A review of cataract in stable and conflict zones in Africa

Aim. To review and explore cataract prevalence in stable and unstable countries by examining published and unpublished ocular literature about Africa from 1980 onwards.^ Methods. Searches using OVID, Proquest Dissertations, WHO, and Ebsco Host were done. The review was restricted to articles utilizing WHO definitions of blindness and low vision. Random cluster sampling technique with a minimum sample size of 1,500, and reporting causes of blindness categorized by age and gender were inclusion considerations in the selected articles. ^ Results. Blindness and low vision increased with conflict. Women and the elderly were more likely to have vision impairing cataract. Cataract was the leading cause of blindness; the prevalence range was 22%–81% for the reviewed nations.^ Conclusion. Instability was connected to higher cataract prevalence and worse visual outcome across all characteristics examined except cataract surgical rates. ^

Mesozooplankton investigations in Bornholm Basin, Baltic Sea

Mesozooplankton production was estimated by using a new sampling technique and two alternative calculation methods. In essence, production estimates are based on significantly higher abundances. The contribution of juvenile stages to copepod and fish dynamics was generally low, so that the omission of juvenile stages in budgets will result in a small error. The situations reported in this study present a unique food web szenario, which in detail, however, was strongly dependent on methodology. Furthermore relations between trophic levels were considered with respect to vertical distribution.

Stable isotope ratios in shells of marine organisms

Oxygen and carbon isotope analyses have been carried out on calcareous skeletons of important recent groups of organisms. Annual temperature ranges and distinct developmental stages can be reconstructed from single shells with the aid of the micro-sampling technique made possible by modern mass-spectrometers. This is in contrast to the results of earlier studies which used bulk sampIes. The skeletons analysed are from Bermuda, the Philippines, the Persian Gulf and the continental margin off Peru. In these environments, seasonal salinity ranges and thus annual variations in the isotopic composition of the water are small. In addition, environmental parameters are weIl documented in these areas. The recognition of seasonal isotopic variations is dependant on the type of calcification. Shells built up by carbonate deposition at the margin, such as molluscs, are suitable for isotopic studies. Analysis is more difficult where chambers are added at the margin of the shell but where older chambers are simultaneously covered by a thin veneer of carbonate e. g. in rotaliid foraminifera. Organisms such as calcareous algae or echinoderms that thicken existing calcareous parts as weIl as growing in length and breadth are the most difficult to analyse. All organisms analysed show temperature related oxygen-isotope fractionation. The most recent groups fractionate oxygen isotopes in accordance with established d18O temperature relationships (Tab. 18, Fig. 42). These groups are deep-sea foraminifera, planktonic foraminifera, serpulids, brachiopods, bryozoa, almost all molluscs, sea urchins, and fish (otoliths). A second group of organisms including the calcareous algae Padina, Acetabularia, and Penicillus, as weIl as barnacles, cause enrichment of the heavy isotope 18O. Finally, the calcareous algae Amphiroa, Cymopolia and Halimeda, the larger foraminifera, corals, starfish, and holothurians cause enrichment of the lighter isotope 16O. Organisms causing non-equilibrium fractionation also record seasonal temperature variations within their skeletons which are reflected in stable-oxygen-isotope patterns. With the exception of the green algae Halimeda and Penicillus, all organisms analysed show lower d13C values than calculated equilibrium values (Tab. 18, Fig. 42). Especially enriched with the lighter isotope 12C are animals such as hermatypic corals and larger foraminifera which exist in symbiosis with other organisms, but also ahermatypic corals, starfish, and holothurians. With increasing age of the organisms, seven different d13C trends were observed within the skeletons. 1) No d13C variations are observed in deep-sea foraminifera presumably due to relatively stable environmental conditions. 2) Lower d13C values occur in miliolid larger foraminifera and are possibly related to increased growth with increasing age of the foraminifera. 3) Higher values are found in planktonic foraminifera and rotaliid larger foraminifera and can be explained by a slowing down of growth with increasing age. 4) A sudden change to lower d13C values at a distinct shell size occurs in molluscs and is possibly caused by the first reproductive event. 5) A low-high-Iow cycle in calcareous algae is possibly caused by variations in the stage of calcification or growth. 6) A positive correlation between d18O and d13C values is found in some hermatypic corals, all ahermatypic corals, in the septa of Nautilus and in the otoliths of fish. In hermatypic corals from tropical areas, this correlation is the result of the inverse relationship between temperature and light caused by summer cloud cover; in other groups it is inferred to be due to metabolic processes. 7) A negative correlation between d18O and d13C values found in hermatypic corals from the subtropics is explained by the sympathetic relationship between temperature and light in these latitudes. These trends show that the carbon isotope fractionation is controlled by the biology of the respective carbonate producing organisms. Thus, the carbon isotope distribution can provide information on the symbiont-host relationship, on metabolic processes and calcification and growth stages during ontogenesis of calcareous marine organisms.

(Table 1) Magnetic properties of specimens from DSDP Hole 68-503A

Measurements were made of the magnetic properties of 13 sediment samples from cores spanning the entire depth of Hole 503A. The principal aim was to make a preliminary assessment of the magnetic fabric of material obtained from hydraulic piston coring (HPC) which, though considerably bioturbated, might retain substantial traces of any depositional alignment of magnetic grains. Earlier measurements on Deep Sea Drilling Project cores (Rees, 1971; Rees and Frederick, 1974; Hailwood and Sayre, 1979) suggested that the improved HPC sampling technique should, other things being equal, provide good magnetic fabric information. The Hole 503A sediments were known from shipboard measurements to possess comparatively strong stable remanence and therefore seemed likely subjects for this assessment.

Chemical characterization of dissolved organic compounds from coastal sea surface microlayers (Baltic Sea, Germany)

The physicochemical properties of the sea surface microlayer (SML), i.e. the boundary layer between the air and the sea, and its impact on air-sea exchange processes have been investigated for decades. However, a detailed description about these processes remains incomplete. In order to obtain a better chemical characterization of the SML, in a case study three pairs of SML and corresponding bulk water samples were taken in the southern Baltic Sea. The samples were analyzed for dissolved organic carbon and dissolved total nitrogen, as well as for several organic nitrogen containing compounds and carbohydrates, namely aliphatic amines, dissolved free amino acids, dissolved free monosaccharides, sugar alcohols, and monosaccharide anhydrates. Therefore, reasonable analytical procedures with respect to desalting and enrichment were established. All aliphatic amines and the majority of the investigated amino acids (11 out of 18) were found in the samples with average concentrations between 53 ng/l and 1574 ng/l. The concentrations of carbohydrates were slightly higher, averaging 2900 ng/l. Calculation of the enrichment factor (EF) between the sea surface microlayer and the bulk water showed that dissolved total nitrogen was more enriched (EF: 1.1 and 1.2) in the SML than dissolved organic carbon (EF: 1.0 and 1.1). The nitrogen containing organic compounds were generally found to be enriched in the SML (EF: 1.9-9.2), whereas dissolved carbohydrates were not enriched or even depleted (EF: 0.7-1.2). Although the investigated compounds contributed on average only 0.3% to the dissolved organic carbon and 0.4% to the total dissolved nitrogen fraction, these results underline the importance of single compound analysis to determine SML structure, function, and its potential for a transfer of compounds into the atmosphere.

Application of a Bayesian/Generalised Least-Squares method to generate correlations between independent neutron fission yield data

Fission product yields are fundamental parameters for several nuclear engineering calculations and in particular for burn-up/activation problems. The impact of their uncertainties was widely studied in the past and valuations were released, although still incomplete. Recently, the nuclear community expressed the need for full fission yield covariance matrices to produce inventory calculation results that take into account the complete uncertainty data. In this work, we studied and applied a Bayesian/generalised least-squares method for covariance generation, and compared the generated uncertainties to the original data stored in the JEFF-3.1.2 library. Then, we focused on the effect of fission yield covariance information on fission pulse decay heat results for thermal fission of 235U. Calculations were carried out using different codes (ACAB and ALEPH-2) after introducing the new covariance values. Results were compared with those obtained with the uncertainty data currently provided by the library. The uncertainty quantification was performed with the Monte Carlo sampling technique. Indeed, correlations between fission yields strongly affect the statistics of decay heat. Introduction Nowadays, any engineering calculation performed in the nuclear field should be accompanied by an uncertainty analysis. In such an analysis, different sources of uncertainties are taken into account. Works such as those performed under the UAM project (Ivanov, et al., 2013) treat nuclear data as a source of uncertainty, in particular cross-section data for which uncertainties given in the form of covariance matrices are already provided in the major nuclear data libraries. Meanwhile, fission yield uncertainties were often neglected or treated shallowly, because their effects were considered of second order compared to cross-sections (Garcia-Herranz, et al., 2010). However, the Working Party on International Nuclear Data Evaluation Co-operation (WPEC)

Modelo del sistema de gestión de la calidad y el desempeño organizacional en la producción de petróleo

El proceso de cambio de una sociedad industrial a una sociedad del conocimiento, que experimenta el mundo globalizado en el siglo XXI, induce a las empresas y organizaciones a desarrollar ventajas competitivas y sostenibles basadas en sus activos intangibles, entre los cuales destacan los sistemas de gestión en general y los sistemas de gestión de la calidad (SGC) en particular. Las organizaciones dedicadas a la producción de petróleo están influenciadas por dicha tendencia. El petróleo es un recurso natural con reservas limitadas, cuya producción y consumo ha crecido progresivamente, aportando la mayor cuota (35 %) del total de la energía que se consume en el mundo contemporáneo, aporte que se mantendrá hasta el año 2035, según las previsiones más conservadoras. Por tanto, se hace necesario desarrollar modelos de producción innovadores, que contribuyan a la mejora del factor de recobro de los yacimientos y de la vida útil de los mismos, al tiempo que satisfagan los requerimientos de producción y consumo diarios de los exigentes mercados globales. El objeto de esta investigación es el desarrollo de un modelo de gestión de la calidad y su efecto en el desempeño organizacional, a través del efecto mediador de los constructos satisfacción del cliente interno y gestión del conocimiento en la producción de petróleo. Esta investigación de carácter explicativo, no experimental, transeccional y ex-postfacto, se realizó en la región petrolífera del lago de Maracaibo, al occidente de Venezuela, la cual tiene más de 70 años en producción y cuenta con yacimientos maduros. La población objeto de estudio fue de 369 trabajadores petroleros, quienes participaron en las mesas técnicas de la calidad, durante los meses de mayo y julio del año 2012, los cuales en su mayoría están en proceso de formación como analistas, asesores y auditores de los SGC. La técnica de muestreo aplicada fue de tipo aleatorio simple, con una muestra de 252 individuos. A la misma se le aplicó un cuestionario diseñado ad hoc, el cual fue validado por las técnicas de juicio de expertos y prueba piloto. El procedimiento de investigación se realizó a través de una secuencia, que incluyó la elaboración de un modelo teórico, basado en la revisión del estado del arte; un modelo factorial, sobre la base del análisis factorial de los datos de la encuesta; un modelo de regresión lineal, elaborado a través del método de regresión lineal simple y múltiple; un modelo de análisis de sendero, realizado con el software Amos 20 SPSS y finalmente, un modelo informático, realizado con el simulador Vensim PLE v.6.2. Los resultados obtenidos indican que el modelo teórico se transformó en un modelo empírico, en el cual, la variable independiente fue el SGC, la variable mediadora fue la integración de las dimensiones eliminación de la no conformidad, satisfacción del cliente interno y aprendizaje organizacional (ENCSCIAO) y la variable respuesta la integración de las dimensiones desempeño organizacional y aprendizaje organizacional (DOOA). Se verificó el efecto mediador del ENSCIAO sobre la relación SGC-DOOA con una bondad del ajuste, del 42,65%. En el modelo de regresión múltiple se encontró que las variables determinantes son eliminación de la no conformidad (ENC), conocimiento adquirido (CA) y conocimiento espontáneo (CE), lo cual fue corroborado con el modelo de análisis de sendero. El modelo informático se desarrolló empleando datos aproximados de una unidad de producción tipo, generándose cuatro escenarios; siendo el más favorable, aquel en el cual se aplicaba el SGC y variables relacionadas, reduciendo la desviación de la producción, incrementando el factor de recobro y ampliando la vida útil del yacimiento. Se concluye que la aplicación del SGC y constructos relacionados favorece el desempeño y la producción de las unidades de explotación de yacimientos petrolíferos maduros. Los principales aportes de la tesis son la obtención de un modelo de gestión de la producción de petróleo en yacimientos maduros, basado en los SGC. Asimismo, el desarrollo de un concepto de gestión de la calidad asociado a la reducción de la desviación de la producción petrolífera anual, al incremento del factor de recobro y al aumento de la vida útil del yacimiento. Las futuras líneas de investigación están orientadas a la aplicación del modelo en contextos reales y específicos, para medir su impacto y realizar los ajustes pertinentes. ABSTRACT The process of change from an industrial society to a knowledge-based society, which undergoes the globalized world in the twenty-first century, induces companies and organizations to develop a sustainable and competitive advantages based on its intangible assets, among which are noteworthy the management systems in general and particularly the quality management systems (QMS). Organizations engaged in oil production are influenced by said trend. Oil is a natural resource with limited reserves, where production and consumption has grown progressively, providing the largest share (35%) of the total energy consumed in the contemporary world, a contribution that will remain until the year 2035 according to the more conservative trust estimations. Therefore, it becomes necessary to develop innovative production models which contribute with the improvement of reservoirs´ recovery factor and the lifetime thereof, while meeting the production requirements and daily consumption of demanding global markets. The aim of this research is to develop a model of quality management and its effect on organizational performance through the mediator effect of the constructs, internal customer satisfaction and knowledge management in oil production. This research of explanatory nature, not experimental, transactional and expos-facto was carried out in the oil-region of Maracaibo Lake located to the west of Venezuela, which has more than 70 years in continuous production and has mature reservoirs. The population under study was 369 oil workers who participated in the technical quality workshops, during the months of May and July of 2012, the majority of which were in the process of training as analysts, consultants and auditors of the QMS. The sampling technique applied was simple random type. To a sample of 252 individuals of the population it was applied an ad hoc designed questionnaire, which was validated by the techniques of expert judgment and pilot test. The research procedure was performed through a sequence, which included the elaboration of a theoretical model, based on the review of the state of the art; a factorial model with based on factorial analysis of the survey data; a linear regression model, developed through the method of simple and multiple linear regression; a structural equation model, made with software °Amos 20 SPSS° and finally, a computer model, performed with the simulator Vensim PLE v.6.2. The results indicate that the theoretical model was transformed into an empirical model, in which the independent variable was the QMS, the mediator variable was the integration of the dimensions: elimination of non-conformity, internal customer satisfaction and organizational learning (ENCSCIAO) and the response variable the integration of the dimensions, organizational performance and learning organizational (DOOA). ENSCIAO´s mediator effect on the relation QMS-DOOA was verified with a goodness of fit of 42,65%. In the multiple regression model was found to be the determining variables are elimination of nonconformity (ENC), knowledge acquired (CA) and spontaneous knowledge (EC), which was verified with the structural equation model. The computer model was developed based on approximate data of an oil production unit type, creating four (04) scenarios; being the most favorable, that one which it was applied the QMS and related variables, reducing the production deviation, increasing the recovery factor and extending the lifetime of the reservoir. It is concluded that QMS implementation powered with the related constructs, favors performance and production of mature oilfield of exploitation reservoirs units. The main contributions of this thesis are obtaining a management model for oil production in mature oilfields, based on QMS. In addition, development of a concept of quality associated to reduce the annual oil production deviation, increase the recovery factor and increase oilfield lifetime. Future lines of research are oriented to the implementation of this model in real and specific contexts to measure its impact and make the necessary adjustments that might take place.

Riesgo del consumo de cannabis para la práctica físico-deportiva

El consumo de cannabis es uno de los principales problemas de salud pública, especialmente entre los jóvenes, dadas sus prevalencias de consumo. Esta droga puede provocar alteraciones psicomotrices en el individuo, por ello, el presente trabajo de investigación tiene como objetivo principal comprobar si el consumo de cannabis supone un riesgo añadido a la práctica físico-deportiva. Para alcanzar dicho objetivo, se dividió el trabajo en dos estudios interrelacionados entre sí. En el primer estudio o Estudio 1, “Repercusión del consumo de cannabis en las clases de Educación Física”, se realizó un cuestionario autoadministrado, dirigido al profesorado de Educación Física de la Comunidad de Madrid, con el fin de recoger su opinión sobre la posible presencia de consumidores de cannabis en sus aulas. El segundo estudio o Estudio 2, “Influencia del cannabis en el equilibrio, la coordinación, el tiempo de respuesta y la percepción temporal”, consistió en la realización de una serie de pruebas por parte de un grupo control y un grupo de consumidores de cannabis, para así cuantificar y cualificar los efectos de la inhalación de esta droga en la condición motriz. La encuesta que se utilizó para el Estudio 1, “El cannabis, los adolescentes y la práctica físico-deportiva”, pasó primero por una fase de elaboración, corrección y validación, y después, utilizándose la técnica de muestreo aleatorio por conglomerados, fue distribuido por los centros públicos de enseñanzas secundarias de la Comunidad de Madrid seleccionados. Se obtuvo respuesta de 93 profesores de Educación Física pertenecientes a 76 centros, es decir el 22,35% de los centros de la comunidad. Por último, se procedió al análisis, discusión y difusión de los resultados. En el Estudio 2, primero se procedió al diseño de la batería de pruebas a realizar, compuesta por 7 tests con 16 variables que valoraron el equilibrio, la coordinación, el tiempo de respuesta y la percepción temporal de los sujetos. Después se procedió a la selección de la muestra, formada por dos grupos de voluntarios de entre 18 y 30 años: un grupo control de 52 participantes, y un grupo de consumidores de cannabis, de 28 participantes con un hábito de consumo diferente. Los sujetos del grupo de consumidores realizaron las pruebas 20 minutos después de la inhalación de cannabis. Tras la realización de las pruebas por parte de todos los sujetos se procedió al análisis de los resultados obtenidos, segmentándolos por sexo y apareando las variables para evitar posibles efectos confundidores. Los resultados del primer estudio indicaron que el 75,27% del profesorado ha pensado alguna vez que sus alumnos consumían cannabis antes del inicio de su clase, hecho asociado a alteraciones psicológicas (90,63%) y cognitivo-conductuales (68,75%); no siendo factores influyentes el sexo o la experiencia docente de los encuestados (p>0,05). El segundo estudio aportó como principal resultado el empeoramiento de la percepción temporal y la conducta motriz de los sujetos que consumieron cannabis, en especial de su equilibrio y su coordinación (p<0,05). También indicó que hubo ligeras diferencias en función del hábito de consumo de esta droga, si bien los resultados se vieron influenciados por el tamaño de la muestra. Las conclusiones extraídas mostraron que el profesorado de Educación Física percibe la presencia de consumidores de cannabis en sus aulas, utiliza el diálogo con el alumnado como herramienta de actuación, y conoce la influencia negativa que tiene el consumo de esta droga en el rendimiento motor. También demuestran que el cannabis supone un riesgo añadido a la práctica físico-deportiva, debido al empeoramiento de la conducta motriz, en especial de la coordinación y el equilibrio. Además, las diferencias surgidas en base al hábito de consumo no son concluyentes pero si apuntan a que el consumo esporádico puede conllevar un peor rendimiento motor que el consumo habitual. ABSTRACT Cannabis use is one of the most important concerns of public health, particularly among young people, given their use prevalence. This drug can produce psychomotor alterations in the subject; therefore, this research work has as main aim to check if cannabis use is an added risk for physical and sporting practices. In order to achieve the objectives pursued, work was divided in two interrelated studies. First study or Study 1, “Cannabis use impact in Physical Education lessons”, a self-managed questionnaire addressed to Physical Education teachers in Community of Madrid was carried out, in order to gather the opinion about the possible existence of Cannabis users in their classes. Second Study or Study 2, “Cannabis influence in balance, coordination, reaction time and temporal perception”, consisted in a series of tests performed by a control group and a cannabis users group, in order to quantify and qualify the effects of inhalation of this drug in the motor skills. The questionnaire used for Study 1, “Cannabis, teenagers, and physical and sporting practices”, firstly went through an elaboration y correction phase, and then, using cluster sampling technique, was distributed within selected Secondary Education Centres from Community of Madrid. Response from 93 Physical Education teachers from 76 High Schools were obtained, this is 22,35% of total High Schools in Madrid. Finally, analysis, discussion and dissemination of results were held. In Study 2, first of all design of tests to be made was done, consisting on 7 different test with 16 variables that measured balance, coordination, response time and temporal perception in subjects. After that, sample selection was performed, comprised of 2 volunteers groups of ages between 18-30 years: a control group of 52 participants, and a Cannabis Users Group of 28 participants with different consumption habits. Users group subjects carried out tests 20 minutes after cannabis inhalation. After tests were performed by all subjects, results were analyzed and segmented by sex and matching variables in order to avoid confusion effects. First study results brought out that 75,27% of teachers have ever thought that their pupils used cannabis before getting into class, this fact is linked to psychological alterations (90,63%) and cognitive-behavioral (68,75%); not being influencing factors sex or teaching experience of the surveyed (p>0,05). Second study provided as most significant result the worsening of temporal perception and motor tasks behavior in subjects that had used cannabis, especially in regards of their balance and coordination (p<0,05). Also resulted that there were slight differences in consumption habits, although results were influenced by the sample size. Conclusions drawn showed that Physical Education teachers notice the presence of cannabis users in lessons, use dialogue with pupils as an action tool and acknowledge the negative influence this drug has in motor tasks performance. Also, it is shown that cannabis is an additional risk for physical and sporting practices due to deteriorating in motor skills, particularly in coordination and balance. In addition, the differences that may arise depending on the consumption habits are not conclusive, but they suggest that the sporadic drug use may be related to a worse motor performance than usual consumption.

Improving 3D Keypoint Detection from Noisy Data Using Growing Neural Gas

3D sensors provides valuable information for mobile robotic tasks like scene classification or object recognition, but these sensors often produce noisy data that makes impossible applying classical keypoint detection and feature extraction techniques. Therefore, noise removal and downsampling have become essential steps in 3D data processing. In this work, we propose the use of a 3D filtering and down-sampling technique based on a Growing Neural Gas (GNG) network. GNG method is able to deal with outliers presents in the input data. These features allows to represent 3D spaces, obtaining an induced Delaunay Triangulation of the input space. Experiments show how the state-of-the-art keypoint detectors improve their performance using GNG output representation as input data. Descriptors extracted on improved keypoints perform better matching in robotics applications as 3D scene registration.

Gradient-Domain Bidirectional Path Tracing

Gradient-domain path tracing has recently been introduced as an efficient realistic image synthesis algorithm. This paper introduces a bidirectional gradient-domain sampler that outperforms traditional bidirectional path tracing often by a factor of two to five in terms of squared error at equal render time. It also improves over unidirectional gradient-domain path tracing in challenging visibility conditions, similarly as conventional bidirectional path tracing improves over its unidirectional counterpart. Our algorithm leverages a novel multiple importance sampling technique and an efficient implementation of a high-quality shift mapping suitable for bidirectional path tracing. We demonstrate the versatility of our approach in several challenging light transport scenarios.

Binomial leap methods for simulating stochastic chemical kinetics

This paper discusses efficient simulation methods for stochastic chemical kinetics. Based on the tau-leap and midpoint tau-leap methods of Gillespie [D. T. Gillespie, J. Chem. Phys. 115, 1716 (2001)], binomial random variables are used in these leap methods rather than Poisson random variables. The motivation for this approach is to improve the efficiency of the Poisson leap methods by using larger stepsizes. Unlike Poisson random variables whose range of sample values is from zero to infinity, binomial random variables have a finite range of sample values. This probabilistic property has been used to restrict possible reaction numbers and to avoid negative molecular numbers in stochastic simulations when larger stepsize is used. In this approach a binomial random variable is defined for a single reaction channel in order to keep the reaction number of this channel below the numbers of molecules that undergo this reaction channel. A sampling technique is also designed for the total reaction number of a reactant species that undergoes two or more reaction channels. Samples for the total reaction number are not greater than the molecular number of this species. In addition, probability properties of the binomial random variables provide stepsize conditions for restricting reaction numbers in a chosen time interval. These stepsize conditions are important properties of robust leap control strategies. Numerical results indicate that the proposed binomial leap methods can be applied to a wide range of chemical reaction systems with very good accuracy and significant improvement on efficiency over existing approaches. (C) 2004 American Institute of Physics.

Design and construction for traditional house building

This study is concerned with quality and productivity aspects of traditional house building. The research focuses on these issues by concentrating on the services and finishing stages of the building process. These are work stages which have not been fully investigated in previous productivity related studies. The primary objective of the research is to promote an integrated design and construction led approach to traditional house building based on an original concept of 'development cycles'. This process involves the following: site monitoring; the analysis of work operations; implementing design and construction changes founded on unique information collected during site monitoring; and subsequent re-monitoring to measure and assess Ihe effect of change. A volume house building firm has been involved in this applied research and has allowed access to its sites for production monitoring purposes. The firm also assisted in design detailing for a small group of 'experimental' production houses where various design and construction changes were implemented. Results from the collaborative research have shown certain quality and productivity improvements to be possible using this approach, albeit on a limited scale at this early experimental stage. The improvements have been possible because an improved activity sampling technique, developed for, and employed by the study, has been able to describe why many quality and productivity related problems occur during site building work. Experience derived from the research has shown the following attributes to be important: positive attitudes towards innovation; effective communication; careful planning and organisation; and good coordination and control at site level. These are all essential aspects of quality led management and determine to a large extent the overall success of this approach. Future work recommendations must include a more widespread use of innovative practices so that further design and construction modifications can be made. By doing this, productivity can be improved, cost savings made and better quality afforded.

Albumin in tears

Albumin is not endogenous to the tear film and is present as a product of plasma leakage. It is used as a diagnostic marker of ocular insult and inflammation. Tear albumin is, however, poorly understood, with large variations in reported concentrations between studies. There is also no authoritative information on whether its presence in tears is responsive or part of an adaptive reaction.The presented research aimed to resolve the disparities in published tear albumin concentrations and investigate the role of albumin in the tear film. Collation and evaluation of the available literature identified collection method, stimulus, assay technique, and disease state as factors able to influence quoted tear albumin to different extents. Difference in sampling technique exhibited the largest variations in mean tear albumin concentrations. Review of the literature also highlighted that little systematic investigations of the daily cycle of tear albumin levels, and subject-to-subject-variation, had been carried out. In order to remedy this shortcoming, variations in tear albumin concentration were investigated in 13 subjects throughout the waking day. Results identified a time period where albumin levels are relatively stable (2-6 hours post-waking). This was designated a suitable baseline for the determinations of tear albumin concentrations and subject-to-subject comparisons. Significantly, a previously unrecognised progressive increase in albumin concentration during the latter part of the day was also identified in the population. This increase suggests that albumin may play a more active and dynamic role in the ocular environment than is commonly perceived. To facilitate the collection of additional tear albumin data, tear sampling and point-of-care analysis in contact lens clinics were investigated. Two instruments were evaluated and were found to be suitable for the analysis of tear albumin in commercial institutions. Collectively, the described research has provided new insight into tear albumin and a strong foundation for further studies.

Hydrodynamics and mass transfer studies in a scheibel extractor

A 10 cm diameter four-stage Scheibel column with dispersed phase wetted packing sections has been constructed to study the hydrodynamics and mass transfer using the system toluene-acetone-water. The literature pertaining to the above extractor has been examined and the important phenomena such as droplet break-up and coalescence, mass transfer and backmixing have been reviewed. A critical analysis of the backmixing or axial mixing models and the corresponding techniques for parameter estimation was applied and an optimization technique based on Marquardt's algorithm was implemented. A single phase sampling technique was developed to estimate the acetone concentration profile in both phases along the column. Column flooding characteristics were investigated under various operating conditions and it was found that, when the impellers were located at about DI/5cm from the upper surface of the pads, the limiting flow rates increased with impeller speed. This unusual behaviour was explained in terms of the pumping effect created by the turbine impellers. Correlations were developed to predict Sauter mean drop diameters. A five-cell with backflow model was used to estimate the column performance (stage efficiency) and phases non-ideality (backflow parameters). Overall mass transfer coefficients were computed using the above model and compared with those calculated using the correlations based on single drop mechanism.

A simple bioanalytical method for the quantification of antiepileptic drugs in dried blood spots

An increasing number of publications on the dried blood spot (DBS) sampling approach for the quantification of drugs and metabolites have been spurred on by the inherent advantages of this sampling technique. In the present research, a selective and sensitive high-performance liquid chromatography method for the concurrent determination of multiple antiepileptic drugs (AEDs) [levetiracetam (LVT), lamotrigine (LTG), phenobarbital (PHB)], carbamazepine (CBZ) and its active metabolite carbamazepine-10,11 epoxide (CBZE)] in a single DBS has been developed and validated. Whole blood was spotted onto Guthrie cards and dried. Using a standard punch (6 mm diameter), a circular disc was punched from the card and extracted with methanol: acetonitrile (3:1, v/v) containing hexobarbital (Internal Standard) and sonicated prior to evaporation. The extract was then dissolved in water and vortex mixed before undergoing solid phase extraction using HLB cartridges. Chromatographic separation of the AEDs was achieved using Waters XBridge™ C18 column with a gradient system. The developed method was linear over the concentration ranges studied with r ≥ 0.995 for all compounds. The lower limits of quantification (LLOQs) were 2, 1, 2, 0.5 and 1 μg/mL for LVT, LTG, PHB, CBZE and CBZ, respectively. Accuracy (%RE) and precision (%CV) values for within and between day were <20% at the LLOQs and <15% at all other concentrations tested. This method was successfully applied to the analysis of the AEDs in DBS samples taken from children with epilepsy for the assessment of their adherence to prescribed treatments.