Design and implementation of a clinical dashboard

In a large health care system, the importance of accurate information as feedback mechanisms about its performance is necessary on many levels from the senior level management to service level managers for valid decision-making purposes. The implementation of dashboards is one way to remedy the problem of data overload by providing up-to-date, accurate, and concise information. As this health care system seeks to have an organized, systematic review mechanism in place, dashboards are being created in a variety of the hospital service departments to monitor performance indicators. The Infection Control Administration of this health care system is one that does not currently utilize a dashboard but seeks to implement one. ^ The purpose of this project is to research and design a clinical dashboard for the Infection Control Administration. The intent is that the implementation and usefulness of the clinical dashboard translates into improvement in the measurement of health care quality.^

Intelligent context-aware services based on internet of things architectures

La Internet de las Cosas (IoT), como parte de la Futura Internet, se ha convertido en la actualidad en uno de los principales temas de investigación; en parte gracias a la atención que la sociedad está poniendo en el desarrollo de determinado tipo de servicios (telemetría, generación inteligente de energía, telesanidad, etc.) y por las recientes previsiones económicas que sitúan a algunos actores, como los operadores de telecomunicaciones (que se encuentran desesperadamente buscando nuevas oportunidades), al frente empujando algunas tecnologías interrelacionadas como las comunicaciones Máquina a Máquina (M2M). En este contexto, un importante número de actividades de investigación a nivel mundial se están realizando en distintas facetas: comunicaciones de redes de sensores, procesado de información, almacenamiento de grandes cantidades de datos (big--‐data), semántica, arquitecturas de servicio, etc. Todas ellas, de forma independiente, están llegando a un nivel de madurez que permiten vislumbrar la realización de la Internet de las Cosas más que como un sueño, como una realidad tangible. Sin embargo, los servicios anteriormente mencionados no pueden esperar a desarrollarse hasta que las actividades de investigación obtengan soluciones holísticas completas. Es importante proporcionar resultados intermedios que eviten soluciones verticales realizadas para desarrollos particulares. En este trabajo, nos hemos focalizado en la creación de una plataforma de servicios que pretende facilitar, por una parte la integración de redes de sensores y actuadores heterogéneas y geográficamente distribuidas, y por otra lado el desarrollo de servicios horizontales utilizando dichas redes y la información que proporcionan. Este habilitador se utilizará para el desarrollo de servicios y para la experimentación en la Internet de las Cosas. Previo a la definición de la plataforma, se ha realizado un importante estudio focalizando no sólo trabajos y proyectos de investigación, sino también actividades de estandarización. Los resultados se pueden resumir en las siguientes aseveraciones: a) Los modelos de datos definidos por el grupo “Sensor Web Enablement” (SWE™) del “Open Geospatial Consortium (OGC®)” representan hoy en día la solución más completa para describir las redes de sensores y actuadores así como las observaciones. b) Las interfaces OGC, a pesar de las limitaciones que requieren cambios y extensiones, podrían ser utilizadas como las bases para acceder a sensores y datos. c) Las redes de nueva generación (NGN) ofrecen un buen sustrato que facilita la integración de redes de sensores y el desarrollo de servicios. En consecuencia, una nueva plataforma de Servicios, llamada Ubiquitous Sensor Networks (USN), se ha definido en esta Tesis tratando de contribuir a rellenar los huecos previamente mencionados. Los puntos más destacados de la plataforma USN son: a) Desde un punto de vista arquitectónico, sigue una aproximación de dos niveles (Habilitador y Gateway) similar a otros habilitadores que utilizan las NGN (como el OMA Presence). b) Los modelos de datos están basado en los estándares del OGC SWE. iv c) Está integrado en las NGN pero puede ser utilizado sin ellas utilizando infraestructuras IP abiertas. d) Las principales funciones son: Descubrimiento de sensores, Almacenamiento de observaciones, Publicacion--‐subscripcion--‐notificación, ejecución remota homogénea, seguridad, gestión de diccionarios de datos, facilidades de monitorización, utilidades de conversión de protocolos, interacciones síncronas y asíncronas, soporte para el “streaming” y arbitrado básico de recursos. Para demostrar las funcionalidades que la Plataforma USN propuesta pueden ofrecer a los futuros escenarios de la Internet de las Cosas, se presentan resultados experimentales de tres pruebas de concepto (telemetría, “Smart Places” y monitorización medioambiental) reales a pequeña escala y un estudio sobre semántica (sistema de información vehicular). Además, se está utilizando actualmente como Habilitador para desarrollar tanto experimentación como servicios reales en el proyecto Europeo SmartSantander (que aspira a integrar alrededor de 20.000 dispositivos IoT). v Abstract Internet of Things, as part of the Future Internet, has become one of the main research topics nowadays; in part thanks to the pressure the society is putting on the development of a particular kind of services (Smart metering, Smart Grids, eHealth, etc.), and by the recent business forecasts that situate some players, like Telecom Operators (which are desperately seeking for new opportunities), at the forefront pushing for some interrelated technologies like Machine--‐to--‐Machine (M2M) communications. Under this context, an important number of research activities are currently taking place worldwide at different levels: sensor network communications, information processing, big--‐ data storage, semantics, service level architectures, etc. All of them, isolated, are arriving to a level of maturity that envision the achievement of Internet of Things (IoT) more than a dream, a tangible goal. However, the aforementioned services cannot wait to be developed until the holistic research actions bring complete solutions. It is important to come out with intermediate results that avoid vertical solutions tailored for particular deployments. In the present work, we focus on the creation of a Service--‐level platform intended to facilitate, from one side the integration of heterogeneous and geographically disperse Sensors and Actuator Networks (SANs), and from the other the development of horizontal services using them and the information they provide. This enabler will be used for horizontal service development and for IoT experimentation. Prior to the definition of the platform, we have realized an important study targeting not just research works and projects, but also standardization topics. The results can be summarized in the following assertions: a) Open Geospatial Consortium (OGC®) Sensor Web Enablement (SWE™) data models today represent the most complete solution to describe SANs and observations. b) OGC interfaces, despite the limitations that require changes and extensions, could be used as the bases for accessing sensors and data. c) Next Generation Networks (NGN) offer a good substrate that facilitates the integration of SANs and the development of services. Consequently a new Service Layer platform, called Ubiquitous Sensor Networks (USN), has been defined in this Thesis trying to contribute to fill in the previous gaps. The main highlights of the proposed USN Platform are: a) From an architectural point of view, it follows a two--‐layer approach (Enabler and Gateway) similar to other enablers that run on top of NGN (like the OMA Presence). b) Data models and interfaces are based on the OGC SWE standards. c) It is integrated in NGN but it can be used without it over open IP infrastructures. d) Main functions are: Sensor Discovery, Observation Storage, Publish--‐Subscribe--‐Notify, homogeneous remote execution, security, data dictionaries handling, monitoring facilities, authorization support, protocol conversion utilities, synchronous and asynchronous interactions, streaming support and basic resource arbitration. vi In order to demonstrate the functionalities that the proposed USN Platform can offer to future IoT scenarios, some experimental results have been addressed in three real--‐life small--‐scale proofs--‐of concepts (Smart Metering, Smart Places and Environmental monitoring) and a study for semantics (in--‐vehicle information system). Furthermore we also present the current use of the proposed USN Platform as an Enabler to develop experimentation and real services in the SmartSantander EU project (that aims at integrating around 20.000 IoT devices).

Methodology for developing and application outsourcing in the cloud using SOA

New technologies such as, the new Information and Communication Technology ICT, break new paths and redefines the way we understand business, the Cloud Computing is one of them. The on demand resource gathering and the per usage payment scheme are now commonplace, and allows companies to save on their ICT investments. Despite the importance of this issue, we still lack methodologies that help companies, to develop applications oriented for its exploitation in the Cloud. In this study we aim to fill this gap and propose a methodology for the development of ICT applications, which are directed towards a business model, and further outsourcing in the Cloud. In the former the Development of SOA applications, we take, as a baseline scenario, a business model from which to obtain a business process model. To this end, we use software engineering tools; and in the latter The Outsourcing we propose a guide that would facilitate uploading business models into the Cloud; to this end we describe a SOA governance model, which controls the SOA. Additionally we propose a Cloud government that integrates Service Level Agreements SLAs, plus SOA governance, and Cloud architecture. Finally we apply our methodology in an example illustrating our proposal. We believe that our proposal can be used as a guide/pattern for the development of business applications.

Diseño y configuración de una red de comunicaciones en un Centro de Contactos - Contact Center

Este proyecto muestra una solución de red para una empresa que presta servicios de Contact Center desde distintas sedes distribuidas geográficamente, utilizando la tecnología de telefonía sobre IP. El objetivo de este proyecto es el de convertirse en una guía de diseño para el despliegue de soluciones de red utilizando los actuales equipos de comunicaciones desarrollados por el fabricante Cisco Systems, Inc., los equipos de seguridad desarrollados por el fabricante Fortinet y los sistemas de telefonía desarrollados por Avaya Inc. y Oracle Corporation, debido a su gran penetración en el mercado y a las aportaciones que cada uno ha realizado en el sector de Contact Center. Para poder proveer interconexión entre las sedes de un Contact Center se procede a la contratación de un acceso a la red MPLS perteneciente a un operador de telecomunicaciones, quien provee conectividad entre las sedes utilizando la tecnología VPN MPLS con dos accesos diversificados entre sí desde cada una de las sedes del Contact Center. El resultado de esta contratación es el aprovechamiento de las ventajas que un operador de telecomunicaciones puede ofrecer a sus clientes, en relación a calidad de servicio, disponibilidad y expansión geográfica. De la misma manera, se definen una serie de criterios o niveles de servicio que aseguran a un Contact Center una comunicación de calidad entre sus sedes, entendiéndose por comunicación de calidad aquella que sea capaz de transmitirse con unos valores mínimos de pérdida de paquetes así como retraso en la transmisión, y una velocidad acorde a la demanda de los servicios de voz y datos. Como parte de la solución, se diseña una conexión redundante a Internet que proporciona acceso a todas las sedes del Contact Center. La solución de conectividad local en cada una de las sedes de un Contact Center se ha diseñado de manera general acorde al volumen de puestos de usuarios y escalabilidad que pueda tener cada una de las sedes. De esta manera se muestran varias opciones asociadas al equipamiento actual que ofrece el fabricante Cisco Systems, Inc.. Como parte de la solución se han definido los criterios de calidad para la elección de los Centros de Datos (Data Center). Un Contact Center tiene conexiones hacia o desde las empresas cliente a las que da servicio y provee de acceso a la red a sus tele-trabajadores. Este requerimiento junto con el acceso y servicios publicados en Internet necesita una infraestructura de seguridad. Este hecho da lugar al diseño de una solución que unifica todas las conexiones bajo una única infraestructura, dividiendo de manera lógica o virtual cada uno de los servicios. De la misma manera, se ha definido la utilización de protocolos como 802.1X para evitar accesos no autorizados a la red del Contact Center. La solución de voz elegida es heterogénea y capaz de soportar los protocolos de señalización más conocidos (SIP y H.323). De esta manera se busca tener la máxima flexibilidad para establecer enlaces de voz sobre IP (Trunk IP) con proveedores y clientes. Esto se logra gracias a la utilización de SBCs y a una infraestructura interna de voz basada en el fabricante Avaya Inc. Los sistemas de VoIP en un Contact Center son los elementos clave para poder realizar la prestación del servicio; por esta razón se elige una solución redundada bajo un entorno virtual. Esta solución permite desplegar el sistema de VoIP desde cualquiera de los Data Center del Contact Center. La solución llevada a cabo en este proyecto está principalmente basada en mi experiencia laboral adquirida durante los últimos siete años en el departamento de comunicaciones de una empresa de Contact Center. He tenido en cuenta los principales requerimientos que exigen hoy en día la mayor parte de empresas que desean contratar un servicio de Contact Center. Este proyecto está dividido en cuatro capítulos. El primer capítulo es una introducción donde se explican los principales escenarios de negocio y áreas técnicas necesarias para la prestación de servicios de Contact Center. El segundo capítulo describe de manera resumida, las principales tecnologías y protocolos que serán utilizados para llevar a cabo el diseño de la solución técnica de creación de una red de comunicaciones para una empresa de Contact Center. En el tercer capítulo se expone la solución técnica necesaria para permitir que una empresa de Contact Center preste sus servicios desde distintas ubicaciones distribuidas geográficamente, utilizando dos Data Centers donde se centralizan las aplicaciones de voz y datos. Finalmente, en el cuarto capítulo se presentan las conclusiones obtenidas tras la elaboración de la presente memoria, así como una propuesta de trabajos futuros, que permitirían junto con el proyecto actual, realizar una solución técnica completa incluyendo otras áreas tecnológicas necesarias en una empresa de Contact Center. Todas las ilustraciones y tablas de este proyecto son de elaboración propia a partir de mi experiencia profesional y de la información obtenida en diversos formatos de la bibliografía consultada, excepto en los casos en los que la fuente es mencionada. ABSTRACT This project shows a network solution for a company that provides Contact Center services from different locations geographically distributed, using the Telephone over Internet Protocol (ToIP) technology. The goal of this project is to become a design guide for performing network solutions using current communications equipment developed by the manufacturer Cisco Systems, Inc., firewalls developed by the manufacturer Fortinet and telephone systems developed by Avaya Inc. and Oracle Corporation, due to their great market reputation and their contributions that each one has made in the field of Contact Center. In order to provide interconnection between its different sites, the Contact Center needs to hire the services of a telecommunications’ operator, who will use the VPN MPLS technology, with two diversified access from each Contact Center’s site. The result of this hiring is the advantage of the benefits that a telecommunications operator can offer to its customers, regarding quality of service, availability and geographical expansion. Likewise, Service Level Agreement (SLA) has to be defined to ensure the Contact Center quality communication between their sites. A quality communication is understood as a communication that is capable of being transmitted with minimum values of packet loss and transmission delays, and a speed according to the demand for its voice and data services. As part of the solution, a redundant Internet connection has to be designed to provide access to every Contact Center’s site. The local connectivity solution in each of the Contact Center’s sites has to be designed according to its volume of users and scalability that each one may have. Thereby, the manufacturer Cisco Systems, Inc. offers several options associated with the current equipment. As part of the solution, quality criteria are being defined for the choice of the Data Centers. A Contact Center has connections to/from the client companies that provide network access to teleworkers. This requires along the access and services published on the Internet, needs a security infrastructure. Therefore is been created a solution design that unifies all connections under a single infrastructure, dividing each services in a virtual way. Likewise, is been defined the use of protocols, such as 802.1X, to prevent unauthorized access to the Contact Center’s network. The voice solution chosen is heterogeneous and capable of supporting best-known signaling protocols (SIP and H.323) in order to have maximum flexibility to establish links of Voice over IP (IP Trunk) with suppliers and clients. This can be achieved through the use of SBC and an internal voice infrastructure based on Avaya Inc. The VoIP systems in a Contact Center are the key elements to be able to provide the service; for this reason a redundant solution under virtual environment is been chosen. This solution allows any of the Data Centers to deploy the VoIP system. The solution carried out in this project is mainly based on my own experience acquired during the past seven years in the communications department of a Contact Center company. I have taken into account the main requirements that most companies request nowadays when they hire a Contact Center service. This project is divided into four chapters. The first chapter is an introduction that explains the main business scenarios and technical areas required to provide Contact Center services. The second chapter describes briefly the key technologies and protocols that will be used to carry out the design of the technical solution for the creation of a communications network in a Contact Center company. The third chapter shows a technical solution required that allows a Contact Center company to provide services from across geographically distributed locations, using two Data Centers where data and voice applications are centralized. Lastly, the fourth chapter includes the conclusions gained after making this project, as well as a future projects proposal, which would allow along the current project, to perform a whole technical solution including other necessary technologic areas in a Contact Center company All illustrations and tables of this project have been made by myself from my professional experience and the information obtained in various formats of the bibliography, except in the cases where the source is indicated.

Dirección estratégica de la asignatura Dirección Estratégica de las Tecnologías de la Información

¿Se pueden utilizar las habilidades, las técnicas y los principios de la dirección estratégica en el diseño y ejecución de la programación docente de una asignatura? Esta es la pregunta que nos planteamos al diseñar la asignatura Dirección Estratégica de las Tecnologías de la Información perteneciente al Máster Universitario en Ingeniería Informática de la Universidad de Alicante. Estas técnicas las aplicaremos a aspectos clave de la innovación educativa: contrato pedagógico, objetivos, evaluación, trabajo en equipo y comunicación oral. Algunas de las propuestas innovadoras, que tienen el doble objetivo de ser un instrumento de la asignatura pero al mismo tiempo recoger aspectos de dirección y de mejora continua, son el SLA (“Service Level Agreement”) de aprendizaje, las actas de aprendizaje, el análisis de tendencias en las TI y el espacio para la creatividad. Tras dos cursos académicos de ajuste de la propuesta docente, en el curso 2014-2015 hemos analizado el nivel de satisfacción de los estudiantes con la misma y la autoevaluación crítica de los profesores que la han impartido. Los resultados han sido muy satisfactorios, con comentarios del estilo “ha sido una experiencia de aprendizaje efectivo”. Los estudiantes agradecen que los profesores prediquemos con el ejemplo. Nos hace más humanos y más creíbles.

Differences between theoretical predictions and operational performance in a stock control application

Over the past decade, several experienced Operational Researchers have advanced the view that the theoretical aspects of model building have raced ahead of the ability of people to use them. Consequently, the impact of Operational Research on commercial organisations and the public sector is limited, and many systems fail to achieve their anticipated benefits in full. The primary objective of this study is to examine a complex interactive Stock Control system, and identify the reasons for the differences between the theoretical expectations and the operational performance. The methodology used is to hypothesise all the possible factors which could cause a divergence between theory and practice, and to evaluate numerically the effect each of these factors has on two main control indices - Service Level and Average Stock Value. Both analytical and empirical methods are used, and simulation is employed extensively. The factors are divided into two main categories for analysis - theoretical imperfections in the model, and the usage of the system by Buyers. No evidence could be found in the literature of any previous attempts to place the differences between theory and practice in a system in quantitative perspective nor, more specifically, to study the effects of Buyer/computer interaction in a Stock Control system. The study reveals that, in general, the human factors influencing performance are of a much higher order of magnitude than the theoretical factors, thus providing objective evidence to support the original premise. The most important finding is that, by judicious intervention into an automatic stock control algorithm, it is possible for Buyers to produce results which not only attain but surpass the algorithmic predictions. However, the complexity and behavioural recalcitrance of these systems are such that an innately numerate, enquiring type of Buyer needs to be inducted to realise the performance potential of the overall man/computer system.

Design of a stock control methodology for use within an oil blending company

The thesis deals with the background, development and description of a mathematical stock control methodology for use within an oil and chemical blending company, where demand and replenishment lead-times are generally non-stationary. The stock control model proper relies on, as input, adaptive forecasts of demand determined for an economical forecast/replenishment period precalculated on an individual stock-item basis. The control procedure is principally that of the continuous review, reorder level type, where the reorder level and reorder quantity 'float', that is, each changes in accordance with changes in demand. Two versions of the Methodology are presented; a cost minimisation version and a service level version. Realising the importance of demand forecasts, four recognised variations of the Trigg and Leach adaptive forecasting routine are examined. A fifth variation, developed, is proposed as part of the stock control methodology. The results of testing the cost minimisation version of the Methodology with historical data, by means of a computerised simulation, are presented together with a description of the simulation used. The performance of the Methodology is in addition compared favourably to a rule-of-thumb approach considered by the Company as an interim solution for reducing stack levels. The contribution of the work to the field of scientific stock control is felt to be significant for the following reasons:- (I) The Methodology is designed specifically for use with non-stationary demand and for this reason alone appears to be unique. (2) The Methodology is unique in its approach and the cost-minimisation version is shown to work successfully with the demand data presented. (3) The Methodology and the thesis as a whole fill an important gap between complex mathematical stock control theory and practical application. A brief description of a computerised order processing/stock monitoring system, designed and implemented as a pre-requisite for the Methodology's practical operation, is presented as an appendix.

A new inventory model for aircraft spares

A special inventory problem is presented: aircraft spares that are repaired and returned to spares, called rotable inventory. Rotable inventory is not consumed so does not change in the medium term, but is rotated through operational, maintenance and stock phases. The objective for inventory performance is fleet Service Level (SL), which effects aircraft dispatch performance. A model is proposed where the fleet SL drives combined stock levels such that cost is optimized. By holding greater numbers of lower-cost items and holding lower levels of more expensive items, it is possible to achieve substantial cost savings while maintaining performance. This approach is shown to be an advance over the current literature and is tested with case data, with conclusive results.

Exploring demand and production planning challenges in the food processing industry:a case study

This paper explores demand and production management challenges in the food processing industry. The goal is to identify the main production planning constraints and secondly to explore how each of these constraints affects company’s performance in terms of costs and customer service level. A single case study methodology was preferred since it enabled the collection of in-depth data. Findings suggest that product shelf life, carcass utilization and production lead time are the main constraints affecting supply chain efficiency and hence, a single planning approach is not appropriate when different products have different technological and processing characteristics.

A fuzzy AHP based integer linear programming model for the multi-criteria transshipment problem

Purpose – The purpose of this research is to develop a holistic approach to maximize the customer service level while minimizing the logistics cost by using an integrated multiple criteria decision making (MCDM) method for the contemporary transshipment problem. Unlike the prevalent optimization techniques, this paper proposes an integrated approach which considers both quantitative and qualitative factors in order to maximize the benefits of service deliverers and customers under uncertain environments. Design/methodology/approach – This paper proposes a fuzzy-based integer linear programming model, based on the existing literature and validated with an example case. The model integrates the developed fuzzy modification of the analytic hierarchy process (FAHP), and solves the multi-criteria transshipment problem. Findings – This paper provides several novel insights about how to transform a company from a cost-based model to a service-dominated model by using an integrated MCDM method. It suggests that the contemporary customer-driven supply chain remains and increases its competitiveness from two aspects: optimizing the cost and providing the best service simultaneously. Research limitations/implications – This research used one illustrative industry case to exemplify the developed method. Considering the generalization of the research findings and the complexity of the transshipment service network, more cases across multiple industries are necessary to further enhance the validity of the research output. Practical implications – The paper includes implications for the evaluation and selection of transshipment service suppliers, the construction of optimal transshipment network as well as managing the network. Originality/value – The major advantages of this generic approach are that both quantitative and qualitative factors under fuzzy environment are considered simultaneously and also the viewpoints of service deliverers and customers are focused. Therefore, it is believed that it is useful and applicable for the transshipment service network design.

Information and communication technology adoption in the Italian road freight haulage industry

Despite the importance of information and communication technology (ICT) in the management of transport and logistics systems, there is a shortage of studies in the road freight haulage sector. This paper is aimed at filling this void through an exploratory survey on ICT adoption and the influencing factors carried out in the Italian road transport market. The paper provides a review of the previous research on this topic that allows the identification of research gaps that have been addressed through a questionnaire survey. The findings provide evidence of a passive stance on ICT usage characterised by the adoption of isolated applications. The financial risk associated with technology investment and human resources are the main barriers to ICT adoption, while the improvement of service level and the reliability of transport operations emerge as stimulating factors. The results suggest that the potential benefits of technology have not been fully exploited and a risk-sensitive stance on ICT is evident preventing the full incorporation of ICT into business processes.

Cloud adoption:prioritizing obstacles and obstacles resolution tactics using AHP

The enormous potential of cloud computing for improved and cost-effective service has generated unprecedented interest in its adoption. However, a potential cloud user faces numerous risks regarding service requirements, cost implications of failure and uncertainty about cloud providers' ability to meet service level agreements. These risks hinder the adoption of cloud. We extend the work on goal-oriented requirements engineering (GORE) and obstacles for informing the adoption process. We argue that obstacles prioritisation and their resolution is core to mitigating risks in the adoption process. We propose a novel systematic method for prioritising obstacles and their resolution tactics using Analytical Hierarchy Process (AHP). We provide an example to demonstrate the applicability and effectiveness of the approach. To assess the AHP choice of the resolution tactics we support the method by stability and sensitivity analysis. Copyright 2014 ACM.

A lean elvek alkalmazása az egészségügyi folyamatok fejlesztésében = Applying lean principles in healthcare process development

A fejlett társadalmak egészségügyi szolgáltató rendszerei napjainkban kettős kihívással néznek szembe: miközben a társadalom a szolgáltatási színvonal emelkedését, a hibák számának a csökkenését várja el, addig a költségvetési terhek miatt a költségcsökkentés is feltétlenül szükséges. Ez a kihívás nagyságában összevethető azzal, amellyel az USA autóipara nézett szembe az 1970-es évektől. A megoldást az autóipar esetében a konkurens „lean” menedzsment elvek és eszközök megértése és alkalmazása jelentette. A tanulmány arra keresi a választ, hogy vajon lehetséges-e ennek a megoldásnak az alkalmazása az egészségügy esetében is. A cikk az egészségügy problémájának bemutatása után tárgyalja a lean menedzsment kialakulását és hogy milyen módon került köztudatba. A tanulmány második felében a szakirodalomban fellelhető, a témával kapcsolatos tapasztalatokat foglalja össze, majd levonja a következtetéseket. = In developed societies healthcare service systems are facing double challenge; society expects service level to rise and the number of mistakes to drop, but at the same time, because of the overloaded budgets, cutting cost is also absolutely necessary. This challenge compares to the one the US automotive industry was facing in the 1970-s. In case of the automotive industry the solution was the comprehension and application of the principles and the tools of lean management. This study aims to answer the question whether it is possible to apply this solution also in the case of the healthcare system. The article first introduces the problems in the healthcare system, than describes the formation of lean management concept and its wide spread. The second half of the study summarizes the available knowledge in the literature and drives conclusions.

Improving resource management in virtualized data centers using application performance models

The rapid growth of virtualized data centers and cloud hosting services is making the management of physical resources such as CPU, memory, and I/O bandwidth in data center servers increasingly important. Server management now involves dealing with multiple dissimilar applications with varying Service-Level-Agreements (SLAs) and multiple resource dimensions. The multiplicity and diversity of resources and applications are rendering administrative tasks more complex and challenging. This thesis aimed to develop a framework and techniques that would help substantially reduce data center management complexity.^ We specifically addressed two crucial data center operations. First, we precisely estimated capacity requirements of client virtual machines (VMs) while renting server space in cloud environment. Second, we proposed a systematic process to efficiently allocate physical resources to hosted VMs in a data center. To realize these dual objectives, accurately capturing the effects of resource allocations on application performance is vital. The benefits of accurate application performance modeling are multifold. Cloud users can size their VMs appropriately and pay only for the resources that they need; service providers can also offer a new charging model based on the VMs performance instead of their configured sizes. As a result, clients will pay exactly for the performance they are actually experiencing; on the other hand, administrators will be able to maximize their total revenue by utilizing application performance models and SLAs. ^ This thesis made the following contributions. First, we identified resource control parameters crucial for distributing physical resources and characterizing contention for virtualized applications in a shared hosting environment. Second, we explored several modeling techniques and confirmed the suitability of two machine learning tools, Artificial Neural Network and Support Vector Machine, to accurately model the performance of virtualized applications. Moreover, we suggested and evaluated modeling optimizations necessary to improve prediction accuracy when using these modeling tools. Third, we presented an approach to optimal VM sizing by employing the performance models we created. Finally, we proposed a revenue-driven resource allocation algorithm which maximizes the SLA-generated revenue for a data center.^

SLA-Based Guidelines for Database Transitioning

Component-based Software Engineering (CBSE) and Service-Oriented Architecture (SOA) became popular ways to develop software over the last years. During the life-cycle of a software system, several components and services can be developed, evolved and replaced. In production environments, the replacement of core components, such as databases, is often a risky and delicate operation, where several factors and stakeholders should be considered. Service Level Agreement (SLA), according to ITILv3’s official glossary, is “an agreement between an IT service provider and a customer. The agreement consists on a set of measurable constraints that a service provider must guarantee to its customers.”. In practical terms, SLA is a document that a service provider delivers to its consumers with minimum quality of service (QoS) metrics.This work is intended to assesses and improve the use of SLAs to guide the transitioning process of databases on production environments. In particular, in this work we propose SLA-Based Guidelines/Process to support migrations from a relational database management system (RDBMS) to a NoSQL one. Our study is validated by case studies.