Análise tensão deformação de uma barragem de concreto em solo residual preponderantemente anisotrópico.

Estudos de fundações de obras de arte, como barragens de concreto-gravidade e barragens de terra, devem contemplar todos os esforços atuantes no maciço de fundação, principalmente as tensões e as deformações esperadas durante todo o processo construtivo e no período pós-construtivo. Quando essas estruturas são apoiadas sobre rochas de boa sanidade, a escolha do barramento geralmente favorece a implantação de barragens de concreto. Entretanto, quando os maciços de fundação são formados por solos, a opção técnica geralmente mais bem aceita é quanto à utilização de barragens de terra. Em ambos os casos, as análises de estabilidade e de deformação são desenvolvidas por métodos analíticos bem consolidados na prática. Nas condições mais adversas de fundação, seja em rochas ou em solos com marcante anisotropia e estruturas reliquiares herdadas da rocha-mãe, a utilização de modelos constitutivos anisotrópicos em análises por elementos finitos propicia simulações mais realistas dessas feições estruturais, contribuindo para o seu melhor conhecimento. O presente trabalho teve por objetivo demonstrar a utilização de um modelo constitutivo anisotrópico no estudo da fundação da Barragem San Juan, localizada na República Dominicana, que foi concebida como uma estrutura tipo concreto-gravidade apoiada sobre solos residuais jovens altamente anisotrópicos. Nessa obra, apesar de sua pequena altura, a presença marcante de descontinuidades ensejou um estudo mais detalhado do comportamento tensão-deformação da fundação, levando em conta o levantamento detalhado da atitude das descontinuidades presentes no maciço e os resultados de ensaios de resistência em planos paralelos e normais às descontinuidades. Para a estimativa de deformações, os respectivos módulos de Young (Es) foram estimados com base em correlações com a resistência à penetração SPT desenvolvidas nesta dissertação, a partir de um estudo estatístico baseado em várias publicações disponíveis na literatura. As análises numéricas por elementos finitos foram desenvolvidas através do programa Plaxis 2D, utilizando-se como modelo constitutivo aquele denominado The Jointed Rock Model, que é particularmente recomendado para análises de estabilidade e deformação de materiais anisotrópicos. Os resultados das análises numéricas foram comparados com as análises de equilíbrio limite elaboradas para o projeto executivo da referida barragem, pelo programa Slope, utilizando o método rigoroso de Morgenstern e Price, que se mostrou conservador. Os resultados das análises numéricas mostraram sua inequívoca versatilidade para a escolha de opções de reforço da fundação, através de dentes que objetivavam o aumento das condições de estabilidade da barragem.

RESIDUAL DEFECTS FOLLOWING RAPID ANNEALING OF BORON IMPLANTED SILICON WITH AND WITHOUT PREAMORPHISATION BY SILICON IMPLANTATION.

Implants of boron into silicon which has been made amorphous by silicon implantation have a shallower depth profile than the same implants into silicon. This results in higher activation and restricted diffusion of the B implants after annealing, and there are also significant differences in the microstructure after annealing compared with B implants into silicon. Rapid isothermal heating with an electron beam and furnace treatments are used to characterize the defect structure as a function of time and temperature. Defects are seen to influence the diffusion of non-substitutional boron.

An investigation into the residual stresses in an aluminium 2024 test weld

This paper uses finite element (FE) analysis to examine the residual stresses generated during the TIG welding of aluminium aerospace alloys. It also looks at whether such an approach could be useful for evaluating the effectiveness of various residual stress control techniques. However, such simulations cannot be founded in a vacuum. They require accurate measurements to refine and validate them. The unique aspect of this work is that two powerful engineering techniques are combined: FE modelling and neutron diffraction. Weld trials were performed and the direct measurement of residual strain made using the ENGIN neutron diffraction strain scanning facility. The predicted results show an excellent agreement with experimental values. Finally this model is used to simulate a weld made using a "Low Stress No Distortion" (LSND) technique. Although the stress reduction predicted is only moderate, the study suggests the approach to be a quick and efficient means of optimising such techniques.

The influence of repeated loading, residual stresses and shakedown on the behaviour of tribological contacts

Most tribological pairs carry their service load not just once but for a very large number of repeated cycles. During the early stages of this life, protective residual stresses may be developed in the near surface layers which enable loads which are of sufficient magnitude to cause initial plastic deformation to be accommodated purely elastically in the longer term. This is an example of the phenomenon of 'shakedown' and when its effects are incorporated into the design and operation schedule of machine components this process can lead to significant increases in specific loading duties or improvements in material utilization. Although the underlying principles can be demonstrated by reference to relatively simple stress systems, when a moving Hertzian pressure distribution in considered, which is the form of loading applicable to many contact problems, the situation is more complex. In the absence of exact solutions, bounding theorems, adopted from the theory of plasticity, can be used to generate appropriate load or shakedown limits so that shakedown maps can be drawn which delineate the boundaries between potentially safe and unsafe operating conditions. When the operating point of the contact lies outside the shakedown limit there will be an increment of plastic strain with each application of the load - these can accumulate leading eventually to either component failure or the loss of material by wear. © 2005 Elsevier Ltd. All rights reserved.

UEGO based measurement of EGR rate and residual gas fraction

A technique is presented for measuring the exhaust gas recirculation (EGR) and residual gas fraction (RGF) using a fast UEGO based O2 measurement of the manifold or in-cylinder gases, and of the exhaust gases. The technique has some advantages over the more common CO2-based method. In the case of an RGF measurement, fuel interference must be eliminated and special fuelling arrangements are is required. It is shown how a UEGO-based measurement, though sensitive to reactive species in the exhaust (such as H 2), as a system reports EGR/ RGF rates faithfully. Preliminary tests showed that EGR and RGF measurements using the O2 approach agreed well with CO2-based measurements. © 2011 SAE International.

Oxidation of residual lipids in fish protein concentrates and its effect on the nutritional quality of the protein

The paper reviews the work reported on the changes in the nutritive value of fish protein concentrates (FPC) during, storage, with special emphasis on the effects of the interactions between oxidised residual lipids and proteins of the FPC. Theories on the oxidised lipid-protein interactions are reviewed and the nutritional significance of these reactions is discussed.