The death of Osama bin Laden - the end of Al-Qaeda's Pan-Islamic ambition?

This paper evaluates the implications of Osama bin Ladin’s death for the future of al-Qaeda’s global jihad. It critically examines the debate as to the make-up of the group and identifies bin Ladin’s primary role as chief ideologue advocating a defensive jihad to liberate the umma. The rationale and appeal of bin Ladin’s message and Muslims’ reaction to both his statements and al-Qaeda’s increasing use of sectarian violence are assessed in the context of Pan-Islam as political ideology. The paper concludes that while the ideal of Islamic unity and the sentiment of Muslim solidarity are unlikely to vanish, al-Qaeda’s violent jihad has not only failed to achieve these goals but has worked against it, thereby confining it to the political margins.

Here come the Salafis: the framing of Al-Qaeda's ideology within terrorism research

The purpose of the paper is to analyse different narratives about al Qaeda (AQ) in Terrorism Studies, and to demonstrate the methodological and empirical problems associated with them. It demonstrates that AQ as it emerges within Terrorism Studies is more of an artefact of preconceived notions about fundamentalist ideology than the result of rigid empirical research.

Aluminium distribution in ZSM-5 revisited: the role of Al-Al interactions

We present a theoretical study of the distribution of Al atoms in zeolite ZSM-5 with Si/Al=47, where we focus on the role of Al-Al interactions rather than on the energetics of Al/Si substitutions at individual sites. Using interatomic potential methods, we evaluate the energies of the full set of symmetrically independent configurations of Al siting in a Si94Al2O192 cell. The equilibrium Al distribution is determined by the interplay of two factors: the energetics of the Al/Si substitution at an individual site, which tends to populate particular T sites (e.g. the T14 site), and the Al-Al interaction, which at this Si/Al maximises Al-Al distances in agreement with Dempsey’s rule. However, it is found that the interaction energy changes approximately as the inverse of the square of the distance between the two Al atoms, rather than the inverse of the distance expected if this were merely charge repulsion. Moreover, we find that the anisotropic nature of the framework density plays an important role in determining the magnitude of the interactions, which are not simply dependent on Al-Al distances.

Comparison between blue and green stimulated luminescence of Al(2)O(3):C

This paper presents a systematic comparison of OSL signals from Al(2)O(3):C when stimulated with blue and green light. Al(2)O(3):C detectors were irradiated with various doses and submitted to various bleaching regimes using yellow, green and blue light. Most of the investigations were carried out using Luxel (TM)-type detectors used in the commercial Luxet (TM) and InLight (TM) dosimetry systems (Landauer Inc.). Al(2)O(3):C single crystals and Al(2)O(3):C powder were also used to complement the investigations. The results show that, although blue stimulation provides faster readout times (OSL curves that decayed faster) and higher initial OSL intensity than green stimulation, blue stimulation introduced complicating factors. These include incomplete bleaching of the dosimetric trap when the Al(2)O(3):C detectors are bleached with yellow or green light and the OSL is recorded with blue light stimulation, and an increased residual level due to stimulation of charge carriers from deep traps. The results warrant caution when using blue stimulation to measure the OSL signal from Al(2)O(3):C detectors, particularly if the doses involved are low and the detectors have been previously exposed to high doses. (C) 2010 Elsevier Ltd. All rights reserved.

Boundary identification criteria and geometry analysis of Al 7050 stretch zone from elevation profiles

This article describes the development of a method for analysis of the shape of the stretch zone surface based on parallax measurement theory and using digital image processing techniques. Accurate criteria for the definition of the boundaries of the stretch zone are established from profiles of fracture surfaces obtained from crack tip opening displacement tests on Al-7050 alloy samples. The elevation profiles behavior analysis is based on stretch zone width and height parameters. It is concluded that the geometry of the stretch zone profiles under plane strain conditions can be described by a semi-parabolic relationship. (C) Elsevier B.V., 1999. All rights reserved.

The surface treatment influence on the fatigue crack propagation of Al 7050-T7451 alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative low doses and routes of administering a prostaglandin F2 alpha analogue to induce luteolysis in Nelore cows

The present study was conducted in order to verify the efficacy of lower doses and alternative routes of a prostaglandin F2 alpha analogue, luprostiol (PGF), for the induction of luteolysis and the precipitation of estrus in nonlactating Nelore cows (Bos taurus indicus). A conventional dose (15 mg) of PGF was compared to doses lower than the conventional dose, which ranges from 10 to 50%, that were administered intramuscularly (IM), intravulvosubmucosally (IVSM), or in the Bai-hui acupuncture site located within the lumbosacral area. The cows were administered PGF 8 day after estrus in the presence of a corpus luteum, and randomly assigned to the following groups: G1 (positive control), 15 mg, IM (n = 23); G2, 7.5 mg, IM (n = 23); G3, 3.75 mg, I M (n = 24); G4, 7.5 mg, IVSM (n = 25); G5, 3.75 mg, Bai-hui acupoint (n = 24); and G6, 1.5 mg, Bai-hui acupoint (n = 25). The results indicated that 50% of a conventional dose of PGF (7.5 mg) resulted in a complete luteal regression (plasma progesterone < 1 ng/ml) at Hour 48, and hastened estrus, regardless of whether or not PGF was administered IM or IVSM. Comparatively, 10 or 25% of the conventional dose, even when administered to the Bai-hui acupoint, resulted in an initial reduction in the concentration of progesterone at Hour 24, followed by an increase observed at Hour 48. In conclusion, 25% of a conventional PGF dose administered via the Bai-hui acupoint proved inadequate to induce a complete luteal regression, whereas 50% of a conventional dose administered IM or IVSM was found to be the minimal dose required to induce effectively a complete luteal regression, and to precipitate the onset of estrus in nonlactating Nelore cows.

Influence of iron addition on the microstructure and the electrochemical corrosion of Al-Zn-Mg alloys

The effect of Fe addition on the microstructural properties and the corrosion resistance of Al-Zn-Mg alloys submitted to different heat treatments (cast, annealed and aged), has been studied in chloride solutions using optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), cyclic polarization (CP) and open circuit potential (o.c.p.) measurements. The presence of 0.3% Fe in the alloy limited the growth of the MgZn2 precipitates, both in the annealed and in the quenched specimens. No effect of Cr on the grain size in the presence of Fe was found because of the accumulation of Cr in the Fe-rich particles. Fe in the Al-Zn-Mg alloys also made them more susceptible to pitting. Pitting occurred mainly near the Fe-rich particles both, under o.c.p. conditions in O-2-saturated solutions and during the CP.

Effect of welding on the microstructure and electrochemical corrosion of Al-Zn-Mg-Fe alloys

The effect of gas tungsten are welding on the microstructure and electrochemical corrosion of Al-Zn-Mg-Fe alloys submitted to different heat treatments (as fabricated, annealed and aged) has been studied using optical microscopy, SEM, TEM, EDX, cyclic voltammetry and corrosion potential measurements in chloride solutions. The electrochemical techniques were very sensitive to the change in the phase compositions produced by welding. Welding caused a decrease in the mean grain size, in the hardness and in the corrosion resistance of the age-hardened alloys. The structure of the latter became strongly altered by welding to lead to phase compositions very close to those of the cold rolled and annealed specimens. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Evaluation of Lubricating Oil Preparation Procedures for the Determination of Al, Ba, Mo, Si and V by High-Resolution Continuum Source FAAS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the thermal behavior of Al(III) and In(III)-diclofenac complexes in solid state

The Al and In-diclofenac compounds were prepared. Thermogravimetry (TG) and X-ray diffraction powder patterns were used to characterize these compounds. Details concerning the dehydration and thermal decomposition as well as data of kinetic parameters have been described here. The kinetic studies of these stages were evaluated from several heating rates with mass sample of 2 and 5 mg in open crucibles under nitrogen atmosphere. The results of the present study improve the knowledge on these compounds including their dehydration and thermal stability. The obtained data leads to a dependence on the sample mass, which results in two kinetic behavior patterns.