Soluções cosmológicas e locais para uma eletrodinâmica modificada

The present work investigates some consequences that arise from the use of a modifed lagrangean for the eletromagnetic feld in two diferent contexts: a spatially homogeneous and isotropic universe whose dynamics is driven by a magnetic feld plus a cosmological parameter A, and the problem of a static and charged point mass (charged black hole). In the cosmological case, three diferent general solutions were derived. The first, with a null cosmological parameter A, generalizes a particular solution obtained by Novello et al [gr-qc/9806076]. The second one admits a constant A and the third one allows A to be a time-dependent parameter that sustains a constant magnetic feld. The first two solutions are non-singular and exhibit in ationary periods. The third case studied shows an in ationary dynamics except for a short period of time. As for the problem of a charged point mass, the solutions of the Einstein-Maxwell equations are obtained and compared with the standard Reissner-Nordstrom solution. Contrary to what happens in the cosmological case, the physical singularity is not removed

Avaliação do comportamento de argila ativada na presença de água destilada, soluções salinas e inibidores de hidratação catiônicos

The clay swelling is today one of the major problems during the well drilling. Nearly 50% of clays that constitute shale expand easily in the presence of water molecules. During the drilling of a geological formation containing swelling clays, when is feasible the use of water base fluids, it is necessary to apply clay inhibitors. This avoids the incorporation of the cutting to the drilling fluid which is responsible for the wall swelling and crumbling. The aim of this work was to evaluate the synergistic behavior that occurs when swelling clay inhibitors are associated to NaCl and KCl salts. Three swelling clay inhibitors samples, INIB A, INIB B and INIB C, were analyzed. Each inhibitor was characterized by the amount of chlorides and active matter content. For the water-clay interaction evaluation in the presence of various fluids, it was used the Capillary Suction Timer (CST, Fann) and Linear Swell Meter (LSM 2000, Fann). For better interpretation of results, a Design of Experiments (DOE, Umetrics MODDE 7.0 TM) through Result Surface Methodology (RSM) was employed, taking into account the type, the swelling inhibitors concentration and the contact time with the clay. The results showed different efficiencies among the inhibitors employed, and the salt-inhibitors mixtures were more efficient than those products alone. However, for field operation, other parameters should be taking into account, as operational cost, environmental requests and time of application for each product

Adsorção de Mn (II) e Zn (II) em soluções aquosas usando perlita expandida revestida com quitosana

In this work, chitosan was used as a coating of pure perlite in order to increase the accessibility of the groups OH- e NH2+the adsorptionof ions Mn2+ e Zn2+.The characterization results of the expanded perlite classified as microporous and whose surface area 3,176 m2 g-1after the change resulted in 4,664 m2g-1.From the thermogravimetry(TG) it was found that the percentage of coating was34,3%.The infrared analysis can prove the presence of groups Si-OH, Si-O e Al-O-Siresulting from the perlite and C=O, NH2and OH characterization of chitosan. The experiments on experiments on the adsorption of Mn and Zn were performed in the concentration range of10 a 50 mgL-1and the adsorption capacity inpH 5,8 e 5,2 was 19,49 and 23,09 mgg-1to 25 oC,respectively.The adsorption data were best fitted to Langmuir adsorption model to Langmuir adsorption model for both metalionsisindicative of monolayer adsorption. The kinetics of adsorption were calculated from the equation of Lagergren fitting the model pseudo-second-order for all initial concentrations, suggesting that adsorption of ions Mn2+ and Zn2+ follows the kinetics of pseudo-second-order and whose constant Speedk2(g/mg.min) are 0,105 e 3,98 and capacity and maximum removal qe 4,326 e 3,348,respectively.In this study we used a square wave voltammetry cathodic stripping voltammetry to quantify the adsorbed ions, and the working electrode glassy carbon, reference electrode silver / silver chloride and a platinum auxiliary electrode. The attainment of the peaks corresponding to ions Mn2+ and Zn2+ was evaluated in and electrochemical cell with a capacity of 30 mL using a buffer system (Na2HPO4/NaH2PO4)at pH 4 and was adjusted with solutionsH3PO4 0,1molL-1and NaOH 0,1 molL-1and addition of the analyte has been a cathodic peak in- 0,873 Vand detection limit of2,55x10-6molL-1para Zn.The dough used for obtaining the adsorption isotherm was 150 mg and reached in 120 min time of equilibrium for both metal ions.The maximum adsorption for 120 min with Mn concentration 20 mgL-1 and Zn 10 mgL-1,was91, 09 e 94, 34%, respectively

Caracterização do processo de gelificação de soluções quitosana utilizando reometria e espalhamento dinâmico da luz

Gels consist of soft materials with vast use in several activities, such as in pharmaceutical industry, food science, and coatings/textile applications. In order to obtain these materials, the process of gelification, that can be physical (based on physical interactions) and/or chemical (based on covalent crosslinking), has to be carried out. In this work we used dynamic light scattering (DLS) and rheometry to monitor the covalent gelification of chitosan solutions by glutaraldehyde. Intensity correlation function (ICF) data was obtained from DLS and the exponential stretched Kohrausch-William-Watts function (KWW) was fitted to them. The parameters of the KWW equation, β, Γ and C were evaluated. These methods were effective in clarifying the process of sol-gel transition, with the emergence of non-ergodicity, and determining the range of gelation observed in about 10-20 minutes. The dependence between apparent viscosity on reaction time was used to support the discussion proposed.

Caracterização de soluções de quitosana por espalhamento dinâmico de luz

Dynamic light scattering was used to monitor relaxation processes in chitosan solutions at concentrations within the semi-dilute and concentrated regimes, Kowhlrausch-Williams-Watts (KWW) equation being successfully fitted to intensity correlation function data. The dependence of KWW equation parameters on chitosan concentration indicated that an increase in concentration from semi-dilute to concentrated regimes resulted in narrowing the distribution of relaxation rates; temperature dependence indicated the relaxation process as described as an energy activated process, whose parameters were function of the interaction between chitosan chains (enthalpy of activation) and rigidity of chitosan conformations (pre-exponential factor)

Estudo da mistura comercial dolomita-quartzo, dopada com Hg(I), Cd(II) e Cr(III), para adsorção de H2S

The present work was to carry out a study on the adsorption of hydrogen sulfide (H2S) in arrays synthesized from a commercial clay mineral formed by a mixture of dolomite and quartz. To produce the ion exchange matrix were made using aqueous solutions of salts of cobalt II chloride hexahydrate (CoCl2.6H2O) II cadmium nitrate tetrahydrate (Cd (NO3)2.4H2O) I mercuric chloride (HgCl) nitrate and chromium III pentahydrate (Cr (NO3)3.5H2O). The arrays were subjected to hydrogen sulphide gas passage for one hour. To check the amount of gas adsorbed was used gravimetric process. The best result was in the adsorption matrix doped with cadmium and the solution retained for a longer time than the largest amount of H2S was the cobalt matrix. The matrix unmodified exhibited poor adsorption capacity. The characterization of the matrices were used XRD, XRF and IV. Mother with cadmium showed a high capacity in ion exchange, because the percentage of cadmium increased from 0% to 81.38% by replacing atoms of calcium and silicon which increased from 96.54% to 17.56% and 15, 72% to 0.32%, respectively, but also the best performance in adsorption of H2S adsorbing 11.89507 mg per gram of matrix

Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Características biométricas de mudas de Tabebula chrysotricha(standl.) formadas em diferentes substratos e soluções de fertirrigação, quando plantadas em campo

Este trabalho objetivou estudar as características biométricas de plantas de ipê-amarelo (Tabebuia chrysotricha Standl.) formadas, na fase de viveiro, em função de quatro substratos, variando as soluções de fertirrigação. Para compor os substratos, foram utilizadas fibras de coco fibrosa e granulada, formando os tratamentos 100% fibrosa, 60% fibrosa e 40% granulada, 40% fibrosa e 60% granulada e 100% granulada. A adubação de base foi igual em todos os tratamentos, e as soluções de adubação variaram, a fim de se obterem soluções completas com condutividades elétricas de 1,06 dS m-1; 2,12 dS m-1; 3,2 dS m-1; e 4,24 dS m¹. As sementes foram colocadas diretamente nos tubetes (120 mL) contendo os respectivos substratos e receberam as fertirrigações por subsuperfície uma vez por semana, respeitando-se os tratamentos de adubação. Quando as mudas atingiram aproximadamente 20 cm de altura, elas foram realocadas sob tela de 9% de sombreamento, onde permaneceram até o plantio, em Taubaté, SP. Mudas produzidas em fibra de coco 100% granulada alcançaram, em campo, maiores alturas, diâmetros de coleto e número de folhas. Apesar das diferentes soluções de fertirrigação aplicadas, as alturas de parte aérea se igualaram a partir dos 167 dias após o plantio em campo. Recomendase a produção de mudas de ipê-amarelo (T. chrysotricha) em substratos contendo fibra de coco granulada e soluções de fertirrigação com condutividade elétrica de 1,06 dS m-1.

Manutenção da qualidade de rosas cortadas cv. Vega em soluções conservantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos hemodinâmicos e metabólicos imediatos determinados pelas soluções de cloreto de sódio a 7,5% e de sua associação ao dextran 70 a 6% na reanimação do choque hemorrágico: estudo experimental em cães

JUSTIFICATIVA E OBJETIVOS: O dextran associado à solução hipertônica de cloreto sódio a 7,5% apresenta efeitos hemodinâmicos benéficos no controle prolongado da reanimação no choque hemorrágico. O objetivo deste estudo foi verificar se a associação do dextran à solução de cloreto de sódio a 7,5% apresentaria vantagens na avaliação imediata dos parâmetros hemodinâmicos e metabólicos na reanimação em modelo de choque hemorrágico controlado em cães. MÉTODO: Foram estudados 16 cães submetidos à hemorragia controlada até que a pressão arterial média atingisse 40 mmHg e permanecesse assim por até 30 minutos. Estes foram divididos em G1, com administração de NaCI a 7,5%, e G2, com administração NaCI a 7,5% combinada com dextran 70 a 6%, no volume de 4 mL.kg-1, durante três minutos. Foram avaliados os parâmetros hemodinâmicos e metabólicos. Consideraram-se quatro momentos: M1 - 10 minutos após o preparo cirúrgico, M2 - obtido na metade da fase de choque, M3 - obtido dois minutos após o final da administração das soluções, M4 - 30 minutos após o início da reanimação. RESULTADOS: Após a reanimação, não houve diferença significativa dos valores da FC, PAM, PCP e IRVS. O G2 apresentou valores maiores do IC em M4. Os valores da SvO2 foram menores no G1, final do experimento. A C(a-v)O2 foi maior no G1 nos momentos M3 e M4. Os valores do VO2 aumentaram nos dois grupos em M4 e os valores do lactato plasmático aumentaram progressivamente até M3 e diminuíram em M4. Houve aumento dos valores do Na plasmático e redução do hematócrito nos dois grupos. CONCLUSÕES: O G2 mostrou melhor desempenho hemodinâmico principalmente após 30 minutos do início da reanimação. Observou-se, também, maior expansão plasmática e melhor perfusão tecidual na associação do dextran ao NaCl a 7,5%.

Soluções conservantes em sorvetão pós-colheita

O objetivo deste trabalho foi estudar alguns aspectos da fisiologia pós-colheita de inflorescências de sorvetão cultivadas no Submédio São Francisco. Hastes florais recém-colhidas foram submetidas a diferentes tratamentos (água destilada; 75mg L-1 de nitrato de prata - AgNO3; 1000mg L-1 de cloreto de cobalto - CoCl2; 5mg L-1 de ácido giberélico - GA3 - Progibb® e 10mg L-1 de 6-Benzilaminopurina - BAP), em ambiente com temperatura e umidade controlada por 15 dias. A vida pós-colheita foi acompanhada a partir da escala de notas, da massa da matéria fresca e do consumo da solução conservante. O tratamento com AgNO3 em hastes de sorvetão, foi o mais eficiente na manutenção da vida de vaso de sorvetão, porém, devido a sua toxidez, recomenda-se o uso de GA3.

Eficiência de absorção, transporte e utilização de macronutrientes por porta-enxertos de caramboleira, cultivados em soluções nutritivas

O estado nutricional de plantas cultivadas em solução nutritiva pode ser influenciado pelo tipo de solução utilizada, afetando desta forma seu adequado crescimento. Com este trabalho, objetivou-se avaliar a exigência nutricional de porta-enxertos de caramboleira, cultivados em quatro diferentes soluções nutritivas. O delineamento experimental empregado foi inteiramente casualizado, com três repetições, tendo como tratamentos as quatro soluções. Como solução padrão foi utilizada a de Hoagland & Arnon, comparada à outras três soluções. O experimento foi conduzido em condições de casa-de-vegetação, em recipientes plásticos com 8 L de capacidade. Após 150 dias do transplantio, foram determinados a matéria seca e o teor de nutrientes, inferindo-se o conteúdo dos macronutrientes na planta. Com esses resultados calculou-se os índices: eficiência de absorção; eficiência de transporte e eficiência de utilização dos nutrientes. As soluções nutritivas de Sarruge, de Castellane & Araújo e de Furlani foram semelhantes na produção de matéria seca das plantas de caramboleira. O uso da solução nutritiva de Hoagland & Arnon resultou em menor produção de matéria seca das caramboleiras, e, também, menor eficiência de utilização de Ca e Mg pelas plantas. A eficiência de transporte dos nutrientes foi a mais afetada pelas soluções nutritivas utilizadas, enquanto a eficiência de utilização dos nutrientes sofreu pouca variação em função das soluções empregadas.

Soluções de manutenção na pós-colheita de Chrysanthemum morifolium cv. Dragon

O desenvolvimento e uso de técnicas que prolonguem a durabilidade das flores, mantendo a qualidade do produto, é imprescindível para redução de perdas pós-colheita. Objetivou-se, neste trabalho, avaliar soluções de manutenção, associadas ou não a sacarose, na manutenção da qualidade pós-colheita de hastes de crisântemos. O experimento foi conduzido sob delineamento inteiramente casualizado, em esquema fatorial, com cinco tratamentos e três repetições, com 2 hastes florais cada uma. Os tratamentos utilizaram água destilada; 8-HQC a 100 mg L-1; 8-HQC a 100 mg L-1 + sacarose a 50 g L-1, 8-HQC a 200 mg L-1; 8-HQC a 200 mg L-1 + sacarose a 50 g L-1. Foram feitas avaliações físicas: coloração, massa fresca e conteúdo relativo de água (CRA); avaliações químicas: açúcares redutores e pigmentos; e avaliações qualitativas: turgescência, cor das flores, e número de botões, flores entreabertas e abertas. A combinação de 8-HQC 200 mg L-1 + sacarose a 50 g L-1 foi a que apresentou melhor desempenho para a manutenção da qualidade das hastes florais, favorecendo a abertura de botões e a turgescência das lígulas. A sacarose contribuiu para uma melhor manutenção de substâncias de reserva na haste, que tiveram a sua vida de vaso estendida.

Concentração de flúor e solubilidade em esmalte de dentes decíduos permanentes jovens após aplicações tópicas de soluções fluoretadas.

The aim of this article was to compare, through the distillation method, the incorporated amount of fluoride and the reduction of solubility in the enamel of both deciduous and young permanent teeth, following topical application of a 2% neutral sodium fluoride solution, according to the Knutson's technique and a 1.23% of acidulated solution, according to the Wellock & Brudevold's technique. The greatest fluoride incorporation was observed in the deciduous teeth after the usage of the 2% neutral solution. The amount of calcium and phosphorus liberation by the acid solution was greatest in the control group, followed by the group of teeth treated in acidulated solution and, finally, by those treated in 2% sodium fluoride solution.

Efeito do nitrato e nitrito na corrosão das ligas de alumínio 2024 e 7050 em soluções de NaCl

The 2024-T3 and 7050-T7 aluminium alloys electrochemical behavior has been studied in NaCl 5% neutral solutions and 0,1M concentration containing NO 3 - or NO 2 -. The current job supports corrosion research on aluminium alloys used in aeronautic industry. Open circuit potential, polarisation curves and electrochemical impedance spectroscopy techniques have been used. In chloride solutions, alloys corrosion takes place through a pitting mechanism. Added anions to aerated solutions do not possess inhibition effect. In deaerated solutions, nitrite has diminished anodic dissolution rate, probably by incorporating this anion in the oxide and/or hydroxide film.