Trombose venosa profunda aguda: avaliação prospectiva do início do processo de revanalização das veias dos membros inferiores pelo mapeamento dúplex em cores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema de pagos transnacionales vigentes en América Latina: ALADI, SML y SUCRE

Incluye bibliografía.

Avaliação clínica e ultrassonografia tardia de pacientes com trombose venosa profunda, portadores de trombofilia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação de sondagem elétrica e GPR no mapeamento geotécnico no município de Belém-PA

Para a construção de edifícios o engenheiro necessita de informações geotécnicas do subsolo de rasa e média profundidades para projetar fundações. Com a implantação do projeto de Macrodrenagem da Bacia do Una de Belém, áreas que foram beneficiadas terão, num futuro próximo, um grande potencial para a ocupação e a construção de edifícios devido sua localização privilegiada. Por isso, essa área foi escolhida para investigação geofísica com o objetivo de mapeamento das camadas litológicas e consequentemente o topo da camada rija, onde geralmente se posicionam as fundações prediais profundas. Os métodos geofísicos utilizados foram de sondagem elétrica com arranjo Schlumberger, na determinação da resistividade aparente (p_α) em subsuperfície, e um eletromagnético, o radar de penetração no solo, através de um perfil, como uma ferramenta auxiliar das informações. As curvas de resistividade aparente obtidas com as sondagens Schlumberger foram processadas por inversão considerando um modelo de camadas planas, horizontais, homogêneas e isotrópicas e sua interpretação foi auxiliada por informações litológicas obtidas por sondagens a percussão com ensaio SPT. Assim, uma vez determinadas as variações de resitividades, foram confeccionadas três seções geoelétricas-litológicas e um mapa de contorno de profundidade do topo da camada rija na área estudada, com a finalidade de auxiliar o engenheiro em projetos de prédios nesta área.

Contextualização deposicional da formação Rio Claro no município de Paulínia/SP empregando simulações estocásticas

The Rio Claro Formation, Tertiary-Quaternary age, is composed of unconsolidated sediments deposited by fluvial systems. In Paulínia (SP) region geological studies comprising sedimentological, structural and geomorphological aspects indicate that the Rio Claro Formation is constituted by deposits of a meandering fluvial system. Data from SPT drillings were used to obtain sedimentary textural information in order to generate stochastic stratigraphic models. Particle size analysis was carried with the core samples which resulted in the distinction of five litofacies, three of which can be grouped into only one mudstone unit. The other two facies represent channel belt facies, being clayey sands and medium to coarse sands. Geostatistical modeling of the stratigraphic architecture followed together with correlation of analogue outcrop data and conceptual models for this type of depositional system. 100 models were generated with the SPT drillings and 50 models were generated with data from an analogue outcrop, which allowed constraining of both simulation sets to the depositional model given for the region. T-PROGS methodology has good applicability in simulating stratigraphic frameworks and its inherent limitations may be approached with parallel studies, such as stochastic modeling of analogue outcrops or geophysical methods

Coleta de dados, modelagem e controle de qualidade do sistema de planejamento pinnacle3

Qualidade na coleta de dados do feixe de radiação, modelagem por meio do sistema de planejamento de tratamento (SPT) e controle da qualidade do processo envolvido são cruciais à fidedignidade do serviço de radioterapia de forma a contribuir à eficácia do tratamento e segurança do principal ente envolvido no final de toda essa sistemática, o paciente. Para isso foi proposto nesse presente trabalho a coleta de dados do feixe de raios-x de 6MV seguido da introdução desses dados ao SPT para processo de modelagem computacional que teve agregado, a todo esses processos, o controle da qualidade segundo critérios de aceitação

Alunos com baixo desempenho escolar no Ensino Fundamental I: análise das condições de enfrentamento de adversidades

Pós-graduação em Educação Escolar - FCLAR

Desenvolvimento de sistema eletrônico para instrumentar um DPL em ensaio dinâmico de resistência do solo

Pós-graduação em Engenharia Elétrica - FEIS

Go/N ratio in tropical soils from Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interpretação racional do ensaio DPL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação da teoria da confiabilidade em estacas escavadas de grande diâmetro para obtenção das superfícies resistentes de projeto

In this work, the author looks forward to develop a new method capable of incorporate the concepts of the Reliability Theory and Ruin Probability in Deep Foundations, in order to do a better quantification of the uncertainties, which is intrinsic in all geotechnical projects, meanly because we don't know all the properties of the materials that we work with. Using the methodologies of Decourt Quaresma and David Cabral, resistance surfaces have been developed utilizing the data achieved from the Standard Penetration Tests performed in the field of study, in conjecture with the loads defined in the executive project of the piles. The construction of resistance surfaces shows to be a very useful tool for decision making, no matter in which phase it is current on, projecting or execution. The surfaces were developed by Kriging (using the software Surfer® 12), making it easier to visualize the geotechnical profile of the field of study. Comparing the results, the conclusion was that a high safety factor doesn't mean higher security. It is fundamental to consider the loads and resistance of the piles in the whole field, carefully choosing the project methodology responsible to define the diameter and length of the piles

Previsão da capacidade de carga de estacas escavadas em solo arenoso da região de Araquari-SC

In Geotechnical engineering the foundation projects depend on the bearing capacity and the acceptable displacements. One of the possible ways to predict the bearing capacity of foundations is through semi-empirical statistical methods which correlate in-situ tests (SPT and CPT). The piles breaking loads are defined by the interpretation of the load x head displacement curve and the experimental data acquired through the load test. In this work it is studied the behavior of bored piles executed in the Araquari/SC region, comparing the bearing capacity values predicted by the methods DECOURT & QUARESMA MODIFICADO (1996), AOKI & VELLOSO MODIFICADO MONTEIRO (2000), MILITITISKY E ALVES (1985), DECOURT & QUARESMA (1978), MÉTODO DE AOKI & VELLOSO (1975) e PHILOPANNAT (1986), with the results of the load test, evaluating their differences and discussing parameters that have direct effects on the prediction

Aplicação da teoria da confiabilidade em estacas escavadas de grande diâmetro para obtenção das superfícies resistentes de projeto

In this work, the author looks forward to develop a new method capable of incorporate the concepts of the Reliability Theory and Ruin Probability in Deep Foundations, in order to do a better quantification of the uncertainties, which is intrinsic in all geotechnical projects, meanly because we don't know all the properties of the materials that we work with. Using the methodologies of Decourt Quaresma and David Cabral, resistance surfaces have been developed utilizing the data achieved from the Standard Penetration Tests performed in the field of study, in conjecture with the loads defined in the executive project of the piles. The construction of resistance surfaces shows to be a very useful tool for decision making, no matter in which phase it is current on, projecting or execution. The surfaces were developed by Kriging (using the software Surfer® 12), making it easier to visualize the geotechnical profile of the field of study. Comparing the results, the conclusion was that a high safety factor doesn't mean higher security. It is fundamental to consider the loads and resistance of the piles in the whole field, carefully choosing the project methodology responsible to define the diameter and length of the piles

Previsão da capacidade de carga de estacas escavadas em solo arenoso da região de Araquari-SC

In Geotechnical engineering the foundation projects depend on the bearing capacity and the acceptable displacements. One of the possible ways to predict the bearing capacity of foundations is through semi-empirical statistical methods which correlate in-situ tests (SPT and CPT). The piles breaking loads are defined by the interpretation of the load x head displacement curve and the experimental data acquired through the load test. In this work it is studied the behavior of bored piles executed in the Araquari/SC region, comparing the bearing capacity values predicted by the methods DECOURT & QUARESMA MODIFICADO (1996), AOKI & VELLOSO MODIFICADO MONTEIRO (2000), MILITITISKY E ALVES (1985), DECOURT & QUARESMA (1978), MÉTODO DE AOKI & VELLOSO (1975) e PHILOPANNAT (1986), with the results of the load test, evaluating their differences and discussing parameters that have direct effects on the prediction

Subcritical crack growth and in vitro lifetime prediction of resin composites with different filler distributions

Objectives. Verify the influence of different filler distributions on the subcritical crack growth (SCG) susceptibility, Weibull parameters (m and sigma(0)) and longevity estimated by the strength-probability-time (SPT) diagram of experimental resin composites. Methods. Four composites were prepared, each one containing 59 vol% of glass powder with different filler sizes (d(50) = 0.5; 0.9; 1.2 and 1.9 mu m) and distributions. Granulometric analyses of glass powders were done by a laser diffraction particle size analyzer (Sald-7001, Shimadzu, USA). SCG parameters (n and sigma(f0)) were determined by dynamic fatigue (10(-2) to 10(2) MPa/s) using a biaxial flexural device (12 x 1.2 mm; n = 10). Twenty extra specimens of each composite were tested at 10(0) MPa/s to determine m and sigma(0). Specimens were stored in water at 37 degrees C for 24 h. Fracture surfaces were analyzed under SEM. Results. In general, the composites with broader filler distribution (C0.5 and C1.9) presented better results in terms of SCG susceptibility and longevity. C0.5 and C1.9 presented higher n values (respectively, 31.2 +/- 6.2(a) and 34.7 +/- 7.4(a)). C1.2 (166.42 +/- 0.01(a)) showed the highest and C0.5 (158.40 +/- 0.02(d)) the lowest sigma(f0) value (in MPa). Weibull parameters did not vary significantly (m: 6.6 to 10.6 and sigma(0): 170.6 to 176.4 MPa). Predicted reductions in failure stress (P-f = 5%) for a lifetime of 10 years were approximately 45% for C0.5 and C1.9 and 65% for C0.9 and C1.2. Crack propagation occurred through the polymeric matrix around the fillers and all the fracture surfaces showed brittle fracture features. Significance. Composites with broader granulometric distribution showed higher resistance to SCG and, consequently, higher longevity in vitro. (C) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.