On the use of discrete cosine transforms for multicarrier communications

In this correspondence, the conditions to use any kind of discrete cosine transform (DCT) for multicarrier data transmission are derived. The symmetric convolution-multiplication property of each DCT implies that when symmetric convolution is performed in the time domain, an element-by-element multiplication is performed in the corresponding discrete trigonometric domain. Therefore, appending symmetric redun-dancy (as prefix and suffix) into each data symbol to be transmitted, and also enforcing symmetry for the equivalent channel impulse response, the linear convolution performed in the transmission channel becomes a symmetric convolution in those samples of interest. Furthermore, the channel equalization can be carried out by means of a bank of scalars in the corresponding discrete cosine transform domain. The expressions for obtaining the value of each scalar corresponding to these one-tap per subcarrier equalizers are presented. This study is completed with several computer simulations in mobile broadband wireless communication scenarios, considering the presence of carrier frequency offset (CFO). The obtained results indicate that the proposed systems outperform the standardized ones based on the DFT.

Three-Dimensional Analysis of Spiny Dendrites Using Straightening and Unrolling Transforms

Current understanding of the synaptic organization of the brain depends to a large extent on knowledge about the synaptic inputs to the neurons. Indeed, the dendritic surfaces of pyramidal cells (the most common neuron in the cerebral cortex) are covered by thin protrusions named dendritic spines. These represent the targets of most excitatory synapses in the cerebral cortex and therefore, dendritic spines prove critical in learning, memory and cognition. This paper presents a new method that facilitates the analysis of the 3D structure of spine insertions in dendrites, providing insight on spine distribution patterns. This method is based both on the implementation of straightening and unrolling transformations to move the analysis process to a planar, unfolded arrangement, and on the design of DISPINE, an interactive environment that supports the visual analysis of 3D patterns.

Solution of optimal continuous low-thrust transfer using Lie transforms

This paper addresses the problem of optimal constant continuous low-thrust transfer in the context of the restricted two-body problem (R2BP). Using the Pontryagin’s principle, the problem is formulated as a two point boundary value problem (TPBVP) for a Hamiltonian system. Lie transforms obtained through the Deprit method allow us to obtain the canonical mapping of the phase flow as a series in terms of the order of magnitude of the thrust applied. The reachable set of states starting from a given initial condition using optimal control policy is obtained analytically. In addition, a particular optimal transfer can be computed as the solution of a non-linear algebraic equation. Se investiga el uso de series y transformadas de Lie en problemas de optimización de trayectorias de satélites impulsados por motores de bajo empuje

Structuring research methods and data with the research object model: genomics workflows as a case study

Background: One of the main challenges for biomedical research lies in the computer-assisted integrative study of large and increasingly complex combinations of data in order to understand molecular mechanisms. The preservation of the materials and methods of such computational experiments with clear annotations is essential for understanding an experiment, and this is increasingly recognized in the bioinformatics community. Our assumption is that offering means of digital, structured aggregation and annotation of the objects of an experiment will provide necessary meta-data for a scientist to understand and recreate the results of an experiment. To support this we explored a model for the semantic description of a workflow-centric Research Object (RO), where an RO is defined as a resource that aggregates other resources, e.g., datasets, software, spreadsheets, text, etc. We applied this model to a case study where we analysed human metabolite variation by workflows. Results: We present the application of the workflow-centric RO model for our bioinformatics case study. Three workflows were produced following recently defined Best Practices for workflow design. By modelling the experiment as an RO, we were able to automatically query the experiment and answer questions such as “which particular data was input to a particular workflow to test a particular hypothesis?”, and “which particular conclusions were drawn from a particular workflow?”. Conclusions: Applying a workflow-centric RO model to aggregate and annotate the resources used in a bioinformatics experiment, allowed us to retrieve the conclusions of the experiment in the context of the driving hypothesis, the executed workflows and their input data. The RO model is an extendable reference model that can be used by other systems as well.

Fluorescence tomographic imaging in turbid media using early-arriving photons and Laplace transforms

We present a multichannel tomographic technique to detect fluorescent objects embedded in thick (6.4 cm) tissue-like turbid media using early-arriving photons. The experiments use picosecond laser pulses and a streak camera with single photon counting capability to provide short time resolution and high signal-to-noise ratio. The tomographic algorithm is based on the Laplace transform of an analytical diffusion approximation of the photon migration process and provides excellent agreement between the actual positions of the fluorescent objects and the experimental estimates. Submillimeter localization accuracy and 4- to 5-mm resolution are demonstrated. Moreover, objects can be accurately localized when fluorescence background is present. The results show the feasibility of using early-arriving photons to image fluorescent objects embedded in a turbid medium and its potential in clinical applications such as breast tumor detection.

Retrovirus-mediated gene transfer of MLL-ELL transforms primary myeloid progenitors and causes acute myeloid leukemias in mice

The MLL-ELL fusion gene results from the translocation t(11;19)(q23;p13.1) that is associated with de novo and therapy-related acute myeloid leukemia. To study its transforming properties, we retrovirally transduced primary murine hematopoietic progenitors and assessed their growth properties both in vitro and in vivo. MLL-ELL increased the proliferation of myeloid colony-forming cells in methylcellulose cultures upon serial replating, whereas overexpression of ELL alone had no effect. We reconstituted lethally irradiated congenic mice with bone marrow progenitors transduced with MLL-ELL or the control MIE vector encoding the enhanced green fluorescent protein. When the peripheral blood of the mice was analyzed 11–13 weeks postreconstitution, we found that the engraftment of the MLL-ELL-transduced cells was superior to that of the MIE controls. At this time point, the contribution of the donor cells was normally distributed among the myeloid and nonmyeloid compartments. Although all of the MIE animals (n = 10) remained healthy for more than a year, all of the MLL-ELL mice (n = 20) succumbed to monoclonal or pauciclonal acute myeloid leukemias within 100–200 days. The leukemic cells were readily transplantable to secondary recipients and could be established as immortalized cell lines in liquid cultures. These studies demonstrate the enhancing effect of MLL-ELL on the proliferative potential of myeloid progenitors as well as its causal role in the genesis of acute myeloid leukemias.

Structuring the pre-search reference interview: a useful technique for handling clinical questions*

Objectives: To explore whether structuring a literature search request form according to an evidence-based medicine (EBM) anatomy elicits more information, improves precision of search results, and is acceptable to participating librarians.

The hybrid PAX3-FKHR fusion protein of alveolar rhabdomyosarcoma transforms fibroblasts in culture.

Pediatric alveolar rhabdomyosarcoma is characterized by a chromosomal translocation that fuses parts of the PAX3 and FKHR genes. PAX3 codes for a transcriptional regulator that controls developmental programs, and FKHR codes for a forkhead-winged helix protein, also a likely transcription factor. The PAX3-FKHR fusion product retains the DNA binding domains of the PAX3 protein and the putative activator domain of the FKHR protein. The PAX3-FKHR protein has been shown to function as a transcriptional activator. Using the RCAS retroviral vector, we have introduced the PAX3-FKHR gene into chicken embryo fibroblasts. Expression of the PAX3-FKHR protein in these cells leads to transformation: the cells become enlarged, grow tightly packed and in multiple layers, and acquire the ability for anchorage-independent growth. This cellular transformation in vitro will facilitate studies on the mechanism of PAX3-FKHR-induced oncogenesis.

Geographical structuring in the mtDNA of Italians.

Geographical patterns of mtDNA variation were studied in 12 Italian samples (1072 individuals) by two different spatial autocorrelation methods. Separate analyses of the frequencies of 12 restriction morphs show North-South clines, differences between Sardinia and the mainland populations, and the effects of isolation by distance. A recently developed autocorrelation statistic summarizing molecular similarity at all sites (AIDA; autocorrelation index for DNA analysis) confirms the presence of a clinical pattern; differences between random pairs of haplotypes tend to increase with their geographical distance. The partition of gene diversity, however, reveals that most variability occurs within populations, whereas differences between populations are minor (GST = 0.057). When the data from the 12 samples are pooled, two descriptors of genetic variability (number of polymorphic sites and average sequence difference between pairs of individuals) do not behave as expected under neutrality. The presence of clinal patterns, Tajima's tests, and a simulation experiment agree in suggesting that population sizes increased rapidly in Italy and Sicily but not necessarily so in Sardinia. The distribution of pairwise sequence differences in the Italian peninsula (excluding Sardinia) permits a tentative location of the demographic increase between 8000 and 20,500 years ago. These dates are consistent with archaeological estimates of two distinct expansion processes, occurring, respectively, in the Neolithic and after the last glacial maximum in the Paleolithic. Conversely, there is no genetic evidence that such processes have had a major impact on the Sardinian population.

A new boundary-based morphological model

Mathematical morphology addresses the problem of describing shapes in an n-dimensional space using the concepts of set theory. A series of standardized morphological operations are defined, and they are applied to the shapes to transform them using another shape called the structuring element. In an industrial environment, the process of manufacturing a piece is based on the manipulation of a primitive object via contact with a tool that transforms the object progressively to obtain the desired design. The analogy with the morphological operation of erosion is obvious. Nevertheless, few references about the relation between the morphological operations and the process of design and manufacturing can be found. The non-deterministic nature of classic mathematical morphology makes it very difficult to adapt their basic operations to the dynamics of concepts such as the ordered trajectory. A new geometric model is presented, inspired by the classic morphological paradigm, which can define objects and apply morphological operations that transform these objects. The model specializes in classic morphological operations, providing them with the determinism inherent in dynamic processes that require an order of application, as is the case for designing and manufacturing objects in professional computer-aided design and manufacturing (CAD/CAM) environments. The operators are boundary-based so that only the points in the frontier are handled. As a consequence, the process is more efficient and more suitable for use in CAD/CAM systems.

Identification, quantification and structuring of two-lane rural highway safety problems and solutions. Volume I - technical report. Final report.

Federal Highway Administration, Washington, D.C.

WALSHSTORE : the application of burst processing to fail-soft storage systems using Walsh transforms /

"UILU-ENG 77 1753."

Colftar: a real-time electro-optical system for two dimensional Fourier transforms /

Thesis--University of Illinois.

The structuring and analysis of complex system problems.

"A paper presented at the Operations Research Society of America, Nineteenth National Meeting, Chicago, Illinois, May 25-26, 1961."

Structuring U.S. forces after the Cold War : costs and effects of increased reliance on the reserves.

"September 1992"--Cover.