Secure multiParty computation protocols

Dissertação de Mestrado em Engenharia Informática

Intermetallic layer formation and influence in solder joints reliability

Dissertação de mestrado integrado em Materials Engineering

Titanium oxide adhesion layer for high temperature annealed Si/Si3N4/TiOx/Pt/LiCoO2 battery structures

This work describes the influence of a high annealing temperature of about 700C on the Si(substrate)/Si3N4/TiOx/Pt/LiCoO2 multilayer system for the fabrication of all-solid-state lithium ion thin film microbatteries. Such microbatteries typically utilize lithium cobalt oxide (LiCoO2) as cathode material with a platinum (Pt) current collector. Silicon nitride (Si3N4) is used to act as a barrier against Li diffusion into the substrate. For a good adherence between Si3N4 and Pt, commonly titanium (Ti) is used as intermediate layer. However, to achieve crystalline LiCoO2 the multilayer system has to be annealed at high temperature. This post-treatment initiates Ti diffusion into the Pt-collector and an oxidation to TiOx, leading to volume expansion and adhesion failures. To solve this adhesion problem, we introduce titanium oxide (TiOx) as an adhesion layer, avoiding the diffusion during the annealing process. LiCoO2, Pt and Si3N4 layers were deposited by magnetron sputtering and the TiOx layer by thermal oxidation of Ti layers deposited by e-beam technique. Asdeposited and annealed multilayer systems using various TiOx layer thicknesses were studied by scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) and x-ray photoelectron spectroscopy (XPS). The results revealed that an annealing process at temperature of 700C leads to different interactions of Ti atoms between the layers, for various TiOx layer thicknesses (25–45 nm).

Flexible organic–inorganic hybrid layer encapsulation for organic opto-electronic devices

In this work we produce and study the flexible organic–inorganic hybrid moisture barrier layers for the protection of air sensitive organic opto-electronic devices. The inorganic amorphous silicon nitride layer (SiNx:H) and the organic PMMA [poly (methyl methacrylate)] layer are deposited alternatingly by using hot wire chemical vapor deposition (HW-CVD) and spin-coating techniques, respectively. The effect of organic–inorganic hybrid interfaces is analyzed for increasing number of interfaces. We produce highly transparent (∼80% in the visible region) hybrid structures. The morphological properties are analysed providing a good basis for understanding the variation of the water vapor transmission rate (WVTR) values. A minimum WVTR of 4.5 × 10−5g/m2day is reported at the ambient atmospheric conditions for 7 organic/inorganic interfaces. The hybrid barriers show superb mechanical flexibility which confirms their high potential for flexible applications.

Layer-by-layer technique to developing functional nanolaminate films with antifungal activity

The layer-by-layer (LbL) deposition method was used to build up alternating layers (five) of different polyelectrolyte solutions (alginate, zein-carvacrol nanocapsules, chitosan and chitosan-carvacrol emulsions) on an aminolysed/charged polyethylene terephthalate (A/C PET) film. These nanolaminated films were characterised by contact angle measurements and through the determination of water vapour (WVTR) and oxygen (O2TR) transmission rates. The effect of active nanolaminated films against the Alternaria sp. and Rhizopus stolonifer was also evaluated. This procedure allowed developing optically transparent nanolaminated films with tuneable water vapour and gas properties and antifungal activity. The water and oxygen transmission rate values for the multilayer films were lower than those previously reported for the neat alginate or chitosan films. The presence of carvacrol and zein nanocapsules significantly decreased the water transmission rate (up to 40 %) of the nanolaminated films. However, the O2TR behaved differently and was only improved (up to 45 %) when carvacrol was encapsulated, i.e. nanolaminated films prepared by alternating alginate with nanocapsules of zein-carvacrol layers showed better oxygen barrier properties than those prepared as an emulsion of chitosan and carvacrol. These films containing zein-carvacrol nanocapsules also showed the highest antifungal activity (30 %), which did not significantly differ from those obtained with the highest amount of carvacrol, probably due to the controlled release of the active agent (carvacrol) from the zein-carvacrol nanocapsules. Thus, this work shows that nanolaminated films prepared with alternating layers of alginate and zein-carvacrol nanocapsules can be considered to improve the shelf-life of foodstuffs.

Identification of Mycobacteria by Thin Layer Chromatographic Analysis of Mycolic Acids and Conventional Biochemical Method: Four Years of Experience

Mycolic acids analysis by thin-layer chromatography (TLC) has been employed by several laboratories worldwide as a method for fast identification of mycobacteria. This method was introduced in Brazil by our laboratory in 1992 as a routine identification technique. Up to the present, 861 strains isolated were identified by mycolic acids TLC and by standard biochemical tests; 61% out of these strains came as clinical samples, 4% isolated from frogs and 35% as environmental samples. Mycobacterium tuberculosis strains identified by classical methods were confirmed by their mycolic acids contents (I, III and IV). The method allowed earlier differentiation of M. avium complex - MAC (mycolic acids I, IV and VI) from M. simiae (acids I, II and IV), both with similar biochemical properties. The method also permitted to distinguish M. fortuitum (acids I and V) from M. chelonae (acids I and II) , and to detect mixed mycobacterial infections cases as M. tuberculosis with MAC and M. fortuitum with MAC. Concluding, four years experience shows that mycolic acids TLC is an easy, reliable, fast and inexpensive method, an important tool to put together conventional mycobacteria identification methods.

An approximate solution method for boundary layer flow of a power law fluid over a flat plate

The work in this paper deals with the development of momentum and thermal boundary layers when a power law fluid flows over a flat plate. At the plate we impose either constant temperature, constant flux or a Newton cooling condition. The problem is analysed using similarity solutions, integral momentum and energy equations and an approximation technique which is a form of the Heat Balance Integral Method. The fluid properties are assumed to be independent of temperature, hence the momentum equation uncouples from the thermal problem. We first derive the similarity equations for the velocity and present exact solutions for the case where the power law index n = 2. The similarity solutions are used to validate the new approximation method. This new technique is then applied to the thermal boundary layer, where a similarity solution can only be obtained for the case n = 1.

Intracortical connectivity of layer VI pyramidal cells in the barrel cortex of mice

ABSTRACT : The whisker-to-barrel pathway of rodents is formed by a series of somatotopic projections from the mystacial whisker follicles to the layer IV of the primary somatosensory cortex such that each follicle corresponds to a cluster of cortical neurons called barrel. Barrels are present in layer IV but form part of functional columns that comprise the entire depth of the somatosensory cortex. Interestingly, the cortex of the barrelless mouse strain (BRL) is organized such a manner that thalamocortical afferents do not remodel their projections in layer IV and barrels fail to appear. Nevertheless, functionally, a columnar organization persists, indicating that functional columns are not only provided by thalamocortical projections and layer IV cells. Since in the visual cortex of cats, layer VI cells contribute to the response properties of layer IV neurons, we wonder whether layer VI pyramidal cells could contribute to the columnar organization of the primary somatosensory cortex of mice. To address -this question, we morphologically analyzed the distribution of intracortical axon collaterals of layer VI neurons after in-vivo juxtacellular injections of biocytin in the C2 barrel column. Injected hemispheres were tangentially serial cut and intracortical collaterals of individual layer VI neurons were reconstructed at the light microscopic level. The position of axonal boutons was recorded to evaluate the distribution of presumed synaptic contacts. In normal (NOR) mice, cluster analysis shows that layer VI pyramidal cells can be classified in four statistically different clusters of neurons. Moreover, we assume that two classes are formed by cortico-cortical neurons and two classes are formed by cortico-thalamic neurons. Looking at the direction of the main axon in the white matter, we noticed that its orientation correlates perfectly with the type of neuron: cortico-cortical neurons send main axon medially whereas cortico-thalamic neurons send main axon laterally. Performing the same study in the BRL strain, we showed that the BRL mutation affects layer VI pyramidal cells tangentially and radially: the effects of the mutation are illustrated by a significant decrease of the index of colurnnarization and a significant decrease of percentage of boutons in granular and supragranular layers comparing to NOR neurons. In spite of these differences, the same four classes of layer VI neurons have been found in BRL mice. Using a tangential analysis of the boutons distribution, we showed that putative synapses are distributed mainly in the C2 barrel column. This was observed for each layer, type of neuron, cluster or strain, indicating that layer VI pyramidal cells could participate to the functional columnar organization of the barrel cortex. To determine post-synaptic partners of layer VI neurons in layer IV, we conducted an ultrastructural analysis of layer VI-to-IV contacts. We showed that synapses principally occur on spines and spiny dendritic shafts, supposed to belong to excitatory neurons. We furthermore showed that pre-synaptic elements are significantly different between en passant and terminaux contacts, which support hypothesis that terminaux boutons should show longer duration of facilitation than en passant boutons. RÉSUMÉ : Le «whisker-to-barrel pathway» des rongeurs est caractérisé par une série de projections somatotopiques depuis les follicules des moustaches ('whiskers') jusqu'à la couche IV de l'aire somatosensorielle primaire, de telle façon que chaque follicule corresponde à un groupe de neurones corticaux appelés tonneaux (`barrels'). Les tonneaux sont seulement présents en couche IV mais font partie de colonnes fonctionnelles qui s'étendent sur toute la profondeur du cortex somatosensoriel. Chez les souris mutantes barrelless (BRL), le cortex somatosensoriel est organisé de façon telle que lés afférences thalamocorticales ne remodellent pas leurs projections en couche IV et que les tonneaux n'apparaissent pas. Fonctionnellement, pourtant, une organisation en colonnes persiste, ce qui indique que les colonnes fonctionnelles ne sont pas uniquement produites par les projections thalamocorticales et par les cellules de la couche IV. Puisque les cellules de la couche VI contribuent à influencer les réponses des cellules de la couche IV dans le cortex visuel du chat, nous nous sommes demandé si ces cellules ne pourraient pas aussi contribuer à l'organisation en colonnes du cortex somatosensoriel primaire de la souris. Pour répondre à cette question, nous avons analysé de façon morphologique la distribution intracorticale des collatéraux axonaux de neurones de la couche VI. Suite à des injections juxtacellulaires de biocytine in-vivo dans la colonne C2, les hémisphères cérébraux ont été tangentiellement coupés en série et les collatéraux intracorticaux des neurones de la couche VI ont été reconstruits en microscopie optique. La position des boutons axonaux a aussi été enregistrée pour évaluer la distribution des contacts synpptiques potentiels. Chez les souris NOR, une analyse multivariée montre que les cellules pyramidales de la couche VI sont distribuées en quatre classes. Deux de ces classes sont probablement formées de neurons cortico-corticaux, alors que les deux autres sont probablement formées de neurones corticothalamiques. En observant la direction de l'axone principal dans la matière blanche, nous avons noté que son orientation est parfaitement corrélée avec le type supposé de neurone : les neurones corticocorticaux envoient leurs axones principaux médiallement, alors que les neurons cortico-thalamiques envoient leurs axones principaux latéralement. En menant la même étude chez les souris BRL, nous avons montré que la mutation affecte les cellules pyramidales de la couche VI de façon tangentielle, mais aussi radiaire : les effets de 1a mutation se traduisent par une diminution significative de l'index de « columnarization » et de la connectivité en couches granulaire et supragranulaire. Malgré ces différences, les quatre mêmes classes de neurones ont été retrouvées. En utilisant une analyse tangentielle de la distribution des boutons, nous avons montré que les synapses potentielles sont distribuées principalement dans la colonne C2. Cette observation a été faite dans chaque couche, chaque type de neurones, chaque classe de neurones et chaque souche de souris, indicant que les cellules de la couche VI participent certainement à l'organisation en colonne du cortex somatosensoriel. Pour déterminer les partenaires post-synaptiques des cellules de la couche VI en couche IV, nous avons conduit une analyse ultrastructurelle de ces contacts. Nous avons montré que les synapses interviennent principalement sur les épines et sur les dendrites supposés appartenir à des cellules excitatrices. Nous avons aussi montré que les éléments pré-synaptiques de ces synapses sont significativement differents selon le type de bouton, en passant ou terminal, ce qui supporte l'hypothèse que les boutons terminaux seraient capables d'une plus longue facilitation.

Forensic examination of ink by high-performance thin layer chromatography - The United States Secret Service Digital Ink Library

Forensic examinations of ink have been performed since the beginning of the 20th century. Since the 1960s, the International Ink Library, maintained by the United States Secret Service, has supported those analyses. Until 2009, the search and identification of inks were essentially performed manually. This paper describes the results of a project designed to improve ink samples' analytical and search processes. The project focused on the development of improved standardization procedures to ensure the best possible reproducibility between analyses run on different HPTLC plates. The successful implementation of this new calibration method enabled the development of mathematical algorithms and of a software package to complement the existing ink library.

Secure Care (PDF 301KB)

An Inspection of Secure Accommodation at Shamrock House and Linden House

Secure Care: An Inspection of Secure Accommodation at Shamrock House and Linden House (PDF 300 KB)

Secure Care: An Inspection of Secure Accommodation at Shamrock House and Linden House

Obtenció de capes primes d'alúmina mitjançant "Atomic Layer Deposition"

En aquest projecte s'ha estudiat la posada a punt d’un equip comercial ALD per a l’obtenció de capes primes d'alúmina a escala nanomètrica utilitzant vapor d’aigua i TMA com a precursors. Per tal de comprovar a bondat de les receptes experimentals aportades pel fabricant així com comprovar alguns aspectes de la teoria ALD s’han realitzat una sèrie de mostres variant els diferents paràmetres experimentals, principalment la temperatura de deposició, el nombre de cicles, la durada del cicle i el tipus de substrat. Per a la determinació dels gruixos nanomètrics de les capes i per tant dels ritmes de creixement s’ha utilitzat la el·lipsometria, una de les poques tècniques no destructives capaç de mesurar amb gran precisió gruixos de capes o interfases de pocs àngstroms o nanòmetres. En una primera etapa s'han utilitzat els valors experimentals donats pel fabricant del sistema ALD per determinar el ritme de creixement en funció de la temperatura de dipòsit i del numero de cicles, en ambdós casos sobre diversos substrats. S'ha demostrat que el ritme de creixement augmenta lleugerament en augmentar la temperatura de dipòsit, tot i que amb una variació petita, de l'ordre del 12% en variar 70ºC la temperatura de deposició. Així mateix s'ha demostrat la linealitat del gruix amb el número de cicles, tot i que no s’observa una proporcionalitat exacta. En una segona etapa s'han optimitzat els paràmetres experimentals, bàsicament els temps de purga entre pols i pols per tal de reduir considerablement les durades dels experiments realitzats a relativament baixes temperatures. En aquest cas s’ha comprovat que es mantenien els ritmes de creixement amb una diferencia del 3,6%, 4,8% i 5,5% en optimitzar el cicles en 6,65h, 8,31h, o 8,33h, respectivament. A més, per una d'aquestes condicions s’ha demostrat que es mantenia l’alta conformitat de les capes d’alúmina. A més, s'ha realitzat un estudi de l'homogeneïtat del gruix de les capes en tota la zona de dipòsit del reactor ALD. S’ha demostrat que la variació en gruix de les capes dipositades a 120ºC és com a màxim del 6,2% en una superfície de 110 cm2. Confirmant l’excepcional control de gruixos de la tècnica ALD.

ARCHITECTING USER-CENTRIC PRIVACY-AS-A-SET-OF-SERVICES: DIGITAL IDENTITY RELATED PRIVACY FRAMEWORK

AbstractDigitalization gives to the Internet the power by allowing several virtual representations of reality, including that of identity. We leave an increasingly digital footprint in cyberspace and this situation puts our identity at high risks. Privacy is a right and fundamental social value that could play a key role as a medium to secure digital identities. Identity functionality is increasingly delivered as sets of services, rather than monolithic applications. So, an identity layer in which identity and privacy management services are loosely coupled, publicly hosted and available to on-demand calls could be more realistic and an acceptable situation. Identity and privacy should be interoperable and distributed through the adoption of service-orientation and implementation based on open standards (technical interoperability). Ihe objective of this project is to provide a way to implement interoperable user-centric digital identity-related privacy to respond to the need of distributed nature of federated identity systems. It is recognized that technical initiatives, emerging standards and protocols are not enough to guarantee resolution for the concerns surrounding a multi-facets and complex issue of identity and privacy. For this reason they should be apprehended within a global perspective through an integrated and a multidisciplinary approach. The approach dictates that privacy law, policies, regulations and technologies are to be crafted together from the start, rather than attaching it to digital identity after the fact. Thus, we draw Digital Identity-Related Privacy (DigldeRP) requirements from global, domestic and business-specific privacy policies. The requirements take shape of business interoperability. We suggest a layered implementation framework (DigldeRP framework) in accordance to model-driven architecture (MDA) approach that would help organizations' security team to turn business interoperability into technical interoperability in the form of a set of services that could accommodate Service-Oriented Architecture (SOA): Privacy-as-a-set-of- services (PaaSS) system. DigldeRP Framework will serve as a basis for vital understanding between business management and technical managers on digital identity related privacy initiatives. The layered DigldeRP framework presents five practical layers as an ordered sequence as a basis of DigldeRP project roadmap, however, in practice, there is an iterative process to assure that each layer supports effectively and enforces requirements of the adjacent ones. Each layer is composed by a set of blocks, which determine a roadmap that security team could follow to successfully implement PaaSS. Several blocks' descriptions are based on OMG SoaML modeling language and BPMN processes description. We identified, designed and implemented seven services that form PaaSS and described their consumption. PaaSS Java QEE project), WSDL, and XSD codes are given and explained.

Implementació d'un esquema criptogràficper gestionar de forma segura els historialsmèdics dels pacients a través d'una xarxade comunicacions.

En el PFC implementarem en Java una aplicació per gestionar historials mèdics de manerasegura. Està desenvolupada seguint el model de capa de dades, capa de negoci i capa depresentació i el resultat són tres parts que anomenarem ¿part del gestor¿, ¿part del pacient¿ i ¿part del metge¿.