função da redução do teor de água de 22% (CC) a 7,1%, na camada de 0 a 2,5 cm do solo. O controle aumentou para 97,5% quando a variação foi de 25% a 21%.

Pressão e temperatura da água de lavagem na população microbiana da superfície de carcaças bovinas

The aimm of this study was to evaluate the influence of washing water temperature and pressure on mesophilic and psycluotrophic aerobic bacterial populations, yeasts and molds, total conforms and fecal coliforms population, whereas the cattle carcass surface may become contaminated during the different slaughter procedures and the final carcass washing may reduce microbial population Samples were taken by sponge swabbing in four areas of carcass surface (flank, neck, chest and rump), from which 20 were washed with write, at 25 degrees C and without artificial pressure, 20 with water under a pressure of 3atm, 20 with water at 40 degrees C and without artificial pressure and 20 with water at 40 degrees C under a pressure of 3atm For control purpose and using the same method to collect more 20 carcasses samples were taken without washing., loading 100 samples The results showed that the water at 25 degrees C undo 3atm pressure was more efficient to remove microorganisms from carcass surface than the heated water, although this latter promoter a mote visible clean carcasses

Alterações em atributos químicos do solo pela aplicação de calcário na superfície ou incorporado

The application of lime oil the soil surface is necessary in son-le agricultural situations. The objective of this work was to verify changes ill chemical attributes of a medium texture soil as a result of lime application with and without amending. The experiment was carried out in a laboratory setting, in PVC columns, in a completely randomized design, with a 2 x 4 factorial design and a control, with four replicates, totaling 36 columns. The treatments were the combination of two little rates (4 and 2 t ha(-1)) and four types of little application (oil surface without amending, and amending in layers of 0 to 5; 0 to 10 and 0 to 20 cm depths), in addition to the control, to which lime was not applied. After 326 days of soil incubation with lime, there was a corrective effect front the lime until 5 cm or 10 cm below the depth in which there was the application or amending. The application of little resulted in increases of soil base saturation until 10 cm of depth, and until 40 cut of depth when the little was amended in the layers of 0 to 5, 0 to 10 or 0 to 20 cm depth.

Estudo do comportamento no estado fresco e endurecido do concreto com incorporação de resíduo de corte de botão

This works aims at investigating the effects of adding waste from RCBP-polyester button manufacturing to Portland cement concrete, particularly regarding its consistency and mechanic strength. The RCBP used came from a button factory located in Parnamirim, RN, Brazil. The waste was added to the concrete on different ratios: 5 %, 10 %, 15 % and 20 % of the total cement mass. A sample of concrete without the RCBP was used as reference, 1:1,33:2,45:0,50. For the mechanic strength test four samples were tested with different ages (3, 7 and 28 days old) and mixtures. Furthermore, a Slump Test was also conducted in order to verify the concrete s consistency. A tendency to a reduction in the compression resistance was noticed for all samples. For the samples with 5 % and 10 %, there was also an increase in the traction resistance during inflexion, regarding the reference concrete. In the microstructural analysis, the RBCP was observed to show an irregular and porous surface, thus explaining the consistency decrease

Análise de estruturas de superfície delgadas axissimétricas via método dos elementos finitos com utilização de elemento retilíneo

The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions

Modelagem de dados de falhas de equipamentos de sub-superfície em poços de petróleo da Bacia Potiguar

This master´s thesis presents a reliability study conducted among onshore oil fields in the Potiguar Basin (RN/CE) of Petrobras company, Brazil. The main study objective was to build a regression model to predict the risk of failures that impede production wells to function properly using the information of explanatory variables related to wells such as the elevation method, the amount of water produced in the well (BSW), the ratio gas-oil (RGO), the depth of the production bomb, the operational unit of the oil field, among others. The study was based on a retrospective sample of 603 oil columns from all that were functioning between 2000 and 2006. Statistical hypothesis tests under a Weibull regression model fitted to the failure data allowed the selection of some significant predictors in the set considered to explain the first failure time in the wells

Variação anual de características morfológicas e da temperatura de superfície do pelame de vacas da raça Holandesa em ambiente semiárido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa da radiação solar global diária em função do potencial de energia solar na superfície do solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de onda completa de superfície seletiva em freqüência do tipo anteparo duplo

This work presents a theoretical analysis and numerical and experimental results of the scattering characteristics of frequency selective surfaces, using elements of type patch perfectly conductor. The structures are composed of two frequency selective surfaces on isotropic dielectric substrates cascaded, separated by a layer of air. The analysis is performed using the method of equivalent transmission line in combination with the Galerkin method, to determine the transmission and reflection characteristics of the structures analyzed. Specifically, the analysis uses the impedance method, which models the structure by an equivalent circuit, and applies the theory of transmission lines to determine the dyadic Green's function for the cascade structure. This function relates the incident field and surface current densities. These fields are determined algebraically by means of potential incidents and the imposition of the continuity of the fields in the dielectric interfaces. The Galerkin method is applied to the numerical determination of the unknown weight coefficients and hence the unknown densities of surface currents, which are expanded in terms of known basis functions multiplied by these weight coefficients. From the determination of these functions, it becomes possible to obtain numerical scattered fields at the top and bottom of the structures and characteristics of transmission and reflection of these structures. At work, we present numerical and experimental results for the characteristics of transmission and reflection. Comparisons were made with other results presented in literature, and it was observed a good agreement in the cases presented suggestions continuity of the work are presented

Produção de fitomassa e acúmulo de nutrientes pela aveia-preta em função da aplicação de calcário e gesso em superfície na implantação do sistema plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema inteligente para detecção de manchas de óleo na superfície marinha através de imagens de SAR

Oil spill on the sea, accidental or not, generates enormous negative consequences for the affected area. The damages are ambient and economic, mainly with the proximity of these spots of preservation areas and/or coastal zones. The development of automatic techniques for identification of oil spots on the sea surface, captured through Radar images, assist in a complete monitoring of the oceans and seas. However spots of different origins can be visualized in this type of imaging, which is a very difficult task. The system proposed in this work, based on techniques of digital image processing and artificial neural network, has the objective to identify the analyzed spot and to discern between oil and other generating phenomena of spot. Tests in functional blocks that compose the proposed system allow the implementation of different algorithms, as well as its detailed and prompt analysis. The algorithms of digital image processing (speckle filtering and gradient), as well as classifier algorithms (Multilayer Perceptron, Radial Basis Function, Support Vector Machine and Committe Machine) are presented and commented.The final performance of the system, with different kind of classifiers, is presented by ROC curve. The true positive rates are considered agreed with the literature about oil slick detection through SAR images presents