La estabilidad estructural del suelo y turbidez del agua en sistemas agroforestales bajo diferentes niveles de insumo en el cultivo de café (coffea arabica L.), Masatepe, Nicaragua 2015

La estabilidad estructural de suelo y la calidad del agua son factores importantes relacionados a la conservación del suelo y agua en cualquier ecosistema; para tal caso se seleccionaron diferentes sistemas agroforestales en el cultivo de café. (Coffea arabicaL) C.V. PACAS, la plantación de café bajo sombra como Inga laurina + Simarouba glauca (ILSG), Simaruba glauca + Tabebuia rosea (SGTR), Samanea saman + Inga laurina (SSIL), Samanea saman + Tabebuia rosea (SSTR) y a pleno sol y niveles de insumos; Convencional Moderado (MO) Convencional Intensivo (CI), Orgánico Moderado (OI) Orgánico Intensivo (OI), son los tratamientos a evaluar en las tres repeticiones para la extracción de los datos de esta variable se utilizó el método del tamiz húmedo (modelo wetsieving apparatus) las muestras fueron sometidas a dos tiempos de exposición 3 y 5 minutos. El ensayo se realizó en la época seca del 2015 en el Centro Nacional de Estudios de Cooperativismo (CENECOOP) ubicado en Masatepe, Nicaragua. Se realizó un ANDEVA, bajo arreglo bifactorial en parcelas divididas mostro diferencias significativas en estabilidad estructural de suelo a los 5 minutos de exposición y para calidad del agua se empleó el método simple. Los resultado muestran una relación entre materia orgánica vs estabilidad estructural con r =99.45,materia orgánica vs turbidez con r =96.66, la textura vs materia orgánica r= 95.51, Es importante resaltar que el efecto de la materia orgánica tiene un efecto importante en la conservación, mejoramiento de la estabilidad estructural y la calidad del agua en sistemas agroforestales debidamente manejado para la protección del suelo en condiciones de laderas.

Semi-automatic generation of learning domain modules for technology supported learning systems

In a time when Technology Supported Learning Systems are being widely used, there is a lack of tools that allows their development in an automatic or semi-automatic way. Technology Supported Learning Systems require an appropriate Domain Module, ie. the pedagogical representation of the domain to be mastered, in order to be effective. However, content authoring is a time and effort consuming task, therefore, efforts in automatising the Domain Module acquisition are necessary.Traditionally, textbooks have been used as the main mechanism to maintain and transmit the knowledge of a certain subject or domain. Textbooks have been authored by domain experts who have organised the contents in a means that facilitate understanding and learning, considering pedagogical issues.Given that textbooks are appropriate sources of information, they can be used to facilitate the development of the Domain Module allowing the identification of the topics to be mastered and the pedagogical relationships among them, as well as the extraction of Learning Objects, ie. meaningful fragments of the textbook with educational purpose.Consequently, in this work DOM-Sortze, a framework for the semi-automatic construction of Domain Modules from electronic textbooks, has been developed. DOM-Sortze uses NLP techniques, heuristic reasoning and ontologies to fulfill its work. DOM-Sortze has been designed and developed with the aim of automatising the development of the Domain Module, regardless of the subject, promoting the knowledge reuse and facilitating the collaboration of the users during the process.

M/V JACQUELYN L Coral Reef Restoration Monitoring Report, Monitoring Events 2004-2005. Florida Keys National Marine Sanctuary Monroe County, Florida

This document presents the results of the monitoring of a repaired coral reef injured by the M/V Jacquelyn L vessel grounding incident of July 7, 1991. This grounding occurred in Florida state waters within the boundaries of the Florida Keys National Marine Sanctuary (FKNMS). The National Oceanic and Atmospheric Administration (NOAA) and the Board of Trustees of the Internal Improvement Trust Fund of the State of Florida, (“State of Florida” or “state”) are the co-trustees for the natural resources within the FKNMS and, thus, are responsible for mediating the restoration of the damaged marine resources and monitoring the outcome of the restoration actions. The restoration monitoring program tracks patterns of biological recovery, determines the success of restoration measures, and assesses the resiliency to environmental and anthropogenic disturbances of the site over time. The monitoring program at the Jacquelyn L site was to have included an assessment of the structural stability of installed restoration modules and biological condition of reattached corals performed on the following schedule: immediately (i.e., baseline), 1, 3, and 6 years after restoration and following a catastrophic event. Restoration of this site was completed on July 20, 2000. Due to unavoidable delays in the settlement of the case, the “baseline” monitoring event for this site occurred in July 2004. The catastrophic monitoring event occurred on August 31, 2004, some 2 ½ weeks after the passage of Hurricane Charley which passed nearby, almost directly over the Dry Tortugas. In September 2005, the year one monitoring event occurred shortly after the passage of Hurricane Katrina, some 70 km to the NW. This report presents the results of all three monitoring events. (PDF contains 31 pages.)

Aspects of the washout of salmonid eggs. 2. Effects of drifting on development and survival of eggs of brown trout (Salmo trutta L.)

At high stream discharges salmonid eggs can he displaced from the gravel and may drift downstream. It has been suggested that developing salmonid eggs may be killed by ”physical shock”, especially during the period before ”eyeing”. Similarly, a progress report by the International Pacific Salmon Fisheries Commission (1966) states that salmonid eggs are most sensitive during the period between fertilisation and blastopore closure. However, it would seem unlikely that this sensitivity actually begins at the time of fertilisation because, in nature, a period, perhaps measured in hours, must occur during which the newly-fertilised eggs are exposed to physical shock during the deposition of gravel over them as a result of the cutting activity of the female fish. The present report describes simple channel experiments designed to answer the two questions: 1. After release of eggs from the gravel, does the process of drifting downstream, which implies some physical shock through movement and impact, decrease the survival of salmonid eggs? 2. Is the survival rate-influenced by the stage of development of the eggs?

A simple technique of controlled breeding of carps in semi-arid environment

A semi-arid environment is a major constraint for production of carp seed through hypophysation. At a water temperature above 31 degree C fishes often fail to respond to induced breeding or produce partial or full eggs with fairly less fertilization, leading to their mortality during embryonic development. Field trials with Labee rohita and Cyprinus carpio communis prove that hypophysation followed by stripping and hatching in a water medium with reduced temperature (below 31 degree C) through controlled use of ice-water and water showers can result in 50-60% fertilization of eggs and 50-72% hatching for L. rohita, and 40-90% fertilization and 49-77% hatching for C. carpio communis. Simultaneous breeding experiments of the species in normal water temperature (>31 degree C) showed negative results.

Characterization of Sarcocystis species in domestic animals using a PCR-RFLP analysis of variation in the 18S rRNA gene: a cost-effective and simple technique for routine species identification

Thirteen restriction endonucleases were used to investigate nucleotide sequence variation in the 18S rRNA DNA of 88 individuals from ten Sarcocystis taxa collected as cysts from their intermediate hosts, swine, cattle and water buffalo. A DNA sequence of

Comment on "Acoustic chaos in a duct with two separate sound sources" [J. Acoust. Soc. Am. 110, 120-126 (2001)] (L)

In a paper published in this journal in 2001 by Dong [W. G. Dong, X. Y. Huang, and Q. L. Wo, J. Acoust. Soc. Am. 110, 120-126 (2001)] it was claimed that acoustic chaos was obtained experimentally by the nonlinear interaction of two acoustic waves in a duct. In this comment a simple experimental setup and an analytical model is used to show that the dynamics of such systems corresponds to a quasiperiodic motion, and not to a chaotic one. © 2008 Acoustical Society of America.

Enhanced robotic body extension with modular units

The adaptation of robots to changing tasks has been explored in modular self-reconfigurable robot research, where the robot structure is altered by adapting the connectivity of its constituent modules. As these modules are generally complex and large, an upper bound is imposed on the resolution of the built structures. Inspired by growth of plants or animals, robotic body extension (RBE) based on hot melt adhesives allows a robot to additively fabricate and assemble tools, and integrate them into its own body. This enables the robot to achieve tasks which it could not achieve otherwise. The RBE tools are constructed from hot melt adhesives and therefore generally small and only passive. In this paper, we seek to show physical extension of a robotic system in the order of magnitude of the robot, with actuation of integrated body parts, while maintaining the ability of RBE to construct parts with high resolution. Therefore, we present an enhancement of RBE based on hot melt adhesives with modular units, combining the flexibility of RBE with the advantages of simple modular units. We explain the concept of this new approach and demonstrate with two simple unit types, one fully passive and the other containing a single motor, how the physical range of a robot arm can be extended and additional actuation can be added to the robot body. © 2012 IEEE.

High-frequency characterization of packaging network in to-can photodiode modules

A simple method for analyzing the effects of TO packaging network on the high-frequency response of photodiode modules is presented. This method is established based on the relations of the scattering parameters of the packaging network, photodiode chip, and module. It is shown that the results obtained by this method agree well with those obtained by the conventional comparison method. The proposed method is much more convenient since only the electrical domain measurements are required. (C) 2008 Wiley Periodicals, Inc.

Frequency bandwidth estimation of TO packaging techniques for laser modules

Two simple methods for estimating the potential modulation bandwidth of TO packaging technique are presented. The first method is based upon the comparison of the measured frequency responses of the laser diodes and the TO laser modules, and the second is from the equivalent circuit for the test fixture, the TO header, the submount and the bonding wire. It is shown that the TO packaging techniques used in the experiments can potentially achieve a frequency bandwidth of over 10.5 GHz, and the two proposed methods give similar results.

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.

Potential frequency bandwidth estimation of TO packaging techniques for photodiode modules

Scattering parameters of photodiode chip, TO header and TO packaged module are measured, and the effects of TO packaging network on the high-frequency response of photodiode are investigated. Based on the analysis, the potential bandwidth of TO packaging techniques is estimated from the scattering parameters of the TO packaging network. Another method for estimating the potential bandwidth from the equivalent circuit for the TO packaged photodiode model is also presented. The results obtained using both methods show that the TO packaging techniques used in the experiments can potentially achieve a frequency bandwidth of 22 GHz.