Development and improvement of protection-system algorithms for ground-fault detection and location in synchronous machines

Uno de los defectos más frecuentes en los generadores síncronos son los defectos a tierra tanto en el devanado estatórico, como de excitación. Se produce un defecto cuando el aislamiento eléctrico entre las partes activas de cualquiera de estos devanados y tierra se reduce considerablemente o desaparece. La detección de los defectos a tierra en ambos devanados es un tema ampliamente estudiado a nivel industrial. Tras la detección y confirmación de la existencia del defecto, dicha falta debe ser localizada a lo largo del devanado para su reparación, para lo que habitualmente el rotor debe ser extraído del estator. Esta operación resulta especialmente compleja y cara. Además, el hecho de limitar la corriente de defecto en ambos devanados provoca que el defecto no sea localizable visualmente, pues apenas existe daño en el generador. Por ello, se deben aplicar técnicas muy laboriosas para localizar exactamente el defecto y poder así reparar el devanado. De cara a reducir el tiempo de reparación, y con ello el tiempo en que el generador esta fuera de servicio, cualquier información por parte del relé de protección acerca de la localización del defecto resultaría de gran utilidad. El principal objetivo de esta tesis doctoral ha sido el desarrollo de nuevos algoritmos que permitan la estimación de la localización de los defectos a tierra tanto en el devanado rotórico como estatórico de máquinas síncronas. Respecto al devanado de excitación, se ha presentado un nuevo método de localización de defectos a tierra para generadores con excitación estática. Este método permite incluso distinguir si el defecto se ha producido en el devanado de excitación, o en cualquiera de los componentes del sistema de excitación, esto es, transformador de excitación, conductores de alimentación del rectificador controlado, etc. En caso de defecto a tierra en del devanado rotórico, este método proporciona una estimación de su localización. Sin embargo, para poder obtener la localización del defecto, se precisa conocer el valor de resistencia de defecto. Por ello, en este trabajo se presenta además un nuevo método para la estimación de este parámetro de forma precisa. Finalmente, se presenta un nuevo método de detección de defectos a tierra, basado en el criterio direccional, que complementa el método de localización, permitiendo tener en cuenta la influencia de las capacidades a tierra del sistema. Estas capacidades resultan determinantes a la hora de localizar el defecto de forma adecuada. En relación con el devanado estatórico, en esta tesis doctoral se presenta un nuevo algoritmo de localización de defectos a tierra para generadores que dispongan de la protección de faltas a tierra basada en la inyección de baja frecuencia. Se ha propuesto un método general, que tiene en cuenta todos los parámetros del sistema, así como una versión simplificada del método para generadores con capacidades a tierra muy reducida, que podría resultar de fácil implementación en relés de protección comercial. Los algoritmos y métodos presentados se han validado mediante ensayos experimentales en un generador de laboratorio de 5 kVA, así como en un generador comercial de 106 MVA con resultados satisfactorios y prometedores. ABSTRACT One of the most common faults in synchronous generators is the ground fault in both the stator winding and the excitation winding. In case of fault, the insulation level between the active part of any of these windings and ground lowers considerably, or even disappears. The detection of ground faults in both windings is a very researched topic. The fault current is typically limited intentionally to a reduced level. This allows to detect easily the ground faults, and therefore to avoid damage in the generator. After the detection and confirmation of the existence of a ground fault, it should be located along the winding in order to repair of the machine. Then, the rotor has to be extracted, which is a very complex and expensive operation. Moreover, the fact of limiting the fault current makes that the insulation failure is not visually detectable, because there is no visible damage in the generator. Therefore, some laborious techniques have to apply to locate accurately the fault. In order to reduce the repair time, and therefore the time that the generator is out of service, any information about the approximate location of the fault would be very useful. The main objective of this doctoral thesis has been the development of new algorithms and methods to estimate the location of ground faults in the stator and in the rotor winding of synchronous generators. Regarding the excitation winding, a new location method of ground faults in excitation winding of synchronous machines with static excitation has been presented. This method allows even to detect if the fault is at the excitation winding, or in any other component of the excitation system: controlled rectifier, excitation transformer, etc. In case of ground fault in the rotor winding, this method provides an estimation of the fault location. However, in order to calculate the location, the value of fault resistance is necessary. Therefore, a new fault-resistance estimation algorithm is presented in this text. Finally, a new fault detection algorithm based on directional criterion is described to complement the fault location method. This algorithm takes into account the influence of the capacitance-to-ground of the system, which has a remarkable impact in the accuracy of the fault location. Regarding the stator winding, a new fault-location algorithm has been presented for stator winding of synchronous generators. This algorithm is applicable to generators with ground-fault protection based in low-frequency injection. A general algorithm, which takes every parameter of the system into account, has been presented. Moreover, a simplified version of the algorithm has been proposed for generators with especially low value of capacitance to ground. This simplified algorithm might be easily implementable in protective relays. The proposed methods and algorithms have been tested in a 5 kVA laboratory generator, as well as in a 106 MVA synchronous generator with satisfactory and promising results.

Sistemas de gestión de puentes : optimización de estrategias de mantenimiento : implementación en redes locales de carreteras

En la actualidad, y en consonancia con la tendencia de “sostenibilidad” extendida a todos los campos y parcelas de la ciencia, nos encontramos con un área de estudio basado en la problemática del inevitable deterioro de las estructuras existentes, y la gestión de las acciones a realizar para mantener las condiciones de servicio de los puentes y prolongar su vida útil. Tal y como se comienza a ver en las inversiones en los países avanzados, con una larga tradición en el desarrollo de sus infraestructuras, se muestra claramente el nuevo marco al que nos dirigimos. Las nuevas tendencias van encaminadas cada vez más a la conservación y mantenimiento, reduciéndose las partidas presupuestarias destinadas a nuevas actuaciones, debido a la completa vertebración territorial que se ha ido instaurando en estos países, entre los que España se encuentra. Este nutrido patrimonio de infraestructuras viarias, que cuentan a su vez con un importante número de estructuras, hacen necesarias las labores de gestión y mantenimiento de los puentes integrantes en las mismas. Bajo estas premisas, la tesis aborda el estado de desarrollo de la implementación de los sistemas de gestión de puentes, las tendencias actuales e identificación de campos por desarrollar, así como la aplicación específica a redes de carreteras de escasos recursos, más allá de la Red Estatal. Además de analizar las diversas metodologías de formación de inventarios, realización de inspecciones y evaluación del estado de puentes, se ha enfocado, como principal objetivo, el desarrollo de un sistema específico de predicción del deterioro y ayuda a la toma de decisiones. Este sistema, adicionalmente a la configuración tradicional de criterios de formación de bases de datos de estructuras e inspecciones, plantea, de forma justificada, la clasificación relativa al conjunto de la red gestionada, según su estado de condición. Eso permite, mediante técnicas de optimización, la correcta toma de decisiones a los técnicos encargados de la gestión de la red. Dentro de los diversos métodos de evaluación de la predicción de evolución del deterioro de cada puente, se plantea la utilización de un método bilineal simplificado envolvente del ajuste empírico realizado y de los modelos markovianos como la solución más efectiva para abordar el análisis de la predicción de la propagación del daño. Todo ello explotando la campaña experimenta realizada que, a partir de una serie de “fotografías técnicas” del estado de la red de puentes gestionados obtenidas mediante las inspecciones realizadas, es capaz de mejorar el proceso habitual de toma de decisiones. Toda la base teórica reflejada en el documento, se ve complementada mediante la implementación de un Sistema de Gestión de Puentes (SGP) específico, adaptado según las necesidades y limitaciones de la administración a la que se ha aplicado, en concreto, la Dirección General de Carreteras de la Junta de Comunidades de Castilla-La Mancha, para una muestra representativa del conjunto de puentes de la red de la provincia de Albacete, partiendo de una situación en la que no existe, actualmente, un sistema formal de gestión de puentes. Tras un meditado análisis del estado del arte dentro de los Capítulos 2 y 3, se plantea un modelo de predicción del deterioro dentro del Capítulo 4 “Modelo de Predicción del Deterioro”. De la misma manera, para la resolución del problema de optimización, se justifica la utilización de un novedoso sistema de optimización secuencial elegido dentro del Capítulo 5, los “Algoritmos Evolutivos”, en sus diferentes variantes, como la herramienta matemática más correcta para distribuir adecuadamente los recursos económicos dedicados a mantenimiento y conservación de los que esta administración pueda disponer en sus partidas de presupuesto a medio plazo. En el Capítulo 6, y en diversos Anexos al presente documento, se muestran los datos y resultados obtenidos de la aplicación específica desarrollada para la red local analizada, utilizando el modelo de deterioro y optimización secuencial, que garantiza la correcta asignación de los escasos recursos de los que disponen las redes autonómicas en España. Se plantea con especial interés la implantación de estos sistemas en la red secundaria española, debido a que reciben en los últimos tiempos una mayor responsabilidad de gestión, con recursos cada vez más limitados. Finalmente, en el Capítulo 7, se plantean una serie de conclusiones que nos hacen reflexionar de la necesidad de comenzar a pasar, en materia de gestión de infraestructuras, de los estudios teóricos y los congresos, hacia la aplicación y la práctica, con un planteamiento que nos debe llevar a cambios importantes en la forma de concebir la labor del ingeniero y las enseñanzas que se imparten en las escuelas. También se enumeran las aportaciones originales que plantea el documento frente al actual estado del arte. Se plantean, de la misma manera, las líneas de investigación en materia de Sistemas de Gestión de Puentes que pueden ayudar a refinar y mejorar los actuales sistemas utilizados. In line with the development of "sustainability" extended to all fields of science, we are faced with the inevitable and ongoing deterioration of existing structures, leading nowadays to the necessary management of maintaining the service conditions and life time extension of bridges. As per the increased amounts of money that can be observed being spent in the countries with an extensive and strong tradition in the development of their infrastructure, the trend can be clearly recognized. The new tendencies turn more and more towards conservation and maintenance, reducing programmed expenses for new construction activities, in line with the already wellestablished territorial structures, as is the case for Spain. This significant heritage of established road infrastructure, consequently containing a vast number of structures, imminently lead to necessary management and maintenance of the including bridges. Under these conditions, this thesis focusses on the status of the development of the management implementation for bridges, current trends, and identifying areas for further development. This also includes the specific application to road networks with limited resources, beyond the national highways. In addition to analyzing the various training methodologies, inventory inspections and condition assessments of bridges, the main objective has been the development of a specific methodology. This methodology, in addition to the traditional system of structure and inspection database training criteria, sustains the classification for the entire road network, according to their condition. This allows, through optimization techniques, for the correct decision making by the technical managers of the network. Among the various methods for assessing the evolution forecast of deterioration of each bridge, a simplified bilinear envelope adjustment made empirical method and Markov models as the most effective solution to address the analysis of predicting the spread of damage, arising from a "technical snapshot" obtained through inspections of the condition of the bridges included in the investigated network. All theoretical basis reflected in the document, is completed by implementing a specific Bridges Management System (BMS), adapted according to the needs and limitations of the authorities for which it has been applied, being in this case particularly the General Highways Directorate of the autonomous region of Castilla-La Mancha, for a representative sample of all bridges in the network in the province of Albacete, starting from a situation where there is currently no formal bridge management system. After an analysis of the state of the art in Chapters 2 and 3, a new deterioration prediction model is developed in Chapter 4, "Deterioration Prediction Model". In the same way, to solve the optimization problem is proposed the use of a singular system of sequential optimization elected under Chapter 5, the "Evolutionary Algorithms", the most suitable mathematical tool to adequately distribute the economic resources for maintenance and conservation for mid-term budget planning. In Chapter 6, and in the various appendices, data and results are presented of the developed application for the analyzed local network, from the optimization model, which guarantees the correct allocation of scarce resources at the disposal of authorities responsible for the regional networks in Spain. The implementation of these systems is witnessed with particular interest for the Spanish secondary network, because of the increasing management responsibility, with decreasing resources. Chapter 7 presents a series of conclusions that triggers to reconsider shifting from theoretical studies and conferences towards a practical implementation, considering how to properly conceive the engineering input and the related education. The original contributions of the document are also listed. In the same way, the research on the Bridges Management System can help evaluating and improving the used systematics.

CD8 T cell ignorance or tolerance to islet antigens depends on antigen dose

There are two major mechanisms reported to prevent the autoreactivity of islet-specific CD8+ T cells: ignorance and tolerance. When ignorance is operative, naïve autoreactive CD8+ T cells ignore islet antigens and recirculate without causing damage, unless activated by an external stimulus. In the case of tolerance, CD8+ T cells are deleted. Which factor(s) contributes to each particular outcome was previously unknown. Here, we demonstrate that the concentration of self antigen determines which mechanism operates. When ovalbumin (OVA) was expressed at a relatively low concentration in the pancreatic islets of transgenic mice, there was no detectable cross-presentation, and the CD8+ T cell compartment remained ignorant of OVA. In mice expressing higher doses of OVA, cross-presentation was detectable and led to peripheral deletion of OVA-specific CD8+ T cells. When cross-presentation was prevented by reconstituting the bone marrow compartment with cells incapable of presenting OVA, deletional tolerance was converted to ignorance. Thus, the immune system uses two strategies to avoid CD8+ T cell-mediated autoimmunity: for high dose antigens, it deletes autoreactive T cells, whereas for lower dose antigens, it relies on ignorance.

Oxidative Damage in Pea Plants Exposed to Water Deficit or Paraquat1

The application of a moderate water deficit (water potential of −1.3 MPa) to pea (Pisum sativum L. cv Lincoln) leaves led to a 75% inhibition of photosynthesis and to increases in zeaxanthin, malondialdehyde, oxidized proteins, and mitochondrial, cytosolic, and chloroplastic superoxide dismutase activities. Severe water deficit (−1.9 MPa) almost completely inhibited photosynthesis, decreased chlorophylls, β-carotene, neoxanthin, and lutein, and caused further conversion of violaxanthin to zeaxanthin, suggesting damage to the photosynthetic apparatus. There were consistent decreases in antioxidants and pyridine nucleotides, and accumulation of catalytic Fe, malondialdehyde, and oxidized proteins. Paraquat (PQ) treatment led to similar major decreases in photosynthesis, water content, proteins, and most antioxidants, and induced the accumulation of zeaxanthin and damaged proteins. PQ decreased markedly ascorbate, NADPH, ascorbate peroxidase, and chloroplastic Fe-superoxide dismutase activity, and caused major increases in oxidized glutathione, NAD+, NADH, and catalytic Fe. It is concluded that, in cv Lincoln, the increase in catalytic Fe and the lowering of antioxidant protection may be involved in the oxidative damage caused by severe water deficit and PQ, but not necessarily in the incipient stress induced by moderate water deficit. Results also indicate that the tolerance to water deficit in terms of oxidative damage largely depends on the legume cultivar.

Genetic algorithms in statistical tolerancing

An important aspect in manufacturing design is the distribution of geometrical tolerances so that an assembly functions with given probability, while minimising the manufacturing cost. This requires a complex search over a multidimensional domain, much of which leads to infeasible solutions and which can have many local minima. As well, Monte-Carlo methods are often required to determine the probability that the assembly functions as designed. This paper describes a genetic algorithm for carrying out this search and successfully applies it to two specific mechanical designs, enabling comparisons of a new statistical tolerancing design method with existing methods. (C) 2003 Elsevier Ltd. All rights reserved.

Functional expression and characterization of Eehinococcus granulosus thioredoxin peroxidase suggests a role in protection against oxidative damage

A full-length cDNA sequence coding for Echinococcus granulosus thioredoxin peroxidase (EgTPx) was isolated from a sheep strain protoscolex cDNA library by immunoscreening using a pool of sera from mice infected with oncospheres. EgTPx expressed as a fusion protein with glutathione S-transferase (GST) exhibited significant thiol-dependent peroxidase activity that protected plasmid DNA from damage by metal-catalyzed oxidation (MCO) in vitro. Furthermore, the suggested antioxidant role for EgTPx was reinforced in an in vivo assay, whereby its expression in BL21 bacterial cells markedly increased the tolerance and survival of the cells to high concentrations of H2O2 compared with controls. Immunolocalization studies revealed that EgTPx was specifically expressed in all tissues of the protoscolex and brood capsules. Higher intensity of labelling was detected in many, but not all, calcareous corpuscle cells in protoscoleces. The purified recombinant EgTPx protein was used to screen sera from heavily infected mice and patients with confirmed hydatid infection. Only a portion of the sera reacted positively with the EgTPx-GST fusion protein in Western blots, suggesting that EgTPx may form antibody-antigen complexes or that responses to the EgTPx antigen may be immunologically regulated. Recombinant EgTPx may prove useful for the screening of specific inhibitors that could serve as new drugs for treatment of hydatid disease. Moreover, given that TPx from different parasitic phyla were phylogenetically distant from host TPx molecules, the development of antiparasite TPx inhibitors that do not react with host TPx might be feasible. (C) 2003 Elsevier B.V. All rights reserved.

Boron nutrition and chilling tolerance of warm climate crop species

Background Field observations and glasshouse studies have suggested links between boron (B)-deficiency and leaf damage induced by low temperature in crop plants, but causal relationships between these two stresses at physiological, biochemical and molecular levels have yet to be explored. Limited evidence at the whole-plant level suggests that chilling temperature in the root zone restricts B uptake capacity and/or B distribution/utilization efficiency in the shoot, but the nature of this interaction depends on chilling tolerance of species concerned, the mode of low temperature treatment (abrupt versus gradual temperature decline) and growth conditions (e.g. photon flux density and relative humidity) that may exacerbate chilling stress. Scope This review explores roles of B nutrition in chilling tolerance of continual root or transient shoot chills in crop species adapted to warm season conditions. It reviews current research on combined effects of chilling temperature (ranging from > 0 to 20 degrees C) and B deficiency on growth and B nutrition responses in crop species differing in chilling tolerance. Conclusion For subtropical/tropical species (e.g. cucumber, cassava, sunflower), root chilling at 10-17 degrees C decreases B uptake efficiency and B utilization in the shoot and increases the shoot : root ratio, but chilling-tolerant temperate species (e.g. oilseed rape, wheat) require much lower root chill temperatures (2-5 degrees C) to achieve the same responses. Boron deficiency exacerbates chilling injuries in leaf tissues, particularly under high photon flux density. Suggested mechanisms for B x chilling interactions in plants are: (a) chilling-induced reduction in plasmalemma hydraulic conductivity, membrane fluidity, water channel activity and root pressure, which contribute to the decrease in root hydraulic conductance, water uptake and associated B uptake; (b) chilling-induced stomatal dysfunction affecting B transport from root to shoot and B partitioning in the shoot; and (c) B deficiency induced sensitivity to photo-oxidative damage in leaf cells. However, specific evidence for each of the mechanisms is still lacking. Impacts of B status on chilling tolerance in crop species have important implications for the management of B supply during sensitive stages of growth, such as early growth after planting and early reproductive development, both of which can coincide with the occurrence of chilling temperatures in the field.

Tolerance of endolithic algae to elevated temperature and light in the coral Montipora monasteriata from the southern Great Barrier Reef

Photosynthetic endolithic algae and cyanobacteria live within the skeletons of many scleractinians. Under normal conditions, less than 5% of the photosynthetically active radiation (PAR) reaches the green endolithic algae because of the absorbance of light by the endosymbiotic dinoflagellates and the carbonate skeleton. When corals bleach (loose dinoflagellate symbionts), however, the tissue of the corals become highly transparent and photosynthetic microendoliths may be exposed to high levels of both thermal and solar stress. This study explores the consequence of these combined stresses on the phototrophic endoliths inhabiting the skeleton of Montipora monasteriata, growing at Heron Island, on the southern Great Barrier Reef. Endoliths that were exposed to sun after tissue removal were by far more susceptible to thermal photoinhibition and photo-damage than endoliths under coral tissue that contained high concentrations of brown dinoflagellate symbionts. While temperature or light alone did not result in decreased photosynthetic efficiency of the endoliths, combined thermal and solar stress caused a major decrease and delayed recovery. Endoliths protected under intact tissue recovered rapidly and photoacclimated soon after exposure to elevated sea temperatures. Endoliths under naturally occurring bleached tissue of M. monasteriata colonies (bleaching event in March 2004 at Heron Island) acclimated to increased irradiance as the brown symbionts disappeared. We suggest that two major factors determine the outcome of thermal bleaching to the endolith community. The first is the microhabitat and light levels under which a coral grows, and the second is the susceptibility of the coral-dinoflagellates symbiosis to thermal stress. More resistant corals may take longer to bleach allowing endoliths time to acclimate to a new light environment. This in turn may have implications for coral survival.

Genotypic variation for cold tolerance during reproductive development in rice: Screening with cold air and cold water

Rice (Oryza sativa L.) plants are susceptible to low temperature during the young microspore stage, which occurs 10-12 days before heading. Low temperature at this time increases spikelet sterility which can cause massive yield loss. Increasing the cold tolerance of cultivars can reduce yield variability in temperate rice-growing environments. Two experiments were conducted in cold air screenings and two were conducted in cold water screenings to examine genotypic variation for cold tolerance, explore flowering traits related to spikelet sterility, and investigate whether the results reflect the level of cold tolerance determined previously in the field. Cold air screenings imposed day/night temperatures of 27 degrees C/13 degrees C, 25 degrees C/15 degrees C and 32 degrees C/25 degrees C following particle initiation until 50% heading, while cold water screenings maintained a relatively constant 19 degrees C. The variation in the commencement of low air temperature treatment did not have an effect on the level of spikelet sterility, indicating that exposure to low temperature during the young microspore stage was more important than the duration of exposure. Spikelet sterility of common cultivars showed a significant correlation between cold air and cold water screenings (r(2) = 0.63, p < 0.01), cold air and field screenings (r(2) = 0.52, p < 0.01) and cold water and field screenings (r(2) = 0.53, p < 0.01), indicating that cold air and cold water can be used for screening genotypes for low temperature tolerance. HSC55, M 103 and Jyoudeki were identified as cold tolerant and Doongara, Sasanishiki and Nipponbare as susceptible cultivars. There was a significant negative relationship between spikelet sterility and both the number of engorged pollen grains per anther and anther area only after imposing cold air and cold water treatment hence, it was concluded that these flowering traits were facultative in nature. In addition, cultivars originating from Australia and California were inefficient at producing filled grain with similar sized anthers containing a similar number of engorged pollen grains as cultivars from other origins. One suggested reason for this poor conversion to filled grain of cultivars from Australia and California may be associated with their small stigma area, particularly when exposed to low temperature conditions. (c) 2006 Elsevier B.V. All rights reserved.

Minimising cold damage during reproductive development among temperate rice genotypes. I. Avoiding low temperature with the use of appropriate sowing time and photoperiod-sensitive varieties

Multiple-sown field trials in 4 consecutive years in the Riverina region of south-eastern Australia provided 24 different combinations of temperature and day length, which enabled the development of crop phenology models. A crop model was developed for 7 cultivars from diverse origins to identify if photoperiod sensitivity is involved in determining phenological development, and if that is advantageous in avoiding low-temperature damage. Cultivars that were mildly photoperiod-sensitive were identified from sowing to flowering and from panicle initiation to flowering. The crop models were run for 47 years of temperature data to quantify the risk of encountering low temperature during the critical young microspore stage for 5 different sowing dates. Cultivars that were mildly photoperiod-sensitive, such as Amaroo, had a reduced likelihood of encountering low temperature for a wider range of sowing dates compared with photoperiod-insensitive cultivars. The benefits of increased photoperiod sensitivity include greater sowing flexibility and reduced water use as growth duration is shortened when sowing is delayed. Determining the optimal sowing date also requires other considerations, e. g. the risk of cold damage at other sensitive stages such as flowering and the response of yield to a delay in flowering under non-limiting conditions. It was concluded that appropriate sowing time and the use of photoperiod-sensitive cultivars can be advantageous in the Riverina region in avoiding low temperature damage during reproductive development.

Ultrastructure, osmotic tolerance, glycerol toxicity and cryopreservation of caput and cauda epididymidal kangaroo spermatozoa

The aim of the present study was to compare cryopreservation, osmotic tolerance and glycerol toxicity between mature and immature epididymal kangaroo spermatozoa to investigate whether the lack of cryopreservation success of cauda epididymidal spermatozoa may be related to the increased complexity of the sperm ultrastructure acquired during epididymal transit. Caput and cauda epididymidal spermatozoa were recovered from red-necked wallabies (RNW; Macropus rufogriseus) and eastern grey kangaroos (EGK; M. giganteus). In Experiment 1, caput and cauda epididymidal spermatozoa were frozen and thawed using a standard cryopreservation procedure in Triscitrate buffer with or without 20% glycerol. Although cryopreservation of caput epididymidal spermatozoa resulted in a significant increase in sperm plasma membrane damage, they were more tolerant of the procedure than spermatozoa recovered from the cauda epididymidis (P< 0.05). In Experiment 2, caput and cauda epididymidal EGK spermatozoa were diluted into phosphate-buffered saline media of varying osmolarity and their osmotic tolerance determined. Plasma membranes of caput epididymidal spermatozoa were more tolerant of hypo-osmotic media than were cauda epididymidal spermatozoa ( P< 0.05). In Experiment 3, caput and cauda epididymidal RNW spermatozoa were incubated in Tris-citrate buffer with and without 20% glycerol at 35 and 4 degrees C to examine the cytotoxic effects of glycerol. At both temperatures, caput epididymidal spermatozoa showed less plasma membrane damage compared with cauda epididymidal spermatozoa when exposed to 20% glycerol ( P< 0.05). These experiments clearly indicate that epididymal maturation of kangaroo spermatozoa results in a decreased ability to withstand the physiological stresses associated with cryopreservation.

Expression of genotypic responses to frost tolerance in wheat

Yield losses due to frost in Australian wheat crop can be high and are often associated with head-frosting. Two field experiments were conducted over two seasons to investigate the genetic variation in frost tolerance in 150 double haploid lines (DHLs) derived from a cross between Kite and Bindawarra. Glycinebetaine content in the leaf blade during frost acclimation/hardening, cell membrane damage (electrolyte leakage) after frost and grain yield were measured. Significant variation in cell membrane damage was noted (16% to 85%) which was negatively correlated with grain yield (r = - 0.43; p

Australia: new screening method for cold tolerance during the reproducitve stage in rice

Low temperature, particularly during the reproductive stage of the development of rice, limits productivity in the Riverina region of New South Wales (NSW). This study primarily examined genotypic differences in cold damage that are associated with low temperature during reproductive development. Results from experiments in temperature-controlled rooms and the cold water facility were combined with four years of field experiments, which used natural exposure to low temperature to examine the response of over 50 cultivars from diverse origins. Plants were exposed to day/night air temperatures of 27°/13°C in temperature-controlled rooms and to a constant temperature of 19°C in the cold water facility. Low temperature treatments were imposed from panicle initiation (PI) to 50% heading. In field experiments several techniques were used to increase the likelihood of inducing cold damage such as sequential sowing dates (five to eight sowing dates each year), shallow water depths (5cm) and high nitrogen rates (e.g. 300kgN ha-1). Several cultivars were identified that were more cold tolerant than Australia’s commercial cultivars.

Size dependent enhancement of helium ion irradiation tolerance in sputtered Cu/V nanolaminates

We have investigated the evolution of radiation damage and changes in hardness of sputter-deposited Cu/V nanolaminates upon room temperature helium ion irradiation. As the individual layer thickness decreases from 200 to 5 nm, helium bubble density and radiation hardening both decrease. The magnitude of radiation hardening becomes negligible for individual layer thickness of 2.5 nm or less. These observations indicate that nearly immiscible Cu/V interface can effectively absorb radiation-induced point defects and reduce their concentrations.

CamSim:a distributed smart camera network simulator

Smart cameras allow pre-processing of video data on the camera instead of sending it to a remote server for further analysis. Having a network of smart cameras allows various vision tasks to be processed in a distributed fashion. While cameras may have different tasks, we concentrate on distributed tracking in smart camera networks. This application introduces various highly interesting problems. Firstly, how can conflicting goals be satisfied such as cameras in the network try to track objects while also trying to keep communication overhead low? Secondly, how can cameras in the network self adapt in response to the behavior of objects and changes in scenarios, to ensure continued efficient performance? Thirdly, how can cameras organise themselves to improve the overall network's performance and efficiency? This paper presents a simulation environment, called CamSim, allowing distributed self-adaptation and self-organisation algorithms to be tested, without setting up a physical smart camera network. The simulation tool is written in Java and hence allows high portability between different operating systems. Relaxing various problems of computer vision and network communication enables a focus on implementing and testing new self-adaptation and self-organisation algorithms for cameras to use.