Application of scalar dissipation rate model to siemens DLE combustors

The standard design process for the Siemens Industrial Turbomachinery, Lincoln, Dry Low Emissions combustion systems has adopted the Eddy Dissipation Model with Finite Rate Chemistry for reacting computational fluid dynamics simulations. The major drawbacks of this model have been the over-prediction of temperature and lack of species data limiting the applicability of the model. A novel combustion model referred to as the Scalar Dissipation Rate Model has been developed recently based on a flamelet type assumption. Previous attempts to adopt the flamelet philosophy with alternative closure models have failed, with the prediction of unphysical phenomenon. The Scalar Dissipation Rate Model (SDRM) was developed from a physical understanding of scalar dissipation rate, signifying the rate of mixing of hot and cold fluids at scales relevant to sustain combustion, in flames and was validated using direct numerical simulations data and experimental measurements. This paper reports on the first industrial application of the SDRM to SITL DLE combustion system. Previous applications have considered ideally premixed laboratory scale flames. The industrial application differs significantly in the complexity of the geometry, unmixedness and operating pressures. The model was implemented into ANSYS-CFX using their inbuilt command language. Simulations were run transiently using Scale Adaptive Simulation turbulence model, which switches between Large Eddy Simulation and Unsteady Reynolds Averaged Navier Stokes using a blending function. The model was validated in a research SITL DLE combustion system prior to being applied to the actual industrial geometry at real operating conditions. This system consists of the SGT-100 burner with a glass square-sectioned combustor allowing for detailed diagnostics. This paper shows the successful validation of the SDRM against time averaged temperature and velocity within measurement errors. The successful validation allowed application of the SDRM to the SGT-100 twin shaft at the relevant full load conditions. Limited validation data was available due to the complexity of measurement in the real geometry. Comparison of surface temperatures and combustor exit temperature profiles showed an improvement compared to EDM/FRC model. Furthermore, no unphysical phenomena were predicted. This paper presents the successful application of the SDRM to the industrial combustion system. The model shows a marked improvement in the prediction of temperature over the EDM/FRC model previously used. This is of significant importance in the future applications of combustion CFD for understanding of hardware mechanical integrity, combustion emissions and dynamics of the flame. Copyright © 2012 by ASME.

支持多策略的安全数据库系统体系结构

提出了在DBMS中支持多种安全策略的需求,指出了在DBMS中支持多安全策略所面临的主要问题,针对这些问题提出了支持多安全策略的DBMS体系结构(MSDA).在抽象层次上该体系结构与GFAC一致,主要区别表现在性能优化和面向DBMS的适应性改造.为了提高系统性能,MSDA在客体管理器中引入了访问判定缓存.而为了适用于DBMS,MSDA在体系结构层次引入了重写来支持高效的细粒度访问控制.此外还引入了访问上下文栈来支持视图和存储过程这类的受控访问机制.给出了MSDA在LOIS SDBMS v3.0中的实现,并通过实验给出了MSDA对目标系统的性能影响分析.结果表明,MSDA将访问控制判定与实施分离,既能充分解决数据库系统中支持多安全策略的相关问题,同时能够与当前主流关系数据库系统相匹配,不会造成目标系统性能的显著下降.

移动分布式环境下服务适配系统研究

移动环境给分布式资源共享特别是服务发现和资源定位带来了新的挑战。本文分析了移动性给服务发现和资源定位机制带来的特殊性,介绍了具有服务主动适配能力的服务适配原型系统Service Catalog Net,给出了其中的关键技术:适应移动性需求的支持多样性的服务模型、服务主动适配策略以及基于模糊匹配的服务定位机制。

网格环境下的数据库系统

目前网格上的各类应用系统几乎郝是使用文件来保存数据，因此人们对如何将数据库系统集成入网格这个问题研完甚少。如果网格要在将来支持更大范围的应用系统，那么必须要解决将数据库系统集成入网格这个问题。本文在分析网格环境对数据库系统的需求的基础上，总结了将数据库系统集成入网格的两种方法，并分别对它们做出评价。

一种支持动态调节的最小特权安全策略架构

最小特权机制可为安全操作系统提供恰当的安全保证级.本文描述了一种支持动态调节的最小特权安全策略架构,它结合角色的职责隔离和域的功能隔离特性,通过一种基于进程上下文一角色、执行域和运行映像的权能控制机制,将每个进程始终约束在这些上下文允许的最小特权范围内.本文实例分析了该架构在安胜OS v4.0,一种自主开发的、符合GB17859-1999第四级--结构化保护级的安全操作系统中的实现.结果表明,它可支持安全操作系统实施动态调节的最小特权控制,并提供灵活有效的系统.

基于LSM框架的审计系统的设计与实现

LSM是Linux系统的通用访问控制框架,在安胜安全操作系统V4.0中,我们在这一访问控制框架的基础上做了适当的扩展并设计实现了安全审计系统.该安全审计系统与安胜安全操作系统V2.0的审计系统相比,性能得到了很大的提高.另外,隐蔽通道会绕过系统的安全策略来进行非法的数据流传输,我们在审计系统中进行了实时检测和报警.

安全操作系统中基于安全性损害分析的可信恢复

安全操作系统可能因为内部或外部的原因发生失效或中断，进而导致其安全性损害。本文首先描述了一个通用的安全模型，然后扩展此模型以描述安全操作系统中的安全性损害，并提出依据安全策略从安全审计日志中分析计算安全性损害的方法，最后给出了安全性损害相应的可信恢复算法。在消极的安全防御外，本文的研究主动保证安全操作系统的安全性，增强了安全操作系统的可靠性和可恢复性。

改进增强型高安全等级操作系统SECIMOS的设计与实现

本文介绍了以Linux系统为基础,通过改进/增强法来开发高安全等级操作系统SECIMOS,给出了系统的实现框架,全面论述了其中的核心技术,如访问控制、追责机制、保证方法等。分析了改进/增强法存在的问题,指出应探讨更适合今后开发最高安全等级操作系统的方法。

使用CC标准开发的高保证安全信息系统

通用标准（Common Criteria）提供了衡量系统安全性的流行准则。本文主要提出通过各类保证措施，如何构建符合CC标准的高保证安全信息系统。文中首先给出了CC的评估模型、评估过程和安全保证的具体要求。然后以开发安全审计系统为例，分析了系统安全功能和保证要求的产生、审计系统的实现框架以及为达到标准要求而在系统开发过程中使用的各种保证证据和保证措施。最后，又分析了审计系统对整个系统的性能影响因素，并提出了改进办法。本文通过深入剖析通用标准中各个保证要求的内涵，为开发具有高保证要求的信息系统提供了理论指导和实现方法。

A conceptual approach to integrated coastal management

This paper focuses on the concept of Integrated Coastal Management (ICM) putting the theoretical basis of Chapter 17, Agenda 21 (UN Conference on Environment and Development, UNCED), in relation to the theoretical backgrounds on which the development of coastal area programmes have been founded. Reasoning leads us to think that the general system theory is the proper conceptual basis to stimulate ICM and that, in this theoretical context, integration is to be pursued between (i) the claiming of national maritime jurisdictional belts and the protection of the coastal ecosystem, (ii) the coastal system and its external environment, (iii) the decision making systems acting at all levels (international, regional, national and local). Integration, therefore, should be thought of as a political process.

避免误操作的遥协作模糊控制方法

现有的遥操作系统中普遍存在的问题是受环境、心理、生理等影响,操作者在遥操作机器人过程中可能由于误操作产生不可预料的后果.为了解决操作者误操作问题,提出对基于操作者通过选择操作手法得到的模糊操作量和对基于多传感器融合决策产生的模糊控制量采取加权和的遥协作模糊控制方法.以遥操作机械手臂为例,通过单纯由操作者、单纯由多传感器融合决策和遥协作模糊控制3种方法进行实验,验证所提出方法的合理性.

基于超短基线/多普勒的水下机器人位置估计

为解决深海复杂环境下采用水声定位系统实现水下机器人位置控制所带来的反馈信号延迟问题 ,提出了基于 USBL/Doppler的水下机器人位置估计算法 .文中首先根据导航系统确定卡尔曼滤波器结构并建立了系统的状态方程和观测方程 ,同时 ,为了提高估计精度 ,引入自适应卡尔曼滤波理论 ,以降低系统对环境和初始噪声估计精度的敏感性 .最后通过数字仿真验证了算法的有效性 ,并给出了结论

Medicação Intracanalar em Endodontia

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Camera-Based Interfaces and Assistive Software for People with Sever Motion Impairments

Intelligent assistive technology can greatly improve the daily lives of people with severe paralysis, who have limited communication abilities. People with motion impairments often prefer camera-based communication interfaces, because these are customizable, comfortable, and do not require user-borne accessories that could draw attention to their disability. We present an overview of assistive software that we specifically designed for camera-based interfaces such as the Camera Mouse, which serves as a mouse-replacement input system. The applications include software for text-entry, web browsing, image editing, animation, and music therapy. Using this software, people with severe motion impairments can communicate with friends and family and have a medium to explore their creativity.

On the Interaction between TCP and the Wireless Channel in CDMA2000 Networks

In this work, we conducted extensive active measurements on a large nationwide CDMA2000 1xRTT network in order to characterize the impact of both the Radio Link Protocol and more importantly, the wireless scheduler, on TCP. Our measurements include standard TCP/UDP logs, as well as detailed RF layer statistics that allow observability into RF dynamics. With the help of a robust correlation measure, normalized mutual information, we were able to quantify the impact of these two RF factors on TCP performance metrics such as the round trip time, packet loss rate, instantaneous throughput etc. We show that the variable channel rate has the larger impact on TCP behavior when compared to the Radio Link Protocol. Furthermore, we expose and rank the factors that influence the assigned channel rate itself and in particular, demonstrate the sensitivity of the wireless scheduler to the data sending rate. Thus, TCP is adapting its rate to match the available network capacity, while the rate allocated by the wireless scheduler is influenced by the sender's behavior. Such a system is best described as a closed loop system with two feedback controllers, the TCP controller and the wireless scheduler, each one affecting the other's decisions. In this work, we take the first steps in characterizing such a system in a realistic environment.