Measures to improve energy efficiency in shipping

This paper provides an overview of several parameters that would improve the fuel efficiency of shipping. Calculations are carried out from a Latin American perspective, and illustrate the emmissions to air and the fuel consumed by different transport modes.

Multimodal transport, shipping and ports: current trends and prospects

This and the next edition of the Bulletin report on recent events and trends in the transport sector in Latin America and the Caribbean.

Concentration in liner shipping

Containerization, telecommunication, globalization and privatization are among the most important recent trends that have affected shipping. Concentration is another trend which is expected to have a major impact. This refers to the increasing control in the hands of a small number of companies who hold an increasing market share. Although at first this process may be associated with dominant positions and abuse of monopoly power, in reality, the advantages for the economies of Latin America and the Caribbean should by far outweigh the disadvantages. This edition of the FAL Bulletin presents some of the findings of a recent study prepared by the ECLAC Transport Unit, entitled, Concentration in liner shipping - its causes and impacts for ports and shipping services in developing regions, LC/G.2027 , August 1998.

Shipping costs: a rising challenge to the region's competitive development

This issue of the FAL Bulletin examines the impact of shipping costs on the exports of five Latin American and Caribbean countries by analysing the difference between the unit value of goods at the port of origin and at the port of destination, in three of the region's main external markets.

The impact of structural changes in liner shipping on Caribbean ports

This edition of the FAL Bulletin deals with maritime transport in the Caribbean and focuses on structural changes in liner shipping and its impact on ports and transhipment in the Caribbean. The article has been written by Dr. Gustaaf de Monie of Policy Research Corporation N.V., Antwerp, Belgium, and is based on the study "Caribbean Ports Scan", which is about to be published by Policy Research Corporation (Fax 32-3-2869496). The opinions expressed in this article are of the author and may not necessarily coincide with the views of ECLAC. The main purpose of this edition is to encourage a constructive and fruitful discussion.

Recent increases in shipping costs and their impact on exports from Latin America

This issue of the FAL Bulletin is based on a study prepared by ECLAC which works out a provisional approach for estimating the impact of increases in freight rates on exports from Latin America during the last few quarters. The total cost of exports from the region reflects the increases in three different components: the quantities exported, the prices of the goods and the freight charges. The influence of each of these is estimated.The information bases used are comprised of data obtained from the World Trade Organization (WTO), the United Nations Conference on Trade and Development (UNCTAD), the Economic Commission for Latin America and the Caribbean (ECLAC) (International Transport Database) and the authors own direct compilation. The conclusion is that total exports from Latin America varied by US$ 5.72 billion in the first half of 2004 compared with the first half of 2003; of this amount, US$ 2,105,000,000 correspond to the variation in price and quantity and US$ 3,615,000,000 represent the increase in export freight rates. When compared with the first half of 2002, the variation is in excess of US$ 8 billion.

Contamination of cachaca by pahs from storage containers

Cachaça is a distiled beverage obtained from the fermentation of sugar cane syrup that, depending on the production procedures, may be susceptible to contamination by polycyclic aromatic hydrocarbons (PAHs). These compounds present carcinogenic and/or mutagenic properties and offer a risk to human health. Sixteen PAHs were determined in cachaças that had been stored in glass bottles and in polyethylene tank by gas chromatography coupled with mass spectrometry. The quantification of the PAHs utilised an internal standard. The limits of detection and quantification varied from 0.05 to 0.10 μg L−1 and 0.20 to 0.30 μg L−1, respectively. A total PAH concentration of 51.57 μg L−1 was found in the beverages that were stored in the tank, while the concentration in the cachaça stored in glass jugs was 6.07 μg L−1. These results indicate that the polyethylene tank is a source for PAHs in cachaça.

Nuevos escenarios del transporte marítimo Parte II: fluctuaciones del shipping y los nuevos escenarios

El presente Boletín Fal está dedicado a detallar la situación de la industria del shipping, y corresponde a la segunda y última parte de un documento más grande que inicia con el Boletín FAL No 338 el cual se contextualiza la situación del comercio marítimo. Ambos documentos se enmarcan en una serie de boletines sobre puertos y comercio marítimo en la región y por tanto, se encuentran estrechamente relacionados con el Boletín FAL No 337 que plantea la necesidad de una nueva gobernanza en los puertos regionales para hacer frente a las nuevas condiciones interpuestas por el mercado marítimo.

New maritime transport scenarios. Part II: fluctuations in shipping and new scenarios

This FAL Bulletin details the situation of the shipping industry and forms the second and final part of a larger document that begins with Issue No. 338, which puts the current status of maritime trade in context. Both documents fit into a series of bulletins about ports and maritime trade in the region and are, therefore, closely linked to Issue No. 337, which sets out the need for a new port governance in the region to address the new circumstances that have arisen in the maritime market.

Ports in short sea shipping: a critical assessment of the European maritime transport policy

Programa de doctorado: Perspectivas Científicas sobre el turismo y la Dirección de Empresas Turísticas

Simulation of Freight Trains Equipped with Partially Filled Tank Containers and Related Resonance Phenomenon

To study the fluid motion-vehicle dynamics interaction, a model of four, liquid filled two-axle container freight wagons was set up. The railway vehicle has been modelled as a multi-body system (MBS). To include fluid sloshing, an equivalent mechanical model has been developed and incorporated. The influence of several factors has been studied in computer simulations, such as track defects, curve negotiation, train velocity, wheel wear, liquid and solid wagonload, and container baffles. SIMPACK has been used for MBS analysis, and ANSYS for liquid sloshing modelling and equivalent mechanical systems validation. Acceleration and braking manoeuvres of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. The coupling gear consists of UIC standard traction hooks and coupling screws that are located between buffers. One of the coupling screws is placed in the traction hook of the opposite wagon thus joining the two wagons, whereas the unused coupling screw rests on a hanger. Simulation results showed that, for certain combinations of type of liquid, filling level and container dimensions, the liquid cargo could provoke an undesirable, although not hazardous, release of the unused coupling screw from its hanger. The coupling screw's release was especially obtained when a period of acceleration was followed by an abrupt braking manoeuvre at 1 m/s2. It was shown that a resonance effect between the liquid's oscillation and the coupling screw's rotary motion could be the reason for the coupling screw's undesired release. Possible solutions to avoid the phenomenon are given.Acceleration and braking manoeuvres of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. The coupling gear consists of UIC standard traction hooks and coupling screws that are located between buffers. One of the coupling screws is placed in the traction hook of the opposite wagon thus joining the two wagons, whereas the unused coupling screw rests on a hanger. This paper reports on a study of the fluid motion-train vehicle dynamics interaction. In the study, a model of four, liquid-filled two-axle container freight wagons was developed. The railway vehicle has been modeled as a multi-body system (MBS). To include fluid sloshing, an equivalent mechanical model has been developed and incorporated. The influence of several factors has been studied in computer simulations, such as track defects, curve negotiation, train velocity, wheel wear, liquid and solid wagonload, and container baffles. A simulation program was used for MBS analysis, and a finite element analysis program was used for liquid sloshing modeling and equivalent mechanical systems validation. Acceleration and braking maneuvers of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. Simulation results showed that, for certain combinations of type of liquid, filling level and container dimensions, the liquid cargo could provoke an undesirable, although not hazardous, release of an unused coupling screw from its hanger. It was shown that a resonance effect between the liquid's oscillation and the coupling screw's rotary motion could be the reason for the coupling screw's undesired release. Solutions are suggested to avoid the resonance problem, and directions for future research are given.

The Phase Space as a New Representation of the Dynamical Behaviour of Temperature and Enthalpy in a Reefer monitored with a Multidistributed Sensors Network

The study of temperature gradients in cold stores and containers is a critical issue in the food industry for the quality assurance of products during transport, as well as forminimizing losses. The objective of this work is to develop a new methodology of data analysis based on phase space graphs of temperature and enthalpy, collected by means of multidistributed, low cost and autonomous wireless sensors and loggers. A transoceanic refrigerated transport of lemons in a reefer container ship from Montevideo (Uruguay) to Cartagena (Spain) was monitored with a network of 39 semi-passive TurboTag RFID loggers and 13 i-button loggers. Transport included intermodal transit from transoceanic to short shipping vessels and a truck trip. Data analysis is carried out using qualitative phase diagrams computed on the basis of Takens?Ruelle reconstruction of attractors. Fruit stress is quantified in terms of the phase diagram area which characterizes the cyclic behaviour of temperature. Areas within the enthalpy phase diagram computed for the short sea shipping transport were 5 times higher than those computed for the long sea shipping, with coefficients of variation above 100% for both periods. This new methodology for data analysis highlights the significant heterogeneity of thermohygrometric conditions at different locations in the container.