Workflow Patterns for Service Oriented Computing in JOLIE

Il presente lavoro di tesi ha come punto focale la descrizione, la verifica e la dimostrazione della realizzabilità dei Workflow Patterns di Gestione del Flusso(Control-Flow) e Risorse (Resource) definiti da parte della Workflow Pattern Initiative (WPI)in JOLIE, un innovativo linguaggio di programmazione orientato ai servizi nato nell'ambito del Service Oriented Computing. Il Service Oriented Computing (SOC) è un nuovo modo di pensare la programmazione di applicazioni distribuite, i cui concetti fondamentali sono i servizi e la composizione. L’approccio SOC definisce la possibilità di costruire un’applicazione in funzione dei servizi che ne realizzano il comportamento tramite una loro composizione, definita secondo un particolare flusso di lavoro. Allo scopo di fornire la necessaria conoscenza per capire la teoria, le meccaniche e i costrutti di JOLIE utilizzati per la realizzazione dei pattern, il seguente lavoro di tesi è stato diviso in quattro parti, corrispondenti ad altrettanti capitoli. Nel primo capitolo viene riportata una descrizione generale del SOC e della Business Process Automation (BPA), che costituisce l’ambiente in cui il SOC è inserito. Per questo viene fatta una disamina della storia informatica sui sistemi distribuiti, fino ad arrivare ai sistemi odierni, presentando in seguito il contesto del BPA e delle innovazioni derivanti dalle sue macro-componenti, di cui il SOC fa parte. Continuando la descrizione dell’approccio Service Oriented, ne vengono presentati i requisiti (pre-condizioni) e si cerca di dare una definizione precisa del termine “servizio”, fino all'enunciazione dei principi SOC declinati nell’ottica delle Service Oriented Architectures, presentando in ultimo i metodi di composizione dei servizi, tramite orchestrazione e coreografia. L’ultima sezione del capitolo prende in considerazione il SOC in un’ottica prettamente industriale e ne evidenzia i punti strategici. Il secondo capitolo è incentrato sulla descrizione di JOLIE, gli aspetti fondamentali dell’approccio orientato ai servizi, che ne caratterizzano profondamente la definizione concettuale (SOCK), e la teoria della composizione dei servizi. Il capitolo non si pone come una descrizione esaustiva di tutte le funzionalità del linguaggio, ma considera soprattutto i concetti teorici, le strutture di dati, gli operatori e i costrutti di JOLIE utilizzati per la dimostrazione della realizzabilità dei Workflow Pattern del capitolo successivo. Il terzo capitolo, più lungo e centrale rispetto agli altri, riguarda la realizzazione dei workflow pattern in JOLIE. All'inizio del capitolo viene fornita una descrizione delle caratteristiche del WPI e dei Workflow Pattern in generale. In seguito, nelle due macro-sezioni relative ai Control-Flow e Resource pattern vengono esposte alcune nozioni riguardanti le metodologie di definizione dei pattern (e.g. la teoria sulla definizione delle Colored Petri Nets) e le convezioni adottate dal WPI, per passare in seguito al vero e proprio lavoro (sperimentale) di tesi riguardo la descrizione dei pattern, l’analisi sulla loro realizzabilità in JOLIE, insieme ad un codice di esempio che esemplifica quanto affermato dall'analisi. Come sommario delle conclusioni raggiunte sui pattern, alla fine di ognuna delle due sezioni definite in precedenza, è presente una scheda di valutazione che, con lo stesso metodo utilizzato e definito dalla WPI, permette di avere una rappresentazione generale della realizzabilità dei pattern in JOLIE. Il quarto capitolo riguarda gli esiti tratti dal lavoro di tesi, riportando un confronto tra le realizzazioni dei pattern in JOLIE e le valutazioni del WPI rispetto agli altri linguaggi da loro considerati e valutati. Sulla base di quanto ottenuto nel terzo capitolo vengono definite le conclusioni del lavoro portato avanti sui pattern e viene delineato un’eventuale scenario riguardante il proseguimento dell’opera concernente la validazione ed il completamento della studio. In ultimo vengono tratte alcune conclusioni sia riguardo JOLIE, nel contesto evolutivo del linguaggio e soprattutto del progetto open-source che è alla sua base, sia sul SOC, considerato nell’ambito del BPA e del suo attuale ambito di sviluppo dinamico.

Integration of a simulation platform for electrical mobility within the arrowhead interoperability framework

This dissertation document deals with the development of a project, over a span of more than two years, carried out within the scope of the Arrowhead Framework and which bears my personal contribution in several sections. The final part of the project took place during a visiting period at the university of Luleå. The Arrowhead Project is an European project, belonging to the ARTEMIS association, which aims to foster new technologies and unify the access to them into an unique framework. Such technologies include the Internet of Things phe- nomenon, Smart Houses, Electrical Mobility and renewable energy production. An application is considered compliant with such framework when it respects the Service Oriented Architecture paradigm and it is able to interact with a set of defined components called Arrowhead Core Services. My personal contribution to this project is given by the development of several user-friendly API, published in the project's main repository, and the integration of a legacy system within the Arrowhead Framework. The implementation of this legacy system was initiated by me in 2012 and, after many improvements carried out by several developers in UniBO, it has been again significantly modified this year in order to achieve compatibility. The system consists of a simulation of an urban scenario where a certain amount of electrical vehicles are traveling along their specified routes. The vehicles are con-suming their battery and, thus, need to recharge at the charging stations. The electrical vehicles need to use a reservation mechanism to be able to recharge and avoid waiting lines, due to the long recharge process. The integration with the above mentioned framework consists in the publication of the services that the system provides to the end users through the instantiation of several Arrowhead Service Producers, together with a demo Arrowhead- compliant client application able to consume such services.

Enterprise Integration of Smart Objects using Semantic Service Descriptions

Integrating physical objects (smart objects) and enterprise IT systems is still a labor intensive, mainly manual task done by domain experts. On one hand, enterprise IT backend systems are based on service oriented architectures (SOA) and driven by business rule engines or business process execution engines. Smart objects on the other hand are often programmed at very low levels. In this paper we describe an approach that makes the integration of smart objects with such backends systems easier. We introduce semantic endpoint descriptions based on Linked USDL. Furthermore, we show how different communication patterns can be integrated into these endpoint descriptions. The strength of our endpoint descriptions is that they can be used to automatically create REST or SOAP endpoints for enterprise systems, even if which they are not able to talk to the smart objects directly. We evaluate our proposed solution with CoAP, UDP and 6LoWPAN, as we anticipate the industry converge towards these standards. Nonetheless, our approach also allows easy integration with backend systems, even if no standardized protocol is used.

Domain-Specific Multi-Modeling of Security Concerns in Service-Oriented Architectures

As a common reference for many in-development standards and execution frameworks, special attention is being paid to Service-Oriented Architectures. SOAs modeling, however, is an area in which a consensus has not being achieved. Currently, standardization organizations are defining proposals to offer a solution to this problem. Nevertheless, until very recently, non-functional aspects of services have not been considered for standardization processes. In particular, there exists a lack of a design solution that permits an independent development of the functional and non-functional concerns of SOAs, allowing that each concern be addressed in a convenient manner in early stages of the development, in a way that could guarantee the quality of this type of systems. This paper, leveraging on previous work, presents an approach to integrate security-related non-functional aspects (such as confidentiality, integrity, and access control) in the development of services.

Smart Spaces and Smart Objects interoperability Architecture (S3OiA)

The presented work aims to contribute towards the standardization and the interoperability off the Future Internet through an open and scalable architecture design. We present S³OiA as a syntactic/semantic Service-Oriented Architecture that allows the integration of any type of object or device, not mattering their nature, on the Internet of Things. Moreover, the architecture makes possible the use of underlying heterogeneous resources as a substrate for the automatic composition of complex applications through a semantic Triple Space paradigm. Created applications are dynamic and adaptive since they are able to evolve depending on the context where they are executed. The validation scenario of this architecture encompasses areas which are prone to involve human beings in order to promote personal autonomy, such as home-care automation environments and Ambient Assisted Living.

Provisión de servicios de procesado de imágenes basados en arquitecturas orientadas a servicios

Con este proyecto se pretende crear un procedimiento general para la implantación de aplicaciones de procesado de imágenes en cámaras de video IP y la distribución de dicha información mediante Arquitecturas Orientadas a Servicios (SOA). El objetivo principal es crear una aplicación que se ejecute en una cámara de video IP y realice un procesado básico sobre las imágenes capturadas (detección de colores, formas y patrones) permitiendo distribuir el resultado del procesado mediante las arquitecturas SOA descritas en la especificación DPWS (Device Profile for Web Services). El estudio se va a centrar principalmente en la transformación automática de código de procesado de imágenes escrito en Matlab (archivos .m) a un código C ANSI (archivos .c) que posteriormente se compilará para la arquitectura del procesador de la cámara (arquitectura CRIS, similar a la RISC pero con un conjunto reducido de instrucciones). ABSTRACT. This project aims to create a general procedure for the implementation of image processing applications in IP video cameras and the distribution of such information through Service Oriented Architectures (SOA). The main goal is to create an application that runs on IP video camera and carry out a basic processing on the captured images ( color detection, shapes and patterns) allowing to distribute the result of process by SOA architectures described in the DPWS specification (Device Profile for Web Services). The study will focus primarily on the automated transform of image processing code written in Matlab files (. M) to ANSI C code files (. C) which is then compiled to the processor architecture of the camera (CRIS architecture , similar to the RISC but with a reduced instruction set).

Analysis of service-oriented computing systems

La computación basada en servicios (Service-Oriented Computing, SOC) se estableció como un paradigma ampliamente aceptado para el desarollo de sistemas de software flexibles, distribuidos y adaptables, donde las composiciones de los servicios realizan las tareas más complejas o de nivel más alto, frecuentemente tareas inter-organizativas usando los servicios atómicos u otras composiciones de servicios. En tales sistemas, las propriedades de la calidad de servicio (Quality of Service, QoS), como la rapídez de procesamiento, coste, disponibilidad o seguridad, son críticas para la usabilidad de los servicios o sus composiciones en cualquier aplicación concreta. El análisis de estas propriedades se puede realizarse de una forma más precisa y rica en información si se utilizan las técnicas de análisis de programas, como el análisis de complejidad o de compartición de datos, que son capables de analizar simultáneamente tanto las estructuras de control como las de datos, dependencias y operaciones en una composición. El análisis de coste computacional para la composicion de servicios puede ayudar a una monitorización predictiva así como a una adaptación proactiva a través de una inferencia automática de coste computacional, usando los limites altos y bajos como funciones del valor o del tamaño de los mensajes de entrada. Tales funciones de coste se pueden usar para adaptación en la forma de selección de los candidatos entre los servicios que minimizan el coste total de la composición, basado en los datos reales que se pasan al servicio. Las funciones de coste también pueden ser combinadas con los parámetros extraídos empíricamente desde la infraestructura, para producir las funciones de los límites de QoS sobre los datos de entrada, cuales se pueden usar para previsar, en el momento de invocación, las violaciones de los compromisos al nivel de servicios (Service Level Agreements, SLA) potenciales or inminentes. En las composiciones críticas, una previsión continua de QoS bastante eficaz y precisa se puede basar en el modelado con restricciones de QoS desde la estructura de la composition, datos empiricos en tiempo de ejecución y (cuando estén disponibles) los resultados del análisis de complejidad. Este enfoque se puede aplicar a las orquestaciones de servicios con un control centralizado del flujo, así como a las coreografías con participantes multiples, siguiendo unas interacciones complejas que modifican su estado. El análisis del compartición de datos puede servir de apoyo para acciones de adaptación, como la paralelización, fragmentación y selección de los componentes, las cuales son basadas en dependencias funcionales y en el contenido de información en los mensajes, datos internos y las actividades de la composición, cuando se usan construcciones de control complejas, como bucles, bifurcaciones y flujos anidados. Tanto las dependencias funcionales como el contenido de información (descrito a través de algunos atributos definidos por el usuario) se pueden expresar usando una representación basada en la lógica de primer orden (claúsulas de Horn), y los resultados del análisis se pueden interpretar como modelos conceptuales basados en retículos. ABSTRACT Service-Oriented Computing (SOC) is a widely accepted paradigm for development of flexible, distributed and adaptable software systems, in which service compositions perform more complex, higher-level, often cross-organizational tasks using atomic services or other service compositions. In such systems, Quality of Service (QoS) properties, such as the performance, cost, availability or security, are critical for the usability of services and their compositions in concrete applications. Analysis of these properties can become more precise and richer in information, if it employs program analysis techniques, such as the complexity and sharing analyses, which are able to simultaneously take into account both the control and the data structures, dependencies, and operations in a composition. Computation cost analysis for service composition can support predictive monitoring and proactive adaptation by automatically inferring computation cost using the upper and lower bound functions of value or size of input messages. These cost functions can be used for adaptation by selecting service candidates that minimize total cost of the composition, based on the actual data that is passed to them. The cost functions can also be combined with the empirically collected infrastructural parameters to produce QoS bounds functions of input data that can be used to predict potential or imminent Service Level Agreement (SLA) violations at the moment of invocation. In mission-critical applications, an effective and accurate continuous QoS prediction, based on continuations, can be achieved by constraint modeling of composition QoS based on its structure, known data at runtime, and (when available) the results of complexity analysis. This approach can be applied to service orchestrations with centralized flow control, and choreographies with multiple participants with complex stateful interactions. Sharing analysis can support adaptation actions, such as parallelization, fragmentation, and component selection, which are based on functional dependencies and information content of the composition messages, internal data, and activities, in presence of complex control constructs, such as loops, branches, and sub-workflows. Both the functional dependencies and the information content (described using user-defined attributes) can be expressed using a first-order logic (Horn clause) representation, and the analysis results can be interpreted as a lattice-based conceptual models.

REST service testing based on inferred XML schemas

The concept of service oriented architecture has been extensively explored in software engineering, due to the fact that it produces architectures made up of several interconnected modules, easy to reuse when building new systems. This approach to design would be impossible without interconnection mechanisms such as REST (Representationa State Transfer) services, which allow module communication while minimizing coupling. . However, this low coupling brings disadvantages, such as the lack of transparency, which makes it difficult to sistematically create tests without knowledge of the inner working of a system. In this article, we present an automatic error detection system for REST services, based on a statistical analysis over responses produced at multiple service invocations. Thus, a service can be systematically tested without knowing its full specification. The method can find errors in REST services which could not be identified by means of traditional testing methods, and provides limited testing coverage for services whose response format is unknown. It can be also useful as a complement to other testing mechanisms.

Contributions to the Resilience Management in the Internet of Things

El auge del "Internet de las Cosas" (IoT, "Internet of Things") y sus tecnologías asociadas han permitido su aplicación en diversos dominios de la aplicación, entre los que se encuentran la monitorización de ecosistemas forestales, la gestión de catástrofes y emergencias, la domótica, la automatización industrial, los servicios para ciudades inteligentes, la eficiencia energética de edificios, la detección de intrusos, la gestión de desastres y emergencias o la monitorización de señales corporales, entre muchas otras. La desventaja de una red IoT es que una vez desplegada, ésta queda desatendida, es decir queda sujeta, entre otras cosas, a condiciones climáticas cambiantes y expuestas a catástrofes naturales, fallos de software o hardware, o ataques maliciosos de terceros, por lo que se puede considerar que dichas redes son propensas a fallos. El principal requisito de los nodos constituyentes de una red IoT es que estos deben ser capaces de seguir funcionando a pesar de sufrir errores en el propio sistema. La capacidad de la red para recuperarse ante fallos internos y externos inesperados es lo que se conoce actualmente como "Resiliencia" de la red. Por tanto, a la hora de diseñar y desplegar aplicaciones o servicios para IoT, se espera que la red sea tolerante a fallos, que sea auto-configurable, auto-adaptable, auto-optimizable con respecto a nuevas condiciones que puedan aparecer durante su ejecución. Esto lleva al análisis de un problema fundamental en el estudio de las redes IoT, el problema de la "Conectividad". Se dice que una red está conectada si todo par de nodos en la red son capaces de encontrar al menos un camino de comunicación entre ambos. Sin embargo, la red puede desconectarse debido a varias razones, como que se agote la batería, que un nodo sea destruido, etc. Por tanto, se hace necesario gestionar la resiliencia de la red con el objeto de mantener la conectividad entre sus nodos, de tal manera que cada nodo IoT sea capaz de proveer servicios continuos, a otros nodos, a otras redes o, a otros servicios y aplicaciones. En este contexto, el objetivo principal de esta tesis doctoral se centra en el estudio del problema de conectividad IoT, más concretamente en el desarrollo de modelos para el análisis y gestión de la Resiliencia, llevado a la práctica a través de las redes WSN, con el fin de mejorar la capacidad la tolerancia a fallos de los nodos que componen la red. Este reto se aborda teniendo en cuenta dos enfoques distintos, por una parte, a diferencia de otro tipo de redes de dispositivos convencionales, los nodos en una red IoT son propensos a perder la conexión, debido a que se despliegan en entornos aislados, o en entornos con condiciones extremas; por otra parte, los nodos suelen ser recursos con bajas capacidades en términos de procesamiento, almacenamiento y batería, entre otros, por lo que requiere que el diseño de la gestión de su resiliencia sea ligero, distribuido y energéticamente eficiente. En este sentido, esta tesis desarrolla técnicas auto-adaptativas que permiten a una red IoT, desde la perspectiva del control de su topología, ser resiliente ante fallos en sus nodos. Para ello, se utilizan técnicas basadas en lógica difusa y técnicas de control proporcional, integral y derivativa (PID - "proportional-integral-derivative"), con el objeto de mejorar la conectividad de la red, teniendo en cuenta que el consumo de energía debe preservarse tanto como sea posible. De igual manera, se ha tenido en cuenta que el algoritmo de control debe ser distribuido debido a que, en general, los enfoques centralizados no suelen ser factibles a despliegues a gran escala. El presente trabajo de tesis implica varios retos que conciernen a la conectividad de red, entre los que se incluyen: la creación y el análisis de modelos matemáticos que describan la red, una propuesta de sistema de control auto-adaptativo en respuesta a fallos en los nodos, la optimización de los parámetros del sistema de control, la validación mediante una implementación siguiendo un enfoque de ingeniería del software y finalmente la evaluación en una aplicación real. Atendiendo a los retos anteriormente mencionados, el presente trabajo justifica, mediante una análisis matemático, la relación existente entre el "grado de un nodo" (definido como el número de nodos en la vecindad del nodo en cuestión) y la conectividad de la red, y prueba la eficacia de varios tipos de controladores que permiten ajustar la potencia de trasmisión de los nodos de red en respuesta a eventuales fallos, teniendo en cuenta el consumo de energía como parte de los objetivos de control. Así mismo, este trabajo realiza una evaluación y comparación con otros algoritmos representativos; en donde se demuestra que el enfoque desarrollado es más tolerante a fallos aleatorios en los nodos de la red, así como en su eficiencia energética. Adicionalmente, el uso de algoritmos bioinspirados ha permitido la optimización de los parámetros de control de redes dinámicas de gran tamaño. Con respecto a la implementación en un sistema real, se han integrado las propuestas de esta tesis en un modelo de programación OSGi ("Open Services Gateway Initiative") con el objeto de crear un middleware auto-adaptativo que mejore la gestión de la resiliencia, especialmente la reconfiguración en tiempo de ejecución de componentes software cuando se ha producido un fallo. Como conclusión, los resultados de esta tesis doctoral contribuyen a la investigación teórica y, a la aplicación práctica del control resiliente de la topología en redes distribuidas de gran tamaño. Los diseños y algoritmos presentados pueden ser vistos como una prueba novedosa de algunas técnicas para la próxima era de IoT. A continuación, se enuncian de forma resumida las principales contribuciones de esta tesis: (1) Se han analizado matemáticamente propiedades relacionadas con la conectividad de la red. Se estudia, por ejemplo, cómo varía la probabilidad de conexión de la red al modificar el alcance de comunicación de los nodos, así como cuál es el mínimo número de nodos que hay que añadir al sistema desconectado para su re-conexión. (2) Se han propuesto sistemas de control basados en lógica difusa para alcanzar el grado de los nodos deseado, manteniendo la conectividad completa de la red. Se han evaluado diferentes tipos de controladores basados en lógica difusa mediante simulaciones, y los resultados se han comparado con otros algoritmos representativos. (3) Se ha investigado más a fondo, dando un enfoque más simple y aplicable, el sistema de control de doble bucle, y sus parámetros de control se han optimizado empleando algoritmos heurísticos como el método de la entropía cruzada (CE, "Cross Entropy"), la optimización por enjambre de partículas (PSO, "Particle Swarm Optimization"), y la evolución diferencial (DE, "Differential Evolution"). (4) Se han evaluado mediante simulación, la mayoría de los diseños aquí presentados; además, parte de los trabajos se han implementado y validado en una aplicación real combinando técnicas de software auto-adaptativo, como por ejemplo las de una arquitectura orientada a servicios (SOA, "Service-Oriented Architecture"). ABSTRACT The advent of the Internet of Things (IoT) enables a tremendous number of applications, such as forest monitoring, disaster management, home automation, factory automation, smart city, etc. However, various kinds of unexpected disturbances may cause node failure in the IoT, for example battery depletion, software/hardware malfunction issues and malicious attacks. So, it can be considered that the IoT is prone to failure. The ability of the network to recover from unexpected internal and external failures is known as "resilience" of the network. Resilience usually serves as an important non-functional requirement when designing IoT, which can further be broken down into "self-*" properties, such as self-adaptive, self-healing, self-configuring, self-optimization, etc. One of the consequences that node failure brings to the IoT is that some nodes may be disconnected from others, such that they are not capable of providing continuous services for other nodes, networks, and applications. In this sense, the main objective of this dissertation focuses on the IoT connectivity problem. A network is regarded as connected if any pair of different nodes can communicate with each other either directly or via a limited number of intermediate nodes. More specifically, this thesis focuses on the development of models for analysis and management of resilience, implemented through the Wireless Sensor Networks (WSNs), which is a challenging task. On the one hand, unlike other conventional network devices, nodes in the IoT are more likely to be disconnected from each other due to their deployment in a hostile or isolated environment. On the other hand, nodes are resource-constrained in terms of limited processing capability, storage and battery capacity, which requires that the design of the resilience management for IoT has to be lightweight, distributed and energy-efficient. In this context, the thesis presents self-adaptive techniques for IoT, with the aim of making the IoT resilient against node failures from the network topology control point of view. The fuzzy-logic and proportional-integral-derivative (PID) control techniques are leveraged to improve the network connectivity of the IoT in response to node failures, meanwhile taking into consideration that energy consumption must be preserved as much as possible. The control algorithm itself is designed to be distributed, because the centralized approaches are usually not feasible in large scale IoT deployments. The thesis involves various aspects concerning network connectivity, including: creation and analysis of mathematical models describing the network, proposing self-adaptive control systems in response to node failures, control system parameter optimization, implementation using the software engineering approach, and evaluation in a real application. This thesis also justifies the relations between the "node degree" (the number of neighbor(s) of a node) and network connectivity through mathematic analysis, and proves the effectiveness of various types of controllers that can adjust power transmission of the IoT nodes in response to node failures. The controllers also take into consideration the energy consumption as part of the control goals. The evaluation is performed and comparison is made with other representative algorithms. The simulation results show that the proposals in this thesis can tolerate more random node failures and save more energy when compared with those representative algorithms. Additionally, the simulations demonstrate that the use of the bio-inspired algorithms allows optimizing the parameters of the controller. With respect to the implementation in a real system, the programming model called OSGi (Open Service Gateway Initiative) is integrated with the proposals in order to create a self-adaptive middleware, especially reconfiguring the software components at runtime when failures occur. The outcomes of this thesis contribute to theoretic research and practical applications of resilient topology control for large and distributed networks. The presented controller designs and optimization algorithms can be viewed as novel trials of the control and optimization techniques for the coming era of the IoT. The contributions of this thesis can be summarized as follows: (1) Mathematically, the fault-tolerant probability of a large-scale stochastic network is analyzed. It is studied how the probability of network connectivity depends on the communication range of the nodes, and what is the minimum number of neighbors to be added for network re-connection. (2) A fuzzy-logic control system is proposed, which obtains the desired node degree and in turn maintains the network connectivity when it is subject to node failures. There are different types of fuzzy-logic controllers evaluated by simulations, and the results demonstrate the improvement of fault-tolerant capability as compared to some other representative algorithms. (3) A simpler but more applicable approach, the two-loop control system is further investigated, and its control parameters are optimized by using some heuristic algorithms such as Cross Entropy (CE), Particle Swarm Optimization (PSO), and Differential Evolution (DE). (4) Most of the designs are evaluated by means of simulations, but part of the proposals are implemented and tested in a real-world application by combining the self-adaptive software technique and the control algorithms which are presented in this thesis.

Desarrollo de una plataforma de gestión de un laboratorio automatizado

El presente TFG está enmarcado en el contexto de la biología sintética (más concretamente en la automatización de protocolos) y representa una parte de los avances en este sector. Se trata de una plataforma de gestión de laboratorios autónomos. El resultado tecnológico servirá para ayudar al operador a coordinar las máquinas disponibles en un laboratorio a la hora de ejecutar un experimento basado en un protocolo de biología sintética. En la actualidad los experimentos biológicos tienen una tasa de éxito muy baja en laboratorios convencionales debido a la cantidad de factores externos que intervienen durante el protocolo. Además estos experimentos son caros y requieren de un operador pendiente de la ejecución en cada fase del protocolo. La automatización de laboratorios puede suponer un aumento de la tasa de éxito, además de una reducción de costes y de riesgos para los trabajadores en el entorno del laboratorio. En la presente propuesta se pretende que se dividan las distintas entidades de un laboratorio en unidades funcionales que serán los elementos a ser coordinados por la herramienta resultado del TFG. Para aportar flexibilidad a la herramienta se utilizará una arquitectura orientada a servicios (SOA). Cada unidad funcional desplegará un servicio web proporcionando su funcionalidad al resto del laboratorio. SOA es esencial para la comunicación entre máquinas ya que permite la abstracción del tipo de máquina que se trate y como esté implementada su funcionalidad. La principal dificultad del TFG consiste en lidiar con las dificultades de integración y coordinación de las distintas unidades funcionales para poder gestionar adecuadamente el ciclo de vida de un experimento. Para ello se ha realizado un análisis de herramientas disponibles de software libre. Finalmente se ha escogido la plataforma Apache Camel como marco sobre el que crear la herramienta específica planteada en el TFG. Apache Camel juega un papel importantísimo en este proyecto, ya que establece las capas de conexión a los distintos servicios y encamina los mensajes oportunos a cada servicio basándose en el contenido del fichero de entrada. Para la preparación del prototipo se han desarrollado una serie de servicios web que permitirán realizar pruebas y demostraciones de concepto de la herramienta en sí. Además se ha desarrollado una versión preliminar de la aplicación web que utilizará el operador del laboratorio para gestionar las peticiones, decidiendo que protocolo se ejecuta a continuación y siguiendo el flujo de tareas del experimento.---ABSTRACT---The current TFG is bound by synthetic biology context (more specifically in the protocol automation) and represents an element of progression in this sector. It consists of a management platform for automated laboratories. The technological result will help the operator to coordinate the available machines in a lab, this way an experiment based on a synthetic biological protocol, could be executed. Nowadays, the biological experiments have a low success rate in conventional laboratories, due to the amount of external factors that intrude during the protocol. On top of it, these experiments are usually expensive and require of an operator monitoring at every phase of the protocol. The laboratories’ automation might mean an increase in the success rate, and also a reduction of costs and risks for the lab workers. The current approach is hoped to divide the different entities in a laboratory in functional units. Those will be the elements to be coordinated by the tool that results from this TFG. In order to provide flexibility to the system, a service-oriented architecture will be used (SOA). Every functional unit will deploy a web service, publishing its functionality to the rest of the lab. SOA is essential to facilitate the communication between machines, due to the fact that it provides an abstraction on the type of the machine and how its functionality is implemented. The main difficulty of this TFG consists on grappling with the integration and coordination problems, being able to manage successfully the lifecycle of an experiment. For that, a benchmark has been made on the available open source tools. Finally Apache Camel has been chosen as a framework over which the tool defined in the TFG will be created. Apache Camel plays a fundamental role in this project, given that it establishes the connection layers to the different services and routes the suitable messages to each service, based on the received file’s content. For the prototype development a number of services that will allow it to perform demonstrations and concept tests have been deployed. Furthermore a preliminary version of the webapp has been developed. It will allow the laboratory operator managing petitions, to decide what protocol goes next as it executes the flow of the experiment’s tasks.

A Construction Management Framework for Mass Customisation in Traditional Construction

A Mass Customisation model is discussed as a competitive positioning strategy in the marketplace adding value to the customer’s end-use. It includes the user as part of the construction process responding to the customer’s demands and wishes. To the present day, almost all proposals for Mass Customisation have been focused on the design phase and single family houses. The reality is that the processes carried out in the work execution are so inefficient that the costs of the Mass Customisation models are assumed by the customer and they do not offer solutions that support the change management. Furthermore, this inefficiency often makes Mass Customisation unfeasible in terms of deadlines and site management. Therefore, the present proposal focuses on achieving the paradigm of Mass Customisation in the traditional residential construction complementary to the existing proposals in the design phase. All this through the proposal of a framework for the integral management in the work execution, which will address change management introduced by the users offering an efficient and productive model that reduces costs in the process. This model will focus on the synergy between different strategies, techniques and technologies currently used in the construction management (such as Lean Construction or Six Sigma), together with, other strategies and technologies that have proven to be valid solutions in other fields (such as Business Process Management, Service Oriented Architecture, etc.).

Smart Monitoring Embedded Service for Energy-Efficient and Sustainable Management in Data Centers

Information technologies (IT) currently represent 2% of CO2 emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile required to support the model.