Incorporating waiting time in competitive location models: Formulations and heuristics

In this paper we propose a metaheuristic to solve a new version of the Maximum CaptureProblem. In the original MCP, market capture is obtained by lower traveling distances or lowertraveling time, in this new version not only the traveling time but also the waiting time willaffect the market share. This problem is hard to solve using standard optimization techniques.Metaheuristics are shown to offer accurate results within acceptable computing times.

Location models for ceding market share and shrinking services

New location models are presented here for exploring the reduction of facilities in aregion. The first of these models considers firms ceding market share to competitorsunder situations of financial exigency. The goal of this model is to cede the leastmarket share, i.e., retain as much of the customer base as possible while sheddingcostly outlets. The second model considers a firm essentially without competition thatmust shrink it services for economic reasons. This firm is assumed to close outlets sothat the degradation of service is limited. An example is offered within a competitiveenvironment to demonstrate the usefulness of this modeling approach.

Location models for airline hubs behaving as M/D/c queues

Models are presented for the optimal location of hubs in airline networks, that take into consideration the congestion effects. Hubs, which are the most congested airports, are modeled as M/D/c queuing systems, that is, Poisson arrivals, deterministic service time, and {\em c} servers. A formula is derived for the probability of a number of customers in the system, which is later used to propose a probabilistic constraint. This constraint limits the probability of {\em b} airplanes in queue, to be lesser than a value $\alpha$. Due to the computational complexity of the formulation. The model is solved using a meta-heuristic based on tabu search. Computational experience is presented.

Hierarchical location-allocation models for congested systems

In this paper we address the issue of locating hierarchical facilities in the presence of congestion. Two hierarchical models are presented, where lower level servers attend requests first, and then, some of the served customers are referred to higher level servers. In the first model, the objective is to find the minimum number of servers and theirlocations that will cover a given region with a distance or time standard. The second model is cast as a Maximal Covering Location formulation. A heuristic procedure is then presented together with computational experience. Finally, some extensions of these models that address other types of spatial configurations are offered.

Location of multiple server common service centers or public facilities for minimizing general congestion and travel cost functions

We propose a model and solution methods, for locating a fixed number ofmultiple-server, congestible common service centers or congestible publicfacilities. Locations are chosen so to minimize consumers congestion (orqueuing) and travel costs, considering that all the demand must be served.Customers choose the facilities to which they travel in order to receiveservice at minimum travel and congestion cost. As a proxy for thiscriterion, total travel and waiting costs are minimized. The travel costis a general function of the origin and destination of the demand, whilethe congestion cost is a general function of the number of customers inqueue at the facilities.

The geophysical electromagnetic prospecting in the spatial location of the travertine deposits of the Banyoles Depression (Girona)

The results of the application of the geophysical electromagnetic prospection methods in the resolution of the problems of the spatial location of the travertine quaternary formations of the Banyoles depression are presented

Do Agglomeration Economies Reduce the Sensitivity of Firm Location to Tax Differentials?

Recent theoretical work in economic geography has shown that agglomeration forces can mitigate 'race-to-the-bottom' tax competition, by partly or fully offsetting firms' sensitivity to tax differentials. We test this proposition using data on firm births across Swiss municipalities. We find that corporate taxes deter firm births less in more spatially concentrated sectors. Firms in sectors with an agglomeration intensity in the top quintile are less than half as responsive to differences in corporate tax burdens as firms in sectors with an agglomeration intensity in the bottom quintile. Hence, agglomeration economies do appear to attenuate the impact of tax differentials on firms' location choices.

Office of Location and Environment Manual, August 2009

This manual captures the experience of practitioners in the Iowa Department of Transportation’s (Iowa DOT’s) Office of Location and Environment (OLE). It also documents the need for coordinated project development efforts during the highway project planning, or location study phase and engineering design. The location study phase establishes: * The definition of, and need for, the highway improvement project * The range of alternatives and many key attributes of the project’s design * The recommended alternative, its impacts, and the agreed-to conditions for project approval The location study process involves developing engineering alternatives, collecting engineering and environmental data, and completing design refinements to accomplish functional designs. The items above also embody the basic content required for projects compliant with the National Environmental Policy Act (NEPA) of 19691, which directs federal agencies to use a systematic, interdisciplinary approach during the planning process whenever proposed actions (or “projects”) have the potential for environmental impacts. In doing so, NEPA requires coordination with stakeholders, review, comment, and public disclosure. Are location studies and environmental studies more about the process or the documents? If properly conducted, they concern both—unbiased and reasonable processes with quality and timely documents. In essence, every project is a story that needs to be told. Engineering and environmental regulations and guidance, as documented in this manual, will help project staff and managers become better storytellers.

Accurate memory for object location by individuals with intellectual disability: Absolute spatial tagging instead of configural processing?

Using head-mounted eye tracker material, we assessed spatial recognition abilities (e.g., reaction to object permutation, removal or replacement with a new object) in participants with intellectual disabilities. The "Intellectual Disabilities (ID)" group (n=40) obtained a score totalling a 93.7% success rate, whereas the "Normal Control" group (n=40) scored 55.6% and took longer to fix their attention on the displaced object. The participants with an intellectual disability thus had a more accurate perception of spatial changes than controls. Interestingly, the ID participants were more reactive to object displacement than to removal of the object. In the specific test of novelty detection, however, the scores were similar, the two groups approaching 100% detection. Analysis of the strategies expressed by the ID group revealed that they engaged in more systematic object checking and were more sensitive than the control group to changes in the structure of the environment. Indeed, during the familiarisation phase, the "ID" group explored the collection of objects more slowly, and fixed their gaze for a longer time upon a significantly lower number of fixation points during visual sweeping.

Are 10 min of seating enough to guarantee stable haemoglobin and haematocrit readings for the athlete's biological passport?

Haemoglobin (Hb) and haematocrit (Hct) are measured as indirect markers of doping in athletes. We studied the effect of posture on these parameters in a typical antidoping setting. Venous blood samples were obtained from nine endurance athletes (six males, three females) and nine control subjects (six males, three females) immediately and after 5, 10, 15, 20 and 30 min after having adopted a seated position from normal daily activity. Hb (CV 0.72%) and Hct (CV 0.87%) were determined using an automated cell counter, plasma volume changes were calculated. Differences between the time points, gender and groups were calculated using a mixed-model procedure. Significant changes were observed in the first 10 min after sitting down but no further changes were noted between 10 and 30 min. Mean directional change for Hb and Hct between 0 min and the average of the period from 10 to 30 min was -2.4% (-0.35 g/dl) for Hb and -2.7% (-1.2%) for Hct. Plasma volume increased accordingly. Neither group nor gender had significant effects. Under typical conditions encountered during blood testing in doping control, a period of 10 min in a seated position is sufficient for the vascular volumes to re-equilibrate and to adapt to the new posture.

The mechanisms of agglomeration: Evidence from the effect of inter-industry relations on the location of new firms

The objective of this paper is to explore the relative importance of each of Marshall's agglomeration mechanisms by examining the location of new manufacturing firms in Spain. In particular, we estimate the count of new firms by industry and location as a function of (pre-determined) local employment levels in industries that: 1) use similar workers (labor market pooling); 2) have a customer- supplier relationship (input sharing); and 3) use similar technologies (knowledge spillovers). We examine the variation in the creation of new firms across cities and across municipalities within large cities to shed light on the geographical scope of each of the three agglomeration mechanisms. We find evidence of all three agglomeration mechanisms, although their incidence differs depending on the geographical scale of the analysis.

Timing, location and crop species influence the magnitude of amelioration of aluminum toxicity by magnesium

The protective effect of cations, especially Ca and Mg, against aluminum (Al) rhizotoxicity has been extensively investigated in the last decades. The mechanisms by which the process occurs are however only beginning to be elucidated. Six experiments were carried out here to characterize the protective effect of Mg application in relation to timing, location and crop specificity: Experiment 1 - Protective effect of Mg compared to Ca; Experiment 2 - Protective effect of Mg on distinct root classes of 15 soybean genotypes; Experiment 3 - Effect of timing of Mg supply on the response of soybean cvs. to Al; Experiment 4 - Investigating whether the Mg protective effect is apoplastic or simplastic using a split-root system; Experiment 5 - Protective effect of Mg supplied in solution or foliar spraying, and Experiment 6 - Protective effect of Mg on Al rhizotoxicity in other crops. It was found that the addition of 50 mmol L-1 Mg to solutions containing toxic Al increased Al tolerance in 15 soybean cultivars. This caused soybean cultivars known as Al-sensitive to behave as if they were tolerant. The protective action of Mg seems to require constant Mg supply in the external medium. Supplying Mg up to 6 h after root exposition to Al was sufficient to maintain normal soybean root growth, but root growth was not recovered by Mg addition 12 h after Al treatments. Mg application to half of the root system not exposed to Al was not sufficient to prevent Al toxicity on the other half exposed to Al without Mg in rooting medium, indicating the existence of an external protection mechanism of Mg. Foliar spraying with Mg also failed to decrease Al toxicity, indicating a possible apoplastic role of Mg. The protective effect of Mg appeared to be soybean-specific since Mg supply did not substantially improve root elongation in sorghum, wheat, corn, cotton, rice, or snap bean when grown in the presence of toxic Al concentrations.

Tax differentials and agglomeration economies in intraregional firm location

This paper analyses empirically how differences in local taxes affect the intraregional location of new manufacturing plants. These effects are examined within the random profit maximization framework while accounting for the presence of different types of agglomeration economies (localization/ urbanization/ Jacobs¿ economies) at the municipal level. We look at the location decision of more than 10,000 establishments locating between 1996 and 2003 across more than 400 municipalities in Catalonia, a Spanish region. It is necessary to restrict the choice set to the local labor market and, above all, to control for agglomeration economies so as to identify the effects of taxes on the location of new establishments.

Tax differentials and agglomeration economies in intraregional firm location

This paper analyses empirically how differences in local taxes affect the intraregional location of new manufacturing plants. These effects are examined within the random profit maximization framework while accounting for the presence of different types of agglomeration economies (localization/ urbanization/ Jacobs¿ economies) at the municipal level. We look at the location decision of more than 10,000 establishments locating between 1996 and 2003 across more than 400 municipalities in Catalonia, a Spanish region. It is necessary to restrict the choice set to the local labor market and, above all, to control for agglomeration economies so as to identify the effects of taxes on the location of new establishments.