Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Estudo da formulação de massas cerâmicas provenientes da região do Seridó-RN para fabricação de telhas

This work has for objective study compared the characteristics and technological properties of ceramic bodies from the region of Seridó-RN. The region under study has identified 23 cities where they were 80 ceramics industries. To define the universe of search, there was a survey of pottery that are part of APL Seridó next to the IEL. The characteristics and operating conditions of ceramics industries of the region were identified through a socio-economic questionnaire applied locally, which addressed issues such as: profiles of companies, production process etc. The analysis of information collected from 24 companies identified in seven cities shows that the vast majority of industries is small, with family structure, obsolete equipment and labo, little qualified. Most of the pottery works with low technical knowledge, poor control of the production process and product technology. The raw collected were submitted to analysis of X ray diffraction, chemical composition, termical analysis, particle size distribution and plasticity. Then were produced five formulations and made by uniaxial pressure at 25 MPa for firing in temperatures varying from 850 to 1050 °C. The firing technological properties evaluated were: mass loss to fire, lineal shrinkage, apparent density, apparent porosity, water absorption and flexural strength (3 points). The results indicated that the raw materials from the region have significant similarities in the composition chemical and mineralogical. Furthermore, it indicates the possibility of the use of cycles of firing faster and efficient than the current, limited to some clay mass burning of certain conditions

Formulação e caracterização de massas de grês porcelanato preparadas a partir de matérias-primas naturais do Rio Grande do norte e com adição de chamote de telhas

Traditional ceramics have an important role in the economy of Rio Grande do Norte. The local industries manufacture over 50 million shingles a month, corresponding to 60% of their overall production. As a result of processing flaws, roughly 20% of the production must be discarded, since little or no use has been envisaged for such fired components. Therefore, the use of this kind of residue, especially in the composition of other ceramic materials, comes as an interesting option from the economical and environmental point of view. In this scenario, the objective of the present study was to assess the effect of the addition of fired shingle waste in the composition of porcelainized stoneware tiles. To that end, two porcelainized stoneware tiles compositions were initially prepared. Subsequently, contents from 10 to 30% of roofing tiles chamote were added to each one of them. All raw materials and grog were characterized by FRX, XRD, and thermal analysis. The ceramics were fired using natural gas for 30 min at different temperatures, i.e. 1150, 1200 and 1250ºC, and fully characterized. The addition of roofing tiles chamote resulted in composition with superior properties compared to additive-free compositions. Porcelainized stoneware tiles products that fulfill required standards for practical applications were achieved

Two new species of Brachycephalus (Anura : Brachycephalidae) from the Atlantic Forest in Parana State, Southern Brazil

Two new species of brachycephalid frogs are described from Pico Marumbi, municipality of Morretes, and Pico da Igreja, municipality of Guaratuba, Parana State, southern Brazil. The new species share the following attributes: body bufoniform; skin on top of the head, and central part of the back body smooth with no dermal co-ossification; outer metatarsal tubercle distinct; dermal roofing bones of skull unornamented; all paired cranial bones distinct and not fused; quadratojugals, and maxillary odontoids present. The new species from Pico Marumbi is characterized by male SVL = 11.6-12.5 and female SVL = 13.0-14.5 turn; and general color orange with dorsal reddish-brown irregular markings, lateral surfaces with small dark brown spots, and belly with brownish spots and small dots. The new species from Pico da Igreja is characterized by male SVL = 12.6-13.9 and female SVL = 14.6-15.3 mm; and general color orange, lateral surfaces with small dark brown spots, and belly with brownish coalescent spots and small dots. Comparisons with other brachycephalid species and osteological data are provided.

Comparison of environmental indicators of two aviaries for laying Hens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise comparativa do ambiente de aviários de postura com diferentes sistemas de acondicionamento

Poulty house typology and the materials used (mainly for roofing) are the determining factors for an appropriate thermal condition aiming at production. In this context, the main point of this paper was to identify differences in the internal environment of two poultry houses, using monitoring and afterwards using statistics for comparing the environmental variables. The data analyzed did not show evidence of better thermal comfort for the house which was covered with ceramic roofing tile, because this house did not have ridged vents, making the hot air exit from the house difficult by the chimney effect. The ammonia concentration measured inside both houses was within the comfort limit. The temperature and humidity index of the house covered with ceramic roofing tiles was higher than the house which was covered with cement asbestos roofing tile, even though lower temperature on the tiles' surfaces was verified, showing the positive effects of the use of ridge vents at the housing. Based on the results obtained it is recommended for the Bastos, SP region, that poulty houses should be built with the ridge vent and long eaves beyond the roof of ceramic tiles.

Determinação teórico-experimental da rigidez ao cisalhamento devido à restrição das telhas conectadas nas terças

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do sombreamento natural de duas espécies arbóreas na temperatura de edificações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de formulação de massas através do controle da mistura: argilas aluvionares do pólo cerâmico de Russas-Ceará

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Tela de sombreamento e pintura em telhados de modelos reduzidos de galpões avícolas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Proveniência das rochas metassedimentares do Cinturão Araguaia com base em datações Pb-Pb em zircão e idades-modelo Sm-Nd

Este trabalho apresenta dados geocronológicos ²⁰⁷Pb/²⁰⁶Pb de grãos detríticos de zircão obtidos pelo método de evaporação de chumbo e idades-modelo Sm-Nd (T_DM) de rochas metassedimentares do Cinturão Araguaia, e discute as possíveis áreas-fonte dessas rochas, buscando investigar a história evolutiva deste cinturão no contexto da amalgamação do Gondwana. As datações em grãos detríticos de zircão de quartzitos da Formação Morro do Campo apontaram idades arqueanas (3,0-2,65 Ga) para o domínio norte (região de Xambioá) e, para o domínio sul (região de Paraíso do Tocantins), revelaram idades meso-neoproterozoicas (1,25-0,85 Ga) e, secundariamente, paleoproterozoicas (1,85-1,70 Ga), sugerindo a existência de áreas fontes distintas para os dois domínios. As idades-modelo Sm-Nd (T_DM) obtidas em metapelitos (ardósias, filitos, micaxistos) dos grupos Estrondo e Tocantins apresentaram distribuição bimodal com maior frequência de idades entre 2,1 e 1,4 Ga, com moda entre 1,7 e 1,6 Ga, e outras menos frequentes entre 2,7 e 2,4 Ga, sugerindo mistura de fontes de idade Paleoproterozoica (ou até Arqueana) com fontes mais jovens, provavelmente do Meso-Neoproterozoico. Os principais candidatos a fonte para as rochas do Cinturão Araguaia seriam os segmentos crustais situados a sudeste (Cráton São Francisco, Maciço de Goiás e Arco Magmático de Goiás). Toda a sucessão de rochas sedimentares da bacia oceânica Araguaia e rochas magmáticas associadas a estes segmentos foram transportados, posteriormente, em direção à margem oriental do Cráton Amazônico, durante a tectônica principal de estruturação do Cinturão Araguaia, resultante da amalgamação do supercontinente Gondwana.

Perdas de nutrientes e sedimento por erosão e seus efeitos na qualidade da água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV