Caracterização morfológica e sedimentar do talude continental (foz do Amazonas)

Created on 3 december 1997, the REMPLAC (Program for Assessment of Mineral Potencial of the Continental Shelf), this porgram aimed to make the basic survey, systematic geological and geophysical continental shelf, detail, at an appropriate scale, sites geo-economic, and perform the analysis and evaluation of mineral deposits. The REMPLAC should continue the efforts of Global Recognition Program of the Brazilian Continental Margin REMAC closed in 1978, the operations Geophysical Sea (GEOMAR) developed by the Directorate of Hydrography and Navigation and the various initiatives of the Program of Marine Geology and Geophysics (PGGM). Despite the high interest on the Amazon platform, there is little information o their morphology and sediment characterization, and in order to fill this gap, the present work samples sedimentological point followed by seismic acquisition. And the studies were to characterize the possible area of interest as being directly influence by tides, which sediments are reworked throughout the platform featuring grain angle with sharp corners, and the carbonate content increases as it approaches the breakdown the platform, and the bodies found outside the foraminifera and mollusks. However, diverging with organic matter that reduces its concentration as it moves away from the coast. The seismic profiles do not get satisfactory results because of low visibility, however, to correlate with the spot samples, of sediment were possible morphological characterization of the area.

Estruturação da seqüência vulcano-sedimentar Rio Mata Cavalo (Morro do Pilar, MG, Brasil) baseada na análise qualitativa de dados geofísicos

Geofísica terrestre (magnetometria e radiometria) foi utilizada como ferramenta de apoio ao mapeamento geológico em uma área de pesquisa mineral da Companhia Mineradora de Minas Gerais (COMIG), denominada Alvo Bueiro, localizada a sudeste da cidade de Morro do Pilar, na Serra do Espinhaço, Estado de Minas Gerais. A integração de informações de geologia de superfície com os dados geofísicos correspondentes permitiu definir quatro zonas: A, B, C e D. A Zona A, caracterizada por altos valores de susceptibilidade magnética e baixos valores de radiometria, é composta por itabiritos do Grupo Serra da Serpentina. A Zona B, pertencente ao mesmo grupo, é constituída por filitos cinza e metassiltitos e mostra baixa susceptibilidade magnética; interrupções nas linhas de contorno foram interpretadas como decorrentes de falhas de empurrão. A Zona C, relacionada à Seqüência Vulcano-Sedimentar Rio Mata Cavalo, é caracterizada por uma expressiva anomalia do campo magnético total em xistos máficos e ultramáficos com lentes de formações ferríferas e filitos carbonosos negros; esta zona hospeda as mais importantes anomalias geoquímicas de ouro conhecidas na área em estudo. A Zona D, correspondente a ortognaisses cisalhados do Complexo Dona Rita, mostra os mais elevados valores de radiometria do Alvo Bueiro e baixas respostas magnéticas.

Prospecção geofísica em ocorrência de cobre localizada na bacia sedimentar do Camaquã (RS)

Estudos de pesquisa mineral são fundamentais para o reconhecimento e a incorporação de novas reservas. Esse trabalho apresenta os resultados de aplicação do método geofísico da eletrorresistividade numa ocorrência mineralizada em carbonatos de cobre, por meio da técnica de caminhamento elétrico em arranjo azimutal. A área de estudos está inserida na bacia sedimentar do Camaquã, formada por um conjunto de unidades estratigráficas sedimentares e vulcanogênicas, onde são descritas diversas ocorrências cupríferas. A presença de azurita e malaquita em fraturas e zonas de maior porosidade em arenito encaixante define a geologia local. Os modelos de inversão revelam anomalias circulares de resistividade moderada para até 25m abaixo da ocorrência aflorante e anomalias de baixa resistividade em profundidades abaixo de 25m, além de áreas adjacentes com alta resistividade. Indicadores de mineralização descritos para ocorrências de cobre estudadas, no âmbito da bacia sedimentar do Camaquã, ocorrem na área de estudos e permitem caracterização em termos de resistividade elétrica. Áreas com silicificação apresentam alta resistividade, enquanto que valores intermediários são atribuídos a zonas com carbonatação e, finalmente, áreas de baixa resistividade, provavelmente, indicam concentrações de sulfetos disseminados.

Solubilização de fosfatos de rocha por Aspergillus niger em diferentes tipos de vinhaça

Aspergillus niger was inoculated into flasks containing mixed of different origins and fluorapatite as a source of phosphorus, or alternatively rock phosphates of different compositions. There was no difference in fungal growth or fluorapatite solubilization when sterilized or unsterilized vinasse was used. Total and soluble solid content was at least two times higher in 65/35 vinasse than in 10/1 vinasse. The higher total sugar content causing higher titratable acidity levels, or the lower fungal growth, may possibly have favored the greater accumulation of soluble phosphate in 10/1 than in 65/10 vinasse. No appreciable differences in residual soluble phosphate levels were detected with increasing fluorapatite concentrations. Rock phosphates of different origins and with different phosphorus concentrations affected the solubilizing ability of the fungus. Whereas crude concentrated apatite phosphorus favored the greatest accumulation of soluble phosphate in the culture medium (1.08 mg/ml), the highest solubilization (72% total phosphate) was achieved with Patos de Minas material obtained from the first crushing.

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).

Sucessão sedimentar do Grupo Bauru na região de Pirapozinho (SP)

There is yet enthusiastic debate in the literature about the environmental conditions that originated the Cretaceous deposits of the Bauru Group, despite many authors accept that arid climatic conditions widely dominant at the base, evolved to chiefly fluvial-lacustrine conditions at the intermediate portion, and to arid conditions again at the top of the unit. The Bauru Group covers an area of about 117.000 km 2 of the Paraná Basin in São Paulo State territory. Core samples of this lithostratigraphic unit collected from a drill hole at Pirapozinho (Southwest of the São Paulo State) are described and together with well log data brought new information that do not agree with the described model. It was identified in this well the Caiuá, Pirapozinho, Santo Anastácio, Araçatuba and Adamantina formations. The study of these core samples clearly showed the dominance of hydrodynamic sedimentary structures and high to medium intensity of bioturbation in whole profile. These characteristics observed in core samples and compared to patterns of geophysical logs testify the dominance of fluvial processes in the Bauru Group deposition at the studied area. These new data suggests that the paleo-environmental evolution of the unit was much more complex, showing strong lateral and vertical changes that diverges from the model more widely accepted in the literature.

Paisagem natural paleógena da bacia sedimentar de São Paulo no município de guarulhos, estado de São Paulo

Paleogene sediments of this region represent a significant source of water for urban, industrial and agricultural activities. This basin is part of the Southeastern Brazilian Continental Rift, which occupies a large portion of this geographical area. This study aims to present the evolution of the natural Paleogene landscape, through an analysis of its stratigraphic intcrops and underground portions based on the concept of facies and facies associations. A total of nine clastic and separate lithofacies were recognized and grouped into two main facies associations. These data suggest the existence of two depositional interdigitated systems: fluvial braided fans, which were predominant in parts of the northern and central area, and another composed of lacustrine sediments found in its central-south region. The paleogeography herein outlined will help considerably in the detection of new areas for mineral and water resources prospection, as well as in urban planning projects of this region.

Investigação tecnológica de arenitos silicificados da Formação Botucatu (ne do Paraná) para uso como rocha de revestimento

For many years the silicified sandstone associated of the Botucatu Formation has been the target of interest to researchers and miners, either for understanding the genesis of silicification or for your use as dimension stone and covering on the building industry. If in the first there are several articles available in the geological literature the second there are only technical data marketing available. In the northeast portion of the Paraná State and southwest of the São Paulo State these rocks are mined and traded as covering stones. Not much is known about their intrinsic characteristics and technological properties. To improve the knowledge of the technological behavior of these materials, samples from a quarry from Ribeirao Claro region were petrographically and physically characterized according to the standards established by the Brazilian Association of Technical Standards to dimension stones. Therefore, two bulk samples of silicified sandstone of the Ribeirão Claro/PR region were studied and characterized following the norms established by Brazilian Association of Technical Standards for dimension stones. The results obtained in the petrographical and technological studies are presented and indicated that, in general, the technological performance presented by sandstone studied induces limitations of use as covering materials, mainly horizontally as pavements, door stone and step ladder.

Polarização induzida aplicada no estudo de ocorrencia de cobre localizada a nordeste de Caçapava do Sul (RS)

Mineral research works are fundamentals for recognition and incorporation of new reserves. This paper present an integrated analysis of geologic and metallogenetics data, with results gotten from the application of the Induced Polarization geophysical method, in an copper ore occurrence, inserted in Camaquã sedimentary basin, situated in northeast of Caçapava do Sul city (RS). In area ocurr arkosean arenites average coarse, the intensely silicified and recrystallized, pertaining to Passo da Promessa Formation. The presence of azurita and malachite in breakings and high porosity zones of the host rock characterizes the mineral occurrence in surface, located in the crossing two fault families. The inversion models indicate the predominance of high chargeability in vulcanics tuff, rock of high porosity in relation to the andesites and metaconglomerates gifts in the area. The strong structural control of the mineral occurrence associated the high chargeability in volcanic tuff is indications of the hydrothermal fluid access by means of faults, until rocks with great porosity, where it occurred disseminations of copper sulfides in depth and carbonates in surface.

Análise das vibrações resultantes do desmonte de rocha em mineração de calcário e argilito posicionada junto à área urbana de Limeira (SP) e sua aplicação para a minimização de impactos ambientais

Pós-graduação em Geociências e Meio Ambiente - IGCE

Geologia e potencialidade do granito Vermelho Capão Bonito (Sudoeste do Estado de São Paulo) como rocha ornamental

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlação entre dados geofísicos e geológicos em ocorrência de cobre localizada na bacia sedimentar do Camaquã - RS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos granitos Giallo São Francisco Real, Branco Dallas e Branco Marfim, do muncípio de Barra de São Francisco/ES para aplicação como rocha ornamental e de revestimento

Pós-graduação em Geologia Regional - IGCE

Tempo e devir em convulsão: dimensões da história no cinema de Glauber Rocha (1964-1969)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)